[{"Name":"Getting Started","TopicPlaylistFirstVideoID":0,"Duration":null,"Videos":[{"Watched":false,"Name":"Downloading Fusion 360 for Personal Use (free license)","Duration":"4m 4s","ChapterTopicVideoID":27779,"CourseChapterTopicPlaylistID":275346,"HasSubtitles":true,"ThumbnailPath":null,"UploadDate":null,"DurationForVideoObject":null,"Description":null,"MetaTitle":null,"MetaDescription":null,"Canonical":null,"VideoComments":[],"Subtitles":[{"Start":"00:02.110 ","End":"00:03.000","Text":"Kevin Kennedy: By the end of this"},{"Start":"00:03.000 ","End":"00:04.479","Text":"short walkthrough, you’ll have"},{"Start":"00:04.480 ","End":"00:06.620","Text":"Fusion 360 up and running with"},{"Start":"00:06.620 ","End":"00:08.729","Text":"the free Personal Use license."},{"Start":"00:10.580 ","End":"00:12.590","Text":"First off, be sure to read the license"},{"Start":"00:12.590 ","End":"00:14.949","Text":"qualifications that I’ve outlined on my"},{"Start":"00:14.950 ","End":"00:17.399","Text":"webpage, where you’re watching this video."},{"Start":"00:18.470 ","End":"00:20.340","Text":"The most important qualification to"},{"Start":"00:20.340 ","End":"00:22.860","Text":"note is that the Personal Use license"},{"Start":"00:22.960 ","End":"00:25.849","Text":"only allows you to make up to $1,000 a"},{"Start":"00:25.850 ","End":"00:29.800","Text":"year annually via the hobby or business"},{"Start":"00:29.840 ","End":"00:32.150","Text":"that you’re using Fusion 360 for."},{"Start":"00:32.830 ","End":"00:34.920","Text":"If you are making more than that, with"},{"Start":"00:34.920 ","End":"00:37.360","Text":"your use of Fusion 360, then you’ll need"},{"Start":"00:37.370 ","End":"00:40.240","Text":"to upgrade to a Commercial-use license."},{"Start":"00:41.490 ","End":"00:44.000","Text":"After confirming that you do qualify, the"},{"Start":"00:44.000 ","End":"00:46.080","Text":"first step will be to go to the Official"},{"Start":"00:46.130 ","End":"00:49.240","Text":"Autodesk page for Fusion 360 for Personal"},{"Start":"00:49.240 ","End":"00:52.270","Text":"Use, which I’ve linked to on this page."},{"Start":"00:54.039 ","End":"00:55.690","Text":"Once you arrive on the page,"},{"Start":"00:55.700 ","End":"00:56.860","Text":"you’ll need to select the"},{"Start":"00:56.880 ","End":"00:58.900","Text":"orange “Get Started Now” button."},{"Start":"00:59.890 ","End":"01:01.930","Text":"The button will link you to the bottom"},{"Start":"01:01.930 ","End":"01:03.919","Text":"of the page, where you’re then prompted"},{"Start":"01:03.920 ","End":"01:06.330","Text":"to sign in with your Autodesk account."},{"Start":"01:07.309 ","End":"01:09.380","Text":"If you already have an Autodesk account"},{"Start":"01:09.420 ","End":"01:11.579","Text":"from another Autodesk product, then you"},{"Start":"01:11.580 ","End":"01:13.860","Text":"can go ahead and use that to sign in."},{"Start":"01:14.660 ","End":"01:16.899","Text":"Otherwise, after clicking the orange"},{"Start":"01:16.900 ","End":"01:18.259","Text":"“Sign In” button, you’ll need to"},{"Start":"01:18.260 ","End":"01:20.679","Text":"create a new Autodesk account."},{"Start":"01:22.010 ","End":"01:24.019","Text":"I’ll select the “Create Account” link."},{"Start":"01:24.960 ","End":"01:27.489","Text":"The account creation is pretty standard."},{"Start":"01:27.599 ","End":"01:31.670","Text":"Simply fill out your name, email, confirm"},{"Start":"01:31.670 ","End":"01:34.380","Text":"your email, and then type out a password."},{"Start":"01:34.920 ","End":"01:36.970","Text":"You’ll also need to select the checkbox"},{"Start":"01:36.990 ","End":"01:38.679","Text":"to agree to the Autodesk Terms of"},{"Start":"01:38.679 ","End":"01:41.010","Text":"Use and their Privacy Statement."},{"Start":"01:42.160 ","End":"01:44.139","Text":"Finally, once you have all of your"},{"Start":"01:44.139 ","End":"01:46.190","Text":"information filled out, simply click"},{"Start":"01:46.190 ","End":"01:48.129","Text":"that blue “Create Account” button."},{"Start":"01:49.360 ","End":"01:51.230","Text":"After creating your account, you’ll be"},{"Start":"01:51.230 ","End":"01:53.510","Text":"given the option to opt-in or out of"},{"Start":"01:53.620 ","End":"01:56.100","Text":"marketing and other Autodesk emails."},{"Start":"01:56.980 ","End":"01:58.359","Text":"Then, you’ll want to click"},{"Start":"01:58.360 ","End":"01:59.540","Text":"the blue “Done” button."},{"Start":"02:00.870 ","End":"02:02.580","Text":"You’ll then be redirected back"},{"Start":"02:02.580 ","End":"02:04.389","Text":"to the Personal Use home page."},{"Start":"02:04.859 ","End":"02:07.050","Text":"From here, you’ll see that it may take"},{"Start":"02:07.060 ","End":"02:09.250","Text":"up to 30 minutes for your new account to"},{"Start":"02:09.250 ","End":"02:12.150","Text":"work and I do recommend that you take a"},{"Start":"02:12.160 ","End":"02:14.750","Text":"30-minute break before trying to log in."},{"Start":"02:15.889 ","End":"02:17.580","Text":"In the meantime, if you haven’t"},{"Start":"02:17.580 ","End":"02:19.419","Text":"already downloaded Fusion 360,"},{"Start":"02:20.070 ","End":"02:21.489","Text":"then you can go ahead and get"},{"Start":"02:21.490 ","End":"02:23.470","Text":"that downloaded and installed."},{"Start":"02:24.540 ","End":"02:26.440","Text":"If you scroll up a little bit, you’ll"},{"Start":"02:26.440 ","End":"02:28.450","Text":"see either the Get Started text"},{"Start":"02:28.500 ","End":"02:30.920","Text":"or the Download Fusion 360 link."},{"Start":"02:31.920 ","End":"02:34.200","Text":"After selecting the link, the website"},{"Start":"02:34.200 ","End":"02:35.929","Text":"will automatically detect which"},{"Start":"02:35.929 ","End":"02:38.249","Text":"operating system you’re using, and"},{"Start":"02:38.250 ","End":"02:40.089","Text":"it will then automatically start"},{"Start":"02:40.100 ","End":"02:42.429","Text":"the download of the respective copy."},{"Start":"02:43.619 ","End":"02:45.560","Text":"At this point, you’ll need to follow the"},{"Start":"02:45.560 ","End":"02:47.790","Text":"standard process for installing a new"},{"Start":"02:47.790 ","End":"02:50.250","Text":"application on your operating system."},{"Start":"02:50.760 ","End":"02:52.250","Text":"This will vary a little"},{"Start":"02:52.730 ","End":"02:53.780","Text":"depending on whether you’re"},{"Start":"02:53.780 ","End":"02:55.969","Text":"on a Mac or Windows computer."},{"Start":"02:57.230 ","End":"03:00.020","Text":"Once Fusion 360 is successfully installed"},{"Start":"03:00.049 ","End":"03:01.820","Text":"you can go ahead and open it up."},{"Start":"03:02.650 ","End":"03:04.380","Text":"You’ll then be prompted to sign in"},{"Start":"03:04.390 ","End":"03:06.950","Text":"with your Autodesk username or email"},{"Start":"03:07.170 ","End":"03:09.109","Text":"along with your account password."},{"Start":"03:09.820 ","End":"03:11.809","Text":"However, remember that you do"},{"Start":"03:11.809 ","End":"03:13.770","Text":"need to wait at least 30 minutes"},{"Start":"03:13.780 ","End":"03:15.369","Text":"from your account creation."},{"Start":"03:16.410 ","End":"03:18.149","Text":"After signing in, you’re all"},{"Start":"03:18.150 ","End":"03:19.960","Text":"set and ready to start learning"},{"Start":"03:19.980 ","End":"03:22.149","Text":"and designing in Fusion 360."},{"Start":"03:24.270 ","End":"03:26.380","Text":"To double-check your license type you can"},{"Start":"03:26.380 ","End":"03:28.569","Text":"always find the “About Autodesk Fusion"},{"Start":"03:28.570 ","End":"03:31.560","Text":"360” option from the Application’s menu."},{"Start":"03:32.330 ","End":"03:34.660","Text":"The dialog will then state the version"},{"Start":"03:34.740 ","End":"03:37.190","Text":"of Fusion 360 that you have installed,"},{"Start":"03:37.640 ","End":"03:40.310","Text":"the active license type you have, and"},{"Start":"03:40.310 ","End":"03:42.590","Text":"the date your license type expires."},{"Start":"03:43.700 ","End":"03:45.900","Text":"With the current Personal Use license,"},{"Start":"03:45.920 ","End":"03:48.270","Text":"your license will expire in 1 year."},{"Start":"03:48.710 ","End":"03:50.579","Text":"But don’t worry, at the end of the"},{"Start":"03:50.580 ","End":"03:52.300","Text":"year, you’ll then be able to renew"},{"Start":"03:52.300 ","End":"03:54.440","Text":"your free license for one more year."},{"Start":"03:54.980 ","End":"03:56.680","Text":"You can then continue to renew"},{"Start":"03:56.680 ","End":"03:58.940","Text":"your license every year unless"},{"Start":"03:58.940 ","End":"04:00.340","Text":"the license qualifications"},{"Start":"04:00.340 ","End":"04:03.010","Text":"change or you no longer qualify."}],"ID":28962},{"Watched":false,"Name":"Navigating the Fusion 360 User Interface","Duration":"8m ","ChapterTopicVideoID":27780,"CourseChapterTopicPlaylistID":275346,"HasSubtitles":true,"ThumbnailPath":null,"UploadDate":null,"DurationForVideoObject":null,"Description":null,"MetaTitle":null,"MetaDescription":null,"Canonical":null,"VideoComments":[],"Subtitles":[{"Start":"00:01.650 ","End":"00:03.230","Text":"Kevin Kennedy: In this tutorial, I want"},{"Start":"00:03.240 ","End":"00:05.180","Text":"to lay the groundwork for all of my"},{"Start":"00:05.180 ","End":"00:07.300","Text":"tutorials, by giving you an overview"},{"Start":"00:07.350 ","End":"00:10.020","Text":"of Fusion 360’s latest user interface."},{"Start":"00:12.020 ","End":"00:14.270","Text":"Be sure to stick around until the very"},{"Start":"00:14.299 ","End":"00:16.419","Text":"end of this video, as I’ll be showing"},{"Start":"00:16.420 ","End":"00:18.740","Text":"you two pro tricks that almost all"},{"Start":"00:18.740 ","End":"00:20.900","Text":"beginners wish they had known earlier."},{"Start":"00:21.440 ","End":"00:23.750","Text":"The Fusion 360 user interface can"},{"Start":"00:23.750 ","End":"00:26.470","Text":"be broken down into 9 main sections."},{"Start":"00:26.960 ","End":"00:29.320","Text":"For your convenience, I’ve also outlined"},{"Start":"00:29.330 ","End":"00:31.359","Text":"all of these sections on my website,"},{"Start":"00:31.610 ","End":"00:33.519","Text":"so you can reference them as needed."},{"Start":"00:34.629 ","End":"00:37.190","Text":"When you log into Fusion 360 for the first"},{"Start":"00:37.200 ","End":"00:39.720","Text":"time you’ll start with a blank project."},{"Start":"00:40.610 ","End":"00:42.440","Text":"The first thing you’ll see in the top"},{"Start":"00:42.440 ","End":"00:44.760","Text":"left corner is the Application Bar."},{"Start":"00:45.370 ","End":"00:46.499","Text":"Within the Application"},{"Start":"00:46.500 ","End":"00:48.490","Text":"Bar, there are 4 key areas."},{"Start":"00:49.130 ","End":"00:51.470","Text":"First, you can access the Data Panel,"},{"Start":"00:51.509 ","End":"00:53.389","Text":"which houses your design files."},{"Start":"00:54.180 ","End":"00:57.160","Text":"The next item is the file menu, which lets"},{"Start":"00:57.160 ","End":"01:00.220","Text":"you create, export, or share your designs."},{"Start":"01:01.010 ","End":"01:02.949","Text":"You can then save your designs or"},{"Start":"01:02.950 ","End":"01:05.140","Text":"select the undo and redo buttons"},{"Start":"01:05.170 ","End":"01:07.359","Text":"to revert your most recent actions."},{"Start":"01:08.599 ","End":"01:10.669","Text":"Across the top, you’ll also see the"},{"Start":"01:10.670 ","End":"01:13.430","Text":"tabs, which represent each design file."},{"Start":"01:13.980 ","End":"01:16.660","Text":"Each tab will display a file name and the"},{"Start":"01:16.660 ","End":"01:19.380","Text":"version number; however, if you have a"},{"Start":"01:19.380 ","End":"01:21.590","Text":"large number of files open, then you’ll"},{"Start":"01:21.590 ","End":"01:23.720","Text":"only be able to see the name on hover."},{"Start":"01:24.150 ","End":"01:25.620","Text":"This works in a similar manner"},{"Start":"01:25.620 ","End":"01:27.440","Text":"to the tabs in your web browser."},{"Start":"01:28.719 ","End":"01:30.770","Text":"Let’s talk about the Data Panel a bit"},{"Start":"01:30.770 ","End":"01:32.750","Text":"more, as this can be treated as the"},{"Start":"01:32.750 ","End":"01:35.190","Text":"second key component of the interface."},{"Start":"01:36.030 ","End":"01:38.369","Text":"If you toggle open the data panel, you’ll"},{"Start":"01:38.370 ","End":"01:40.570","Text":"see that you can create new Projects."},{"Start":"01:41.880 ","End":"01:43.869","Text":"You can then create new Folders,"},{"Start":"01:43.889 ","End":"01:45.789","Text":"within each project, to further"},{"Start":"01:45.789 ","End":"01:47.489","Text":"organize your design files."},{"Start":"01:48.459 ","End":"01:50.120","Text":"The Data Panel also allows you"},{"Start":"01:50.120 ","End":"01:51.669","Text":"to manage other users who are"},{"Start":"01:51.700 ","End":"01:54.070","Text":"collaborating on your projects, but"},{"Start":"01:54.070 ","End":"01:55.940","Text":"note that there are restrictions based"},{"Start":"01:55.940 ","End":"01:57.890","Text":"on which license type you’re using."},{"Start":"01:58.789 ","End":"02:00.179","Text":"Any time that you’re coming back"},{"Start":"02:00.179 ","End":"02:03.160","Text":"to open a project, you’ll simply"},{"Start":"02:03.160 ","End":"02:05.220","Text":"need to double-click on the file or"},{"Start":"02:05.220 ","End":"02:07.730","Text":"right-click and select the “open” option."},{"Start":"02:09.669 ","End":"02:11.900","Text":"In the upper-righthand corner, you’ll see"},{"Start":"02:11.900 ","End":"02:14.590","Text":"the user profile and help section, which"},{"Start":"02:14.590 ","End":"02:17.280","Text":"is the third main element of Fusion 360."},{"Start":"02:19.080 ","End":"02:20.519","Text":"It’s here where you can view your"},{"Start":"02:20.530 ","End":"02:23.429","Text":"job status, Fusion 360 update"},{"Start":"02:23.480 ","End":"02:28.340","Text":"statuses, and online/offline statuses."},{"Start":"02:28.350 ","End":"02:30.480","Text":"Under your username, will be a handful"},{"Start":"02:30.480 ","End":"02:32.500","Text":"of account settings and preferences."},{"Start":"02:33.300 ","End":"02:35.700","Text":"As you continue to learn Fusion 360,"},{"Start":"02:35.889 ","End":"02:37.809","Text":"you’ll want to familiarize yourself with"},{"Start":"02:37.809 ","End":"02:40.120","Text":"the default preferences, and you can"},{"Start":"02:40.120 ","End":"02:42.380","Text":"change them to better suit your workflow."},{"Start":"02:43.400 ","End":"02:44.579","Text":"To the right of your username is"},{"Start":"02:45.110 ","End":"02:46.780","Text":"the help icon, which gives you"},{"Start":"02:46.780 ","End":"02:49.209","Text":"quick access to the forums and"},{"Start":"02:49.220 ","End":"02:51.140","Text":"helpful troubleshooting articles."},{"Start":"02:52.900 ","End":"02:54.399","Text":"Next, you’ll see the main toolbar."},{"Start":"02:55.239 ","End":"02:57.309","Text":"The toolbar allows you to select what type"},{"Start":"02:57.309 ","End":"02:59.060","Text":"of workspace you would like to work in."},{"Start":"02:59.590 ","End":"03:01.410","Text":"It’s important to note that the tools in"},{"Start":"03:01.410 ","End":"03:04.049","Text":"the toolbar will differ in each workspace."},{"Start":"03:04.690 ","End":"03:06.269","Text":"Within each toolbar, there are"},{"Start":"03:06.270 ","End":"03:08.570","Text":"also tabs, which further organize"},{"Start":"03:08.580 ","End":"03:10.640","Text":"the tools into logical groupings."},{"Start":"03:11.500 ","End":"03:13.310","Text":"As you start to discover your own"},{"Start":"03:13.310 ","End":"03:15.410","Text":"common workflows you can customize"},{"Start":"03:15.429 ","End":"03:17.369","Text":"and rearrange your toolbar features."},{"Start":"03:19.300 ","End":"03:21.730","Text":"Next, you\u0027ll see the Fusion 360 Browser."},{"Start":"03:23.830 ","End":"03:25.670","Text":"The browser lists objects in your"},{"Start":"03:25.670 ","End":"03:28.240","Text":"design, including planes, sketches,"},{"Start":"03:28.260 ","End":"03:30.330","Text":"parts, assemblies, and so on."},{"Start":"03:30.920 ","End":"03:32.210","Text":"You can think of the Browser"},{"Start":"03:32.230 ","End":"03:33.609","Text":"as your file structure."},{"Start":"03:34.160 ","End":"03:35.999","Text":"Within the Browser, you can change"},{"Start":"03:36.020 ","End":"03:38.620","Text":"the visibility of objects as well"},{"Start":"03:38.620 ","End":"03:40.370","Text":"as change your document units."},{"Start":"03:42.530 ","End":"03:44.600","Text":"Let\u0027s now talk about the ViewCube or the"},{"Start":"03:44.750 ","End":"03:47.080","Text":"3D cube in the upper right-hand corner."},{"Start":"03:47.830 ","End":"03:49.649","Text":"The ViewCube allows you to orbit"},{"Start":"03:49.650 ","End":"03:51.410","Text":"your design or view the design"},{"Start":"03:51.429 ","End":"03:53.239","Text":"from standard view positions."},{"Start":"03:54.029 ","End":"03:56.589","Text":"You can either select faces, corners,"},{"Start":"03:56.620 ","End":"03:59.190","Text":"or the arrows, or you can simply"},{"Start":"03:59.190 ","End":"04:00.989","Text":"click and drag the ViewCube around."},{"Start":"04:01.610 ","End":"04:03.609","Text":"You can also hit the home icon, which"},{"Start":"04:03.610 ","End":"04:05.449","Text":"is next to the ViewCube, to view the"},{"Start":"04:05.450 ","End":"04:07.709","Text":"model in the default home position."},{"Start":"04:09.809 ","End":"04:12.399","Text":"The middle section of Fusion 360"},{"Start":"04:12.450 ","End":"04:14.149","Text":"is where you’ll be doing sketching"},{"Start":"04:14.190 ","End":"04:15.610","Text":"and all of your design work."},{"Start":"04:16.100 ","End":"04:17.620","Text":"Therefore, this section is"},{"Start":"04:17.620 ","End":"04:19.320","Text":"referred to as the Canvas."},{"Start":"04:20.000 ","End":"04:21.860","Text":"Within the Canvas, you can access"},{"Start":"04:21.899 ","End":"04:23.819","Text":"the “marking menu,” which is also"},{"Start":"04:23.820 ","End":"04:25.890","Text":"referred to as the right-click menu."},{"Start":"04:26.820 ","End":"04:28.810","Text":"If you right-click you’ll see frequently"},{"Start":"04:28.810 ","End":"04:30.780","Text":"used commands, along with the ability"},{"Start":"04:30.780 ","End":"04:32.840","Text":"to change workspaces, without having"},{"Start":"04:32.840 ","End":"04:34.980","Text":"to go to the upper lefthand corner."},{"Start":"04:36.160 ","End":"04:38.250","Text":"To fully utilize the marking-menu,"},{"Start":"04:38.309 ","End":"04:40.090","Text":"you’ll want to memorize the position"},{"Start":"04:40.139 ","End":"04:41.820","Text":"of these features at the top."},{"Start":"04:42.500 ","End":"04:44.340","Text":"The marking-menu intends to give"},{"Start":"04:44.340 ","End":"04:46.569","Text":"users the ability to right-click and"},{"Start":"04:46.570 ","End":"04:49.020","Text":"drag at the same time, towards the"},{"Start":"04:49.020 ","End":"04:51.120","Text":"feature you want to quickly access."},{"Start":"04:51.880 ","End":"04:53.620","Text":"For example, I’ll right-click"},{"Start":"04:53.620 ","End":"04:55.360","Text":"and drag towards two-o-clock, to"},{"Start":"04:55.360 ","End":"04:57.190","Text":"activate the Press Pull command."},{"Start":"04:59.059 ","End":"05:00.880","Text":"The second to last section is the"},{"Start":"05:00.880 ","End":"05:03.049","Text":"navigation bar and display settings."},{"Start":"05:03.910 ","End":"05:05.930","Text":"The navigation bar contains commands"},{"Start":"05:05.940 ","End":"05:08.790","Text":"used to zoom, pan, and orbit your design."},{"Start":"05:09.500 ","End":"05:11.070","Text":"These will give you a little bit more"},{"Start":"05:11.070 ","End":"05:13.230","Text":"control than the use of the ViewCube."},{"Start":"05:14.030 ","End":"05:16.099","Text":"On the other hand, the display settings"},{"Start":"05:16.099 ","End":"05:18.070","Text":"control the appearance of the interface."},{"Start":"05:18.679 ","End":"05:20.570","Text":"It’s right here that you can turn on and"},{"Start":"05:20.570 ","End":"05:22.839","Text":"off ground shadows and other effects,"},{"Start":"05:23.279 ","End":"05:25.340","Text":"turn grids on or off, or view your"},{"Start":"05:25.340 ","End":"05:27.419","Text":"design from multiple views at once."},{"Start":"05:29.220 ","End":"05:30.620","Text":"Last but not least we have"},{"Start":"05:30.620 ","End":"05:32.150","Text":"the timeline at the bottom."},{"Start":"05:32.540 ","End":"05:34.169","Text":"The timeline lists the order of"},{"Start":"05:34.170 ","End":"05:36.460","Text":"operations performed on your design."},{"Start":"05:37.280 ","End":"05:39.029","Text":"Double-click on timeline features"},{"Start":"05:39.030 ","End":"05:40.740","Text":"to quickly edit their properties."},{"Start":"05:41.680 ","End":"05:43.799","Text":"You can also right-click operations"},{"Start":"05:43.830 ","End":"05:45.460","Text":"to make additional changes."},{"Start":"05:46.420 ","End":"05:48.850","Text":"Because Fusion 360 is a Parametric"},{"Start":"05:48.880 ","End":"05:51.240","Text":"Modeling program, you can also drag"},{"Start":"05:51.240 ","End":"05:53.009","Text":"the operations around to change"},{"Start":"05:53.010 ","End":"05:54.620","Text":"the order they are calculated."},{"Start":"05:55.280 ","End":"05:57.219","Text":"However, you’ll want to be careful"},{"Start":"05:57.270 ","End":"05:59.219","Text":"as changing the order can also cause"},{"Start":"05:59.240 ","End":"06:01.140","Text":"errors or problems with your model."},{"Start":"06:02.330 ","End":"06:04.200","Text":"You’ve now made it through all 9"},{"Start":"06:04.210 ","End":"06:06.650","Text":"of the key sections of Fusion 360."},{"Start":"06:06.990 ","End":"06:08.599","Text":"To reward you, I want to share"},{"Start":"06:08.599 ","End":"06:10.190","Text":"two pro-tricks that are always"},{"Start":"06:10.190 ","End":"06:11.599","Text":"overlooked by beginners."},{"Start":"06:12.530 ","End":"06:14.459","Text":"First, is the ability to set your"},{"Start":"06:14.460 ","End":"06:16.629","Text":"home position to the desired view."},{"Start":"06:17.410 ","End":"06:19.349","Text":"If you’re working on a more in-depth"},{"Start":"06:19.350 ","End":"06:21.610","Text":"project, such as this bike frame,"},{"Start":"06:22.000 ","End":"06:23.510","Text":"then you may find yourself wanting"},{"Start":"06:23.510 ","End":"06:25.250","Text":"to set the home position to the"},{"Start":"06:25.250 ","End":"06:27.200","Text":"area you’re currently working on."},{"Start":"06:27.580 ","End":"06:29.090","Text":"To set the home position,"},{"Start":"06:29.099 ","End":"06:30.279","Text":"you’ll first want to orient"},{"Start":"06:30.280 ","End":"06:32.079","Text":"the model to the desired view."},{"Start":"06:34.070 ","End":"06:35.840","Text":"Then, simply click the caret"},{"Start":"06:35.879 ","End":"06:38.500","Text":"toggle next to the ViewCube."},{"Start":"06:38.500 ","End":"06:40.610","Text":"You’ll need to select “Set current view"},{"Start":"06:40.610 ","End":"06:42.719","Text":"as Home” and then you can choose either"},{"Start":"06:42.730 ","End":"06:44.750","Text":"the “Fixed Distance” or “Fit to view”."},{"Start":"06:45.510 ","End":"06:47.230","Text":"The Fixed distance will set the"},{"Start":"06:47.230 ","End":"06:48.999","Text":"view to how your model appears;"},{"Start":"06:49.009 ","End":"06:53.020","Text":"whereas, the Fit to view will ensure"},{"Start":"06:53.020 ","End":"06:55.180","Text":"your entire model is in the view."},{"Start":"06:55.960 ","End":"06:57.789","Text":"If I now change the view and"},{"Start":"06:57.790 ","End":"06:59.760","Text":"select the Home icon, you’ll see it"},{"Start":"06:59.760 ","End":"07:01.810","Text":"reverts to the new home position."},{"Start":"07:02.370 ","End":"07:04.440","Text":"This can save you a ton of time as"},{"Start":"07:04.440 ","End":"07:05.859","Text":"your modeling, especially as you’re"},{"Start":"07:05.880 ","End":"07:07.799","Text":"working on more in-depth projects."},{"Start":"07:09.000 ","End":"07:11.200","Text":"You can also reset the home position"},{"Start":"07:11.209 ","End":"07:13.420","Text":"back to the standard isometric view."},{"Start":"07:14.670 ","End":"07:16.890","Text":"The second pro-tip is with the grid that"},{"Start":"07:16.890 ","End":"07:19.140","Text":"you see while working in Fusion 360."},{"Start":"07:19.790 ","End":"07:22.280","Text":"By default, the grid is adaptive."},{"Start":"07:22.870 ","End":"07:24.590","Text":"This means, when you zoom in and out,"},{"Start":"07:24.599 ","End":"07:26.930","Text":"your grid spacing will change accordingly."},{"Start":"07:28.480 ","End":"07:29.749","Text":"There may be a time where you’re"},{"Start":"07:29.750 ","End":"07:31.969","Text":"designing a product or object based"},{"Start":"07:31.970 ","End":"07:34.130","Text":"on a grid or set of increments."},{"Start":"07:34.930 ","End":"07:36.410","Text":"If that is the case, then you"},{"Start":"07:36.410 ","End":"07:38.170","Text":"can set the grid to stay fixed"},{"Start":"07:38.170 ","End":"07:39.729","Text":"to a specified increment."},{"Start":"07:40.660 ","End":"07:42.049","Text":"Select the Grids and Snaps"},{"Start":"07:42.050 ","End":"07:43.380","Text":"option at the bottom."},{"Start":"07:44.429 ","End":"07:46.159","Text":"We’ll then have to select “Set"},{"Start":"07:46.170 ","End":"07:47.610","Text":"Increments” and we’ll have to"},{"Start":"07:47.610 ","End":"07:49.530","Text":"switch this to the “fixed” option."},{"Start":"07:50.790 ","End":"07:52.510","Text":"You can then define the increments"},{"Start":"07:52.560 ","End":"07:54.130","Text":"of your grid, and these will no"},{"Start":"07:54.130 ","End":"07:55.790","Text":"longer change based on your view."}],"ID":28963}],"Thumbnail":null,"ID":275346},{"Name":"Learning Path","TopicPlaylistFirstVideoID":0,"Duration":null,"Videos":[{"Watched":false,"Name":"Day 1 - 3D Model a Brick","Duration":"14m 4s","ChapterTopicVideoID":27781,"CourseChapterTopicPlaylistID":275347,"HasSubtitles":true,"ThumbnailPath":"https://www.proprep.uk/Images/Videos_Thumbnails/27781.jpeg","UploadDate":"2021-12-30T11:56:25.3770000","DurationForVideoObject":"PT14M4S","Description":null,"MetaTitle":"Day 1 - 3D Model a Brick: Video + Workbook | Proprep","MetaDescription":"Learn Fusion 360 in 30 Days for Complete Beginners - Learning Path. Watch the video made by an expert in the field. Download the workbook and maximize your learning.","Canonical":"https://www.proprep.uk/general-modules/all/learn-parametric-cad-and-cam-design-with-fusion-360/learn-fusion-360-in-30-days-for-complete-beginners/learning-path/vid28984","VideoComments":[],"Subtitles":[{"Start":"00:00.010 ","End":"00:01.150","Text":"Kevin Kennedy: Hey there, It’s Kevin"},{"Start":"00:01.150 ","End":"00:02.797","Text":"Kennedy, and welcome to this remake of"},{"Start":"00:02.797 ","End":"00:06.130","Text":"Day #1 of Learn Fusion 360 in 30 days."},{"Start":"00:07.100 ","End":"00:09.430","Text":"By the end of this tutorial, you’ll"},{"Start":"00:09.430 ","End":"00:11.270","Text":"be able to create a lego brick."},{"Start":"00:12.270 ","End":"00:13.189","Text":"We’ll take a look at how to"},{"Start":"00:13.190 ","End":"00:16.120","Text":"create a sketch, use the extrude"},{"Start":"00:16.129 ","End":"00:19.290","Text":"feature, shell an object, and how"},{"Start":"00:19.290 ","End":"00:21.340","Text":"to create a rectangular pattern."},{"Start":"00:21.860 ","End":"00:23.960","Text":"To start off let’s open the data"},{"Start":"00:23.970 ","End":"00:26.520","Text":"panel and create a new project folder."},{"Start":"00:27.119 ","End":"00:28.869","Text":"Click on the data panel icon"},{"Start":"00:28.900 ","End":"00:30.700","Text":"in the upper lefthand corner."},{"Start":"00:31.530 ","End":"00:34.249","Text":"After it opens we’ll click “New Folder”"},{"Start":"00:34.629 ","End":"00:37.720","Text":"and title it “Learn Fusion 360 in 30"},{"Start":"00:37.730 ","End":"00:42.000","Text":"Days.” This will create a new folder"},{"Start":"00:42.010 ","End":"00:44.230","Text":"where we can organize the demo files."},{"Start":"00:45.170 ","End":"00:46.699","Text":"We can also double click on"},{"Start":"00:46.700 ","End":"00:48.449","Text":"the folder to open it, and then"},{"Start":"00:48.450 ","End":"00:51.309","Text":"create another folder...this time"},{"Start":"00:51.320 ","End":"00:54.689","Text":"with the title “Day #1 - Lego.”"},{"Start":"00:56.050 ","End":"00:57.555","Text":"It’s important that you start creating"},{"Start":"00:57.830 ","End":"01:00.059","Text":"a habit of organizing your files,"},{"Start":"01:00.150 ","End":"01:02.210","Text":"otherwise, as you create more models in"},{"Start":"01:02.220 ","End":"01:04.680","Text":"Fusion 360 you’ll find it becomes harder"},{"Start":"01:04.680 ","End":"01:06.640","Text":"to find the file you’re looking for."},{"Start":"01:07.860 ","End":"01:09.720","Text":"For the sake of simplicity, I’ll"},{"Start":"01:09.720 ","End":"01:11.949","Text":"be using the Fusion 360 defaults"},{"Start":"01:11.980 ","End":"01:14.100","Text":"for this entire tutorial series."},{"Start":"01:14.730 ","End":"01:16.410","Text":"To make sure your settings are set"},{"Start":"01:16.410 ","End":"01:18.380","Text":"up the same way you’ll want to click"},{"Start":"01:18.380 ","End":"01:19.649","Text":"on your name in the upper-righthand"},{"Start":"01:20.120 ","End":"01:24.189","Text":"corner, go to preferences, and then"},{"Start":"01:24.190 ","End":"01:26.520","Text":"click the “restore defaults” button"},{"Start":"01:26.589 ","End":"01:28.250","Text":"in the lower corner of the modal."},{"Start":"01:41.030 ","End":"01:43.539","Text":"Then, you’ll want to click apply to make"},{"Start":"01:43.539 ","End":"01:45.639","Text":"sure the defaults are saved and click"},{"Start":"01:45.639 ","End":"01:47.439","Text":"the okay button to close the modal."},{"Start":"01:48.959 ","End":"01:50.190","Text":"The last thing to check"},{"Start":"01:50.210 ","End":"01:51.619","Text":"is your display settings."},{"Start":"01:52.070 ","End":"01:54.190","Text":"Head down to the display settings section"},{"Start":"01:54.230 ","End":"01:56.839","Text":"and go to the “visual style” flyout menu."},{"Start":"01:57.830 ","End":"02:00.130","Text":"For all videos in this series, I will"},{"Start":"02:00.130 ","End":"02:03.199","Text":"have the visual style set to “shaded with"},{"Start":"02:03.210 ","End":"02:06.110","Text":"visible edges only,” which makes it easy"},{"Start":"02:06.110 ","End":"02:08.410","Text":"to see all the outside edges of the model."},{"Start":"02:10.600 ","End":"02:12.500","Text":"The last thing we’ll want to do before we"},{"Start":"02:12.500 ","End":"02:15.049","Text":"get started is set the units for our file."},{"Start":"02:15.700 ","End":"02:17.480","Text":"If you’ve played with legos before"},{"Start":"02:17.509 ","End":"02:18.900","Text":"you’re likely familiar with how"},{"Start":"02:18.900 ","End":"02:21.720","Text":"small a standard 2x4 lego brick is."},{"Start":"02:22.469 ","End":"02:24.539","Text":"Because it’s a fairly small object"},{"Start":"02:24.559 ","End":"02:26.140","Text":"we’ll want to make sure we model it"},{"Start":"02:26.160 ","End":"02:28.350","Text":"in millimeters instead of inches."},{"Start":"02:29.150 ","End":"02:31.400","Text":"To change units simply toggle open"},{"Start":"02:31.400 ","End":"02:36.469","Text":"the document settings folder...and as"},{"Start":"02:36.469 ","End":"02:38.769","Text":"you hover over the units you’ll see a"},{"Start":"02:38.780 ","End":"02:41.180","Text":"button appear that says “change active"},{"Start":"02:41.180 ","End":"02:44.220","Text":"units.” Clicking this button will give"},{"Start":"02:44.220 ","End":"02:46.330","Text":"you the “change active units” dialog"},{"Start":"02:46.330 ","End":"02:49.340","Text":"box, and then you’ll want to select"},{"Start":"02:49.370 ","End":"02:54.140","Text":"“millimeters.” before clicking okay…"},{"Start":"02:55.759 ","End":"02:56.970","Text":"Now, let’s get started with"},{"Start":"02:57.040 ","End":"02:58.800","Text":"3D modeling the lego brick."},{"Start":"02:59.840 ","End":"03:01.730","Text":"The first thing we’ll need to do is create"},{"Start":"03:01.770 ","End":"03:05.230","Text":"a new component, which will help keep"},{"Start":"03:05.240 ","End":"03:07.600","Text":"all of our sketches and bodies together"},{"Start":"03:08.730 ","End":"03:12.010","Text":"should we want to make copies of the lego."},{"Start":"03:13.270 ","End":"03:14.970","Text":"I’ll go much more in-depth into"},{"Start":"03:14.970 ","End":"03:17.050","Text":"bodies and components and why we’re"},{"Start":"03:17.050 ","End":"03:19.950","Text":"doing this in day #13 of this series."},{"Start":"03:21.370 ","End":"03:22.829","Text":"To create a new component go"},{"Start":"03:22.830 ","End":"03:24.720","Text":"to the assemble dropdown menu"},{"Start":"03:24.770 ","End":"03:26.460","Text":"and select \"New Component.\""},{"Start":"03:27.160 ","End":"03:28.990","Text":"Then, you’ll see in the new component"},{"Start":"03:28.990 ","End":"03:31.540","Text":"dialog box that we can name the component."},{"Start":"03:32.090 ","End":"03:34.150","Text":"I’ll type out “Lego” for the name..."},{"Start":"03:34.650 ","End":"03:35.740","Text":"and click okay."},{"Start":"03:38.090 ","End":"03:39.950","Text":"The first step in creating our lego"},{"Start":"03:39.950 ","End":"03:42.200","Text":"block is creating a new sketch…"},{"Start":"03:42.950 ","End":"03:44.810","Text":"In CAD programs, sketches are"},{"Start":"03:44.810 ","End":"03:47.200","Text":"2-Dimensional drawings of shapes that"},{"Start":"03:47.200 ","End":"03:49.380","Text":"we can turn into 3-dimensional shapes."},{"Start":"03:50.469 ","End":"03:52.429","Text":"Under the sketch menu, you’ll notice"},{"Start":"03:52.429 ","End":"03:53.939","Text":"there are a bunch of predetermined"},{"Start":"03:53.940 ","End":"03:56.040","Text":"shapes that save us time."},{"Start":"03:56.990 ","End":"03:58.850","Text":"For the lego brick, we’ll start off"},{"Start":"03:58.860 ","End":"04:01.230","Text":"by clicking on the 2-point rectangle."},{"Start":"04:02.550 ","End":"04:04.570","Text":"When you start creating a sketch you’ll"},{"Start":"04:04.570 ","End":"04:07.030","Text":"have to choose a plane to sketch on."},{"Start":"04:07.809 ","End":"04:09.959","Text":"In this scenario, I’ll choose the top"},{"Start":"04:09.960 ","End":"04:12.570","Text":"plane so our lego is sitting top side up."},{"Start":"04:13.340 ","End":"04:14.910","Text":"Then, I’ll click on the center"},{"Start":"04:14.910 ","End":"04:16.990","Text":"origin and drag it out with my mouse."},{"Start":"04:17.930 ","End":"04:19.820","Text":"As I drag out the rectangle you’ll"},{"Start":"04:19.820 ","End":"04:21.880","Text":"notice dimension boxes pop up."},{"Start":"04:22.639 ","End":"04:26.229","Text":"I’ll type out 15.8mm for the width"},{"Start":"04:26.780 ","End":"04:28.620","Text":"and hit the tab key which will"},{"Start":"04:28.620 ","End":"04:30.050","Text":"lock the dimensions in place."},{"Start":"04:31.750 ","End":"04:34.780","Text":"Then, I’ll type out 31.8mm"},{"Start":"04:34.780 ","End":"04:36.600","Text":"for the length and hit the tab"},{"Start":"04:36.600 ","End":"04:38.090","Text":"key to lock the dimension in."},{"Start":"04:39.750 ","End":"04:41.280","Text":"Then, you’ll see that we have"},{"Start":"04:41.290 ","End":"04:43.150","Text":"to set the rectangle in place…"},{"Start":"04:43.690 ","End":"04:44.970","Text":"I’ll click in the upper-righthand"},{"Start":"04:45.450 ","End":"04:47.279","Text":"corner to set the rectangle."},{"Start":"04:48.580 ","End":"04:50.020","Text":"You’ll find yourself using a"},{"Start":"04:50.020 ","End":"04:51.360","Text":"number of different commands"},{"Start":"04:51.390 ","End":"04:54.060","Text":"as you model in Fusion 360."},{"Start":"04:54.060 ","End":"04:55.030","Text":"Any time that you want to"},{"Start":"04:55.100 ","End":"04:56.979","Text":"exit a command, simply hit the"},{"Start":"04:56.980 ","End":"04:58.749","Text":"escape key on your keyboard."},{"Start":"05:00.340 ","End":"05:02.049","Text":"At this point, we have a nice"},{"Start":"05:02.059 ","End":"05:03.530","Text":"2-dimensional sketch, which"},{"Start":"05:03.530 ","End":"05:06.160","Text":"represents the outline of a lego and"},{"Start":"05:06.160 ","End":"05:08.039","Text":"we need to make it 3-dimensional."},{"Start":"05:08.860 ","End":"05:10.930","Text":"To make it 3-dimensional we’ll use the"},{"Start":"05:10.930 ","End":"05:13.480","Text":"extrude command, which is one of the most"},{"Start":"05:13.480 ","End":"05:15.320","Text":"used commands in the model workspace."},{"Start":"05:16.960 ","End":"05:18.940","Text":"The extrude command can be selected"},{"Start":"05:18.940 ","End":"05:21.219","Text":"from the toolbar, or by hitting"},{"Start":"05:21.219 ","End":"05:23.109","Text":"the keyboard shortcut letter “E.”"},{"Start":"05:24.990 ","End":"05:26.920","Text":"After activating the extrude command"},{"Start":"05:26.950 ","End":"05:28.770","Text":"you’ll be prompted to select any"},{"Start":"05:28.770 ","End":"05:30.750","Text":"profiles that you’d like to extrude."},{"Start":"05:31.730 ","End":"05:33.370","Text":"In our case, we’ll select the"},{"Start":"05:33.370 ","End":"05:35.370","Text":"rectangle, and then for the height,"},{"Start":"05:35.440 ","End":"05:39.070","Text":"we’ll type out 9.6mm and click okay."},{"Start":"05:40.309 ","End":"05:42.540","Text":"I’ll go ahead and hit the “home” icon"},{"Start":"05:42.590 ","End":"05:45.039","Text":"in the upper right-hand corner… it’s"},{"Start":"05:45.040 ","End":"05:48.289","Text":"located just to the left of the viewcube."},{"Start":"05:48.290 ","End":"05:49.830","Text":"You’ll see that clicking on it will give"},{"Start":"05:49.830 ","End":"05:51.900","Text":"us a nice perspective view in the home"},{"Start":"05:51.910 ","End":"05:54.500","Text":"position, and we can see the thickness"},{"Start":"05:54.500 ","End":"05:56.539","Text":"that we created with the extrude command."},{"Start":"05:56.549 ","End":"06:00.439","Text":"Now, If you’re connected to the internet"},{"Start":"06:00.470 ","End":"06:02.720","Text":"Fusion 360 will automatically backup"},{"Start":"06:02.720 ","End":"06:06.479","Text":"your files, but clicking the save icon"},{"Start":"06:08.059 ","End":"06:10.130","Text":"will save versions, which allows you to"},{"Start":"06:10.130 ","End":"06:12.750","Text":"go back to a specific version later on."},{"Start":"06:13.940 ","End":"06:16.349","Text":"Let\u0027s hit the save icon in the application"},{"Start":"06:16.350 ","End":"06:18.759","Text":"bar and title our project “Lego.”"},{"Start":"06:19.740 ","End":"06:21.909","Text":"You’ll also notice that it displays the"},{"Start":"06:21.920 ","End":"06:24.320","Text":"version number next to the title name."},{"Start":"06:26.990 ","End":"06:28.619","Text":"Next, we need to create the"},{"Start":"06:28.620 ","End":"06:30.440","Text":"bumps on the top of the lego."},{"Start":"06:31.080 ","End":"06:33.640","Text":"To do this we’ll draw a circle on the top."},{"Start":"06:34.490 ","End":"06:36.460","Text":"Select the center-circle command from"},{"Start":"06:36.460 ","End":"06:39.280","Text":"the sketch dropdown list or by using"},{"Start":"06:39.280 ","End":"06:42.930","Text":"the keyboard shortcut letter “C.” Then,"},{"Start":"06:43.000 ","End":"06:45.140","Text":"select the top of the brick, and you’ll"},{"Start":"06:45.140 ","End":"06:46.880","Text":"see that Fusion will automatically"},{"Start":"06:46.900 ","End":"06:48.720","Text":"orient the view based on the sketch"},{"Start":"06:48.720 ","End":"06:51.769","Text":"plane, making it easier for us to sketch."},{"Start":"06:53.440 ","End":"06:54.750","Text":"Click on the top for the"},{"Start":"06:54.750 ","End":"06:56.719","Text":"center point of the circle and"},{"Start":"06:56.720 ","End":"06:57.979","Text":"drag it out with your mouse."},{"Start":"06:59.350 ","End":"07:02.700","Text":"Then, type out 5mm, hit the tab"},{"Start":"07:02.700 ","End":"07:03.840","Text":"key to lock the dimension in"},{"Start":"07:03.840 ","End":"07:05.729","Text":"place, and click with your mouse"},{"Start":"07:05.759 ","End":"07:07.279","Text":"to set the circle in place."},{"Start":"07:09.139 ","End":"07:11.139","Text":"Now, hit the keyboard shortcut"},{"Start":"07:11.459 ","End":"07:13.470","Text":"“D”, which is short for dimension."},{"Start":"07:14.490 ","End":"07:17.440","Text":"We’ll want to dimension the"},{"Start":"07:17.440 ","End":"07:18.940","Text":"location of this circle."},{"Start":"07:19.860 ","End":"07:21.730","Text":"Click the center point of the circle"},{"Start":"07:22.110 ","End":"07:24.699","Text":"and the outside of the rectangle."},{"Start":"07:25.469 ","End":"07:27.140","Text":"You’ll notice as I drag out with my"},{"Start":"07:27.140 ","End":"07:29.399","Text":"mouse I can type out a dimension…"},{"Start":"07:29.930 ","End":"07:33.340","Text":"I’ll enter 3.9mm and click enter."},{"Start":"07:35.320 ","End":"07:37.720","Text":"I’ll right-click to select “repeat sketch"},{"Start":"07:37.720 ","End":"07:40.149","Text":"dimension” and I’ll repeat the previous"},{"Start":"07:40.150 ","End":"07:42.980","Text":"steps in the other direction… this time"},{"Start":"07:42.990 ","End":"07:46.140","Text":"also entering 3.9mm for the distance."},{"Start":"07:48.299 ","End":"07:50.140","Text":"At this point, we could go ahead and"},{"Start":"07:50.140 ","End":"07:51.909","Text":"draw all of the other circles one by"},{"Start":"07:51.910 ","End":"07:53.890","Text":"one, but it would be much more efficient"},{"Start":"07:53.900 ","End":"07:56.080","Text":"to use the rectangle pattern feature."},{"Start":"07:56.760 ","End":"07:58.890","Text":"Before we use the pattern feature we’ll"},{"Start":"07:58.890 ","End":"08:00.740","Text":"want to add thickness to the circle."},{"Start":"08:02.090 ","End":"08:03.690","Text":"I’ll hit the keyboard shortcut letter"},{"Start":"08:03.750 ","End":"08:06.770","Text":"“E” for extrude… I’ll select the circle,"},{"Start":"08:07.130 ","End":"08:10.270","Text":"and I’ll enter 1.7mm for the thickness."},{"Start":"08:12.110 ","End":"08:13.670","Text":"Using the viewcube we can look at"},{"Start":"08:13.670 ","End":"08:15.339","Text":"this from a different view to check"},{"Start":"08:15.340 ","End":"08:17.180","Text":"the thickness that we just added."},{"Start":"08:20.540 ","End":"08:21.460","Text":"Now we’ll want to use the"},{"Start":"08:21.460 ","End":"08:21.461","Text":"rectangle pattern feature to"},{"Start":"08:21.461 ","End":"08:21.464","Text":"create the rest of the circles."},{"Start":"08:21.464 ","End":"08:21.468","Text":"Go to the create dropdown menu, find"},{"Start":"08:21.468 ","End":"08:21.478","Text":"the pattern flyout folder, and then"},{"Start":"08:21.478 ","End":"08:23.080","Text":"select the rectangular pattern feature."},{"Start":"08:35.010 ","End":"08:36.409","Text":"The first thing in the dialog"},{"Start":"08:36.419 ","End":"08:38.200","Text":"box is the pattern type."},{"Start":"08:38.970 ","End":"08:40.899","Text":"It defaulted to “faces” but we’ll"},{"Start":"08:40.900 ","End":"08:42.860","Text":"want to change this to “features”..."},{"Start":"08:43.659 ","End":"08:45.300","Text":"Which will allow us to select the"},{"Start":"08:45.300 ","End":"08:48.189","Text":"extrude feature in the timeline below."},{"Start":"08:48.270 ","End":"08:49.459","Text":"You’ll notice that it turns"},{"Start":"08:49.460 ","End":"08:50.949","Text":"blue when it’s selected."},{"Start":"08:51.840 ","End":"08:53.970","Text":"For the direction, we’ll need to select"},{"Start":"08:53.970 ","End":"08:55.939","Text":"something that follows the length of the"},{"Start":"08:55.940 ","End":"08:59.190","Text":"brick...so we can simply select the edge."},{"Start":"09:00.619 ","End":"09:02.209","Text":"Then you’ll see that we can type"},{"Start":"09:02.210 ","End":"09:03.920","Text":"out 4 for the number of copies to"},{"Start":"09:03.920 ","End":"09:07.220","Text":"pattern and 24mm for the distance."},{"Start":"09:07.230 ","End":"09:10.370","Text":"Then, you can activate the other"},{"Start":"09:10.370 ","End":"09:12.689","Text":"direction by selecting the other arrow."},{"Start":"09:13.820 ","End":"09:15.790","Text":"We’ll want to type out 2 for the number"},{"Start":"09:15.790 ","End":"09:20.080","Text":"to copy and 8mm for the distance… and"},{"Start":"09:20.080 ","End":"09:21.720","Text":"you’ll see that it gives us a nice"},{"Start":"09:21.720 ","End":"09:24.710","Text":"preview...if everything looks good"},{"Start":"09:24.810 ","End":"09:27.690","Text":"you can click okay in the dialog box."},{"Start":"09:29.140 ","End":"09:31.599","Text":"Next, we’ll want to hollow"},{"Start":"09:31.599 ","End":"09:32.439","Text":"out the bottom of the lego."},{"Start":"09:32.579 ","End":"09:34.260","Text":"To do this, we can use the Fusion"},{"Start":"09:34.260 ","End":"09:37.150","Text":"360 shell command, which allows us to"},{"Start":"09:37.170 ","End":"09:39.700","Text":"easily hollow out 3-dimensional bodies."},{"Start":"09:40.480 ","End":"09:42.680","Text":"Use the view cube to look at the bottom"},{"Start":"09:42.680 ","End":"09:45.489","Text":"of the lego… then, select the “shell”"},{"Start":"09:45.490 ","End":"09:47.990","Text":"command from the modify dropdown list."},{"Start":"09:49.290 ","End":"09:51.870","Text":"For the faces/body, we’ll want to"},{"Start":"09:51.870 ","End":"09:54.320","Text":"select the bottom face, as that’s"},{"Start":"09:54.350 ","End":"09:56.050","Text":"the area we’d like to shell."},{"Start":"09:57.420 ","End":"09:59.420","Text":"Then, you’ll see that it prompts us to"},{"Start":"09:59.420 ","End":"10:03.360","Text":"type out an inside thickness of 1.49mm."},{"Start":"10:04.970 ","End":"10:06.389","Text":"You’ll notice that it gives us a"},{"Start":"10:06.400 ","End":"10:08.520","Text":"nice preview of the shell, and we can"},{"Start":"10:08.520 ","End":"10:10.720","Text":"click okay to confirm the results."},{"Start":"10:12.320 ","End":"10:14.199","Text":"The last thing we need to do is"},{"Start":"10:14.200 ","End":"10:16.310","Text":"create the 3 center columns at the"},{"Start":"10:16.320 ","End":"10:18.140","Text":"bottom of the lego, that allows"},{"Start":"10:18.140 ","End":"10:20.190","Text":"legos to snap into one another."},{"Start":"10:21.630 ","End":"10:23.130","Text":"We want to make sure that we’re creating"},{"Start":"10:23.130 ","End":"10:25.579","Text":"them off of the inside plane of the lego."},{"Start":"10:26.270 ","End":"10:27.890","Text":"I’ll select the plane as you’ll"},{"Start":"10:27.890 ","End":"10:30.509","Text":"see highlighted in blue, then I’ll"},{"Start":"10:30.510 ","End":"10:33.090","Text":"right-click and select “create sketch”..."},{"Start":"10:33.810 ","End":"10:35.130","Text":"and again, Fusion will"},{"Start":"10:35.640 ","End":"10:36.810","Text":"automatically reorient the"},{"Start":"10:36.810 ","End":"10:40.160","Text":"view based on our sketch plane."},{"Start":"10:40.349 ","End":"10:42.079","Text":"I’ll hit the keyboard shortcut letter"},{"Start":"10:42.160 ","End":"10:45.069","Text":"“L” for a line, and I’m going to select"},{"Start":"10:45.150 ","End":"10:47.689","Text":"“construction” in the dialog box."},{"Start":"10:48.719 ","End":"10:50.430","Text":"Construction lines let us create"},{"Start":"10:50.430 ","End":"10:52.430","Text":"sketch geometry that is only"},{"Start":"10:52.430 ","End":"10:54.070","Text":"used for reference purposes."},{"Start":"10:55.700 ","End":"10:57.549","Text":"To create this line I will move my"},{"Start":"10:57.559 ","End":"10:59.530","Text":"mouse cursor over these recessed"},{"Start":"10:59.530 ","End":"11:01.720","Text":"circles… and you’ll see that it lets"},{"Start":"11:01.720 ","End":"11:03.710","Text":"us snap into their center point."},{"Start":"11:04.889 ","End":"11:07.250","Text":"Then, I’ll draw the line across"},{"Start":"11:07.290 ","End":"11:09.209","Text":"to the other side, snapping it"},{"Start":"11:09.210 ","End":"11:10.800","Text":"into the other center-point."},{"Start":"11:11.970 ","End":"11:13.760","Text":"Now I’ll use the keyboard shortcut"},{"Start":"11:13.760 ","End":"11:16.050","Text":"letter “C” for Center Circle, and"},{"Start":"11:16.050 ","End":"11:17.979","Text":"we’ll have to turn off construction"},{"Start":"11:18.020 ","End":"11:20.240","Text":"in the dialog box, or by hitting"},{"Start":"11:20.240 ","End":"11:22.090","Text":"the keyboard shortcut letter “X.”"},{"Start":"11:22.990 ","End":"11:24.545","Text":"I’ll set its center point of the"},{"Start":"11:24.620 ","End":"11:26.710","Text":"circle at the center of the line,"},{"Start":"11:26.740 ","End":"11:28.150","Text":"where you’ll see the triangle"},{"Start":"11:28.180 ","End":"11:30.290","Text":"glyph appears, which represents"},{"Start":"11:30.320 ","End":"11:32.570","Text":"the midpoint or center of the line."},{"Start":"11:33.630 ","End":"11:35.929","Text":"Then, I’ll drag my mouse cursor out…"},{"Start":"11:36.429 ","End":"11:39.310","Text":"until it snaps into place tangent to"},{"Start":"11:39.310 ","End":"11:41.410","Text":"the circles that we created on the top"},{"Start":"11:41.420 ","End":"11:44.579","Text":"of the lego… and you know its tangent"},{"Start":"11:44.620 ","End":"11:46.590","Text":"if the tangent glyph appears, which"},{"Start":"11:46.590 ","End":"11:48.870","Text":"is the circle with a line next to it."},{"Start":"11:50.429 ","End":"11:52.430","Text":"I’ll go ahead and use the offset"},{"Start":"11:52.430 ","End":"11:54.250","Text":"feature by calling it with the keyboard"},{"Start":"11:54.250 ","End":"11:57.320","Text":"shortcut letter “O” OR by selecting"},{"Start":"11:57.320 ","End":"11:59.319","Text":"it from the sketch dropdown list."},{"Start":"12:00.369 ","End":"12:01.939","Text":"To offset the circle we’ll"},{"Start":"12:01.940 ","End":"12:03.610","Text":"select the outer circle."},{"Start":"12:04.430 ","End":"12:07.400","Text":"Then, I’ll type out 1mm for the offset"},{"Start":"12:07.400 ","End":"12:10.250","Text":"distance..and if the offset circle is"},{"Start":"12:10.250 ","End":"12:12.469","Text":"on the outside we can hit the “flip”"},{"Start":"12:12.480 ","End":"12:15.650","Text":"button to move it to the inside… and of"},{"Start":"12:15.650 ","End":"12:17.950","Text":"course, click okay to confirm the results."},{"Start":"12:17.950 ","End":"12:21.730","Text":"I’ll hit the keyboard shortcut letter"},{"Start":"12:21.780 ","End":"12:25.020","Text":"“E” for extrude… I’ll select the circle"},{"Start":"12:25.080 ","End":"12:28.449","Text":"and I’ll type out 8.1mm for the distance."},{"Start":"12:29.730 ","End":"12:32.350","Text":"After clicking okay in the dialog box"},{"Start":"12:32.469 ","End":"12:34.549","Text":"we’ll need to use the pattern feature,"},{"Start":"12:34.830 ","End":"12:37.080","Text":"just like we did to the top circles."},{"Start":"12:38.100 ","End":"12:39.890","Text":"I’ll select the rectangular pattern"},{"Start":"12:39.890 ","End":"12:42.120","Text":"feature from the create dropdown list."},{"Start":"12:43.510 ","End":"12:45.179","Text":"The pattern type should be set to"},{"Start":"12:45.179 ","End":"12:48.450","Text":"features, as we used that last, so all"},{"Start":"12:48.450 ","End":"12:50.520","Text":"we need to do is select the extrude that"},{"Start":"12:50.520 ","End":"12:52.899","Text":"we just created in the timeline below."},{"Start":"12:54.049 ","End":"12:56.319","Text":"Then, for the direction, I’ll select"},{"Start":"12:56.320 ","End":"12:59.599","Text":"the edge again… and I’ll type out 3"},{"Start":"12:59.610 ","End":"13:01.920","Text":"for the number of times to copy and"},{"Start":"13:01.930 ","End":"13:05.380","Text":"16mm for the distance...and click okay."},{"Start":"13:06.660 ","End":"13:10.240","Text":"Now if we revolve the lego around"},{"Start":"13:10.289 ","End":"13:11.760","Text":"you’ll see that we have completed"},{"Start":"13:11.760 ","End":"13:13.180","Text":"the overall lego brick shape."},{"Start":"13:14.070 ","End":"13:16.020","Text":"The last thing we’ll want to do is add"},{"Start":"13:16.020 ","End":"13:18.550","Text":"a fillet to some of the edges, making"},{"Start":"13:18.550 ","End":"13:20.030","Text":"sure that the edges aren’t sharp."},{"Start":"13:21.050 ","End":"13:23.000","Text":"The fillet command can be activated"},{"Start":"13:23.020 ","End":"13:25.890","Text":"from the Modify dropdown list or by"},{"Start":"13:25.940 ","End":"13:27.880","Text":"selecting the keyboard shortcut letter"},{"Start":"13:27.960 ","End":"13:31.320","Text":"“F.” We’ll simply select the lines we"},{"Start":"13:31.320 ","End":"13:36.560","Text":"want to fillet and add a fillet of 0.2mm"},{"Start":"13:36.609 ","End":"13:38.660","Text":"by typing that out in the dimension box."}],"ID":28984},{"Watched":false,"Name":"Day 2 - 3D Model a Beer Bottle","Duration":"20m 32s","ChapterTopicVideoID":27782,"CourseChapterTopicPlaylistID":275347,"HasSubtitles":true,"ThumbnailPath":null,"UploadDate":null,"DurationForVideoObject":null,"Description":null,"MetaTitle":null,"MetaDescription":null,"Canonical":null,"VideoComments":[],"Subtitles":[{"Start":"00:01.170 ","End":"00:02.080","Text":"Kevin Kennedy: Hey there, it’s"},{"Start":"00:02.080 ","End":"00:03.810","Text":"Kevin Kennedy, and welcome to"},{"Start":"00:03.810 ","End":"00:06.000","Text":"this revised version of Day #2"},{"Start":"00:06.600 ","End":"00:09.180","Text":"of Learn Fusion 360 in 30 days."},{"Start":"00:10.260 ","End":"00:12.479","Text":"By the end of this tutorial, you’ll"},{"Start":"00:12.480 ","End":"00:14.700","Text":"know how to 3D model a beer bottle."},{"Start":"00:15.400 ","End":"00:17.209","Text":"You’ll learn how to: insert a reference"},{"Start":"00:17.209 ","End":"00:19.330","Text":"image, create a fit-point-spline,"},{"Start":"00:20.300 ","End":"00:22.890","Text":"use the revolve feature, and"},{"Start":"00:22.940 ","End":"00:24.790","Text":"add the appearance of glass."},{"Start":"00:25.490 ","End":"00:27.410","Text":"To get started, if you’re following"},{"Start":"00:27.410 ","End":"00:29.989","Text":"along with the 30-day series then you"},{"Start":"00:29.990 ","End":"00:32.880","Text":"may want to create a new folder within"},{"Start":"00:32.880 ","End":"00:35.990","Text":"the Learn Fusion 360 in 30 days project."},{"Start":"00:37.340 ","End":"00:39.580","Text":"To create a new folder, click the"},{"Start":"00:39.580 ","End":"00:41.769","Text":"new folder button in the data panel."},{"Start":"00:43.540 ","End":"00:47.240","Text":"Then, label this folder “Day #2 - Beer"},{"Start":"00:47.240 ","End":"00:49.939","Text":"Bottle.” Simply type that out in the"},{"Start":"00:49.950 ","End":"00:52.769","Text":"input field and then hit the enter key on"},{"Start":"00:52.769 ","End":"00:55.290","Text":"your keyboard to confirm the name change."},{"Start":"00:56.360 ","End":"00:58.340","Text":"Creating folders is a nice way"},{"Start":"00:58.340 ","End":"01:00.000","Text":"to further organize your project"},{"Start":"01:00.000 ","End":"01:01.880","Text":"files within the data panel."},{"Start":"01:03.310 ","End":"01:04.589","Text":"You can also create a"},{"Start":"01:04.590 ","End":"01:07.350","Text":"folder for “Day #1 - Lego”."},{"Start":"01:10.709 ","End":"01:13.040","Text":"Then, select the corresponding lego"},{"Start":"01:13.040 ","End":"01:15.960","Text":"file with your mouse \u003e right click"},{"Start":"01:15.960 ","End":"01:18.370","Text":"on the file \u003e and then select “move”"},{"Start":"01:18.470 ","End":"01:20.539","Text":"from the list of available options."},{"Start":"01:21.660 ","End":"01:23.509","Text":"To move files around all you"},{"Start":"01:23.520 ","End":"01:25.090","Text":"have to do is select which"},{"Start":"01:25.099 ","End":"01:26.609","Text":"folder they should be moved to."},{"Start":"01:28.070 ","End":"01:30.399","Text":"Then, select that blue “Move”"},{"Start":"01:30.400 ","End":"01:32.320","Text":"button to confirm the change."},{"Start":"01:34.980 ","End":"01:37.410","Text":"Next, I’m going to hit the save icon in"},{"Start":"01:37.410 ","End":"01:39.229","Text":"the upper lefthand corner of the toolbar."},{"Start":"01:41.130 ","End":"01:43.099","Text":"This will open up the save dialog"},{"Start":"01:43.099 ","End":"01:44.739","Text":"box, in which I’ll type out"},{"Start":"01:44.770 ","End":"01:46.660","Text":"“Beer Bottle” for the file name."},{"Start":"01:48.289 ","End":"01:50.390","Text":"Before clicking the save button,"},{"Start":"01:50.560 ","End":"01:52.679","Text":"I’ll make sure the #2 folder is"},{"Start":"01:52.680 ","End":"01:54.980","Text":"selected for the location settings."},{"Start":"01:56.300 ","End":"01:58.670","Text":"If it\u0027s not selected, you can hit the"},{"Start":"01:58.670 ","End":"02:01.110","Text":"caret icon to toggle open all of your"},{"Start":"02:01.120 ","End":"02:03.660","Text":"folders...and then you can select the"},{"Start":"02:03.660 ","End":"02:06.810","Text":"corresponding #2 folder, which ensures"},{"Start":"02:06.830 ","End":"02:08.840","Text":"that the file will be placed there."},{"Start":"02:11.420 ","End":"02:13.090","Text":"We’re now ready to insert our"},{"Start":"02:13.090 ","End":"02:14.900","Text":"reference image, which we’ll use to"},{"Start":"02:14.900 ","End":"02:16.669","Text":"draw the shape of the beer bottle."},{"Start":"02:16.669 ","End":"02:16.824","Text":"To download the reference image for"},{"Start":"02:16.824 ","End":"02:17.005","Text":"this tutorial, head to my website at"},{"Start":"02:17.005 ","End":"02:17.031","Text":"ProductDesignOnline.com/3...that’s"},{"Start":"02:17.031 ","End":"02:17.134","Text":"ProductDesignOnline.com/3 and that URL"},{"Start":"02:17.134 ","End":"02:17.289","Text":"will automatically redirect to the page"},{"Start":"02:17.289 ","End":"02:17.444","Text":"with the resources for this tutorial."},{"Start":"02:17.469 ","End":"02:19.770","Text":"Before I insert the image, I’m going"},{"Start":"02:19.770 ","End":"02:21.880","Text":"to create a new component, which will"},{"Start":"02:21.880 ","End":"02:24.249","Text":"nest all of the images, bodies, and"},{"Start":"02:24.330 ","End":"02:27.260","Text":"other reference info in a nice component"},{"Start":"02:27.260 ","End":"02:30.070","Text":"folder within the Fusion 360 browser."},{"Start":"02:31.390 ","End":"02:33.089","Text":"To create a new component I’ll"},{"Start":"02:33.090 ","End":"02:35.130","Text":"select the assemble dropdown list."},{"Start":"02:36.139 ","End":"02:39.920","Text":"Then, I’ll select “new component.” This"},{"Start":"02:39.920 ","End":"02:42.480","Text":"opens up the new component dialog box,"},{"Start":"02:42.539 ","End":"02:44.770","Text":"where we can type out a component name."},{"Start":"02:46.120 ","End":"02:47.579","Text":"I’ll type out “Beer Bottle”"},{"Start":"02:47.590 ","End":"02:48.869","Text":"for the component name."},{"Start":"02:49.470 ","End":"02:51.640","Text":"Then, I’ll make sure \"empty component\""},{"Start":"02:51.690 ","End":"02:54.130","Text":"is selected, as we don’t currently"},{"Start":"02:54.130 ","End":"02:55.769","Text":"have anything in our design."},{"Start":"02:57.490 ","End":"03:00.169","Text":"Lastly, I’ll make sure the “activate” box"},{"Start":"03:00.170 ","End":"03:02.790","Text":"is checked, which activates our component"},{"Start":"03:02.860 ","End":"03:04.840","Text":"as soon as we click the “OK” button."},{"Start":"03:06.580 ","End":"03:07.990","Text":"After double-checking those"},{"Start":"03:07.990 ","End":"03:10.310","Text":"settings, I’ll click the “OK” button."},{"Start":"03:12.170 ","End":"03:14.239","Text":"At this point, we can enter the reference"},{"Start":"03:14.259 ","End":"03:16.510","Text":"image, which we’ll use as a guideline."},{"Start":"03:17.199 ","End":"03:18.140","Text":"We’re essentially going"},{"Start":"03:18.140 ","End":"03:19.770","Text":"to trace over the image."},{"Start":"03:21.000 ","End":"03:23.070","Text":"The beer bottle is a fairly simple"},{"Start":"03:23.070 ","End":"03:25.609","Text":"object, however, you’ll find"},{"Start":"03:25.610 ","End":"03:27.560","Text":"reference images to be a great way"},{"Start":"03:27.560 ","End":"03:30.609","Text":"to reverse engineer parts or designs"},{"Start":"03:31.040 ","End":"03:33.419","Text":"- especially with more complex objects."},{"Start":"03:35.299 ","End":"03:36.530","Text":"I’ll select the insert dropdown"},{"Start":"03:37.070 ","End":"03:39.000","Text":"list and then I’ll select"},{"Start":"03:39.020 ","End":"03:40.830","Text":"the “Attached Canvas” option."},{"Start":"03:42.400 ","End":"03:43.940","Text":"This opens up the “Attached"},{"Start":"03:43.940 ","End":"03:45.469","Text":"Canvas” dialog box."},{"Start":"03:47.240 ","End":"03:49.170","Text":"You’ll see that the first option we"},{"Start":"03:49.170 ","End":"03:51.490","Text":"need to define is the “face” that our"},{"Start":"03:51.490 ","End":"03:53.260","Text":"reference image will be placed on."},{"Start":"03:54.579 ","End":"03:56.920","Text":"If we had other parts in our model then we"},{"Start":"03:56.920 ","End":"04:00.019","Text":"could select a face of the model; however,"},{"Start":"04:00.310 ","End":"04:02.630","Text":"we don’t have anything yet, so we’ll"},{"Start":"04:02.630 ","End":"04:05.140","Text":"need to select one of the origin planes."},{"Start":"04:06.770 ","End":"04:09.719","Text":"I’m going to select the XZ origin plane."},{"Start":"04:10.529 ","End":"04:12.310","Text":"Then, I’ll click on the “select"},{"Start":"04:12.320 ","End":"04:14.500","Text":"image” icon, which opens up the"},{"Start":"04:14.510 ","End":"04:16.599","Text":"file folders on your local machine."},{"Start":"04:17.720 ","End":"04:19.880","Text":"From here, I’ll select the image"},{"Start":"04:19.880 ","End":"04:21.649","Text":"from my downloads folder and"},{"Start":"04:21.649 ","End":"04:23.680","Text":"I’ll click the blue open button."},{"Start":"04:25.200 ","End":"04:26.590","Text":"You’ll notice the image is"},{"Start":"04:26.599 ","End":"04:28.890","Text":"fairly small upon attaching it."},{"Start":"04:29.389 ","End":"04:32.000","Text":"To resize the image I’ll just click"},{"Start":"04:32.000 ","End":"04:34.150","Text":"and hold the corner manipulator or the"},{"Start":"04:34.160 ","End":"04:36.650","Text":"scaling icon, and I’m going to drag"},{"Start":"04:36.690 ","End":"04:39.080","Text":"away from the image to make it larger."},{"Start":"04:41.590 ","End":"04:43.449","Text":"However, you’ll realize that"},{"Start":"04:43.460 ","End":"04:45.890","Text":"this method is not very accurate."},{"Start":"04:46.340 ","End":"04:48.479","Text":"We’d rather have the exact dimensions"},{"Start":"04:48.570 ","End":"04:50.730","Text":"of the image...so I’ll show you how to"},{"Start":"04:50.730 ","End":"04:53.100","Text":"calibrate the image in just a minute."},{"Start":"04:54.950 ","End":"04:57.120","Text":"First, I just want to point out that"},{"Start":"04:57.160 ","End":"04:59.570","Text":"after we selected the image from the file"},{"Start":"04:59.580 ","End":"05:02.109","Text":"folder, you may or may not have noticed"},{"Start":"05:02.139 ","End":"05:04.290","Text":"that we have a number of additional"},{"Start":"05:04.290 ","End":"05:07.050","Text":"options in the “Attached Canvas” dialog."},{"Start":"05:08.350 ","End":"05:10.650","Text":"We can now flip the image if needed…"},{"Start":"05:11.200 ","End":"05:14.370","Text":"scale the image… change the opacity…"},{"Start":"05:15.349 ","End":"05:17.159","Text":"along with a few other options."},{"Start":"05:18.929 ","End":"05:21.480","Text":"For now, I’ll simply click the “OK” button"},{"Start":"05:21.509 ","End":"05:23.890","Text":"so we can calibrate the size of the image."},{"Start":"05:24.900 ","End":"05:26.350","Text":"To calibrate the image we’ll"},{"Start":"05:26.350 ","End":"05:27.480","Text":"have to right-click on the"},{"Start":"05:27.480 ","End":"05:29.390","Text":"file in the canvases folder."},{"Start":"05:30.340 ","End":"05:32.330","Text":"As I mentioned at the beginning of"},{"Start":"05:32.330 ","End":"05:34.700","Text":"this video, the component we created"},{"Start":"05:34.740 ","End":"05:37.019","Text":"will group all of its relevant parts."},{"Start":"05:37.980 ","End":"05:40.079","Text":"Therefore, we’ll have to toggle open"},{"Start":"05:40.080 ","End":"05:44.030","Text":"the “Beer Bottle” component… then we can"},{"Start":"05:44.030 ","End":"05:46.610","Text":"toggle open the “Canvases” folder...and"},{"Start":"05:46.610 ","End":"05:48.670","Text":"then you’ll see the image we attached."},{"Start":"05:49.780 ","End":"05:51.830","Text":"We can no right-click on the image"},{"Start":"05:51.870 ","End":"05:54.140","Text":"to select the calibrate option."},{"Start":"05:56.540 ","End":"05:58.229","Text":"The calibrate option lets us"},{"Start":"05:58.230 ","End":"06:00.440","Text":"define two points on the image,"},{"Start":"06:00.480 ","End":"06:01.940","Text":"and then we can define the"},{"Start":"06:01.950 ","End":"06:03.930","Text":"distance between the two points."},{"Start":"06:05.290 ","End":"06:07.370","Text":"First, I’m going to hit the “Front” side"},{"Start":"06:07.380 ","End":"06:23.320","Text":"of the viewcube in the upper right-hand"},{"Start":"06:23.320 ","End":"06:24.101","Text":"corner to look directly at the image."},{"Start":"06:24.101 ","End":"06:24.583","Text":"Then, for the first point, I’ll click in"},{"Start":"06:24.583 ","End":"06:25.005","Text":"the lower right-hand corner of the image."},{"Start":"06:25.005 ","End":"06:25.488","Text":"For the second point, I’ll click in the"},{"Start":"06:25.488 ","End":"06:25.849","Text":"upper right-hand corner of the image."},{"Start":"06:25.910 ","End":"06:27.610","Text":"You’ll notice immediately after"},{"Start":"06:27.610 ","End":"06:29.630","Text":"placing the second point that the"},{"Start":"06:29.639 ","End":"06:31.840","Text":"dimension input field opened up."},{"Start":"06:32.839 ","End":"06:34.229","Text":"Within the input field,"},{"Start":"06:34.270 ","End":"06:35.149","Text":"I’ll type out 240mm."},{"Start":"06:38.230 ","End":"06:40.300","Text":"After typing out the dimension I’ll hit"},{"Start":"06:40.300 ","End":"06:44.030","Text":"the enter key on my keyboard...and this"},{"Start":"06:44.070 ","End":"06:46.230","Text":"time you’ll notice immediately after"},{"Start":"06:46.230 ","End":"06:48.530","Text":"hitting the enter key that the image"},{"Start":"06:48.530 ","End":"06:50.870","Text":"was scaled to the appropriate size."},{"Start":"06:52.230 ","End":"06:54.310","Text":"We’ll now be able to trace the image,"},{"Start":"06:54.340 ","End":"06:57.190","Text":"creating our model at a 1 to 1 scale."},{"Start":"06:59.230 ","End":"07:00.990","Text":"To start off the beer bottle"},{"Start":"07:01.060 ","End":"07:02.510","Text":"I’m going to draw a line down"},{"Start":"07:02.510 ","End":"07:04.050","Text":"the middle of the beer bottle."},{"Start":"07:05.130 ","End":"07:07.000","Text":"I’m only going to draw half of the"},{"Start":"07:07.000 ","End":"07:08.550","Text":"image as I’ll show you how to use"},{"Start":"07:08.550 ","End":"07:10.360","Text":"the “Revolve” command to create"},{"Start":"07:10.389 ","End":"07:12.420","Text":"the entire 3-dimensional shape."},{"Start":"07:14.480 ","End":"07:16.315","Text":"I’ll activate the line command with the"},{"Start":"07:16.330 ","End":"07:18.870","Text":"keyboard shortcut letter “L,” as in Lima."},{"Start":"07:19.870 ","End":"07:22.309","Text":"Then, I’m going to click on the XZ"},{"Start":"07:22.330 ","End":"07:24.860","Text":"origin plane as the plane to sketch on."},{"Start":"07:25.990 ","End":"07:28.120","Text":"I’ll click at the middle of the top of"},{"Start":"07:28.120 ","End":"07:30.209","Text":"the bottle for the first point of the"},{"Start":"07:30.210 ","End":"07:33.860","Text":"line...and I’ll click at the bottom"},{"Start":"07:33.860 ","End":"07:35.640","Text":"of the bottle for the second point."},{"Start":"07:38.010 ","End":"07:40.260","Text":"With the line command still active we’ll"},{"Start":"07:40.260 ","End":"07:42.209","Text":"want to create the bottom of the bottle."},{"Start":"07:43.219 ","End":"07:45.459","Text":"Now the reference image I have used"},{"Start":"07:45.459 ","End":"07:47.739","Text":"is at a slight perspective because"},{"Start":"07:47.750 ","End":"07:49.335","Text":"the top and bottom of the beer"},{"Start":"07:49.335 ","End":"07:51.540","Text":"bottle are not completely flat."},{"Start":"07:52.400 ","End":"07:54.930","Text":"To ensure that my bottle is flat,"},{"Start":"07:55.040 ","End":"07:56.650","Text":"I’ll continue drawing lines by"},{"Start":"07:56.650 ","End":"07:58.870","Text":"drawing a line straight to the right."},{"Start":"08:00.400 ","End":"08:02.600","Text":"I’m going to type out 30mm"},{"Start":"08:02.610 ","End":"08:03.949","Text":"for the length of the line."},{"Start":"08:04.809 ","End":"08:07.010","Text":"Then, I’m going to hit the tab key"},{"Start":"08:07.130 ","End":"08:09.100","Text":"which locks the dimension in place."},{"Start":"08:10.350 ","End":"08:12.270","Text":"Locking the dimension ensures that"},{"Start":"08:12.270 ","End":"08:14.960","Text":"we don’t accidentally change it as"},{"Start":"08:14.960 ","End":"08:17.040","Text":"we move around our mouse cursor."},{"Start":"08:18.380 ","End":"08:20.719","Text":"At this point, I can click to set"},{"Start":"08:20.719 ","End":"08:23.050","Text":"the line, where it snaps in at 90"},{"Start":"08:23.050 ","End":"08:25.360","Text":"degrees creating a horizontal line."},{"Start":"08:26.720 ","End":"08:28.890","Text":"With the line command still active, I’ll"},{"Start":"08:28.890 ","End":"08:30.880","Text":"draw a line heading towards the top."},{"Start":"08:31.940 ","End":"08:35.720","Text":"I’ll make this line 134mm, and"},{"Start":"08:35.730 ","End":"08:37.919","Text":"then I’ll click to place the line."},{"Start":"08:39.509 ","End":"08:41.630","Text":"Then, I’m going to hit the escape key"},{"Start":"08:41.669 ","End":"08:43.930","Text":"on my keyboard to clear all commands."},{"Start":"08:45.690 ","End":"08:46.890","Text":"I’ll now want to use the"},{"Start":"08:47.030 ","End":"08:48.979","Text":"fit-point-spline tool to create the"},{"Start":"08:48.980 ","End":"08:50.880","Text":"curvature of the stem of the bottle."},{"Start":"08:51.550 ","End":"08:54.059","Text":"Before using the spline tool, I’m going"},{"Start":"08:54.059 ","End":"08:56.050","Text":"to create some sketch points which will"},{"Start":"08:56.050 ","End":"08:58.220","Text":"make the spline tool easier to use."},{"Start":"08:59.309 ","End":"09:01.530","Text":"I’ll select the sketch dropdown list."},{"Start":"09:02.080 ","End":"09:04.260","Text":"Then, I’m going to select the “Point”"},{"Start":"09:04.260 ","End":"09:06.460","Text":"command near the middle of the list."},{"Start":"09:08.059 ","End":"09:10.140","Text":"The point command simply lets us place"},{"Start":"09:10.150 ","End":"09:12.620","Text":"sketch points every time we click with"},{"Start":"09:12.620 ","End":"09:15.700","Text":"our mouse...and these sketch points"},{"Start":"09:15.730 ","End":"09:18.170","Text":"can be used as reference points when we"},{"Start":"09:18.180 ","End":"09:20.890","Text":"create other types of sketch geometry."},{"Start":"09:23.010 ","End":"09:24.790","Text":"I’m going to zoom in on the stem"},{"Start":"09:24.790 ","End":"09:26.560","Text":"of the bottle by using the center"},{"Start":"09:26.560 ","End":"09:28.870","Text":"scroll wheel on my mouse...so it’s"},{"Start":"09:28.870 ","End":"09:30.510","Text":"easier to work with the image."},{"Start":"09:31.599 ","End":"09:33.819","Text":"Then, I’ll simply click to place a"},{"Start":"09:33.820 ","End":"09:35.980","Text":"number of sketch points at all of the"},{"Start":"09:35.980 ","End":"09:39.960","Text":"points where I feel the curvature starts"},{"Start":"09:40.060 ","End":"09:43.530","Text":"to change… ensuring that the points"},{"Start":"09:43.600 ","End":"09:46.080","Text":"are spaced out as evenly as possible."},{"Start":"09:46.140 ","End":"10:03.210","Text":"Once all the sketch points are"},{"Start":"10:03.210 ","End":"10:05.000","Text":"in place, I’m going to activate"},{"Start":"10:05.010 ","End":"10:06.670","Text":"the “Fit Point Spline” tool."},{"Start":"10:07.240 ","End":"10:09.699","Text":"I’ll select the sketch dropdown list and"},{"Start":"10:09.700 ","End":"10:12.139","Text":"then I’ll find the spline flyout folder."},{"Start":"10:12.869 ","End":"10:14.709","Text":"You’ll see there’s a folder since there"},{"Start":"10:14.710 ","End":"10:16.569","Text":"are two different types of splines."},{"Start":"10:16.569 ","End":"10:18.920","Text":"I’ll select the “Fit Point Spline”"},{"Start":"10:18.920 ","End":"10:21.700","Text":"option from the list, which activates it."},{"Start":"10:22.860 ","End":"10:25.089","Text":"Then, to draw the spline I’m going"},{"Start":"10:25.090 ","End":"10:27.029","Text":"to click on the bottom sketch point"},{"Start":"10:27.400 ","End":"10:29.500","Text":"and I’ll make my way towards the top"},{"Start":"10:29.830 ","End":"10:32.220","Text":"clicking each sketch point one by one…."},{"Start":"10:39.849 ","End":"10:42.490","Text":"Once all of the sketch points are selected"},{"Start":"10:42.780 ","End":"10:44.740","Text":"you can either hit the enter key on"},{"Start":"10:44.740 ","End":"10:47.119","Text":"your keyboard, or you can select the"},{"Start":"10:47.119 ","End":"10:50.069","Text":"checkmark icon that turns green as you"},{"Start":"10:50.070 ","End":"10:52.190","Text":"hover over it with your mouse cursor."},{"Start":"10:53.240 ","End":"10:54.830","Text":"It’s important to note that you"},{"Start":"10:54.830 ","End":"10:57.639","Text":"cannot hit the escape key right after"},{"Start":"10:57.639 ","End":"10:59.720","Text":"creating your last spline point."},{"Start":"11:00.770 ","End":"11:02.680","Text":"Although the escape key exits"},{"Start":"11:02.690 ","End":"11:04.610","Text":"most commands after sketching out"},{"Start":"11:04.619 ","End":"11:07.760","Text":"geometry...with the spline tool it will"},{"Start":"11:07.760 ","End":"11:10.200","Text":"not only exit the command but it will"},{"Start":"11:10.210 ","End":"11:13.020","Text":"also delete the recent spline geometry."},{"Start":"11:14.349 ","End":"11:15.619","Text":"This is something that I see"},{"Start":"11:15.620 ","End":"11:17.600","Text":"beginners getting confused with all"},{"Start":"11:17.600 ","End":"11:19.870","Text":"the time...so just be aware of this"},{"Start":"11:19.910 ","End":"11:23.959","Text":"as you work with Fusion 360 splines."},{"Start":"11:23.959 ","End":"11:26.400","Text":"After hitting enter or the checkmark"},{"Start":"11:26.450 ","End":"11:28.230","Text":"we can then hit the escape key"},{"Start":"11:28.480 ","End":"11:29.829","Text":"to make sure we don’t have the"},{"Start":"11:29.830 ","End":"11:31.680","Text":"spline command still active."},{"Start":"11:32.760 ","End":"11:34.590","Text":"This will let us further define the beer"},{"Start":"11:34.590 ","End":"11:36.990","Text":"bottles shape by dragging around the green"},{"Start":"11:37.000 ","End":"11:39.790","Text":"manipulator handles of each spline point."},{"Start":"11:41.289 ","End":"11:43.390","Text":"Really quick, I just want to point out"},{"Start":"11:43.410 ","End":"11:45.970","Text":"that to create Fit Point Splines you"},{"Start":"11:45.970 ","End":"11:48.200","Text":"don’t have to first create sketch points."},{"Start":"11:49.230 ","End":"11:51.870","Text":"You can simply click to place each"},{"Start":"11:51.870 ","End":"11:54.320","Text":"point of the spline… however, I"},{"Start":"11:54.320 ","End":"11:56.059","Text":"find that sketch points make it"},{"Start":"11:56.090 ","End":"11:57.780","Text":"easier to create Fit Point Splines."},{"Start":"11:59.889 ","End":"12:01.373","Text":"I’m just going to look at the spline"},{"Start":"12:01.610 ","End":"12:03.780","Text":"and how it follows the reference image."},{"Start":"12:04.420 ","End":"12:06.930","Text":"If I see any of the areas to be off"},{"Start":"12:06.970 ","End":"12:09.330","Text":"quite a bit, then I’ll simply click"},{"Start":"12:09.330 ","End":"12:11.150","Text":"on the green spline handle points"},{"Start":"12:11.240 ","End":"12:13.080","Text":"and I’ll drag them around until"},{"Start":"12:13.080 ","End":"12:14.829","Text":"I’m happy with the overall shape."},{"Start":"12:17.680 ","End":"12:19.960","Text":"To get the spline handles of one point"},{"Start":"12:19.970 ","End":"12:22.000","Text":"to appear you can simply click on"},{"Start":"12:22.000 ","End":"12:24.710","Text":"that one point… and to get the spline"},{"Start":"12:24.720 ","End":"12:27.320","Text":"handles of all spline points to appear"},{"Start":"12:27.540 ","End":"12:29.200","Text":"you can click on the entire spline."},{"Start":"12:29.330 ","End":"12:46.100","Text":"You can also click and drag spline"},{"Start":"12:46.110 ","End":"12:48.730","Text":"points to move them around… I’m"},{"Start":"12:48.730 ","End":"12:50.530","Text":"going to double-check that the top"},{"Start":"12:50.900 ","End":"12:52.610","Text":"spline point lines up with the top"},{"Start":"12:52.650 ","End":"12:54.389","Text":"of the first line that we drew."},{"Start":"12:56.510 ","End":"12:58.400","Text":"If it doesn’t, then I’ll simply click on"},{"Start":"12:58.560 ","End":"13:00.720","Text":"the point and I’ll drag it around until"},{"Start":"13:00.720 ","End":"13:02.830","Text":"they’re snapped to the same grid line."},{"Start":"13:05.800 ","End":"13:07.349","Text":"Next, I’ll select the line"},{"Start":"13:07.370 ","End":"13:08.610","Text":"command in the toolbar."},{"Start":"13:09.929 ","End":"13:11.430","Text":"I’m going to click to connect the"},{"Start":"13:11.430 ","End":"13:14.340","Text":"endpoint of the left line and I’ll click"},{"Start":"13:14.370 ","End":"13:18.380","Text":"again on the endpoint of the spline."},{"Start":"13:18.380 ","End":"13:20.520","Text":"After connecting the two endpoints,"},{"Start":"13:20.650 ","End":"13:22.359","Text":"you’ll notice our shape has become"},{"Start":"13:22.389 ","End":"13:25.310","Text":"a closed profile, which is signified"},{"Start":"13:25.330 ","End":"13:27.339","Text":"by this orange background highlight."},{"Start":"13:28.830 ","End":"13:31.230","Text":"This means we can use the profile shape"},{"Start":"13:31.290 ","End":"13:34.329","Text":"with the revolve command, as it’s required"},{"Start":"13:34.329 ","End":"13:36.990","Text":"that you have at least one closed profile."},{"Start":"13:39.160 ","End":"13:40.870","Text":"I’m going to select the create"},{"Start":"13:40.940 ","End":"13:42.800","Text":"dropdown list and then I’ll select"},{"Start":"13:43.059 ","End":"13:44.980","Text":"the “Revolve” command from the list."},{"Start":"13:47.480 ","End":"13:49.229","Text":"Then, you’ll see that because we"},{"Start":"13:49.240 ","End":"13:52.260","Text":"have only one profile Fusion 360"},{"Start":"13:52.260 ","End":"13:53.800","Text":"will automatically select it."},{"Start":"13:54.300 ","End":"13:56.839","Text":"If your profile isn’t selected then"},{"Start":"13:56.840 ","End":"13:59.070","Text":"be sure to click on it to select it."},{"Start":"14:00.400 ","End":"14:03.670","Text":"Next, we’ll have to select a revolve axis."},{"Start":"14:04.359 ","End":"14:05.934","Text":"I’ll select the axis selector"},{"Start":"14:06.299 ","End":"14:08.510","Text":"in the dialog box and then"},{"Start":"14:08.510 ","End":"14:10.320","Text":"I’m going to select the inside"},{"Start":"14:10.320 ","End":"14:12.430","Text":"straight line of the beer bottle."},{"Start":"14:13.770 ","End":"14:15.699","Text":"You’ll see that we get a nice preview"},{"Start":"14:15.730 ","End":"14:17.510","Text":"of the 3-dimensional shape that is"},{"Start":"14:17.510 ","End":"14:19.969","Text":"being created by revolving the closed"},{"Start":"14:19.980 ","End":"14:23.189","Text":"profile shape around the selected axis."},{"Start":"14:24.570 ","End":"14:26.850","Text":"Additionally, you’ll see that"},{"Start":"14:26.860 ","End":"14:29.110","Text":"in some scenarios you may need"},{"Start":"14:29.120 ","End":"14:32.300","Text":"a revolve that isn’t 360 degrees"},{"Start":"14:32.639 ","End":"14:34.779","Text":"or a fully symmetrical shape."},{"Start":"14:36.030 ","End":"14:38.349","Text":"If that is the case then you can update"},{"Start":"14:38.360 ","End":"14:40.810","Text":"the degree field in the dialog box."},{"Start":"14:42.230 ","End":"14:44.130","Text":"For the beer bottle, we’ll simply"},{"Start":"14:44.130 ","End":"14:46.990","Text":"leave this at 360 degrees and"},{"Start":"14:46.990 ","End":"14:48.840","Text":"then I’ll click the “OK” button."},{"Start":"14:50.110 ","End":"14:51.840","Text":"Now that we’ve created the overall"},{"Start":"14:51.840 ","End":"14:53.470","Text":"beer bottle shape, we’ll need to"},{"Start":"14:53.480 ","End":"14:55.830","Text":"finish it off by making it hollow and"},{"Start":"14:55.830 ","End":"14:58.039","Text":"by rounding over some of its edges."},{"Start":"14:59.129 ","End":"15:00.790","Text":"I’m going to first hit the keyboard"},{"Start":"15:00.790 ","End":"15:03.160","Text":"shortcut letter “F,” as in Foxtrot,"},{"Start":"15:03.210 ","End":"15:05.110","Text":"to activate the fillet command."},{"Start":"15:06.080 ","End":"15:08.189","Text":"We’ll use the fillet command to add a"},{"Start":"15:08.190 ","End":"15:10.600","Text":"rounded edge to the bottom of this bottle."},{"Start":"15:11.550 ","End":"15:13.590","Text":"I’ll select the bottom edge and then"},{"Start":"15:13.590 ","End":"15:16.590","Text":"I’ll type out 5mm for the fillet radius."},{"Start":"15:18.010 ","End":"15:20.460","Text":"Then, before clicking the “OK” button,"},{"Start":"15:20.710 ","End":"15:22.069","Text":"I’m going to add one more fillet"},{"Start":"15:22.440 ","End":"15:24.430","Text":"to the top lip of the beer bottle."},{"Start":"15:25.750 ","End":"15:27.630","Text":"I’ll click the “Add new selection”"},{"Start":"15:27.719 ","End":"15:30.190","Text":"plus symbol, which allows us to create"},{"Start":"15:30.200 ","End":"15:32.560","Text":"multiple fillets with different radii,"},{"Start":"15:33.570 ","End":"15:35.540","Text":"all within the same fillet command."},{"Start":"15:36.799 ","End":"15:38.360","Text":"Then, I’m going to select the top"},{"Start":"15:38.390 ","End":"15:40.140","Text":"edge of the beer bottle, and I’ll"},{"Start":"15:40.180 ","End":"15:43.160","Text":"enter a fillet of just 1mm, as I"},{"Start":"15:43.180 ","End":"15:45.310","Text":"don’t want this to have a sharp edge."},{"Start":"15:46.450 ","End":"15:49.060","Text":"Finally, I’ll click the “OK” button in the"},{"Start":"15:49.060 ","End":"15:51.829","Text":"fillet dialog box to confirm the results."},{"Start":"15:54.230 ","End":"15:55.740","Text":"To ensure the opening of the"},{"Start":"15:55.740 ","End":"15:57.950","Text":"bottle is a set width, I’m going"},{"Start":"15:58.080 ","End":"15:59.860","Text":"double-click on the sketch in"},{"Start":"15:59.860 ","End":"16:02.160","Text":"the timeline, to open it back up."},{"Start":"16:03.559 ","End":"16:05.520","Text":"Then, I’m going to hit the keyboard"},{"Start":"16:05.520 ","End":"16:08.359","Text":"shortcut letter “D,” as in Delta, to"},{"Start":"16:08.370 ","End":"16:10.660","Text":"activate the sketch dimension tool."},{"Start":"16:11.900 ","End":"16:14.079","Text":"I’ll select the top line and"},{"Start":"16:14.080 ","End":"16:16.790","Text":"I’ll add a dimension of 9mm."},{"Start":"16:18.280 ","End":"16:20.040","Text":"Then, I’m going to right-click"},{"Start":"16:20.040 ","End":"16:21.610","Text":"on the line and I’ll select"},{"Start":"16:21.620 ","End":"16:24.230","Text":"Horizontal/Vertical constraint."},{"Start":"16:25.530 ","End":"16:27.189","Text":"This constraint will ensure"},{"Start":"16:27.190 ","End":"16:29.360","Text":"that the line stays horizontal."},{"Start":"16:30.530 ","End":"16:32.170","Text":"Don’t worry, I’ll be covering"},{"Start":"16:32.170 ","End":"16:34.590","Text":"the topic of constraints further"},{"Start":"16:34.590 ","End":"16:36.870","Text":"in-depth later in this course."},{"Start":"16:39.179 ","End":"16:41.119","Text":"Once that is complete I’ll hit"},{"Start":"16:41.120 ","End":"16:43.710","Text":"the “stop sketch” button so"},{"Start":"16:43.710 ","End":"16:46.240","Text":"we can make the bottle hollow."},{"Start":"16:48.160 ","End":"16:49.949","Text":"To make the bottle hollow I’ll"},{"Start":"16:49.950 ","End":"16:51.320","Text":"activate the shell command"},{"Start":"16:51.340 ","End":"16:53.190","Text":"from the modify dropdown list…"},{"Start":"16:54.940 ","End":"16:57.180","Text":"Then, I’m going to select the body"},{"Start":"16:57.180 ","End":"16:58.830","Text":"of the bottle by selecting the"},{"Start":"16:58.830 ","End":"17:01.260","Text":"body in the Fusion 360 browser."},{"Start":"17:04.699 ","End":"17:07.319","Text":"I’ll type out 3mm for the thickness"},{"Start":"17:07.329 ","End":"17:09.170","Text":"of the shell command, which is"},{"Start":"17:09.190 ","End":"17:11.030","Text":"equal to the thickness we want the"},{"Start":"17:11.030 ","End":"17:13.810","Text":"glass to be… and I’ll click the “OK”"},{"Start":"17:13.810 ","End":"17:16.129","Text":"button to confirm the shell results."},{"Start":"17:17.509 ","End":"17:19.480","Text":"At this point, we can’t tell if"},{"Start":"17:19.480 ","End":"17:21.660","Text":"it’s hollow or not, as the top of"},{"Start":"17:21.660 ","End":"17:23.790","Text":"our bottle is still sealed off."},{"Start":"17:24.660 ","End":"17:27.260","Text":"To look at the inside, we can"},{"Start":"17:27.270 ","End":"17:29.700","Text":"use the section analysis tool."},{"Start":"17:31.360 ","End":"17:33.169","Text":"I’ll select the inspect dropdown"},{"Start":"17:33.179 ","End":"17:35.179","Text":"menu...and then I’ll select"},{"Start":"17:35.210 ","End":"17:37.140","Text":"the section analysis tool."},{"Start":"17:37.990 ","End":"17:41.069","Text":"Next, I’m going to click on the XZ origin"},{"Start":"17:41.070 ","End":"17:43.810","Text":"plane as the plane to view the model from."},{"Start":"17:44.960 ","End":"17:46.630","Text":"You’ll see this cuts our model in"},{"Start":"17:46.640 ","End":"17:49.820","Text":"half, but only for the sake of viewing."},{"Start":"17:50.580 ","End":"17:53.810","Text":"Our full model is still there and"},{"Start":"17:53.810 ","End":"17:56.000","Text":"we can turn this off at any time by"},{"Start":"17:56.000 ","End":"17:58.350","Text":"clicking the section analysis lightbulb."},{"Start":"18:00.740 ","End":"18:02.500","Text":"I’ll now hit the keyboard shortcut"},{"Start":"18:02.520 ","End":"18:04.630","Text":"letter “C,” as in Charlie, to"},{"Start":"18:04.630 ","End":"18:06.780","Text":"activate the center-circle command."},{"Start":"18:08.110 ","End":"18:09.759","Text":"Then, I’m going to select"},{"Start":"18:09.760 ","End":"18:11.290","Text":"the top face of the bottle."},{"Start":"18:12.670 ","End":"18:14.619","Text":"We’re going to cut out a circle"},{"Start":"18:14.630 ","End":"18:16.369","Text":"so the bottle has an opening."},{"Start":"18:17.430 ","End":"18:24.730","Text":"I’ll type out 14mm for the"},{"Start":"18:24.740 ","End":"18:31.240","Text":"diameter and then I’ll hit the"},{"Start":"18:31.240 ","End":"18:32.519","Text":"extrude icon in the toolbar."},{"Start":"18:33.129 ","End":"18:37.060","Text":"In the extrude dialog box, I’ll"},{"Start":"18:37.070 ","End":"18:38.940","Text":"change the operation to “cut”."},{"Start":"18:40.090 ","End":"18:42.350","Text":"We’ll then want to set the extrude to"},{"Start":"18:42.410 ","End":"18:45.139","Text":"cut to the other side of this top face."},{"Start":"18:46.410 ","End":"18:48.034","Text":"I’ll change the extent to the"},{"Start":"18:48.099 ","End":"18:50.620","Text":"“to object” selection...and then"},{"Start":"18:50.620 ","End":"18:52.359","Text":"I’ll select the bottom face."},{"Start":"18:54.570 ","End":"18:56.340","Text":"Finally, I’ll click “OK”"},{"Start":"18:56.870 ","End":"18:58.260","Text":"to confirm the results."},{"Start":"19:00.140 ","End":"19:01.150","Text":"Now that we have our hole"},{"Start":"19:01.160 ","End":"19:03.260","Text":"cutout, we’ll need to add another"},{"Start":"19:03.260 ","End":"19:04.940","Text":"fillet to this inner edge."},{"Start":"19:05.849 ","End":"19:07.715","Text":"I’m going to activate the model fillet"},{"Start":"19:07.910 ","End":"19:10.200","Text":"command from the Modify dropdown list."},{"Start":"19:12.049 ","End":"19:13.920","Text":"I’ll select the inner edge and"},{"Start":"19:13.920 ","End":"19:16.680","Text":"I’ll add a fillet radius of 2mm,"},{"Start":"19:16.710 ","End":"19:18.650","Text":"before clicking the “OK” button."},{"Start":"19:20.020 ","End":"19:22.630","Text":"Then, I’ll be sure to turn off the section"},{"Start":"19:22.630 ","End":"19:25.240","Text":"analysis by selecting its corresponding"},{"Start":"19:25.240 ","End":"19:27.700","Text":"light bulb in the Fusion 360 browser."},{"Start":"19:29.660 ","End":"19:31.680","Text":"To finish off the model let\u0027s"},{"Start":"19:31.680 ","End":"19:33.480","Text":"add the appearance of glass."},{"Start":"19:34.600 ","End":"19:36.250","Text":"First, I’m going to select the"},{"Start":"19:36.250 ","End":"19:37.825","Text":"lightbulb next to the canvases"},{"Start":"19:38.190 ","End":"19:40.490","Text":"folder, which turns off the reference"},{"Start":"19:40.520 ","End":"19:42.510","Text":"image, as we no longer need it."},{"Start":"19:43.460 ","End":"19:45.250","Text":"Then, I’m going to right-click"},{"Start":"19:45.280 ","End":"19:47.379","Text":"anywhere in the canvas window, and"},{"Start":"19:47.379 ","End":"19:49.409","Text":"I’ll select the appearance option."},{"Start":"19:50.070 ","End":"19:51.629","Text":"This opens up the appearance"},{"Start":"19:51.630 ","End":"19:53.450","Text":"dialog box, which hosts a"},{"Start":"19:53.450 ","End":"19:55.950","Text":"number of premade appearances."},{"Start":"19:56.880 ","End":"19:58.219","Text":"They can then be dragged and"},{"Start":"19:58.219 ","End":"19:59.959","Text":"dropped onto the model to"},{"Start":"19:59.960 ","End":"20:01.750","Text":"make them look more realistic."},{"Start":"20:02.750 ","End":"20:03.950","Text":"I’m going to search for"},{"Start":"20:03.960 ","End":"20:05.560","Text":"glass in the search field."},{"Start":"20:06.340 ","End":"20:08.510","Text":"Then, I’ll scroll down until I see"},{"Start":"20:08.510 ","End":"20:10.730","Text":"the “Glass [Bronze]” appearance."},{"Start":"20:12.570 ","End":"20:14.040","Text":"You’ll have to hit the download"},{"Start":"20:14.040 ","End":"20:15.980","Text":"button to the right of the appearance,"},{"Start":"20:16.020 ","End":"20:17.440","Text":"to download the appearance if"},{"Start":"20:17.440 ","End":"20:19.170","Text":"you haven\u0027t already done so."},{"Start":"20:20.990 ","End":"20:22.979","Text":"Then, I’m going to simply drag and"},{"Start":"20:22.980 ","End":"20:24.790","Text":"drop the appearance onto the body"},{"Start":"20:24.790 ","End":"20:26.760","Text":"of the bottle...and you’ll see that"},{"Start":"20:26.760 ","End":"20:29.160","Text":"the glass appearance is now applied."}],"ID":28985},{"Watched":false,"Name":"Day 3 - 3D Model a Paper Clip","Duration":"13m 59s","ChapterTopicVideoID":27783,"CourseChapterTopicPlaylistID":275347,"HasSubtitles":true,"ThumbnailPath":null,"UploadDate":null,"DurationForVideoObject":null,"Description":null,"MetaTitle":null,"MetaDescription":null,"Canonical":null,"VideoComments":[],"Subtitles":[{"Start":"00:00.110 ","End":"00:00.970","Text":"Kevin Kennedy: Hey there, it’s"},{"Start":"00:00.970 ","End":"00:02.590","Text":"Kevin Kennedy, and welcome to"},{"Start":"00:02.590 ","End":"00:05.170","Text":"this revised version of Day #3"},{"Start":"00:05.210 ","End":"00:08.020","Text":"of Learn Fusion 360 in 30 days."},{"Start":"00:08.720 ","End":"00:10.830","Text":"By the end of this tutorial, you’ll"},{"Start":"00:10.830 ","End":"00:13.080","Text":"be able to 3D model a paper clip."},{"Start":"00:13.870 ","End":"00:15.130","Text":"We’ll take a look at how to use"},{"Start":"00:15.130 ","End":"00:17.169","Text":"the line command, how to create"},{"Start":"00:17.180 ","End":"00:19.380","Text":"sketch fillets, and how to create"},{"Start":"00:19.430 ","End":"00:21.740","Text":"a sweep with a sketch profile."},{"Start":"00:22.640 ","End":"00:24.660","Text":"Before we get started, let’s make sure"},{"Start":"00:24.660 ","End":"00:27.080","Text":"our dimensions are set to millimeters."},{"Start":"00:27.689 ","End":"00:29.809","Text":"In the first video, I showed you how to"},{"Start":"00:29.809 ","End":"00:32.220","Text":"change dimensions in the preferences menu."},{"Start":"00:32.820 ","End":"00:34.680","Text":"We can also change dimensions"},{"Start":"00:34.699 ","End":"00:36.559","Text":"in the Fusion 360 browser."},{"Start":"00:37.390 ","End":"00:39.580","Text":"To change dimensions in the Fusion 360"},{"Start":"00:39.580 ","End":"00:41.810","Text":"browser you’ll have to click on the caret"},{"Start":"00:41.860 ","End":"00:44.820","Text":"icon to toggle open the document settings."},{"Start":"00:46.000 ","End":"00:47.589","Text":"Then, you’ll see as I hover"},{"Start":"00:47.589 ","End":"00:49.749","Text":"my mouse over the units, an"},{"Start":"00:49.780 ","End":"00:51.740","Text":"icon will appear on the right."},{"Start":"00:52.239 ","End":"00:53.819","Text":"I’ll click on the “change active"},{"Start":"00:53.830 ","End":"00:56.140","Text":"units” icon, which opens up the"},{"Start":"00:56.150 ","End":"00:58.599","Text":"“change active units” dialog box."},{"Start":"00:59.660 ","End":"01:01.630","Text":"I’ll simply select millimeters"},{"Start":"01:01.630 ","End":"01:03.410","Text":"from the dropdown list and I’ll"},{"Start":"01:03.410 ","End":"01:05.960","Text":"click OK to confirm the change."},{"Start":"01:06.910 ","End":"01:08.990","Text":"Let’s now get started with the paper clip"},{"Start":"01:09.020 ","End":"01:11.759","Text":"by creating a sketch on the top plane."},{"Start":"01:12.459 ","End":"01:14.869","Text":"I’ll select the “create sketch” icon"},{"Start":"01:14.900 ","End":"01:17.500","Text":"in the toolbar… and I’ll select the"},{"Start":"01:18.280 ","End":"01:21.120","Text":"XY origin plane, and Fusion 360 will"},{"Start":"01:21.160 ","End":"01:22.990","Text":"automatically re-orient the sketch"},{"Start":"01:22.990 ","End":"01:25.619","Text":"plane so we’re looking directly at it."},{"Start":"01:27.000 ","End":"01:28.609","Text":"I’m going to draw out some sketch"},{"Start":"01:28.619 ","End":"01:30.510","Text":"geometry that we’ll use later on,"},{"Start":"01:30.510 ","End":"01:32.580","Text":"as the path for the sweep command."},{"Start":"01:33.560 ","End":"01:34.370","Text":"We’ll start out by"},{"Start":"01:34.380 ","End":"01:36.000","Text":"sketching a straight line."},{"Start":"01:36.620 ","End":"01:38.390","Text":"If you remember from the last two"},{"Start":"01:38.390 ","End":"01:41.089","Text":"videos, the line command is under the"},{"Start":"01:41.099 ","End":"01:44.420","Text":"sketch dropdown list… however, we can"},{"Start":"01:44.480 ","End":"01:46.379","Text":"also call the line command with the"},{"Start":"01:46.379 ","End":"01:49.190","Text":"keyboard shortcut letter “L,” as in Lima."},{"Start":"01:50.820 ","End":"01:52.560","Text":"To place this first line I’ll"},{"Start":"01:52.560 ","End":"01:54.780","Text":"simply click on the center origin."},{"Start":"01:55.560 ","End":"01:57.899","Text":"I’ll drag my mouse cursor towards the top,"},{"Start":"01:58.320 ","End":"02:01.159","Text":"and I’ll type out 20mm for the distance."},{"Start":"02:01.950 ","End":"02:04.249","Text":"After typing out 20mm I’ll hit"},{"Start":"02:04.250 ","End":"02:06.519","Text":"the tab key on my keyboard, which"},{"Start":"02:06.520 ","End":"02:08.109","Text":"locks the dimension in place."},{"Start":"02:09.479 ","End":"02:11.480","Text":"You’ll notice after I hit the tab key to"},{"Start":"02:11.480 ","End":"02:13.970","Text":"lock the dimension in place, this gold"},{"Start":"02:13.980 ","End":"02:17.030","Text":"lock icon appeared next to the dimension."},{"Start":"02:18.170 ","End":"02:19.740","Text":"This ensures that as I move my"},{"Start":"02:19.740 ","End":"02:21.700","Text":"mouse cursor around the distance"},{"Start":"02:21.730 ","End":"02:23.569","Text":"is not accidentally changed."},{"Start":"02:24.520 ","End":"02:26.459","Text":"I’ll now click with my mouse to set"},{"Start":"02:26.479 ","End":"02:28.760","Text":"the line on this vertical Y-axis,"},{"Start":"02:29.510 ","End":"02:31.130","Text":"where the line snaps into place,"},{"Start":"02:31.300 ","End":"02:33.120","Text":"ensuring that the line is vertical."},{"Start":"02:34.450 ","End":"02:35.940","Text":"As I move my mouse cursor out,"},{"Start":"02:36.270 ","End":"02:37.700","Text":"you\u0027ll notice that the line command"},{"Start":"02:37.700 ","End":"02:39.739","Text":"remains active so we can continue"},{"Start":"02:39.740 ","End":"02:42.600","Text":"to create more lines, until we hit"},{"Start":"02:42.600 ","End":"02:44.850","Text":"the escape key to exit the command."},{"Start":"02:46.130 ","End":"02:47.880","Text":"For the next line, I’ll move to"},{"Start":"02:47.880 ","End":"02:52.049","Text":"the right and I’ll type out 7.5mm."},{"Start":"02:52.059 ","End":"02:53.800","Text":"Once again, I’ll hit the tab key"},{"Start":"02:53.800 ","End":"02:55.410","Text":"to lock the dimension in place."},{"Start":"02:56.400 ","End":"02:57.780","Text":"You’ll notice that the line command"},{"Start":"02:57.820 ","End":"03:00.209","Text":"also gives us the degree input field."},{"Start":"03:00.820 ","End":"03:02.840","Text":"I want this line to be horizontal so"},{"Start":"03:02.840 ","End":"03:05.550","Text":"I’ll type out 90 degrees, followed by"},{"Start":"03:05.550 ","End":"03:07.930","Text":"the tab key to lock the degrees in place."},{"Start":"03:09.550 ","End":"03:11.460","Text":"This makes sure that all I can do is"},{"Start":"03:11.460 ","End":"03:13.700","Text":"click with my mouse to set the line on"},{"Start":"03:13.700 ","End":"03:16.659","Text":"either the left or right side… so I’ll"},{"Start":"03:16.660 ","End":"03:18.650","Text":"click to place the line on the right"},{"Start":"03:18.660 ","End":"03:21.360","Text":"side, ensuring that it\u0027s horizontal."},{"Start":"03:22.620 ","End":"03:24.500","Text":"Next, with the line command still"},{"Start":"03:24.500 ","End":"03:26.450","Text":"active, I’ll draw a heading towards"},{"Start":"03:26.450 ","End":"03:28.839","Text":"the bottom, typing out 30mm for"},{"Start":"03:29.050 ","End":"03:30.960","Text":"the length, followed by the tab"},{"Start":"03:30.960 ","End":"03:32.890","Text":"key to lock the dimension in place."},{"Start":"03:34.059 ","End":"03:36.320","Text":"You’ll notice as I move my mouse cursor"},{"Start":"03:36.340 ","End":"03:38.630","Text":"left and right that it will snap into"},{"Start":"03:38.630 ","End":"03:41.529","Text":"place at a perfect 90 degrees, even if"},{"Start":"03:41.530 ","End":"03:43.580","Text":"I don’t type it out in the input field."},{"Start":"03:44.880 ","End":"03:46.700","Text":"Making sure that the line is"},{"Start":"03:46.700 ","End":"03:48.460","Text":"at 90 degrees, I’ll click with"},{"Start":"03:48.460 ","End":"03:50.200","Text":"my mouse to place the line."},{"Start":"03:51.410 ","End":"03:53.820","Text":"For the next line, I’ll go to the left."},{"Start":"03:54.070 ","End":"03:57.769","Text":"I’ll make this line 6.5mm, followed by the"},{"Start":"03:57.800 ","End":"04:00.070","Text":"tab key to lock the dimension in place."},{"Start":"04:01.440 ","End":"04:03.659","Text":"Once again, I want this line to be at 90"},{"Start":"04:03.660 ","End":"04:05.850","Text":"degrees, so I’ll click to place the line"},{"Start":"04:05.860 ","End":"04:08.329","Text":"where it snaps in at a 90-degree angle."},{"Start":"04:09.519 ","End":"04:11.649","Text":"With the line command still active, I’ll"},{"Start":"04:11.650 ","End":"04:13.910","Text":"draw a line heading towards the top."},{"Start":"04:14.660 ","End":"04:17.760","Text":"I’ll make this line 22mm, followed by the"},{"Start":"04:17.760 ","End":"04:19.899","Text":"tab key to lock the dimension in place…"},{"Start":"04:21.010 ","End":"04:22.700","Text":"and once again I’ll make sure that I"},{"Start":"04:22.770 ","End":"04:25.519","Text":"click to place the line at 90 degrees."},{"Start":"04:26.940 ","End":"04:30.289","Text":"The second to last line will be 5.5mm"},{"Start":"04:30.299 ","End":"04:32.680","Text":"to the right, followed by the tab key"},{"Start":"04:32.710 ","End":"04:34.990","Text":"to lock the dimension in place… and I’ll"},{"Start":"04:34.990 ","End":"04:37.840","Text":"make sure this line is horizontal or"},{"Start":"04:37.870 ","End":"04:41.589","Text":"perpendicular from the previous line."},{"Start":"04:41.590 ","End":"04:43.390","Text":"Lastly, I’ll create the last line for"},{"Start":"04:43.390 ","End":"04:45.760","Text":"this paper clip shape by drawing a line"},{"Start":"04:45.770 ","End":"04:49.130","Text":"down to the red “X” axis by typing out"},{"Start":"04:49.140 ","End":"04:51.790","Text":"12mm for the length, followed by the"},{"Start":"04:51.790 ","End":"04:54.150","Text":"tab key to lock the dimension in place."},{"Start":"04:55.910 ","End":"04:58.380","Text":"I’ll simply click on the X-axis"},{"Start":"04:58.389 ","End":"05:00.510","Text":"where the line will snap into place."},{"Start":"05:01.680 ","End":"05:03.099","Text":"If your line doesn’t seem to be"},{"Start":"05:03.099 ","End":"05:04.820","Text":"snapping then be sure that you have"},{"Start":"05:04.820 ","End":"05:07.880","Text":"your “sketch grid” and the “snap” option"},{"Start":"05:07.880 ","End":"05:10.260","Text":"turned on, in your sketch palette."},{"Start":"05:12.440 ","End":"05:14.099","Text":"Now that we’re done using the line"},{"Start":"05:14.099 ","End":"05:15.860","Text":"command we’ll hit the escape key on"},{"Start":"05:15.860 ","End":"05:17.720","Text":"the keyboard to close the command."},{"Start":"05:18.630 ","End":"05:20.539","Text":"You’ll notice as we created these lines"},{"Start":"05:20.549 ","End":"05:22.510","Text":"that dimension lines were automatically"},{"Start":"05:22.510 ","End":"05:24.720","Text":"placed as we set the lines in place."},{"Start":"05:25.520 ","End":"05:26.920","Text":"As your working with sketches in"},{"Start":"05:26.920 ","End":"05:29.220","Text":"Fusion 360, you may want to move"},{"Start":"05:29.220 ","End":"05:30.820","Text":"these dimensions out of the way."},{"Start":"05:31.410 ","End":"05:33.800","Text":"To do this, simply click and drag on"},{"Start":"05:33.800 ","End":"05:36.159","Text":"the dimensions and we’ll move them"},{"Start":"05:36.170 ","End":"05:37.850","Text":"out of our way for now so they’re not"},{"Start":"05:37.900 ","End":"05:40.500","Text":"interfering with our sketch geometry."},{"Start":"05:43.130 ","End":"05:44.830","Text":"Now that we have a rough outline"},{"Start":"05:44.850 ","End":"05:46.510","Text":"of a paper clip shape, we’ll need"},{"Start":"05:46.610 ","End":"05:48.410","Text":"round over all of the corners"},{"Start":"05:48.450 ","End":"05:50.359","Text":"before we can use the sweep command."},{"Start":"05:51.150 ","End":"05:52.789","Text":"To round over the corners, we’ll"},{"Start":"05:52.790 ","End":"05:54.610","Text":"want to use the fillet command."},{"Start":"05:55.349 ","End":"05:57.409","Text":"One important thing to note is that"},{"Start":"05:57.410 ","End":"05:59.014","Text":"the keyboard shortcut letter “F,”"},{"Start":"05:59.250 ","End":"06:01.700","Text":"as in Foxtrot, is used to call the"},{"Start":"06:01.720 ","End":"06:04.560","Text":"model Fillet command… but that command"},{"Start":"06:04.570 ","End":"06:06.970","Text":"only works for 3-dimensional objects."},{"Start":"06:07.780 ","End":"06:09.490","Text":"Because we\u0027re currently working with"},{"Start":"06:09.490 ","End":"06:11.840","Text":"sketch geometry, or 2-dimensional"},{"Start":"06:11.840 ","End":"06:13.930","Text":"objects, we’ll want to make sure we"},{"Start":"06:13.930 ","End":"06:16.469","Text":"select the “sketch fillet” command from"},{"Start":"06:17.430 ","End":"06:20.340","Text":"the sketch dropdown list… and you’ll"},{"Start":"06:20.340 ","End":"06:22.800","Text":"see this fillet command doesn’t have"},{"Start":"06:22.850 ","End":"06:24.960","Text":"a keyboard shortcut applied to it."},{"Start":"06:25.870 ","End":"06:27.790","Text":"As you’re working in Fusion 360"},{"Start":"06:27.800 ","End":"06:29.770","Text":"you’ll find it tedious to go to the"},{"Start":"06:29.800 ","End":"06:31.790","Text":"toolbar dropdown menus every time"},{"Start":"06:31.800 ","End":"06:33.600","Text":"you’re trying to activate a command."},{"Start":"06:34.619 ","End":"06:37.330","Text":"An alternative way, which is much faster,"},{"Start":"06:37.570 ","End":"06:39.750","Text":"would be to use the “Shortcuts” box."},{"Start":"06:41.040 ","End":"06:43.260","Text":"The shortcuts box can be activated"},{"Start":"06:43.300 ","End":"06:44.539","Text":"with the keyboard shortcut"},{"Start":"06:44.540 ","End":"06:46.559","Text":"letter “S,” as in Sierra."},{"Start":"06:47.469 ","End":"06:49.710","Text":"You’ll see the shortcuts dialog box"},{"Start":"06:49.730 ","End":"06:51.789","Text":"opens up… and I can type out any"},{"Start":"06:51.790 ","End":"06:54.010","Text":"of the sketch or modeling commands."},{"Start":"06:55.080 ","End":"06:57.090","Text":"I’ll type out fillet and select"},{"Start":"06:57.090 ","End":"06:58.800","Text":"the one that is for sketch"},{"Start":"06:58.810 ","End":"07:01.440","Text":"geometry, not this other one that"},{"Start":"07:01.440 ","End":"07:03.519","Text":"is for 3-dimensional objects."},{"Start":"07:04.469 ","End":"07:06.810","Text":"With the fillet command active, I’ll go"},{"Start":"07:06.810 ","End":"07:09.420","Text":"ahead and select the top two corners."},{"Start":"07:10.410 ","End":"07:12.009","Text":"Because we want this paper clip"},{"Start":"07:12.010 ","End":"07:13.740","Text":"to have a smooth transition from"},{"Start":"07:13.760 ","End":"07:15.640","Text":"corner to corner, the fillet"},{"Start":"07:15.640 ","End":"07:19.469","Text":"radius will be 7.5 divided by 2."},{"Start":"07:20.200 ","End":"07:21.920","Text":"So we’re going to take the width"},{"Start":"07:21.929 ","End":"07:23.859","Text":"of our line, divided by the"},{"Start":"07:23.860 ","End":"07:25.599","Text":"number of edges we are rounding."},{"Start":"07:26.380 ","End":"07:29.320","Text":"Therefore, I’ll type out 3.75mm"},{"Start":"07:30.010 ","End":"07:31.900","Text":"in the input field, and I’ll hit"},{"Start":"07:32.100 ","End":"07:34.800","Text":"enter to apply the fillet radius."},{"Start":"07:35.760 ","End":"07:37.700","Text":"Immediately after I hit enter,"},{"Start":"07:37.730 ","End":"07:39.440","Text":"you’ll notice the lines now"},{"Start":"07:39.440 ","End":"07:41.710","Text":"have a rounded edge or corner."},{"Start":"07:42.460 ","End":"07:44.000","Text":"I’ll want to next add fillets"},{"Start":"07:44.009 ","End":"07:45.670","Text":"to these bottom two corners."},{"Start":"07:45.969 ","End":"07:47.930","Text":"I’ll right-click to select “repeat"},{"Start":"07:47.930 ","End":"07:49.620","Text":"fillet” from the marking-menu."},{"Start":"07:50.330 ","End":"07:51.850","Text":"It’s here that you’ll always"},{"Start":"07:51.850 ","End":"07:53.250","Text":"be able to quickly access"},{"Start":"07:53.270 ","End":"07:55.280","Text":"the most recent command used."},{"Start":"07:56.220 ","End":"07:57.880","Text":"With the fillet command active,"},{"Start":"07:57.920 ","End":"07:59.680","Text":"I’ll select both corners...and I’ll"},{"Start":"07:59.680 ","End":"08:04.129","Text":"type out 3.25mm… and you’ll notice"},{"Start":"08:04.129 ","End":"08:06.120","Text":"that the sketch starts to go crazy."},{"Start":"08:07.150 ","End":"08:08.930","Text":"In the original tutorial, I"},{"Start":"08:08.930 ","End":"08:10.719","Text":"didn’t cover constraints, as I"},{"Start":"08:10.720 ","End":"08:12.460","Text":"introduce the concept of sketch"},{"Start":"08:12.460 ","End":"08:14.530","Text":"constraints later on in this course…."},{"Start":"08:15.360 ","End":"08:17.509","Text":"however, many people notified me that"},{"Start":"08:17.509 ","End":"08:19.570","Text":"they had problems with their sketch"},{"Start":"08:19.580 ","End":"08:21.110","Text":"geometry getting thrown out of shape."},{"Start":"08:22.129 ","End":"08:23.472","Text":"I’ll hit the undo button, in the"},{"Start":"08:23.472 ","End":"08:26.190","Text":"toolbar, twice… to undo the most"},{"Start":"08:26.190 ","End":"08:28.390","Text":"recent fillet command...and to make"},{"Start":"08:28.390 ","End":"08:31.040","Text":"the sketch geometry go back to normal."},{"Start":"08:32.789 ","End":"08:34.829","Text":"We’ll want to add some sketch constraints,"},{"Start":"08:34.849 ","End":"08:36.690","Text":"which will help ensure the shape of our"},{"Start":"08:36.690 ","End":"08:39.589","Text":"sketch geometry isn’t altered as we add"},{"Start":"08:39.599 ","End":"08:41.709","Text":"fillets to these bottom two corners."},{"Start":"08:42.520 ","End":"08:44.270","Text":"Later on in this course, I’ll cover"},{"Start":"08:44.270 ","End":"08:46.270","Text":"the topic of sketch constraints much"},{"Start":"08:46.270 ","End":"08:48.430","Text":"more in-depth… but for now, we’ll"},{"Start":"08:48.430 ","End":"08:50.740","Text":"simply add a few sketch constraints."},{"Start":"08:52.530 ","End":"08:54.060","Text":"If you look in the sketch palette,"},{"Start":"08:54.120 ","End":"08:55.530","Text":"you’ll notice a list of the"},{"Start":"08:55.530 ","End":"08:56.990","Text":"available sketch constraints."},{"Start":"08:57.929 ","End":"08:59.660","Text":"You’ll also notice that we already have"},{"Start":"08:59.660 ","End":"09:01.860","Text":"some constraint icons in our sketch,"},{"Start":"09:02.290 ","End":"09:03.835","Text":"as these were automatically created for"},{"Start":"09:03.835 ","End":"09:06.360","Text":"us as we drew out the sketch geometry."},{"Start":"09:06.890 ","End":"09:09.330","Text":"This first line has a vertical constraint"},{"Start":"09:09.330 ","End":"09:11.090","Text":"because the line snapped into this"},{"Start":"09:11.110 ","End":"09:13.640","Text":"Y-axis….and, you’ll notice we have"},{"Start":"09:13.650 ","End":"09:15.470","Text":"many perpendicular constraints in"},{"Start":"09:15.470 ","End":"09:17.769","Text":"the corners, as we were ensuring that"},{"Start":"09:17.770 ","End":"09:19.550","Text":"our lines snapped in where the line"},{"Start":"09:19.560 ","End":"09:21.980","Text":"was 90 degrees to the previous line."},{"Start":"09:22.970 ","End":"09:24.950","Text":"To manually add another sketch"},{"Start":"09:24.970 ","End":"09:26.620","Text":"constraint, I’ll simply click on the"},{"Start":"09:26.620 ","End":"09:29.709","Text":"line on the right side...and I’ll"},{"Start":"09:29.710 ","End":"09:32.160","Text":"select the horizontal / [slash] vertical"},{"Start":"09:32.160 ","End":"09:34.310","Text":"constraint in the sketch palette."},{"Start":"09:35.379 ","End":"09:37.329","Text":"Adding this vertical constraint will"},{"Start":"09:37.329 ","End":"09:39.580","Text":"ensure that this line stays vertical"},{"Start":"09:39.630 ","End":"09:41.780","Text":"as we re-try those sketch fillets."},{"Start":"09:41.780 ","End":"09:42.190","Text":"Before adding the last two fillets I’ll"},{"Start":"09:42.190 ","End":"09:42.660","Text":"select the left inside line, and I’ll add"},{"Start":"09:42.660 ","End":"09:43.071","Text":"a vertical constraint to that as well."},{"Start":"09:43.130 ","End":"09:45.189","Text":"Once again, I’ll activate the sketch"},{"Start":"09:45.189 ","End":"09:46.709","Text":"fillet command, and I’ll click"},{"Start":"09:46.710 ","End":"09:48.430","Text":"on the bottom two corners again."},{"Start":"09:50.450 ","End":"09:53.400","Text":"I’ll type out 3.25mm...and I’ll"},{"Start":"09:53.400 ","End":"09:55.300","Text":"hit the enter key on my keyboard."},{"Start":"09:56.570 ","End":"09:58.550","Text":"This time, you’ll notice we were able"},{"Start":"09:58.550 ","End":"10:00.599","Text":"to add the fillet without skewing the"},{"Start":"10:00.600 ","End":"10:03.110","Text":"sketch geometry because we added that"},{"Start":"10:03.120 ","End":"10:06.250","Text":"vertical constraint...and again, this"},{"Start":"10:06.270 ","End":"10:09.049","Text":"concept of manually adding constraints to"},{"Start":"10:09.049 ","End":"10:10.979","Text":"sketches is something I cover much more"},{"Start":"10:10.980 ","End":"10:14.630","Text":"in-depth later on in this course, once"},{"Start":"10:15.000 ","End":"10:17.020","Text":"you have a solid foundation of some of"},{"Start":"10:17.030 ","End":"10:20.560","Text":"the other core features in Fusion 360."},{"Start":"10:24.290 ","End":"10:34.265","Text":"I’ll activate the sketch fillet"},{"Start":"10:34.420 ","End":"10:36.920","Text":"command once again, and this time"},{"Start":"10:36.950 ","End":"10:39.030","Text":"I’ll select the last two corners."},{"Start":"10:39.670 ","End":"10:42.999","Text":"I’ll type out 2.75mm, followed by"},{"Start":"10:43.000 ","End":"10:45.069","Text":"hitting the enter key on my keyboard."},{"Start":"10:45.860 ","End":"10:47.619","Text":"At this point, we’ll want to stop"},{"Start":"10:47.619 ","End":"10:49.530","Text":"our sketch, so we can create another"},{"Start":"10:49.530 ","End":"10:51.839","Text":"sketch that the sweep command requires."},{"Start":"10:52.410 ","End":"10:54.470","Text":"I’ll select stop sketch in the toolbar…"},{"Start":"10:54.760 ","End":"10:56.650","Text":"and I’ll hit the home icon next to"},{"Start":"10:56.650 ","End":"10:59.160","Text":"the viewcube, to view the paper clip"},{"Start":"10:59.160 ","End":"11:01.269","Text":"outline from the home perspective."},{"Start":"11:02.320 ","End":"11:03.879","Text":"In order to create a sweep that"},{"Start":"11:03.879 ","End":"11:06.050","Text":"follows this paper clip shape, we’ll"},{"Start":"11:06.050 ","End":"11:07.890","Text":"need to draw the sketch profile"},{"Start":"11:07.910 ","End":"11:09.480","Text":"that will be used for the sweep."},{"Start":"11:10.250 ","End":"11:12.230","Text":"In this case, our sketch profile will"},{"Start":"11:12.230 ","End":"11:14.640","Text":"simply be a circle, as a paperclip"},{"Start":"11:14.970 ","End":"11:16.900","Text":"is simply a rounded piece of steel"},{"Start":"11:16.900 ","End":"11:19.170","Text":"wire, bent to a looped shape."},{"Start":"11:19.990 ","End":"11:22.050","Text":"To draw the circle I’ll hit the keyboard"},{"Start":"11:22.050 ","End":"11:24.170","Text":"shortcut letter “C,” as in Charlie,"},{"Start":"11:24.400 ","End":"11:26.580","Text":"to activate the center-circle command."},{"Start":"11:27.870 ","End":"11:29.750","Text":"You’ll notice if we activate a sketch"},{"Start":"11:29.750 ","End":"11:31.969","Text":"command without being in an open sketch,"},{"Start":"11:32.220 ","End":"11:34.069","Text":"then you’ll have to select an origin"},{"Start":"11:34.070 ","End":"11:36.600","Text":"plane or the surface of some preexisting"},{"Start":"11:36.600 ","End":"11:38.790","Text":"geometry to create a sketch on."},{"Start":"11:39.900 ","End":"11:43.710","Text":"I’ll simply select the XZ plane...and"},{"Start":"11:43.710 ","End":"11:45.610","Text":"I’ll zoom in on the geometry."},{"Start":"11:47.200 ","End":"11:48.730","Text":"I’m going to click on the origin"},{"Start":"11:48.730 ","End":"11:50.420","Text":"point, as that was the starting"},{"Start":"11:50.420 ","End":"11:53.259","Text":"point of our paper clip shape...and"},{"Start":"11:53.259 ","End":"11:54.750","Text":"I’ll drag out with my mouse."},{"Start":"11:56.139 ","End":"11:58.810","Text":"I’ll type out 1mm, followed by the tab"},{"Start":"11:58.810 ","End":"12:00.530","Text":"key to lock the dimension in place."},{"Start":"12:01.180 ","End":"12:02.910","Text":"Then, I’ll simply click to"},{"Start":"12:02.910 ","End":"12:04.290","Text":"set the circle in place."},{"Start":"12:05.640 ","End":"12:07.480","Text":"At this point, we’ll want to stop the"},{"Start":"12:07.480 ","End":"12:09.660","Text":"sketch so we can use the sweep command,"},{"Start":"12:09.700 ","End":"12:11.689","Text":"which will actually create the paper clip."},{"Start":"12:12.849 ","End":"12:14.170","Text":"I’ll hit stop sketch in the"},{"Start":"12:14.170 ","End":"12:15.829","Text":"toolbar, and I’ll hit the home"},{"Start":"12:15.830 ","End":"12:17.439","Text":"icon next to the view cube."},{"Start":"12:18.750 ","End":"12:20.580","Text":"I’ll now activate the sweep command"},{"Start":"12:20.590 ","End":"12:22.349","Text":"from the create dropdown list."},{"Start":"12:23.310 ","End":"12:25.160","Text":"As we activate the feature you’ll"},{"Start":"12:25.160 ","End":"12:27.790","Text":"notice the sweep dialog box opened up."},{"Start":"12:28.830 ","End":"12:31.150","Text":"If you ever forget what a feature does you"},{"Start":"12:31.150 ","End":"12:33.970","Text":"can always look at the dialog box and work"},{"Start":"12:33.970 ","End":"12:36.140","Text":"your way through it, starting at the top"},{"Start":"12:36.230 ","End":"12:38.070","Text":"and working your way down to the bottom."},{"Start":"12:39.060 ","End":"12:40.280","Text":"The first thing you’ll see with the"},{"Start":"12:40.310 ","End":"12:42.460","Text":"sweep command is the type of path."},{"Start":"12:42.950 ","End":"12:44.820","Text":"We have one continuous path"},{"Start":"12:44.910 ","End":"12:46.560","Text":"for our shape, so we’ll make"},{"Start":"12:46.560 ","End":"12:48.649","Text":"sure “single path” is selected."},{"Start":"12:50.500 ","End":"12:51.799","Text":"Then, it wants us to"},{"Start":"12:51.799 ","End":"12:53.290","Text":"select our profile shape."},{"Start":"12:54.020 ","End":"12:55.720","Text":"As I mentioned earlier, our"},{"Start":"12:55.720 ","End":"12:57.650","Text":"profile is the circle and the"},{"Start":"12:57.660 ","End":"12:59.449","Text":"paper clip shape is the path."},{"Start":"13:00.250 ","End":"13:03.340","Text":"I’ll select the circle, click on the path"},{"Start":"13:03.340 ","End":"13:06.730","Text":"selection in the dialog box...and I’ll"},{"Start":"13:06.730 ","End":"13:08.980","Text":"select the path in the canvas window."},{"Start":"13:09.950 ","End":"13:11.880","Text":"The last few options in the sweep"},{"Start":"13:11.900 ","End":"13:14.750","Text":"dialog box are okay for now...I’ll"},{"Start":"13:14.750 ","End":"13:17.270","Text":"simply click OK in the dialog"},{"Start":"13:17.280 ","End":"13:19.360","Text":"box to confirm the sweep command."},{"Start":"13:20.030 ","End":"13:20.266","Text":"Don’t forget to save it"},{"Start":"13:20.266 ","End":"13:21.430","Text":"if you haven’t already."},{"Start":"13:22.800 ","End":"13:28.910","Text":"I’m going to name this “Paper Clip.”..."},{"Start":"13:30.400 ","End":"13:32.240","Text":"and of course you can toggle open this"},{"Start":"13:32.240 ","End":"13:34.700","Text":"location section to choose where this"},{"Start":"13:34.700 ","End":"13:36.820","Text":"file will save in your data panel."},{"Start":"13:38.020 ","End":"13:39.700","Text":"Last but not least, if your paper"},{"Start":"13:39.700 ","End":"13:41.490","Text":"clip looks like it’s broken up"},{"Start":"13:41.490 ","End":"13:43.420","Text":"into sections, it\u0027s because of"},{"Start":"13:43.420 ","End":"13:45.269","Text":"the visual style setting you have."},{"Start":"13:46.059 ","End":"13:48.219","Text":"To change the visual style, head"},{"Start":"13:48.230 ","End":"13:50.580","Text":"down to the display settings… the"},{"Start":"13:50.590 ","End":"13:53.260","Text":"visual style flyout folder, and"},{"Start":"13:53.260 ","End":"13:55.260","Text":"then select the “shaded” option,"},{"Start":"13:59.200 ","End":"13:59.280","Text":"which will remove those edge lines."}],"ID":28986},{"Watched":false,"Name":"Day 4 - 3D Model a Whiskey Bottle","Duration":"24m 13s","ChapterTopicVideoID":27784,"CourseChapterTopicPlaylistID":275347,"HasSubtitles":true,"ThumbnailPath":null,"UploadDate":null,"DurationForVideoObject":null,"Description":null,"MetaTitle":null,"MetaDescription":null,"Canonical":null,"VideoComments":[],"Subtitles":[{"Start":"00:01.120 ","End":"00:02.040","Text":"Kevin Kennedy: Hey there, it’s"},{"Start":"00:02.040 ","End":"00:03.830","Text":"Kevin Kennedy, and welcome to"},{"Start":"00:03.830 ","End":"00:06.069","Text":"this revised version of day #4"},{"Start":"00:06.560 ","End":"00:09.160","Text":"of Learn Fusion 360 in 30 days."},{"Start":"00:09.990 ","End":"00:12.280","Text":"By the end of this tutorial, you’ll"},{"Start":"00:12.280 ","End":"00:14.630","Text":"know how to 3D model a whiskey bottle."},{"Start":"00:15.380 ","End":"00:17.140","Text":"You’ll learn how to: create offset"},{"Start":"00:17.140 ","End":"00:19.779","Text":"planes, use the loft feature,"},{"Start":"00:20.259 ","End":"00:21.709","Text":"and how to create threads."},{"Start":"00:27.780 ","End":"00:29.240","Text":"To get started, we\u0027re going"},{"Start":"00:29.240 ","End":"00:31.179","Text":"to draw four different closed"},{"Start":"00:31.230 ","End":"00:33.869","Text":"profiles on four different planes."},{"Start":"00:35.000 ","End":"00:37.260","Text":"Then, we’ll use the loft command to"},{"Start":"00:37.270 ","End":"00:39.510","Text":"connect all four closed profiles,"},{"Start":"00:39.800 ","End":"00:41.440","Text":"which will create the overall"},{"Start":"00:41.440 ","End":"00:43.210","Text":"shape of the whiskey bottle."},{"Start":"00:44.269 ","End":"00:46.470","Text":"First, I’ll create a new component"},{"Start":"00:46.480 ","End":"00:48.059","Text":"by selecting “new component”"},{"Start":"00:48.090 ","End":"00:50.100","Text":"from the assemble dropdown list."},{"Start":"00:51.580 ","End":"00:53.179","Text":"Then, I’ll type out “Whiskey"},{"Start":"00:53.180 ","End":"00:54.929","Text":"Bottle” for the component name,"},{"Start":"00:55.170 ","End":"00:57.010","Text":"before clicking the “okay” button."},{"Start":"00:58.390 ","End":"01:00.240","Text":"For the first profile, we’ll"},{"Start":"01:00.240 ","End":"01:02.650","Text":"sketch on the XY origin plane."},{"Start":"01:03.700 ","End":"01:05.870","Text":"I’m going to start out by activating the"},{"Start":"01:05.880 ","End":"01:09.280","Text":"center-rectangle from the sketch list."},{"Start":"01:10.010 ","End":"01:11.490","Text":"You’ll find it nested under"},{"Start":"01:11.490 ","End":"01:13.360","Text":"the rectangle flyout folder."},{"Start":"01:15.980 ","End":"01:17.750","Text":"Then, I’ll click on the bottom"},{"Start":"01:17.830 ","End":"01:20.010","Text":"XY origin plane, as that’s where"},{"Start":"01:20.010 ","End":"01:22.480","Text":"we want the first profile to be."},{"Start":"01:25.480 ","End":"01:27.080","Text":"After clicking on the origin"},{"Start":"01:27.080 ","End":"01:29.169","Text":"plane, you’ll see that Fusion 360"},{"Start":"01:29.230 ","End":"01:31.180","Text":"automatically reorients the plane"},{"Start":"01:31.380 ","End":"01:33.380","Text":"so we’re looking directly at it."},{"Start":"01:35.400 ","End":"01:37.350","Text":"I’ll click on the center origin, and"},{"Start":"01:37.350 ","End":"01:39.300","Text":"I’ll drag it out with my mouse cursor."},{"Start":"01:40.139 ","End":"01:42.140","Text":"We can now type out our desired"},{"Start":"01:42.150 ","End":"01:44.059","Text":"dimensions of the rectangle."},{"Start":"01:44.650 ","End":"01:48.059","Text":"I’m going to type out 76mm for the width."},{"Start":"01:48.900 ","End":"01:51.410","Text":"I’ll then hit the tab key, which locks"},{"Start":"01:51.430 ","End":"01:53.720","Text":"the dimension in place and switches"},{"Start":"01:53.740 ","End":"01:55.990","Text":"the cursor to the other input field."},{"Start":"01:57.139 ","End":"01:59.549","Text":"I’ll type out 63mm for the"},{"Start":"01:59.550 ","End":"02:01.909","Text":"height, followed by the tab key"},{"Start":"02:01.929 ","End":"02:03.829","Text":"to lock this dimension in place."},{"Start":"02:05.699 ","End":"02:08.619","Text":"To clarify, by hitting the tab key, we’re"},{"Start":"02:08.620 ","End":"02:11.410","Text":"simply locking the dimensions in place so"},{"Start":"02:11.410 ","End":"02:14.070","Text":"we don’t accidentally change them or move"},{"Start":"02:14.070 ","End":"02:17.250","Text":"them as we move our mouse cursor around."},{"Start":"02:18.690 ","End":"02:20.790","Text":"Now that both dimensions are filled out,"},{"Start":"02:20.900 ","End":"02:23.449","Text":"I’ll click to set the rectangle in place."},{"Start":"02:25.400 ","End":"02:27.110","Text":"We’ll now want to add rounded"},{"Start":"02:27.110 ","End":"02:28.670","Text":"corners to our rectangle."},{"Start":"02:29.390 ","End":"02:32.000","Text":"If you remember in the last tutorial, the"},{"Start":"02:32.010 ","End":"02:33.875","Text":"quickest way to get to the sketch fillet"},{"Start":"02:34.020 ","End":"02:37.970","Text":"command is by using the shortcuts box."},{"Start":"02:39.230 ","End":"02:40.639","Text":"I’ll hit the keyboard shortcut"},{"Start":"02:40.670 ","End":"02:42.900","Text":"letter “S,” as in Sierra, to"},{"Start":"02:42.900 ","End":"02:44.709","Text":"activate the shortcuts box."},{"Start":"02:46.060 ","End":"02:49.490","Text":"Then, I’ll type out “fillet.” Now it’s"},{"Start":"02:49.490 ","End":"02:51.850","Text":"important that you select the sketch"},{"Start":"02:51.850 ","End":"02:54.570","Text":"fillet tool, which has the 2-dimensional"},{"Start":"02:54.580 ","End":"02:57.770","Text":"symbol, and not the 3D fillet tool."},{"Start":"02:59.309 ","End":"03:00.810","Text":"After the fillet command is"},{"Start":"03:00.840 ","End":"03:02.740","Text":"activated, I’ll click on each"},{"Start":"03:02.740 ","End":"03:04.690","Text":"side of the corner lines."},{"Start":"03:09.980 ","End":"03:11.620","Text":"Then, I’ll type out 7mm"},{"Start":"03:12.370 ","End":"03:13.769","Text":"for the fillet radius."},{"Start":"03:14.750 ","End":"03:16.849","Text":"Clicking enter will"},{"Start":"03:17.129 ","End":"03:19.159","Text":"confirm the fillet changes."},{"Start":"03:20.790 ","End":"03:22.570","Text":"At this point, I’ll go ahead and"},{"Start":"03:22.570 ","End":"03:24.130","Text":"stop the sketch by hitting the"},{"Start":"03:24.140 ","End":"03:26.269","Text":"stop sketch button in the toolbar."},{"Start":"03:27.460 ","End":"03:28.390","Text":"We’ll now create the"},{"Start":"03:28.390 ","End":"03:30.020","Text":"second closed profile."},{"Start":"03:30.960 ","End":"03:33.359","Text":"In order to create a sketch above"},{"Start":"03:33.360 ","End":"03:35.429","Text":"this one, we’ll need to create a"},{"Start":"03:35.459 ","End":"03:37.700","Text":"construction plane, as we’re not"},{"Start":"03:37.720 ","End":"03:40.180","Text":"able to simply sketch in space."},{"Start":"03:41.800 ","End":"03:44.120","Text":"I’ll select the construct dropdown menu."},{"Start":"03:44.690 ","End":"03:46.740","Text":"Then, I’ll select the offset"},{"Start":"03:46.740 ","End":"03:49.030","Text":"construction plane, as it allows us"},{"Start":"03:49.040 ","End":"03:51.899","Text":"to create a plane a specified distance"},{"Start":"03:51.940 ","End":"03:54.100","Text":"away from any pre-existing planes."},{"Start":"03:55.420 ","End":"03:57.530","Text":"After activating the offset plane"},{"Start":"03:57.540 ","End":"03:59.650","Text":"feature you’ll see that we only have"},{"Start":"03:59.660 ","End":"04:02.420","Text":"one option, which is to select the plane"},{"Start":"04:02.440 ","End":"04:04.950","Text":"or face that we want to offset from."},{"Start":"04:07.740 ","End":"04:10.299","Text":"I’ll select the XY origin plane."},{"Start":"04:11.400 ","End":"04:13.730","Text":"After selecting a plane or face"},{"Start":"04:13.760 ","End":"04:16.230","Text":"to offset from, you’ll be prompted"},{"Start":"04:16.230 ","End":"04:18.619","Text":"to type out the offset distance."},{"Start":"04:19.310 ","End":"04:22.279","Text":"I’ll type out 114mm for"},{"Start":"04:22.280 ","End":"04:23.619","Text":"the offset distance."},{"Start":"04:24.300 ","End":"04:26.709","Text":"Then, I’ll confirm the results by clicking"},{"Start":"04:26.710 ","End":"04:29.050","Text":"the “OK” button in the dialog box."},{"Start":"04:30.860 ","End":"04:32.320","Text":"Now that we have this offset"},{"Start":"04:32.320 ","End":"04:34.010","Text":"construction plane, we can use"},{"Start":"04:34.010 ","End":"04:36.250","Text":"it to draw another rectangle or"},{"Start":"04:36.250 ","End":"04:38.390","Text":"the second closed profile shape."},{"Start":"04:39.849 ","End":"04:41.250","Text":"To activate the rectangle"},{"Start":"04:41.559 ","End":"04:43.800","Text":"again, I’ll use the keyboard"},{"Start":"04:43.800 ","End":"04:46.210","Text":"shortcut letter “R,” as in Romeo."},{"Start":"04:47.289 ","End":"04:49.040","Text":"Then, I’ll select the construction"},{"Start":"04:49.040 ","End":"04:51.099","Text":"plane as the plane to sketch on."},{"Start":"04:52.310 ","End":"04:54.150","Text":"You’ll notice the keyboard shortcut"},{"Start":"04:54.210 ","End":"04:56.850","Text":"activates the 2-point rectangle tool."},{"Start":"04:57.830 ","End":"04:59.770","Text":"To switch to the center-rectangle"},{"Start":"04:59.770 ","End":"05:02.050","Text":"tool I’ll simply click the center"},{"Start":"05:02.050 ","End":"05:04.539","Text":"rectangle option in the sketch palette."},{"Start":"05:06.139 ","End":"05:08.550","Text":"This rectangle we’ll make a bit larger,"},{"Start":"05:08.550 ","End":"05:10.560","Text":"so we have a nice tapered shape."},{"Start":"05:11.590 ","End":"05:12.729","Text":"I’m going to click on the"},{"Start":"05:12.740 ","End":"05:14.930","Text":"center origin once again, and"},{"Start":"05:14.930 ","End":"05:16.289","Text":"I’ll drag out with my mouse."},{"Start":"05:18.150 ","End":"05:19.399","Text":"This time I’ll type"},{"Start":"05:19.400 ","End":"05:21.669","Text":"out 95mm for the width."},{"Start":"05:22.389 ","End":"05:24.000","Text":"I’ll hit the tab key to lock the"},{"Start":"05:24.000 ","End":"05:26.190","Text":"dimension in place and to switch"},{"Start":"05:26.220 ","End":"05:28.370","Text":"to the other dimension input field."},{"Start":"05:30.050 ","End":"05:33.050","Text":"Then, I’ll type out 76mm,"},{"Start":"05:33.120 ","End":"05:34.530","Text":"followed by the tab key."},{"Start":"05:35.380 ","End":"05:37.490","Text":"Once all the dimensions are in place"},{"Start":"05:37.549 ","End":"05:40.139","Text":"I’ll click to set the rectangle in place."},{"Start":"05:41.150 ","End":"05:42.710","Text":"Once again, we’ll activate"},{"Start":"05:42.730 ","End":"05:44.200","Text":"the sketch fillet tool."},{"Start":"05:44.800 ","End":"05:46.270","Text":"I’ll hit the escape key to"},{"Start":"05:46.270 ","End":"05:48.440","Text":"clear out any active commands."},{"Start":"05:49.360 ","End":"05:51.335","Text":"You can also access the sketch fillet"},{"Start":"05:51.480 ","End":"05:54.250","Text":"tool by using the right-click sketch menu."},{"Start":"05:55.380 ","End":"06:00.910","Text":"I’ll right-click...select “sketch”...and"},{"Start":"06:00.910 ","End":"06:03.039","Text":"then I’ll select the fillet command."},{"Start":"06:04.650 ","End":"06:06.500","Text":"I’ll select all the lines that make"},{"Start":"06:06.510 ","End":"06:08.210","Text":"up the corners of the rectangle."},{"Start":"06:11.599 ","End":"06:14.030","Text":"Then, for this fillet radius, I’ll type"},{"Start":"06:14.030 ","End":"06:17.390","Text":"out 12mm, followed by hitting the enter"},{"Start":"06:17.390 ","End":"06:20.020","Text":"key on my keyboard to confirm the results."},{"Start":"06:21.510 ","End":"06:23.420","Text":"These first two closed profiles"},{"Start":"06:23.450 ","End":"06:25.330","Text":"will make up the base of the bottle."},{"Start":"06:25.880 ","End":"06:28.009","Text":"We’ll want to create two more that"},{"Start":"06:28.010 ","End":"06:29.690","Text":"we’ll use to create the stem of"},{"Start":"06:29.690 ","End":"06:31.869","Text":"the bottle before we use the loft"},{"Start":"06:31.880 ","End":"06:33.830","Text":"command to join them all together."},{"Start":"06:35.070 ","End":"06:36.620","Text":"I’ll create another offset"},{"Start":"06:36.620 ","End":"06:38.320","Text":"plane by clicking the offset"},{"Start":"06:38.320 ","End":"06:39.500","Text":"plane icon in the toolbar."},{"Start":"06:40.960 ","End":"06:43.100","Text":"This time I’ll go off of the offset"},{"Start":"06:43.100 ","End":"06:46.580","Text":"plane and sketch that we just created."},{"Start":"06:47.420 ","End":"06:50.190","Text":"I’ll punch in 38mm for the distance"},{"Start":"06:50.440 ","End":"06:51.989","Text":"and I’ll click the “OK” button"},{"Start":"06:52.139 ","End":"06:54.470","Text":"in the offset plane dialog box."},{"Start":"06:55.680 ","End":"06:57.620","Text":"For the stem of the bottle, we’ll want"},{"Start":"06:57.620 ","End":"06:59.770","Text":"to create two different sized circles."},{"Start":"07:00.470 ","End":"07:02.080","Text":"To quickly activate the circle"},{"Start":"07:02.090 ","End":"07:03.489","Text":"command I’ll hit the keyboard"},{"Start":"07:03.490 ","End":"07:05.700","Text":"shortcut letter “C,” as in Charlie."},{"Start":"07:07.179 ","End":"07:08.810","Text":"I’ll then click on the construction"},{"Start":"07:08.810 ","End":"07:10.619","Text":"plane that I just created."},{"Start":"07:11.719 ","End":"07:14.040","Text":"Now that the sketch has been activated"},{"Start":"07:14.120 ","End":"07:16.430","Text":"and automatically reoriented, I’ll"},{"Start":"07:16.430 ","End":"07:18.440","Text":"click on the center origin point."},{"Start":"07:19.950 ","End":"07:22.289","Text":"As I drag my mouse cursor out, I’ll"},{"Start":"07:22.290 ","End":"07:25.430","Text":"type out 40mm for the circle\u0027s diameter."},{"Start":"07:26.610 ","End":"07:28.409","Text":"I’ll hit the tab key to lock the"},{"Start":"07:28.410 ","End":"07:31.140","Text":"dimension in place, then I’ll click with"},{"Start":"07:31.140 ","End":"07:33.420","Text":"my mouse to set the circle in place."},{"Start":"07:34.870 ","End":"07:37.310","Text":"I now want to create one last circle,"},{"Start":"07:37.420 ","End":"07:39.529","Text":"which we’ll use for the top of the stem."},{"Start":"07:40.700 ","End":"07:43.770","Text":"One time-saving trick in Fusion 360, is"},{"Start":"07:43.860 ","End":"07:46.030","Text":"the fact that you can activate another"},{"Start":"07:46.030 ","End":"07:48.480","Text":"modeling command, which will automatically"},{"Start":"07:48.490 ","End":"07:50.409","Text":"close the current sketch you’re in."},{"Start":"07:51.490 ","End":"07:53.890","Text":"Instead of hitting the stop sketch button"},{"Start":"07:53.980 ","End":"07:56.420","Text":"in the toolbar, I’ll simply click the"},{"Start":"07:56.480 ","End":"07:59.810","Text":"offset plane button in the toolbar."},{"Start":"08:01.070 ","End":"08:02.890","Text":"You’ll notice that not only stops"},{"Start":"08:02.920 ","End":"08:04.700","Text":"the active sketch, but it also"},{"Start":"08:04.700 ","End":"08:06.880","Text":"activates the offset plane command."},{"Start":"08:07.940 ","End":"08:09.990","Text":"To create this plane, I’ll click the"},{"Start":"08:10.010 ","End":"08:12.570","Text":"construction plane that we created last."},{"Start":"08:12.910 ","End":"08:15.279","Text":"I’ll make this one 89mm"},{"Start":"08:15.349 ","End":"08:17.229","Text":"away from the previous one."},{"Start":"08:17.800 ","End":"08:19.210","Text":"Then, I’ll click the “OK”"},{"Start":"08:19.210 ","End":"08:21.139","Text":"button to confirm the results."},{"Start":"08:22.670 ","End":"08:24.370","Text":"Once again, I’ll hit the keyboard"},{"Start":"08:24.370 ","End":"08:26.539","Text":"shortcut letter “C,” as in Charlie,"},{"Start":"08:26.620 ","End":"08:28.750","Text":"to activate the center-circle command."},{"Start":"08:29.820 ","End":"08:31.550","Text":"I’ll select the offset construction"},{"Start":"08:31.550 ","End":"08:33.590","Text":"plane that I just created, and"},{"Start":"08:33.590 ","End":"08:35.179","Text":"I’ll click on the center origin."},{"Start":"08:36.200 ","End":"08:38.850","Text":"As I drag my mouse cursor out, I’ll type"},{"Start":"08:38.850 ","End":"08:42.419","Text":"out a dimension of 30mm, as I want the top"},{"Start":"08:42.419 ","End":"08:44.680","Text":"of the stem to be a little bit smaller."},{"Start":"08:46.060 ","End":"08:47.700","Text":"Lastly, I’ll hit the stop"},{"Start":"08:47.700 ","End":"08:48.770","Text":"sketch button in the toolbar."},{"Start":"08:50.650 ","End":"08:52.340","Text":"I’ll now click the home icon"},{"Start":"08:52.349 ","End":"08:54.209","Text":"next to the viewcube in the upper"},{"Start":"08:54.210 ","End":"08:56.070","Text":"right-hand corner, to take a look"},{"Start":"08:56.080 ","End":"08:58.009","Text":"at the model from the home position."},{"Start":"08:58.920 ","End":"09:01.930","Text":"If you remember in Day #2 we created"},{"Start":"09:01.970 ","End":"09:04.430","Text":"a beer bottle using the revolve tool."},{"Start":"09:04.920 ","End":"09:06.900","Text":"But our whiskey bottle is not a"},{"Start":"09:06.900 ","End":"09:09.270","Text":"symmetrical cylinder shape, so we’re going"},{"Start":"09:09.270 ","End":"09:11.590","Text":"to use the loft tool to join together"},{"Start":"09:11.620 ","End":"09:13.840","Text":"the four sketches that we created..."},{"Start":"09:14.380 ","End":"09:16.300","Text":"because the loft tool creates a"},{"Start":"09:16.300 ","End":"09:18.750","Text":"transitional shape between two or"},{"Start":"09:18.750 ","End":"09:21.290","Text":"more sketches or planar surfaces."},{"Start":"09:23.140 ","End":"09:25.130","Text":"To activate the loft tool I’ll"},{"Start":"09:25.130 ","End":"09:27.280","Text":"select the “create” dropdown list."},{"Start":"09:27.610 ","End":"09:29.970","Text":"Then, I’ll select the “loft” command."},{"Start":"09:31.030 ","End":"09:32.650","Text":"You’ll notice the first section"},{"Start":"09:32.660 ","End":"09:34.557","Text":"in the loft dialogue box is then"},{"Start":"09:34.557 ","End":"09:36.900","Text":"prompting us to select our profiles."},{"Start":"09:38.000 ","End":"09:39.290","Text":"One important thing to note"},{"Start":"09:39.310 ","End":"09:40.800","Text":"here is that the order we"},{"Start":"09:40.800 ","End":"09:43.830","Text":"select our profiles DOES matter."},{"Start":"09:44.550 ","End":"09:46.389","Text":"We can select the closed profile"},{"Start":"09:46.389 ","End":"09:49.160","Text":"shapes from top to bottom or from"},{"Start":"09:49.160 ","End":"09:51.970","Text":"bottom to top, but we cannot select"},{"Start":"09:51.970 ","End":"09:54.680","Text":"them in random order or it will"},{"Start":"09:54.680 ","End":"09:57.080","Text":"create a really crazy twisted shape."},{"Start":"09:58.810 ","End":"10:00.920","Text":"I’ll go ahead and select the four closed"},{"Start":"10:00.950 ","End":"10:03.350","Text":"profiles one by one, starting at the"},{"Start":"10:03.350 ","End":"10:05.660","Text":"bottom and working my way to the top."},{"Start":"10:07.059 ","End":"10:09.159","Text":"Watch what happens as I select them."},{"Start":"10:09.730 ","End":"10:11.319","Text":"You’ll notice it starts to join"},{"Start":"10:11.389 ","End":"10:12.890","Text":"all of the sketches together,"},{"Start":"10:12.920 ","End":"10:14.910","Text":"to create a 3-dimensional shape."},{"Start":"10:15.890 ","End":"10:17.900","Text":"However, if I look at this shape from"},{"Start":"10:17.900 ","End":"10:19.850","Text":"a few different angles… I’m really"},{"Start":"10:19.850 ","End":"10:21.699","Text":"not happy with the overall shape."},{"Start":"10:22.929 ","End":"10:25.480","Text":"Fortunately for us, the loft command lets"},{"Start":"10:25.480 ","End":"10:28.180","Text":"us select guide rails, which we can use"},{"Start":"10:28.180 ","End":"10:30.689","Text":"to help define the curvature of the loft."},{"Start":"10:32.050 ","End":"10:33.880","Text":"You’ll notice the second section"},{"Start":"10:33.940 ","End":"10:36.090","Text":"of the “Loft” dialog box is for"},{"Start":"10:36.090 ","End":"10:37.950","Text":"the selection of guide rails."},{"Start":"10:39.190 ","End":"10:41.370","Text":"For now, I’ll simply hit the “cancel”"},{"Start":"10:41.370 ","End":"10:43.820","Text":"button to undo the loft command."},{"Start":"10:45.420 ","End":"10:47.060","Text":"Let’s sketch out some guide rails,"},{"Start":"10:47.100 ","End":"10:49.050","Text":"and then we’ll reactivate the loft"},{"Start":"10:49.050 ","End":"10:50.979","Text":"command to finish off the model."},{"Start":"10:51.950 ","End":"10:53.540","Text":"To create the guide rails I’m"},{"Start":"10:53.540 ","End":"10:55.463","Text":"going to use a combination of the"},{"Start":"10:55.463 ","End":"10:56.470","Text":"spline tool and the line tool."},{"Start":"10:58.960 ","End":"11:00.379","Text":"It’s important to note that you"},{"Start":"11:00.380 ","End":"11:02.319","Text":"can create guide rails with any"},{"Start":"11:02.320 ","End":"11:04.019","Text":"of the sketch geometry tools."},{"Start":"11:04.889 ","End":"11:06.790","Text":"However, I’m going to use the"},{"Start":"11:06.800 ","End":"11:08.770","Text":"spline tool as that will give me"},{"Start":"11:08.770 ","End":"11:11.040","Text":"the most amount of freedom to really"},{"Start":"11:11.040 ","End":"11:12.660","Text":"tweak the shape of the bottle."},{"Start":"11:13.930 ","End":"11:16.079","Text":"To make this guide rail work best, we’re"},{"Start":"11:16.090 ","End":"11:18.790","Text":"going to sketch it on the XZ origin plane,"},{"Start":"11:19.020 ","End":"11:20.739","Text":"directly in the middle of the bottle."},{"Start":"11:21.589 ","End":"11:23.019","Text":"One thing we’ll want to ensure with"},{"Start":"11:23.020 ","End":"11:25.069","Text":"the guide rail is that it snaps into"},{"Start":"11:25.140 ","End":"11:27.690","Text":"each of the four profiles, otherwise,"},{"Start":"11:27.710 ","End":"11:29.360","Text":"we’ll get a very common error with"},{"Start":"11:29.370 ","End":"11:31.850","Text":"the Loft command, that the guide rail"},{"Start":"11:31.910 ","End":"11:34.520","Text":"isn’t touching all the closed profiles."},{"Start":"11:36.699 ","End":"11:38.069","Text":"In order to ensure that our"},{"Start":"11:38.070 ","End":"11:39.979","Text":"guide rail does snap in at each"},{"Start":"11:39.980 ","End":"11:41.970","Text":"profile, I’m going to create some"},{"Start":"11:42.020 ","End":"11:44.880","Text":"construction lines on each profile."},{"Start":"11:45.970 ","End":"11:48.200","Text":"As you’re creating parametric models in"},{"Start":"11:48.210 ","End":"11:50.840","Text":"Fusion 360, you’ll often find yourself"},{"Start":"11:50.860 ","End":"11:53.770","Text":"adding geometry or features later on"},{"Start":"11:54.080 ","End":"11:56.199","Text":"that you didn’t initially plan on."},{"Start":"11:57.259 ","End":"11:59.349","Text":"Fortunately for us, this isn’t a"},{"Start":"11:59.350 ","End":"12:01.520","Text":"problem, as we can simply double-click"},{"Start":"12:01.540 ","End":"12:04.349","Text":"on features in the timeline to edit them."},{"Start":"12:05.970 ","End":"12:07.540","Text":"I’ll start off by double-clicking"},{"Start":"12:07.550 ","End":"12:09.490","Text":"on the first sketch in the timeline."},{"Start":"12:10.200 ","End":"12:12.220","Text":"Then, I’ll activate the line command"},{"Start":"12:12.230 ","End":"12:13.479","Text":"by selecting it from the toolbar."},{"Start":"12:15.299 ","End":"12:17.589","Text":"Next, before drawing a line out,"},{"Start":"12:17.660 ","End":"12:19.480","Text":"I’m going to select the construction"},{"Start":"12:19.480 ","End":"12:21.220","Text":"option in the sketch palette."},{"Start":"12:22.320 ","End":"12:24.270","Text":"The construction option will create"},{"Start":"12:24.290 ","End":"12:26.939","Text":"dashed sketch geometry, which means"},{"Start":"12:26.940 ","End":"12:29.100","Text":"the sketch geometry is intended"},{"Start":"12:29.370 ","End":"12:31.570","Text":"solely for reference purposes."},{"Start":"12:32.809 ","End":"12:34.730","Text":"Next, I’ll click on the right side"},{"Start":"12:34.740 ","End":"12:36.469","Text":"of the profile, where the line"},{"Start":"12:36.490 ","End":"12:38.630","Text":"snaps into place at its midpoint."},{"Start":"12:39.730 ","End":"12:41.880","Text":"To ensure the line is exactly at the"},{"Start":"12:41.880 ","End":"12:43.850","Text":"midpoint, you’ll want to click where the"},{"Start":"12:43.870 ","End":"12:47.220","Text":"triangle midpoint constraint icon appears."},{"Start":"12:48.420 ","End":"12:49.980","Text":"Then, I’ll select the other"},{"Start":"12:49.980 ","End":"12:51.579","Text":"side of the rectangle, where it"},{"Start":"12:51.610 ","End":"12:53.519","Text":"also snaps into the midpoint."},{"Start":"12:54.779 ","End":"12:56.860","Text":"We’re now done with this one, so we can"},{"Start":"12:56.860 ","End":"13:00.140","Text":"hit the stop sketch button in the toolbar."},{"Start":"13:00.140 ","End":"13:02.110","Text":"At this point, we’ll want to do the same"},{"Start":"13:02.110 ","End":"13:04.650","Text":"steps to the next three sketch profiles."},{"Start":"13:06.110 ","End":"13:07.120","Text":"I’ll double-click on the"},{"Start":"13:07.120 ","End":"13:08.869","Text":"second sketch in the timeline."},{"Start":"13:09.559 ","End":"13:11.259","Text":"This time I’ll activate the line"},{"Start":"13:11.260 ","End":"13:12.650","Text":"command by hitting the keyboard"},{"Start":"13:12.660 ","End":"13:14.680","Text":"shortcut letter “L,” as in Lima."},{"Start":"13:15.570 ","End":"13:17.250","Text":"Then, I’ll turn the construction"},{"Start":"13:17.250 ","End":"13:18.660","Text":"option on by selecting the"},{"Start":"13:18.660 ","End":"13:20.420","Text":"button in the sketch palette."},{"Start":"13:21.230 ","End":"13:22.990","Text":"Once again, I’ll click on the edge"},{"Start":"13:22.990 ","End":"13:24.590","Text":"of the rectangle where the line"},{"Start":"13:24.610 ","End":"13:26.660","Text":"snaps into place at the midpoint."},{"Start":"13:27.400 ","End":"13:29.670","Text":"Then, I’ll click on the opposite"},{"Start":"13:29.670 ","End":"13:31.180","Text":"side where the line snaps"},{"Start":"13:31.180 ","End":"13:32.870","Text":"into place at its midpoint."},{"Start":"13:34.100 ","End":"13:36.060","Text":"I’ll stop the sketch by selecting the"},{"Start":"13:36.070 ","End":"13:37.480","Text":"stop sketch button in the toolbar."},{"Start":"13:38.820 ","End":"13:40.360","Text":"Then, I’ll double click on the"},{"Start":"13:40.370 ","End":"13:42.330","Text":"third sketch in the timeline below."},{"Start":"13:43.410 ","End":"13:45.689","Text":"First, I’ll click and drag on the circle’s"},{"Start":"13:45.690 ","End":"13:47.649","Text":"dimension to move it out of the way."},{"Start":"13:48.539 ","End":"13:49.709","Text":"I’ll then hit the keyboard"},{"Start":"13:49.710 ","End":"13:51.790","Text":"shortcut letter “L,” as in Lima."},{"Start":"13:52.960 ","End":"13:55.520","Text":"Then, I’ll also hit the keyboard shortcut"},{"Start":"13:55.550 ","End":"13:58.450","Text":"letter “X,” as in Xavier, to quickly"},{"Start":"13:58.450 ","End":"14:00.290","Text":"activate the construction option."},{"Start":"14:01.540 ","End":"14:03.590","Text":"For this line, we can’t snap"},{"Start":"14:03.590 ","End":"14:05.090","Text":"it into a midpoint, since"},{"Start":"14:05.090 ","End":"14:06.780","Text":"our circle doesn’t have one."},{"Start":"14:07.580 ","End":"14:09.200","Text":"However, we can use the"},{"Start":"14:09.200 ","End":"14:10.790","Text":"center point of the circle."},{"Start":"14:11.590 ","End":"14:13.840","Text":"I’ll click on the center of the circle and"},{"Start":"14:13.840 ","End":"14:16.050","Text":"then I’ll click on the left edge of the"},{"Start":"14:16.050 ","End":"14:18.449","Text":"circle where the line snaps into place."},{"Start":"14:19.360 ","End":"14:20.950","Text":"I’m also not going to worry about"},{"Start":"14:20.950 ","End":"14:22.770","Text":"the right side of the circle, as"},{"Start":"14:22.770 ","End":"14:24.139","Text":"we’re going to eventually mirror"},{"Start":"14:24.139 ","End":"14:25.900","Text":"the guide path after we create"},{"Start":"14:25.900 ","End":"14:27.970","Text":"it on the left side of the model."},{"Start":"14:28.950 ","End":"14:30.490","Text":"For now, I’ll hit the “stop"},{"Start":"14:30.490 ","End":"14:31.540","Text":"sketch” button in the toolbar."},{"Start":"14:33.020 ","End":"14:35.119","Text":"Last but not least, I’ll double-click on"},{"Start":"14:35.120 ","End":"14:37.360","Text":"the fourth sketch in the timeline below."},{"Start":"14:38.309 ","End":"14:40.040","Text":"I’m going to click and drag on the"},{"Start":"14:40.040 ","End":"14:41.470","Text":"dimension, to move this out of the"},{"Start":"14:41.470 ","End":"14:43.470","Text":"way so we can see what we’re doing."},{"Start":"14:44.500 ","End":"14:45.810","Text":"I’ll hit the keyboard shortcut"},{"Start":"14:45.810 ","End":"14:47.210","Text":"letter “L,” as in Lima."},{"Start":"14:47.560 ","End":"14:49.710","Text":"Then, I’ll also hit the keyboard shortcut"},{"Start":"14:49.710 ","End":"14:52.150","Text":"letter “X,” as in Xavier, to quickly"},{"Start":"14:52.150 ","End":"14:54.030","Text":"activate the construction option."},{"Start":"14:56.219 ","End":"14:57.960","Text":"I’ll click on the center of the circle"},{"Start":"14:58.070 ","End":"15:00.150","Text":"and then the left edge of the circle,"},{"Start":"15:00.199 ","End":"15:01.870","Text":"where the line snaps into place."},{"Start":"15:02.990 ","End":"15:04.290","Text":"Then, I’ll hit the stop"},{"Start":"15:04.300 ","End":"15:06.010","Text":"sketch button in the toolbar."},{"Start":"15:07.400 ","End":"15:09.760","Text":"If I now hover my mouse cursor over the"},{"Start":"15:09.840 ","End":"15:11.960","Text":"edge of these sketch profiles...you’ll"},{"Start":"15:11.960 ","End":"15:13.880","Text":"see a sketch point appears where"},{"Start":"15:13.880 ","End":"15:14.930","Text":"the construction lines intersect"},{"Start":"15:16.010 ","End":"15:18.510","Text":"the edge of the sketch profiles."},{"Start":"15:19.860 ","End":"15:21.359","Text":"This is why we created these"},{"Start":"15:21.360 ","End":"15:23.160","Text":"construction lines...and you’ll see"},{"Start":"15:23.160 ","End":"15:25.220","Text":"how they’ll help in just a second."},{"Start":"15:26.360 ","End":"15:28.119","Text":"At this point, I’ll activate the"},{"Start":"15:28.139 ","End":"15:29.900","Text":"“Fit Point Spline” tool from the"},{"Start":"15:29.910 ","End":"15:32.099","Text":"sketch dropdown list, and it’s"},{"Start":"15:32.110 ","End":"15:34.770","Text":"located in the spline flyout folder."},{"Start":"15:36.340 ","End":"15:37.540","Text":"After activating the spline"},{"Start":"15:37.900 ","End":"15:40.500","Text":"tool, I’ll click on the XY origin"},{"Start":"15:40.500 ","End":"15:42.910","Text":"plane, as the plane to sketch on."},{"Start":"15:44.080 ","End":"15:45.990","Text":"Then, I’ll click on the first closed"},{"Start":"15:46.000 ","End":"15:47.830","Text":"profile in the lower left-hand"},{"Start":"15:47.830 ","End":"15:50.100","Text":"corner, where it snaps into place."},{"Start":"15:51.120 ","End":"15:52.759","Text":"Next, I’ll click on the second"},{"Start":"15:52.760 ","End":"15:54.879","Text":"profile edge, where the line snaps"},{"Start":"15:54.880 ","End":"15:56.880","Text":"into place...and if you’re having"},{"Start":"15:56.880 ","End":"15:58.720","Text":"trouble seeing where you’re clicking"},{"Start":"15:58.980 ","End":"16:00.560","Text":"you can always look at the model"},{"Start":"16:00.570 ","End":"16:02.900","Text":"from a slight angle to ensure you’re"},{"Start":"16:02.900 ","End":"16:05.350","Text":"selecting the edge of the profile."},{"Start":"16:06.790 ","End":"16:09.389","Text":"After clicking on the third profile, I’ll"},{"Start":"16:09.389 ","End":"16:13.289","Text":"click the enter key to place the spline."},{"Start":"16:13.289 ","End":"16:15.480","Text":"At this point, we can further define"},{"Start":"16:15.480 ","End":"16:17.449","Text":"the shape of the whiskey bottle by"},{"Start":"16:17.450 ","End":"16:19.460","Text":"moving around the spline handles."},{"Start":"16:20.040 ","End":"16:21.949","Text":"I’ll simply click on the spline handle"},{"Start":"16:22.099 ","End":"16:24.310","Text":"and I’ll drag it around...and I’m just"},{"Start":"16:24.340 ","End":"16:26.980","Text":"going to tweak the spline handle until"},{"Start":"16:26.980 ","End":"16:29.030","Text":"I’m happy with the overall shape."},{"Start":"16:29.030 ","End":"16:36.860","Text":"Once I’ve got the spline in a shape that I"},{"Start":"16:36.860 ","End":"16:39.350","Text":"like, I’ll need to draw a straight line at"},{"Start":"16:39.350 ","End":"16:41.730","Text":"the top to create the stem of the bottle."},{"Start":"16:42.440 ","End":"16:43.590","Text":"I’m going to hit the keyboard"},{"Start":"16:43.590 ","End":"16:45.160","Text":"shortcut letter “L,” as in"},{"Start":"16:45.160 ","End":"16:47.390","Text":"Lima, to activate the line tool."},{"Start":"16:48.660 ","End":"16:50.569","Text":"I’ll select the first circle, where the"},{"Start":"16:50.570 ","End":"16:53.330","Text":"line snaps into place...and for the second"},{"Start":"16:53.370 ","End":"16:55.970","Text":"endpoint of the line, I’ll select the top"},{"Start":"16:55.970 ","End":"16:58.749","Text":"circle, where the line snaps into place."},{"Start":"16:59.670 ","End":"17:01.020","Text":"Then, I’ll hit the escape"},{"Start":"17:01.020 ","End":"17:03.130","Text":"key to exit the line command."},{"Start":"17:04.219 ","End":"17:06.449","Text":"Now, this is probably the most important"},{"Start":"17:06.459 ","End":"17:09.020","Text":"step of the guide path, and where a lot"},{"Start":"17:09.020 ","End":"17:11.170","Text":"of viewers had problems with the initial"},{"Start":"17:11.170 ","End":"17:14.740","Text":"tutorial...so pay close attention."},{"Start":"17:16.210 ","End":"17:18.369","Text":"Because we have a spline and a"},{"Start":"17:18.389 ","End":"17:20.640","Text":"line as our guide path, we’ll need"},{"Start":"17:20.640 ","End":"17:22.179","Text":"to make sure they’re connected."},{"Start":"17:22.849 ","End":"17:25.000","Text":"Otherwise, the loft tool will not"},{"Start":"17:25.020 ","End":"17:26.850","Text":"think they’re one continuous line,"},{"Start":"17:27.220 ","End":"17:29.240","Text":"and it will give us an error message"},{"Start":"17:29.250 ","End":"17:31.790","Text":"that the guide path is not continuous."},{"Start":"17:33.469 ","End":"17:35.730","Text":"First, I’m going to select the spline,"},{"Start":"17:35.780 ","End":"17:37.469","Text":"which shows the spline points again."},{"Start":"17:39.670 ","End":"17:41.570","Text":"Then, I’m going to click on the top"},{"Start":"17:41.580 ","End":"17:43.710","Text":"spline point handle...and I’m going"},{"Start":"17:43.710 ","End":"17:46.260","Text":"to drag that over until it snaps"},{"Start":"17:46.260 ","End":"17:48.260","Text":"into place to the straight line."},{"Start":"17:49.430 ","End":"17:52.680","Text":"Again, this is super important...your"},{"Start":"17:52.690 ","End":"17:55.690","Text":"line MUST be snapped into place."},{"Start":"17:57.530 ","End":"17:59.030","Text":"If your line is snapped into place"},{"Start":"17:59.030 ","End":"18:01.270","Text":"correctly, you should be able to drag"},{"Start":"18:01.270 ","End":"18:03.810","Text":"it up and down the line...and once"},{"Start":"18:03.810 ","End":"18:05.909","Text":"again you can move this around until"},{"Start":"18:05.910 ","End":"18:07.890","Text":"you’re happy with the overall shape."},{"Start":"18:09.530 ","End":"18:11.759","Text":"Once we’re happy with the overall shape of"},{"Start":"18:11.759 ","End":"18:13.659","Text":"the guide path, we’ll need to mirror the"},{"Start":"18:13.660 ","End":"18:16.179","Text":"guide path to the other side, so we can"},{"Start":"18:16.180 ","End":"18:18.610","Text":"use both guide paths with the loft tool."},{"Start":"18:19.960 ","End":"18:21.880","Text":"To do so, I’ll draw a line"},{"Start":"18:21.900 ","End":"18:23.220","Text":"to be used as our centerline."},{"Start":"18:24.740 ","End":"18:26.160","Text":"I’m going to activate the line"},{"Start":"18:26.160 ","End":"18:28.239","Text":"tool in the toolbar, and then I’ll"},{"Start":"18:28.240 ","End":"18:30.030","Text":"activate the construction option."},{"Start":"18:31.620 ","End":"18:33.410","Text":"I’m going to click at the bottom of"},{"Start":"18:33.410 ","End":"18:35.435","Text":"the bottle for the first point and then"},{"Start":"18:35.435 ","End":"18:37.210","Text":"I’ll click at the top of the bottle."},{"Start":"18:40.060 ","End":"18:41.590","Text":"Next, I’ll activate the mirror"},{"Start":"18:41.590 ","End":"18:43.970","Text":"command from the sketch dropdown list."},{"Start":"18:45.050 ","End":"18:47.660","Text":"Then, I’ll select the spline and the"},{"Start":"18:47.670 ","End":"18:49.960","Text":"straight line as the objects to mirror."},{"Start":"18:50.870 ","End":"18:51.970","Text":"Next, we’ll have to"},{"Start":"18:51.970 ","End":"18:53.290","Text":"select the mirror line."},{"Start":"18:53.990 ","End":"18:55.420","Text":"We created our construction"},{"Start":"18:55.420 ","End":"18:57.240","Text":"line as the mirror line...so"},{"Start":"18:57.240 ","End":"18:59.020","Text":"I’ll go ahead and select that."},{"Start":"18:59.990 ","End":"19:01.990","Text":"Then, I’ll click the “OK” button"},{"Start":"19:02.000 ","End":"19:03.820","Text":"to confirm the mirrored results."},{"Start":"19:05.300 ","End":"19:07.829","Text":"We’re now ready to retry the loft command."},{"Start":"19:08.099 ","End":"19:09.659","Text":"I’ll head to the create dropdown"},{"Start":"19:09.670 ","End":"19:11.160","Text":"list and then I’ll select the"},{"Start":"19:11.160 ","End":"19:12.940","Text":"“Loft” command to activate it."},{"Start":"19:13.860 ","End":"19:15.320","Text":"I’ll select the home position"},{"Start":"19:15.320 ","End":"19:16.754","Text":"icon, to take a look at the"},{"Start":"19:16.830 ","End":"19:18.659","Text":"model from a perspective."},{"Start":"19:19.840 ","End":"19:22.240","Text":"Then, I’m going to once again select all"},{"Start":"19:22.240 ","End":"19:24.749","Text":"four profiles from the bottom to the top."},{"Start":"19:29.590 ","End":"19:30.570","Text":"We can now select the"},{"Start":"19:30.580 ","End":"19:32.110","Text":"guide rails that we set up."},{"Start":"19:32.540 ","End":"19:33.700","Text":"I’ll first click on the plus"},{"Start":"19:33.710 ","End":"19:35.560","Text":"symbol in the guide rail box."},{"Start":"19:36.440 ","End":"19:38.100","Text":"Then, I’ll select the guide rail on"},{"Start":"19:38.100 ","End":"19:42.210","Text":"the left-hand side...and I’ll select"},{"Start":"19:42.210 ","End":"19:44.260","Text":"the guide-rail on the right-hand side."},{"Start":"19:45.570 ","End":"19:47.749","Text":"If I now move the model around you’ll"},{"Start":"19:47.750 ","End":"19:49.990","Text":"see we have a much more defined shape."},{"Start":"19:51.030 ","End":"19:53.040","Text":"Everything looks correct so I’ll click the"},{"Start":"19:53.040 ","End":"19:55.620","Text":"“OK” button to confirm the loft results."},{"Start":"19:57.040 ","End":"19:58.850","Text":"At this point, we’ll finish off the"},{"Start":"19:58.850 ","End":"20:01.169","Text":"bottle by adding a few more details"},{"Start":"20:01.210 ","End":"20:03.219","Text":"before making the bottle hollow."},{"Start":"20:04.230 ","End":"20:05.939","Text":"If we look at our shape we’ll see that"},{"Start":"20:05.940 ","End":"20:08.230","Text":"the bottom of the bottle is completely"},{"Start":"20:08.230 ","End":"20:10.310","Text":"flat, which isn’t very realistic."},{"Start":"20:10.880 ","End":"20:12.050","Text":"I’m going to hit the keyboard"},{"Start":"20:12.050 ","End":"20:14.470","Text":"shortcut letter “F,” as in Foxtrot,"},{"Start":"20:14.490 ","End":"20:16.670","Text":"to activate the model fillet command."},{"Start":"20:18.059 ","End":"20:20.149","Text":"With the model fillet command active,"},{"Start":"20:20.200 ","End":"20:21.920","Text":"I’ll select the bottom of the bottle."},{"Start":"20:22.709 ","End":"20:26.040","Text":"Then, I’ll add a fillet of 5mm, which"},{"Start":"20:26.060 ","End":"20:28.690","Text":"adds a nice rounded corner to the bottom."},{"Start":"20:29.530 ","End":"20:31.860","Text":"Then, I’ll click the “OK” button"},{"Start":"20:31.900 ","End":"20:33.960","Text":"to confirm the fillet results."},{"Start":"20:35.759 ","End":"20:37.740","Text":"Let’s now create a stem at the"},{"Start":"20:37.759 ","End":"20:40.030","Text":"top where we can add a thread."},{"Start":"20:40.469 ","End":"20:41.769","Text":"I’ll hit the keyboard shortcut"},{"Start":"20:41.770 ","End":"20:43.600","Text":"letter “C,” as in Charlie to"},{"Start":"20:43.600 ","End":"20:45.580","Text":"activate the center-circle command."},{"Start":"20:46.560 ","End":"20:48.370","Text":"Then, I’ll click on the top surface"},{"Start":"20:48.370 ","End":"20:50.200","Text":"of the bottle as the sketch plane."},{"Start":"20:50.809 ","End":"20:52.200","Text":"I’m going to click on the center"},{"Start":"20:52.200 ","End":"20:54.589","Text":"origin and drag it out with my mouse."},{"Start":"20:55.679 ","End":"20:57.550","Text":"For this circle\u0027s dimension, I’ll"},{"Start":"20:57.550 ","End":"21:00.750","Text":"make the diameter 27mm, and I\u0027ll"},{"Start":"21:00.799 ","End":"21:02.760","Text":"click to set the circle in place."},{"Start":"21:04.030 ","End":"21:05.340","Text":"Then, I’m going to hit the"},{"Start":"21:05.340 ","End":"21:07.070","Text":"keyboard shortcut letter “E” to"},{"Start":"21:07.070 ","End":"21:08.659","Text":"activate the extrude command."},{"Start":"21:09.849 ","End":"21:11.270","Text":"I’ll select the circle as"},{"Start":"21:11.270 ","End":"21:12.839","Text":"the profile to extrude."},{"Start":"21:13.540 ","End":"21:16.440","Text":"I’m going to type out 12mm for the extrude"},{"Start":"21:16.449 ","End":"21:19.170","Text":"distance...and before clicking the “OK”"},{"Start":"21:19.170 ","End":"21:21.900","Text":"button I’ll make sure the operation is"},{"Start":"21:21.900 ","End":"21:25.250","Text":"set to “join.” By setting the operation"},{"Start":"21:25.250 ","End":"21:27.930","Text":"to join, this extrude feature will"},{"Start":"21:27.930 ","End":"21:31.000","Text":"join the bottle body below it, which"},{"Start":"21:31.000 ","End":"21:34.210","Text":"is crucial as we need to have one body"},{"Start":"21:34.420 ","End":"21:54.920","Text":"as we go to use the shell command."},{"Start":"21:54.930 ","End":"21:58.063","Text":"Lastly, I’m going to add one more fillet"},{"Start":"21:58.270 ","End":"22:00.490","Text":"to the top edge, so this isn’t sharp."},{"Start":"22:01.250 ","End":"22:02.655","Text":"I’ll activate the model fillet"},{"Start":"22:02.820 ","End":"22:04.329","Text":"command with the keyboard shortcut"},{"Start":"22:04.330 ","End":"22:06.080","Text":"letter “F,” as in Foxtrot."},{"Start":"22:06.840 ","End":"22:09.309","Text":"Then, I’m going to select the top edge."},{"Start":"22:09.880 ","End":"22:12.100","Text":"I’ll make the fillet radius 2mm,"},{"Start":"22:12.119 ","End":"22:13.770","Text":"followed by clicking the “OK” button."},{"Start":"22:13.770 ","End":"22:13.891","Text":"I’ll now make the bottle hollow"},{"Start":"22:13.891 ","End":"22:13.992","Text":"by activating the shell feature"},{"Start":"22:13.992 ","End":"22:14.093","Text":"from the “Modify” dropdown list."},{"Start":"22:14.093 ","End":"22:14.214","Text":"Then, I’ll select the top of"},{"Start":"22:14.214 ","End":"22:14.356","Text":"the bottle and type out 3mm to"},{"Start":"22:14.356 ","End":"22:14.477","Text":"create the thickness of the glass."},{"Start":"22:14.477 ","End":"22:14.619","Text":"Then, I’ll click “OK” to confirm the"},{"Start":"22:14.619 ","End":"22:16.420","Text":"shell command and now we’ll add a thread"},{"Start":"22:16.430 ","End":"22:18.850","Text":"to the top of the bottle, so our whiskey"},{"Start":"22:18.850 ","End":"22:21.000","Text":"bottle can be sealed off with a cap."},{"Start":"22:22.820 ","End":"22:24.190","Text":"To create the thread I’ll"},{"Start":"22:24.190 ","End":"22:25.499","Text":"select the “thread” command"},{"Start":"22:25.520 ","End":"22:27.390","Text":"from the create dropdown menu."},{"Start":"22:28.449 ","End":"22:30.499","Text":"Then, I’ll click on the surface of the"},{"Start":"22:30.510 ","End":"22:32.940","Text":"cylinder shape at the top of the bottle."},{"Start":"22:34.220 ","End":"22:36.290","Text":"In the thread dialogue box, I’ll"},{"Start":"22:36.290 ","End":"22:38.040","Text":"first want to click the “modeled”"},{"Start":"22:38.059 ","End":"22:39.750","Text":"option, which will make sure it"},{"Start":"22:39.760 ","End":"22:42.159","Text":"actually 3D models the thread shape."},{"Start":"22:43.200 ","End":"22:44.090","Text":"Otherwise..."},{"Start":"22:44.160 ","End":"22:46.260","Text":"it would simply just give a graphical"},{"Start":"22:46.289 ","End":"22:48.540","Text":"appearance of a thread, so if we"},{"Start":"22:48.540 ","End":"22:50.420","Text":"didn’t click “modeled” and we went to"},{"Start":"22:50.700 ","End":"22:53.729","Text":"3d print or export this file, then a"},{"Start":"22:53.760 ","End":"22:56.440","Text":"thread wouldn’t actually be exported."},{"Start":"22:57.700 ","End":"22:59.679","Text":"The second option in our thread"},{"Start":"22:59.679 ","End":"23:01.420","Text":"dialog box is the length."},{"Start":"23:02.130 ","End":"23:04.359","Text":"So it defaulted to be full length, but"},{"Start":"23:04.359 ","End":"23:06.680","Text":"if I uncheck this I can make it slightly"},{"Start":"23:06.680 ","End":"23:09.760","Text":"shorter by dragging the arrow up or"},{"Start":"23:09.760 ","End":"23:12.120","Text":"by changing the length input field."},{"Start":"23:13.660 ","End":"23:15.509","Text":"Lastly, if we take a look at"},{"Start":"23:15.510 ","End":"23:17.190","Text":"the rest of the options here..."},{"Start":"23:17.490 ","End":"23:19.060","Text":"they are standards for different"},{"Start":"23:19.070 ","End":"23:21.210","Text":"types of threads, whether it be for"},{"Start":"23:21.210 ","End":"23:24.810","Text":"bottles, screws, machinery, and so on."},{"Start":"23:25.460 ","End":"23:27.310","Text":"So for the purpose of this beginner"},{"Start":"23:27.310 ","End":"23:29.210","Text":"demo, I’m simply going to leave it"},{"Start":"23:29.230 ","End":"23:31.340","Text":"at the defaults and I’ll click the"},{"Start":"23:31.340 ","End":"23:33.879","Text":"“OK” button to confirm the results."},{"Start":"23:35.230 ","End":"23:37.060","Text":"Last but not least, I’ll right-click"},{"Start":"23:37.060 ","End":"23:38.710","Text":"on the model and I’ll select the"},{"Start":"23:38.710 ","End":"23:40.619","Text":"“appearance” option from the list."},{"Start":"23:41.650 ","End":"23:43.410","Text":"I’ll simply search “glass”"},{"Start":"23:43.469 ","End":"23:44.560","Text":"in the search field."},{"Start":"23:47.680 ","End":"23:49.910","Text":"Then, I’ll drag the bronze glass"},{"Start":"23:49.910 ","End":"23:51.540","Text":"appearance on to the model."},{"Start":"23:53.719 ","End":"23:55.400","Text":"To take an even better look at the"},{"Start":"23:55.400 ","End":"23:57.280","Text":"bottle, I’ll change the environment"},{"Start":"23:57.339 ","End":"24:00.449","Text":"under the display settings, to “dark"},{"Start":"24:00.450 ","End":"24:02.600","Text":"sky” which will make the “see-through”"},{"Start":"24:02.600 ","End":"24:05.280","Text":"appearance of the glass easier to see."}],"ID":28987},{"Watched":false,"Name":"Day 5 - 3D Model an Ice Cube Tray","Duration":"10m 4s","ChapterTopicVideoID":27785,"CourseChapterTopicPlaylistID":275347,"HasSubtitles":true,"ThumbnailPath":null,"UploadDate":null,"DurationForVideoObject":null,"Description":null,"MetaTitle":null,"MetaDescription":null,"Canonical":null,"VideoComments":[],"Subtitles":[{"Start":"00:00.010 ","End":"00:00.640","Text":"Kevin Kennedy: Hey there, it’s"},{"Start":"00:00.640 ","End":"00:02.130","Text":"Kevin, and welcome to Day #5"},{"Start":"00:02.870 ","End":"00:05.689","Text":"of Learn Fusion 360 in 30 days."},{"Start":"00:06.130 ","End":"00:07.729","Text":"In this tutorial, I’ll show you"},{"Start":"00:07.730 ","End":"00:10.129","Text":"how to 3D model an Ice Cube Tray."},{"Start":"00:10.740 ","End":"00:12.026","Text":"You’ll learn how to: use the"},{"Start":"00:12.026 ","End":"00:15.110","Text":"sketch dimension, extrude cut, and"},{"Start":"00:15.110 ","End":"00:16.950","Text":"the rectangular pattern feature."},{"Start":"00:18.549 ","End":"00:19.840","Text":"To start off we’ll hit the"},{"Start":"00:19.840 ","End":"00:22.020","Text":"keyboard shortcut letter “R” to"},{"Start":"00:22.020 ","End":"00:24.180","Text":"activate the Rectangle and I’ll"},{"Start":"00:24.180 ","End":"00:26.480","Text":"go ahead and select the top plane."},{"Start":"00:27.179 ","End":"00:28.960","Text":"Now if we want to use the center"},{"Start":"00:28.960 ","End":"00:30.770","Text":"rectangle instead of the 2 point"},{"Start":"00:30.780 ","End":"00:32.860","Text":"rectangle then we can select it in"},{"Start":"00:32.860 ","End":"00:35.199","Text":"the “sketch palette” dialogue box"},{"Start":"00:35.230 ","End":"00:37.570","Text":"before we click on our origin point."},{"Start":"00:38.460 ","End":"00:40.519","Text":"So I’ll go ahead and click on the origin"},{"Start":"00:40.519 ","End":"00:42.920","Text":"point and drag my mouse out, and I’ll"},{"Start":"00:42.920 ","End":"00:46.129","Text":"type in 12” for the length, followed by"},{"Start":"00:46.130 ","End":"00:49.839","Text":"the tab key to lock it in place, and 4”"},{"Start":"00:49.860 ","End":"00:51.939","Text":"for the width, followed by the tab key."},{"Start":"00:52.809 ","End":"00:54.940","Text":"Then, I’ll go ahead and hit enter"},{"Start":"00:54.940 ","End":"00:56.800","Text":"to escape the rectangle command,"},{"Start":"00:56.840 ","End":"00:58.379","Text":"and I’ll toggle this dialogue"},{"Start":"00:58.390 ","End":"01:00.050","Text":"box so it’s out of the way."},{"Start":"01:01.560 ","End":"01:03.400","Text":"Next, we’re going to extrude"},{"Start":"01:03.400 ","End":"01:05.379","Text":"this rectangle up to create the"},{"Start":"01:05.379 ","End":"01:07.390","Text":"basic shape of our ice cube tray."},{"Start":"01:08.030 ","End":"01:10.400","Text":"I’ll hit the letter “E”, the keyboard"},{"Start":"01:10.400 ","End":"01:12.800","Text":"shortcut for Extrude, and I’ll drag the"},{"Start":"01:12.809 ","End":"01:16.560","Text":"arrow up OR type in 2” and then I’ll hit"},{"Start":"01:16.600 ","End":"01:18.786","Text":"“enter” to leave the extrude command."},{"Start":"01:18.790 ","End":"01:20.860","Text":"So now that we have the overall size of"},{"Start":"01:20.860 ","End":"01:22.829","Text":"our ice cube tray we’re going to draw"},{"Start":"01:22.870 ","End":"01:25.090","Text":"a rectangle on this top surface so we"},{"Start":"01:25.090 ","End":"01:27.310","Text":"can begin to cut out the ice cube shape."},{"Start":"01:28.730 ","End":"01:31.349","Text":"So I’ll activate the rectangle tool again"},{"Start":"01:31.359 ","End":"01:33.510","Text":"with the keyboard shortcut letter “R”"},{"Start":"01:33.650 ","End":"01:35.630","Text":"and I’ll click on the top surface here."},{"Start":"01:36.500 ","End":"01:39.080","Text":"Then, I’ll simply click and drag that"},{"Start":"01:39.080 ","End":"01:41.090","Text":"rectangle out...and I’m not really"},{"Start":"01:41.090 ","End":"01:42.460","Text":"worried about the position of the"},{"Start":"01:42.460 ","End":"01:44.100","Text":"rectangle at this point because we’ll"},{"Start":"01:44.100 ","End":"01:46.660","Text":"dimension that to the sides in just a bit."},{"Start":"01:47.869 ","End":"01:50.830","Text":"So I’ll type in 1.65” for the"},{"Start":"01:50.830 ","End":"01:53.300","Text":"height, hit the tab key to lock the"},{"Start":"01:53.300 ","End":"01:55.270","Text":"dimension in place, and I’ll type"},{"Start":"01:55.270 ","End":"01:57.960","Text":"in 1.2” for the width, followed"},{"Start":"01:57.960 ","End":"01:59.630","Text":"by the tab key and then the enter"},{"Start":"01:59.630 ","End":"02:01.650","Text":"key to exit the rectangle command."},{"Start":"02:03.179 ","End":"02:05.349","Text":"So we’ve added dimensions to a lot of"},{"Start":"02:05.350 ","End":"02:07.020","Text":"the lines that we’ve made in the first"},{"Start":"02:07.020 ","End":"02:08.880","Text":"few days of this series, but we can"},{"Start":"02:08.949 ","End":"02:11.890","Text":"also use dimensions to define distances"},{"Start":"02:11.890 ","End":"02:14.850","Text":"between other geometry and sketch objects."},{"Start":"02:15.630 ","End":"02:18.420","Text":"I’ll simply click letter “D,” the keyboard"},{"Start":"02:18.420 ","End":"02:20.769","Text":"shortcut for dimension and I’ll click on"},{"Start":"02:20.770 ","End":"02:23.429","Text":"this rectangle line and this outer line"},{"Start":"02:23.430 ","End":"02:25.579","Text":"here and I’ll drag the mouse over to"},{"Start":"02:25.580 ","End":"02:27.860","Text":"the left and click anywhere over here."},{"Start":"02:28.880 ","End":"02:31.799","Text":"Now I’ll type in .2” for the distance"},{"Start":"02:31.920 ","End":"02:34.359","Text":"and hit enter, and you’ll notice"},{"Start":"02:34.429 ","End":"02:36.600","Text":"that after I hit enter the rectangle"},{"Start":"02:36.600 ","End":"02:41.350","Text":"moved down to be exactly .2” away."},{"Start":"02:41.350 ","End":"02:42.180","Text":"Another way I can use the"},{"Start":"02:42.190 ","End":"02:44.100","Text":"dimension tool is by selecting"},{"Start":"02:44.100 ","End":"02:46.300","Text":"the lines or geometry first."},{"Start":"02:46.950 ","End":"02:48.559","Text":"So I’ll select the left line of"},{"Start":"02:48.560 ","End":"02:50.470","Text":"the rectangle, I’ll hold down the"},{"Start":"02:50.470 ","End":"02:52.250","Text":"shift key, and then I’ll select"},{"Start":"02:52.250 ","End":"02:54.060","Text":"the outer line of the box..."},{"Start":"02:54.490 ","End":"02:55.600","Text":"and then I’ll hit the"},{"Start":"02:55.600 ","End":"02:57.059","Text":"keyboard shortcut letter “D”."},{"Start":"02:58.279 ","End":"03:00.219","Text":"I’ll click anywhere to the left here"},{"Start":"03:00.219 ","End":"03:02.660","Text":"and then I’ll type in .2” for this"},{"Start":"03:02.690 ","End":"03:04.929","Text":"dimension as well… and I’ll hit the"},{"Start":"03:04.950 ","End":"03:06.740","Text":"“enter” key to close the command."},{"Start":"03:07.630 ","End":"03:09.619","Text":"At this point, we want to cut out this"},{"Start":"03:09.620 ","End":"03:11.849","Text":"chunk where the first ice cube will go,"},{"Start":"03:12.190 ","End":"03:14.459","Text":"so I’ll click the letter “E” for extrude."},{"Start":"03:15.049 ","End":"03:17.519","Text":"After activating extrude I’ll"},{"Start":"03:17.520 ","End":"03:19.609","Text":"click the rectangle..and now I"},{"Start":"03:19.610 ","End":"03:21.200","Text":"want you to watch what happens"},{"Start":"03:21.200 ","End":"03:23.210","Text":"here when I drag the arrow down."},{"Start":"03:23.760 ","End":"03:25.740","Text":"So if you look at the extrude dialogue"},{"Start":"03:25.750 ","End":"03:28.339","Text":"box you’ll see as I drag the arrow down"},{"Start":"03:28.400 ","End":"03:30.780","Text":"it changes the operation to “cut”..."},{"Start":"03:31.130 ","End":"03:32.620","Text":"so this will actually cut"},{"Start":"03:32.650 ","End":"03:34.090","Text":"away the material here."},{"Start":"03:34.529 ","End":"03:36.180","Text":"And we can either drag the arrow"},{"Start":"03:36.190 ","End":"03:38.420","Text":"down or we can always select"},{"Start":"03:38.470 ","End":"03:40.130","Text":"“cut” from this drop-down list."},{"Start":"03:40.680 ","End":"03:44.110","Text":"For the distance, I’ll type in -1.3”..."},{"Start":"03:44.620 ","End":"03:46.700","Text":"and note that you have to have a negative"},{"Start":"03:46.710 ","End":"03:49.260","Text":"value here if you want the object to cut."},{"Start":"03:50.000 ","End":"03:52.010","Text":"If I take the minus sign away"},{"Start":"03:52.070 ","End":"03:53.509","Text":"then it won’t cut the object"},{"Start":"03:53.559 ","End":"03:55.510","Text":"and it will add to the top."},{"Start":"03:56.380 ","End":"03:58.049","Text":"Now one other thing we want to"},{"Start":"03:58.050 ","End":"04:00.250","Text":"do is add a nice taper so the"},{"Start":"04:00.280 ","End":"04:02.269","Text":"ice cubes pop out of the tray."},{"Start":"04:03.300 ","End":"04:06.099","Text":"To do this I’ll simply type in -10"},{"Start":"04:06.099 ","End":"04:08.320","Text":"degrees for the taper angle and then I’ll"},{"Start":"04:08.320 ","End":"04:11.039","Text":"hit “okay” on the extrude dialogue box."},{"Start":"04:12.350 ","End":"04:13.995","Text":"Now we’ll want to add a nice fillet,"},{"Start":"04:14.240 ","End":"04:16.709","Text":"or rounded edge to this ice cube slot"},{"Start":"04:16.720 ","End":"04:19.140","Text":"before we pattern the rest of them."},{"Start":"04:19.740 ","End":"04:21.999","Text":"I’ll click “F” the keyboard shortcut for"},{"Start":"04:22.000 ","End":"04:25.179","Text":"the fillet modify command, and I’ll select"},{"Start":"04:25.240 ","End":"04:27.409","Text":"all of the lines that make up this cut."},{"Start":"04:31.049 ","End":"04:34.840","Text":"Then, I’ll punch in .13” for the radius."},{"Start":"04:37.370 ","End":"04:39.300","Text":"Now, we obviously want this same"},{"Start":"04:39.300 ","End":"04:41.150","Text":"cut to appear on the rest of the"},{"Start":"04:41.150 ","End":"04:43.010","Text":"tray here so we have a whole tray"},{"Start":"04:43.010 ","End":"04:45.010","Text":"of ice cubes and not just one…."},{"Start":"04:45.870 ","End":"04:48.500","Text":"So I’ll activate the “rectangular pattern”"},{"Start":"04:48.510 ","End":"04:51.120","Text":"from the create dropdown menu..and it will"},{"Start":"04:51.120 ","End":"04:53.719","Text":"be located under the pattern sub-folder."},{"Start":"04:55.490 ","End":"04:57.080","Text":"The first thing in the rectangular"},{"Start":"04:57.090 ","End":"05:00.109","Text":"pattern dialogue box is the pattern type."},{"Start":"05:00.500 ","End":"05:03.210","Text":"So if we left it on the default of faces"},{"Start":"05:03.210 ","End":"05:05.630","Text":"here we could select all of the faces of"},{"Start":"05:05.630 ","End":"05:08.750","Text":"our cut, but it would take a minute or so"},{"Start":"05:08.810 ","End":"05:10.979","Text":"and wouldn’t be the most efficient way."},{"Start":"05:12.099 ","End":"05:13.730","Text":"Instead, I’ll change this to"},{"Start":"05:13.730 ","End":"05:15.320","Text":"“features” and then I’ll simply"},{"Start":"05:15.320 ","End":"05:17.329","Text":"select the “extrude” and the “fillet”"},{"Start":"05:17.880 ","End":"05:20.020","Text":"from our Fusion 360 timeline."},{"Start":"05:21.089 ","End":"05:22.260","Text":"The next thing we need to"},{"Start":"05:22.260 ","End":"05:24.360","Text":"select is the direction."},{"Start":"05:24.950 ","End":"05:26.960","Text":"So we can simply activate it and"},{"Start":"05:26.960 ","End":"05:28.960","Text":"click on this “X” axis here…."},{"Start":"05:29.210 ","End":"05:31.820","Text":"And then we’ll type in 10.4” for the"},{"Start":"05:31.820 ","End":"05:34.510","Text":"distance and 8 for the number of times"},{"Start":"05:34.540 ","End":"05:36.559","Text":"that we want our cutout to be copied."},{"Start":"05:37.150 ","End":"05:39.579","Text":"Next, I’ll drag this arrow up and"},{"Start":"05:39.580 ","End":"05:41.490","Text":"I’ll type in 2 for the number of"},{"Start":"05:41.490 ","End":"05:45.510","Text":"copies and 1.95” for the distance."},{"Start":"05:52.000 ","End":"05:53.660","Text":"Now if you take a look at the pattern"},{"Start":"05:53.670 ","End":"05:55.639","Text":"dialogue box here you’ll notice that"},{"Start":"05:55.639 ","End":"05:57.460","Text":"we can change the direction type."},{"Start":"05:58.139 ","End":"06:00.269","Text":"So for our purposes since we drew the"},{"Start":"06:00.280 ","End":"06:02.990","Text":"first cube in the corner we really only"},{"Start":"06:02.990 ","End":"06:05.680","Text":"need to go one direction on the X-axis"},{"Start":"06:06.080 ","End":"06:09.270","Text":"and one direction on the Y-axis...but"},{"Start":"06:09.270 ","End":"06:11.230","Text":"for future projects, you can always"},{"Start":"06:11.230 ","End":"06:13.539","Text":"change this to “symmetric” which"},{"Start":"06:13.540 ","End":"06:15.749","Text":"will let you go in both directions."},{"Start":"06:16.639 ","End":"06:18.590","Text":"Now let’s hit okay to see the result."},{"Start":"06:19.260 ","End":"06:21.099","Text":"Alrighty… so if we look at this in the"},{"Start":"06:21.110 ","End":"06:23.060","Text":"home view we’ll see that it\u0027s coming"},{"Start":"06:23.060 ","End":"06:25.910","Text":"along nicely… but it\u0027s pretty boxy."},{"Start":"06:26.790 ","End":"06:29.200","Text":"So let’s hit “S,” the keyboard shortcut"},{"Start":"06:29.210 ","End":"06:31.560","Text":"that allows us to type in commands, and"},{"Start":"06:31.560 ","End":"06:33.919","Text":"we’ll type in “Shell” and hit enter."},{"Start":"06:35.570 ","End":"06:37.930","Text":"Now in the day #4 for the whiskey bottle,"},{"Start":"06:37.940 ","End":"06:41.010","Text":"we just selected one surface to shell our"},{"Start":"06:41.010 ","End":"06:43.820","Text":"shape, but for this more complex shape,"},{"Start":"06:43.840 ","End":"06:46.919","Text":"we’ll have to select all four sides and"},{"Start":"06:46.929 ","End":"06:49.800","Text":"as well as the bottom face of our box."},{"Start":"06:51.250 ","End":"06:54.219","Text":"I’ll punch in .07” for the inside"},{"Start":"06:54.240 ","End":"06:55.990","Text":"thickness and click okay to"},{"Start":"06:55.990 ","End":"06:57.940","Text":"escape the shell command and take"},{"Start":"06:57.940 ","End":"06:59.660","Text":"a look at what the results are."},{"Start":"07:01.630 ","End":"07:03.570","Text":"Now I want the cutout to be a"},{"Start":"07:03.570 ","End":"07:05.670","Text":"little bit more rounded so I’ll"},{"Start":"07:05.670 ","End":"07:06.735","Text":"double-click on the fillet command"},{"Start":"07:06.735 ","End":"07:11.600","Text":"in our timeline and change this 1.7”"},{"Start":"07:11.600 ","End":"07:18.180","Text":"Now the last thing we’ll do here is add"},{"Start":"07:18.180 ","End":"07:20.710","Text":"an edge running around the outer surface."},{"Start":"07:21.179 ","End":"07:22.950","Text":"First, we’ll need to add a fillet to"},{"Start":"07:22.950 ","End":"07:24.829","Text":"our edges… so I’ll click the letter"},{"Start":"07:24.860 ","End":"07:27.979","Text":"“F” and I’ll select all four corners."},{"Start":"07:30.270 ","End":"07:33.750","Text":"Then, I’ll punch in .4” and click okay."},{"Start":"07:36.460 ","End":"07:37.880","Text":"Now we’re going to have to create"},{"Start":"07:37.920 ","End":"07:39.889","Text":"a sketch on our center plane."},{"Start":"07:39.910 ","End":"07:41.710","Text":"So I’ll click create sketch"},{"Start":"07:46.170 ","End":"07:48.139","Text":"and then select the XY plane."},{"Start":"07:50.289 ","End":"07:52.900","Text":"Then, I’ll use this “zoom window” feature"},{"Start":"07:52.930 ","End":"07:55.520","Text":"in the display settings and I’ll drag over"},{"Start":"07:55.520 ","End":"07:57.800","Text":"the top left corner of the ice cube tray."},{"Start":"07:58.849 ","End":"08:01.070","Text":"This feature is a great way to quickly"},{"Start":"08:01.070 ","End":"08:03.909","Text":"zoom in on a specific area of your model."},{"Start":"08:05.930 ","End":"08:08.340","Text":"I’ll hit “L” for line and I’ll just draw"},{"Start":"08:08.390 ","End":"08:12.190","Text":"a parallel line down .25” and another line"},{"Start":"08:12.200 ","End":"08:16.920","Text":"I’ll go over .25.” I’ll hit “L” again and"},{"Start":"08:16.920 ","End":"08:22.150","Text":"I’ll go up .07” and I’ll go .07” from the"},{"Start":"08:22.150 ","End":"08:27.930","Text":"top, and then I’ll draw two lines here"},{"Start":"08:27.980 ","End":"08:30.929","Text":"to connect this backward “L” shape… and"},{"Start":"08:30.930 ","End":"08:32.880","Text":"you’ll notice if I hover the mouse around"},{"Start":"08:32.880 ","End":"08:35.240","Text":"some of the other lines it will give me"},{"Start":"08:35.240 ","End":"08:37.450","Text":"these helpful dashed reference lines."},{"Start":"08:38.570 ","End":"08:40.549","Text":"Now I’ll grab the sketch fillet command"},{"Start":"08:40.659 ","End":"08:43.170","Text":"and I’ll add a fillet of .1” to the"},{"Start":"08:43.170 ","End":"08:48.920","Text":"bottom corner, and I’ll select fillet"},{"Start":"08:48.920 ","End":"08:51.110","Text":"again by right-clicking and hitting"},{"Start":"08:51.110 ","End":"08:54.810","Text":"“repeat fillet command” and I’ll click the"},{"Start":"08:54.849 ","End":"08:57.200","Text":"inside corner here and make this one .05”"},{"Start":"08:59.940 ","End":"09:01.660","Text":"Then we’ll stop the sketch and"},{"Start":"09:01.660 ","End":"09:03.560","Text":"we’ll activate the sweep command."},{"Start":"09:06.970 ","End":"09:09.370","Text":"I’ll select the profile or the shape that"},{"Start":"09:09.370 ","End":"09:11.640","Text":"we just created, and I’ll select the upper"},{"Start":"09:11.640 ","End":"09:13.980","Text":"line of the ice cube tray as the path."},{"Start":"09:14.690 ","End":"09:16.819","Text":"Lastly, I’ll change the operation to"},{"Start":"09:16.820 ","End":"09:20.160","Text":"“join,” to make sure it joins to the rest"},{"Start":"09:20.160 ","End":"09:22.620","Text":"of our object, and I’ll click “okay.”"},{"Start":"09:23.470 ","End":"09:25.260","Text":"Now if we take a look at our tray we"},{"Start":"09:25.260 ","End":"09:27.549","Text":"have a nice and simple ice cube tray."},{"Start":"09:28.120 ","End":"09:29.770","Text":"I didn’t want this beginner lesson to"},{"Start":"09:29.770 ","End":"09:32.640","Text":"go to long or get too complicated, but"},{"Start":"09:32.640 ","End":"09:34.229","Text":"if you want to play around with this"},{"Start":"09:34.270 ","End":"09:36.390","Text":"or create another one you can take"},{"Start":"09:36.390 ","End":"09:38.430","Text":"it a step further by curving the ice"},{"Start":"09:38.430 ","End":"09:41.070","Text":"cube shape, and you could cut out some"},{"Start":"09:41.070 ","End":"09:43.750","Text":"indents here so the tray is stackable."},{"Start":"09:44.420 ","End":"09:46.280","Text":"We can also right-click and throw on"},{"Start":"09:46.280 ","End":"09:53.800","Text":"a quick plastic appearance… and maybe"},{"Start":"09:53.809 ","End":"09:56.750","Text":"I’ll change the color to a light blue."}],"ID":28988},{"Watched":false,"Name":"Day 6 - 3D Model a Hex Nut","Duration":"6m 57s","ChapterTopicVideoID":27786,"CourseChapterTopicPlaylistID":275347,"HasSubtitles":true,"ThumbnailPath":null,"UploadDate":null,"DurationForVideoObject":null,"Description":null,"MetaTitle":null,"MetaDescription":null,"Canonical":null,"VideoComments":[],"Subtitles":[{"Start":"00:00.110 ","End":"00:00.870","Text":"Kevin Kennedy: Hey there, it’s"},{"Start":"00:00.870 ","End":"00:03.240","Text":"Kevin, and welcome to Day #6"},{"Start":"00:03.270 ","End":"00:05.800","Text":"of Learn Fusion 360 in 30 days."},{"Start":"00:06.280 ","End":"00:07.680","Text":"In this tutorial, I’ll show"},{"Start":"00:07.680 ","End":"00:09.690","Text":"you how to 3D model a hex nut."},{"Start":"00:10.610 ","End":"00:12.440","Text":"You’ll learn how to: use the polygon"},{"Start":"00:12.440 ","End":"00:15.750","Text":"sketch tool, create a midplane, use the"},{"Start":"00:15.750 ","End":"00:18.380","Text":"mirror feature, and use the hole feature."},{"Start":"00:19.070 ","End":"00:20.810","Text":"Before we get started let’s make"},{"Start":"00:20.810 ","End":"00:22.350","Text":"sure that our document settings"},{"Start":"00:22.360 ","End":"00:24.500","Text":"has the units set to millimeters."},{"Start":"00:28.929 ","End":"00:30.789","Text":"Then, let’s start creating our"},{"Start":"00:30.790 ","End":"00:33.120","Text":"threaded hex nut with a circumscribed"},{"Start":"00:33.589 ","End":"00:34.989","Text":"polygon on the top plane."},{"Start":"00:35.859 ","End":"00:38.089","Text":"As you click on the center origin and drag"},{"Start":"00:38.090 ","End":"00:40.370","Text":"out you’ll notice we can type the distance"},{"Start":"00:40.530 ","End":"00:43.280","Text":"AND the number of sides the polygon has."},{"Start":"00:44.610 ","End":"00:47.030","Text":"We’ll type in 10mm for the distance"},{"Start":"00:47.469 ","End":"00:49.870","Text":"and keep the number of sides set to 6."},{"Start":"00:51.280 ","End":"00:53.049","Text":"Now, to exit the polygon sketch"},{"Start":"00:53.059 ","End":"00:54.779","Text":"feature we’ll click on the vertical"},{"Start":"00:55.130 ","End":"00:57.500","Text":"or horizontal line, making sure that"},{"Start":"00:57.500 ","End":"00:59.820","Text":"our hex nut snaps into place with the"},{"Start":"00:59.980 ","End":"01:03.580","Text":"same orientation of our X and Y-axis."},{"Start":"01:05.200 ","End":"01:06.549","Text":"We’ll create the thickness of the"},{"Start":"01:06.550 ","End":"01:08.809","Text":"hex nut by using the extrude feature."},{"Start":"01:09.469 ","End":"01:11.720","Text":"If you remember from the previous lessons"},{"Start":"01:11.770 ","End":"01:13.930","Text":"we can either go to create \u003e and select"},{"Start":"01:13.930 ","End":"01:16.990","Text":"extrude OR we can hit the keyboard"},{"Start":"01:16.990 ","End":"01:20.260","Text":"shortcut letter “E.” We’ll drag the"},{"Start":"01:20.260 ","End":"01:23.110","Text":"arrow up until we get to 10mm and we’ll"},{"Start":"01:23.110 ","End":"01:25.539","Text":"hit enter to escape the extrude command."},{"Start":"01:27.389 ","End":"01:28.699","Text":"Now we want to create the"},{"Start":"01:28.699 ","End":"01:30.769","Text":"chamfered edges of the hex nut."},{"Start":"01:31.390 ","End":"01:33.660","Text":"In many cases, we could simply use the"},{"Start":"01:34.200 ","End":"01:36.090","Text":"chamfer command, but it won’t work for"},{"Start":"01:36.090 ","End":"01:38.490","Text":"this hex nut because we want the chamfer"},{"Start":"01:38.490 ","End":"01:40.800","Text":"to follow this inner circular shape."},{"Start":"01:42.289 ","End":"01:44.440","Text":"Fortunately, like anything in Fusion"},{"Start":"01:44.440 ","End":"01:46.870","Text":"360, there are always workarounds to"},{"Start":"01:46.870 ","End":"01:48.959","Text":"achieve exactly what you’re looking for."},{"Start":"01:49.689 ","End":"01:51.250","Text":"Let’s go ahead and view the"},{"Start":"01:51.250 ","End":"01:52.770","Text":"nut from the home position."},{"Start":"01:53.520 ","End":"01:55.760","Text":"Now, I want to create a new sketch"},{"Start":"01:55.780 ","End":"01:57.450","Text":"on a plane that goes directly"},{"Start":"01:57.460 ","End":"01:59.199","Text":"through the center of the hex nut,"},{"Start":"01:59.259 ","End":"02:01.160","Text":"so when we use the revolve feature"},{"Start":"02:01.170 ","End":"02:02.739","Text":"we have a symmetrical shape."},{"Start":"02:03.360 ","End":"02:05.039","Text":"To create this plane we’ll simply"},{"Start":"02:05.039 ","End":"02:07.590","Text":"create a new sketch from the XY plane"},{"Start":"02:07.630 ","End":"02:09.949","Text":"of the browser by right-clicking"},{"Start":"02:09.990 ","End":"02:11.630","Text":"and hitting “create sketch.”"},{"Start":"02:12.890 ","End":"02:14.730","Text":"I’ll view the front of the object"},{"Start":"02:14.809 ","End":"02:16.299","Text":"and call the line command with the"},{"Start":"02:16.300 ","End":"02:19.460","Text":"keyboard shortcut “L.” Now, I’ll"},{"Start":"02:19.460 ","End":"02:21.790","Text":"create a horizontal line and vertical"},{"Start":"02:21.790 ","End":"02:24.800","Text":"line, both with dimensions of 1.5mm."},{"Start":"02:32.139 ","End":"02:33.470","Text":"We’ll connect them together,"},{"Start":"02:33.510 ","End":"02:34.859","Text":"making a triangle shape…."},{"Start":"02:35.530 ","End":"02:38.109","Text":"Then, using the revolve feature we"},{"Start":"02:38.110 ","End":"02:40.429","Text":"can rotate this chamfered shape around"},{"Start":"02:40.549 ","End":"02:42.519","Text":"and cut it out at the same time."},{"Start":"02:43.109 ","End":"02:44.770","Text":"After clicking the revolve feature"},{"Start":"02:44.810 ","End":"02:46.829","Text":"I’ll make sure to select the profile"},{"Start":"02:46.840 ","End":"02:49.260","Text":"or this triangle shape we created,"},{"Start":"02:49.790 ","End":"02:51.759","Text":"and I’ll also select the center axis."},{"Start":"02:52.650 ","End":"02:54.250","Text":"Lastly, we’ll want to make sure that"},{"Start":"02:54.250 ","End":"02:56.880","Text":"we have “cut” selected as the operation"},{"Start":"02:56.910 ","End":"02:58.790","Text":"ensuring that we are cutting away"},{"Start":"02:58.790 ","End":"03:00.770","Text":"from the shape and not adding to it."},{"Start":"03:01.690 ","End":"03:03.480","Text":"If we click the home position and take"},{"Start":"03:03.480 ","End":"03:05.899","Text":"a look at what we just completed we’ll"},{"Start":"03:05.900 ","End":"03:07.880","Text":"notice that the chamfered edges follow"},{"Start":"03:08.320 ","End":"03:10.400","Text":"or revolved around this circular shape."},{"Start":"03:11.509 ","End":"03:14.230","Text":"Most hex nuts are symmetrical so I’ll want"},{"Start":"03:14.230 ","End":"03:16.270","Text":"the chamfered edges that we just created"},{"Start":"03:16.270 ","End":"03:18.620","Text":"to also be on the bottom of the hex nut."},{"Start":"03:19.310 ","End":"03:20.820","Text":"To do this we’ll use the mirror"},{"Start":"03:20.820 ","End":"03:23.010","Text":"feature, but first, we need to create"},{"Start":"03:23.050 ","End":"03:25.020","Text":"a center plane that we’ll reference."},{"Start":"03:26.309 ","End":"03:28.660","Text":"To create a center plane, also called"},{"Start":"03:28.710 ","End":"03:31.069","Text":"a “midplane,” select “midplane”"},{"Start":"03:31.080 ","End":"03:32.979","Text":"from the construct drop-down menu."},{"Start":"03:33.820 ","End":"03:36.090","Text":"Then, all we have to do is select"},{"Start":"03:36.090 ","End":"03:38.299","Text":"the top and the bottom surfaces."},{"Start":"03:39.830 ","End":"03:41.829","Text":"Now if we exit the midplane command"},{"Start":"03:41.850 ","End":"03:43.320","Text":"we can call the mirror feature"},{"Start":"03:43.330 ","End":"03:45.029","Text":"from the create drop-down menu."},{"Start":"03:45.690 ","End":"03:47.209","Text":"Looking at the mirror dialogue"},{"Start":"03:47.259 ","End":"03:48.689","Text":"box you’ll see that we have a"},{"Start":"03:48.700 ","End":"03:50.419","Text":"few different options to mirror."},{"Start":"03:50.910 ","End":"03:52.670","Text":"For this specific scenario, we"},{"Start":"03:52.670 ","End":"03:54.480","Text":"want to mirror the revolve feature"},{"Start":"03:54.490 ","End":"03:56.530","Text":"that we just completed, so we’ll"},{"Start":"03:56.530 ","End":"03:58.870","Text":"select feature as the pattern type."},{"Start":"03:59.370 ","End":"04:01.000","Text":"Then, we’ll go ahead and select"},{"Start":"04:01.120 ","End":"04:02.230","Text":"our object by clicking on"},{"Start":"04:02.230 ","End":"04:03.930","Text":"the revolve in our timeline."},{"Start":"04:04.590 ","End":"04:06.149","Text":"Lastly, we’ll select the midplane"},{"Start":"04:06.559 ","End":"04:08.790","Text":"that we created as our mirror plane,"},{"Start":"04:09.200 ","End":"04:11.349","Text":"and click okay to see the results."},{"Start":"04:12.990 ","End":"04:14.410","Text":"Now that we’re done with this midplane"},{"Start":"04:14.890 ","End":"04:16.710","Text":"we can hide it by right-clicking on it"},{"Start":"04:16.860 ","End":"04:18.870","Text":"and clicking the show/hide lightbulb"},{"Start":"04:19.050 ","End":"04:21.630","Text":"OR as an alternative we can always"},{"Start":"04:21.630 ","End":"04:23.969","Text":"use the keyboard shortcut letter “V.”"},{"Start":"04:25.349 ","End":"04:27.229","Text":"Now the last thing we need to do"},{"Start":"04:27.440 ","End":"04:29.050","Text":"to finish off our threaded hex"},{"Start":"04:29.050 ","End":"04:30.919","Text":"nut is create the threaded hole."},{"Start":"04:32.120 ","End":"04:34.320","Text":"We could do this by creating a circular"},{"Start":"04:34.320 ","End":"04:37.090","Text":"sketch, creating an extruded cut, and then"},{"Start":"04:37.090 ","End":"04:39.950","Text":"creating a new thread… BUT, a much faster"},{"Start":"04:39.969 ","End":"04:42.340","Text":"option would be to use the hole feature."},{"Start":"04:43.420 ","End":"04:44.830","Text":"You’ll find the hole feature under"},{"Start":"04:44.830 ","End":"04:47.070","Text":"the \u0027create\u0027 drop-down menu, or by"},{"Start":"04:47.070 ","End":"04:48.820","Text":"calling it with the keyboard shortcut"},{"Start":"04:48.860 ","End":"04:51.750","Text":"letter “H.” After activating the"},{"Start":"04:51.750 ","End":"04:53.169","Text":"hole command we’ll want to click"},{"Start":"04:53.170 ","End":"04:55.050","Text":"directly on our center origin."},{"Start":"04:55.960 ","End":"04:58.210","Text":"Now we’ll see in the hole dialogue box"},{"Start":"04:58.210 ","End":"04:59.700","Text":"we have many different options that"},{"Start":"04:59.700 ","End":"05:01.870","Text":"we can edit, allowing us to create the"},{"Start":"05:01.870 ","End":"05:03.990","Text":"perfect threaded hole for our needs."},{"Start":"05:04.760 ","End":"05:06.420","Text":"For the purpose of the hex nut,"},{"Start":"05:06.500 ","End":"05:07.960","Text":"we’ll select countersink as"},{"Start":"05:07.960 ","End":"05:09.840","Text":"the hole type, giving us these"},{"Start":"05:09.840 ","End":"05:11.859","Text":"chamfered or countersunk edges."},{"Start":"05:12.590 ","End":"05:15.030","Text":"We’ll select tapped as the hole tap type,"},{"Start":"05:15.559 ","End":"05:17.380","Text":"which will create the thread in our hole."},{"Start":"05:18.259 ","End":"05:20.619","Text":"We’ll select full as the thread offset"},{"Start":"05:20.620 ","End":"05:22.060","Text":"because we want the thread to be the"},{"Start":"05:22.060 ","End":"05:24.380","Text":"whole entire length of our hole… and we’ll"},{"Start":"05:24.390 ","End":"05:26.630","Text":"use the arrow to drag this down to 10mm."},{"Start":"05:27.980 ","End":"05:29.820","Text":"We’ll leave the drill point on flat."},{"Start":"05:31.360 ","End":"05:33.540","Text":"The length here we already created"},{"Start":"05:33.540 ","End":"05:35.469","Text":"by dragging the arrow down...so,"},{"Start":"05:35.469 ","End":"05:37.880","Text":"we’ll use 12mm as the width and"},{"Start":"05:37.880 ","End":"05:39.620","Text":"we’ll leave it at 90 degrees."},{"Start":"05:40.990 ","End":"05:42.700","Text":"The last few options here come"},{"Start":"05:42.700 ","End":"05:44.610","Text":"in handy if you are 3D modeling"},{"Start":"05:44.610 ","End":"05:47.440","Text":"a thread or hole specific to some"},{"Start":"05:47.440 ","End":"05:49.039","Text":"sort of international standard."},{"Start":"05:49.680 ","End":"05:52.250","Text":"For this example I’m just going to use GB"},{"Start":"05:52.290 ","End":"05:59.100","Text":"metric profile, 12mm as the size, M12x1"},{"Start":"05:59.150 ","End":"06:01.830","Text":"as the designation, and the last two"},{"Start":"06:01.860 ","End":"06:03.950","Text":"options we can leave at their default."},{"Start":"06:04.630 ","End":"06:06.349","Text":"Now, last but not least we have the"},{"Start":"06:06.350 ","End":"06:09.039","Text":"most important step of this dialog box."},{"Start":"06:09.740 ","End":"06:11.049","Text":"In its current state, the"},{"Start":"06:11.429 ","End":"06:12.740","Text":"threaded hole we’ve created thus"},{"Start":"06:12.740 ","End":"06:15.060","Text":"far is just a graphical image."},{"Start":"06:15.679 ","End":"06:18.960","Text":"We have to select “modeled” here to make"},{"Start":"06:18.960 ","End":"06:21.010","Text":"sure the thread is actually 3D modeled."},{"Start":"06:21.710 ","End":"06:23.340","Text":"If we were to leave this unchecked"},{"Start":"06:23.340 ","End":"06:25.060","Text":"the thread would simply be a visual"},{"Start":"06:25.060 ","End":"06:27.669","Text":"representation of a thread and it would"},{"Start":"06:27.670 ","End":"06:29.890","Text":"not show up if we went to 3D print this."}],"ID":28989},{"Watched":false,"Name":"Day 7 - 3D Model a Handlebar Grip","Duration":"8m 54s","ChapterTopicVideoID":27787,"CourseChapterTopicPlaylistID":275347,"HasSubtitles":true,"ThumbnailPath":null,"UploadDate":null,"DurationForVideoObject":null,"Description":null,"MetaTitle":null,"MetaDescription":null,"Canonical":null,"VideoComments":[],"Subtitles":[{"Start":"00:00.140 ","End":"00:00.679","Text":"Kevin Kennedy: Hey there, it’s"},{"Start":"00:00.680 ","End":"00:03.119","Text":"Kevin, and welcome to Day #7"},{"Start":"00:03.190 ","End":"00:05.890","Text":"of Learn Fusion 360 in 30 days."},{"Start":"00:06.630 ","End":"00:08.109","Text":"In this tutorial, I’ll show"},{"Start":"00:08.109 ","End":"00:10.220","Text":"you how to 3D model bike handle"},{"Start":"00:10.490 ","End":"00:12.450","Text":"grip with embossed letters."},{"Start":"00:13.900 ","End":"00:15.489","Text":"You’ll learn how to: use the press"},{"Start":"00:15.490 ","End":"00:18.300","Text":"pull feature, how to create text,"},{"Start":"00:18.890 ","End":"00:20.820","Text":"and how to create a new body."},{"Start":"00:22.500 ","End":"00:24.150","Text":"To get started let’s create a"},{"Start":"00:24.150 ","End":"00:26.510","Text":"center rectangle on the front plane."},{"Start":"00:33.170 ","End":"00:35.590","Text":"We’ll enter 1.25” for the"},{"Start":"00:35.590 ","End":"00:37.950","Text":"height and 5” for the length."},{"Start":"00:39.520 ","End":"00:41.300","Text":"We’re going to create the cylindrical"},{"Start":"00:41.300 ","End":"00:41.620","Text":"shape of our bike handle grip"},{"Start":"00:41.630 ","End":"00:43.930","Text":"this way so we can add a pattern"},{"Start":"00:43.940 ","End":"00:45.760","Text":"before we revolve it around."},{"Start":"00:46.700 ","End":"00:48.279","Text":"So I’m just going to use the rectangle"},{"Start":"00:48.280 ","End":"00:50.520","Text":"sketch tool and draw one out."},{"Start":"00:52.420 ","End":"00:54.850","Text":"Now one great thing about Fusion 360 is"},{"Start":"00:54.850 ","End":"00:57.040","Text":"that you can edit features later on in"},{"Start":"00:57.040 ","End":"00:59.690","Text":"your timeline… so sometimes it\u0027s best to"},{"Start":"00:59.690 ","End":"01:02.000","Text":"simply play around and try things out,"},{"Start":"01:02.400 ","End":"01:04.660","Text":"as we can always go back and change it."},{"Start":"01:06.380 ","End":"01:08.839","Text":"So after I draw this rectangle I’m going"},{"Start":"01:08.839 ","End":"01:11.050","Text":"to use the rectangular pattern tool to"},{"Start":"01:11.050 ","End":"01:13.429","Text":"extend it across the length of the handle."},{"Start":"01:13.440 ","End":"01:31.470","Text":"Now I’m going to draw a line, cutting"},{"Start":"01:31.470 ","End":"01:33.149","Text":"the rectangle in half, so we can"},{"Start":"01:33.150 ","End":"01:35.610","Text":"revolve the top around the center axis."},{"Start":"01:36.870 ","End":"01:38.870","Text":"Again we’ll use the keyboard shortcut"},{"Start":"01:38.880 ","End":"01:41.080","Text":"“L” for line and we’ll click the"},{"Start":"01:41.080 ","End":"01:44.689","Text":"first point and the second point."},{"Start":"01:46.080 ","End":"01:47.690","Text":"Now we’ll call the revolve tool"},{"Start":"01:47.690 ","End":"01:49.365","Text":"from the create dropdown list and"},{"Start":"01:49.400 ","End":"01:52.450","Text":"we’ll select the profile shape and…."},{"Start":"01:52.480 ","End":"01:54.110","Text":"for the axis, we’ll select the"},{"Start":"01:54.110 ","End":"01:56.030","Text":"centerline we just created."},{"Start":"01:59.200 ","End":"02:01.179","Text":"Now at this point, if I didn’t like the"},{"Start":"02:01.200 ","End":"02:03.099","Text":"thickness of these rubber grips I could"},{"Start":"02:03.110 ","End":"02:05.639","Text":"go down to the Fusion 360 timeline and"},{"Start":"02:05.709 ","End":"02:09.080","Text":"edit the original sketch by right-clicking"},{"Start":"02:09.170 ","End":"02:11.200","Text":"and selecting “edit sketch.” or"},{"Start":"02:11.200 ","End":"02:13.320","Text":"by simply double-clicking on it."},{"Start":"02:15.740 ","End":"02:18.230","Text":"Now if I zoom in a bit I can simply drag"},{"Start":"02:18.230 ","End":"02:20.940","Text":"around the first rectangle we created and"},{"Start":"02:20.940 ","End":"02:22.554","Text":"you’ll notice because I used the rectangle"},{"Start":"02:22.554 ","End":"02:24.890","Text":"pattern tool all of the other rectangles"},{"Start":"02:24.900 ","End":"02:27.820","Text":"will naturally follow any changes I make."},{"Start":"02:29.670 ","End":"02:30.760","Text":"Once I’m happy with the"},{"Start":"02:30.760 ","End":"02:32.329","Text":"position I’ll click the stop"},{"Start":"02:32.330 ","End":"02:33.810","Text":"sketch button on the toolbar."},{"Start":"02:36.290 ","End":"02:38.310","Text":"Now I want to create an aluminum ring"},{"Start":"02:38.360 ","End":"02:40.310","Text":"around the inner part of the handle here."},{"Start":"02:40.719 ","End":"02:43.180","Text":"To do so I’ll create a sketch on the left"},{"Start":"02:43.180 ","End":"02:45.430","Text":"side by calling circle with the keyboard"},{"Start":"02:45.430 ","End":"02:48.600","Text":"shortcut “C.” I’m just going to click"},{"Start":"02:48.600 ","End":"02:50.569","Text":"in the center origin and drag it out"},{"Start":"02:50.610 ","End":"02:53.000","Text":"a bit further than the existing shape."},{"Start":"02:54.950 ","End":"02:56.600","Text":"Now I’ll hit letter “E” on the"},{"Start":"02:56.600 ","End":"02:58.350","Text":"keyboard for extrude, and I’ll"},{"Start":"02:58.350 ","End":"03:00.200","Text":"drag it over half an inch."},{"Start":"03:00.210 ","End":"03:05.500","Text":"Now here’s the important part… If we take"},{"Start":"03:05.510 ","End":"03:07.880","Text":"a look at the extrude dialog box we’ll"},{"Start":"03:07.880 ","End":"03:10.629","Text":"see the “operation” feature at the bottom"},{"Start":"03:10.660 ","End":"03:13.559","Text":"is currently set to “join.” Now if I"},{"Start":"03:13.559 ","End":"03:16.139","Text":"leave this set to “join” then this shape"},{"Start":"03:16.170 ","End":"03:18.869","Text":"we just created will join, or literally"},{"Start":"03:18.879 ","End":"03:20.920","Text":"be part of the rest of the object…."},{"Start":"03:21.560 ","End":"03:24.210","Text":"But, if I change this to “new body”"},{"Start":"03:24.420 ","End":"03:25.920","Text":"I will have an entirely different"},{"Start":"03:25.980 ","End":"03:28.360","Text":"object, which will allow us to make"},{"Start":"03:28.360 ","End":"03:30.640","Text":"this a different material and color."},{"Start":"03:31.469 ","End":"03:33.219","Text":"So if I right-click on this shape and"},{"Start":"03:33.219 ","End":"03:35.549","Text":"select “edit appearance” I can drag an"},{"Start":"03:35.549 ","End":"03:39.780","Text":"aluminum material onto it… and you’ll"},{"Start":"03:39.780 ","End":"03:42.090","Text":"see that it only applies to this part of"},{"Start":"03:42.100 ","End":"03:44.829","Text":"the object because we created a new body."},{"Start":"03:52.779 ","End":"03:54.389","Text":"So we’ll go ahead and close the"},{"Start":"03:54.390 ","End":"03:56.290","Text":"appearance dialogue box and now we’ll"},{"Start":"03:56.290 ","End":"03:58.579","Text":"want to make our handlebar grip hollow"},{"Start":"03:58.840 ","End":"04:00.920","Text":"so it can slide onto a bike handle."},{"Start":"04:01.940 ","End":"04:03.406","Text":"Under the modify dropdown list"},{"Start":"04:03.406 ","End":"04:06.560","Text":"we’ll create a new shell, select"},{"Start":"04:06.560 ","End":"04:08.670","Text":"the side of the handlebar, and"},{"Start":"04:08.900 ","End":"04:11.400","Text":"enter the dimensions of .05”"},{"Start":"04:14.150 ","End":"04:17.200","Text":"Now I want to add some text or branding"},{"Start":"04:17.200 ","End":"04:19.640","Text":"to the handlebar, but first I’m going"},{"Start":"04:19.640 ","End":"04:21.790","Text":"to need to clear a surface on the side."},{"Start":"04:22.559 ","End":"04:24.789","Text":"To do so I’ll zoom in on the right"},{"Start":"04:24.980 ","End":"04:26.940","Text":"and right-click on the farthest grip"},{"Start":"04:26.940 ","End":"04:29.349","Text":"here in order to create a new sketch."},{"Start":"04:31.020 ","End":"04:33.070","Text":"So I’m just going to draw a circle"},{"Start":"04:33.420 ","End":"04:35.590","Text":"slightly smaller than the width or our"},{"Start":"04:35.590 ","End":"04:42.510","Text":"handlebar grip and I’m going to draw"},{"Start":"04:42.510 ","End":"04:45.050","Text":"a line across the top and the bottom."},{"Start":"04:49.049 ","End":"04:51.600","Text":"Now again… I’m just guessing here, and"},{"Start":"04:51.600 ","End":"04:53.650","Text":"if I’m not happy with the result I can"},{"Start":"04:53.650 ","End":"04:55.990","Text":"always go back and edit it later on."},{"Start":"04:58.300 ","End":"05:00.040","Text":"We’ll have to now view it from the right"},{"Start":"05:00.040 ","End":"05:02.650","Text":"corner again, and we’ll hit letter “E” for"},{"Start":"05:02.650 ","End":"05:05.209","Text":"extrude and we’ll cut away most of this"},{"Start":"05:05.209 ","End":"05:07.439","Text":"by dragging the arrow over to the left."},{"Start":"05:07.449 ","End":"05:24.897","Text":"Now because I want to leave the first"},{"Start":"05:24.897 ","End":"05:24.941","Text":"few rubber rings here, and I don’t know"},{"Start":"05:24.941 ","End":"05:24.980","Text":"the exact distance I can select “to"},{"Start":"05:24.980 ","End":"05:25.013","Text":"object” from the “extent” option and"},{"Start":"05:25.013 ","End":"05:25.057","Text":"select the surface I want it to cut"},{"Start":"05:25.057 ","End":"05:25.095","Text":"all the way too...and I’ll go ahead"},{"Start":"05:25.095 ","End":"05:25.128","Text":"click “okay” to finalize the cut."},{"Start":"05:25.128 ","End":"05:27.219","Text":"Now to create text we’ll select “text”"},{"Start":"05:27.240 ","End":"05:30.880","Text":"from the sketch dropdown menu and"},{"Start":"05:30.880 ","End":"05:33.280","Text":"select the center plane on the X-axis."},{"Start":"05:35.170 ","End":"05:36.989","Text":"With the text feature, the first thing"},{"Start":"05:36.990 ","End":"05:38.920","Text":"you always have to do is select where"},{"Start":"05:38.920 ","End":"05:41.029","Text":"the text will start, so I’ll just"},{"Start":"05:41.029 ","End":"05:43.200","Text":"click anywhere here as we can always"},{"Start":"05:43.210 ","End":"05:45.140","Text":"move this, and then I’ll go ahead and"},{"Start":"05:45.370 ","End":"05:47.820","Text":"type in “Mountaineer” as the brand."},{"Start":"05:52.700 ","End":"05:54.539","Text":"In the rest of the text dialogue box,"},{"Start":"05:54.539 ","End":"05:56.619","Text":"you can play around with text height,"},{"Start":"05:57.429 ","End":"06:00.669","Text":"angle, font, and a few other options."},{"Start":"06:01.640 ","End":"06:03.390","Text":"I’m just going to tweak the options here"},{"Start":"06:03.400 ","End":"06:07.740","Text":"until I’m happy with the result, and"},{"Start":"06:07.850 ","End":"06:10.429","Text":"I’ll click okay to exit the text feature."},{"Start":"06:11.690 ","End":"06:13.690","Text":"Now if we view this from the left side"},{"Start":"06:13.730 ","End":"06:15.719","Text":"we’ll see the text is just floating"},{"Start":"06:15.719 ","End":"06:17.700","Text":"on a plane in the middle of our grip."},{"Start":"06:18.369 ","End":"06:20.789","Text":"So we’ll have to extrude so it pops"},{"Start":"06:20.790 ","End":"06:22.989","Text":"out of this outer surface here, but"},{"Start":"06:22.990 ","End":"06:25.050","Text":"instead of using the extrude command,"},{"Start":"06:25.060 ","End":"06:26.810","Text":"I’m going to right-click on the text"},{"Start":"06:26.849 ","End":"06:28.840","Text":"and select the “press pull” feature."},{"Start":"06:29.800 ","End":"06:31.500","Text":"So the main difference between the press"},{"Start":"06:31.500 ","End":"06:33.700","Text":"pull feature and the extrude feature is"},{"Start":"06:33.700 ","End":"06:36.600","Text":"that press pull works on faces and/or"},{"Start":"06:36.670 ","End":"06:39.490","Text":"edges while the extrude feature works"},{"Start":"06:39.490 ","End":"06:42.260","Text":"on sketch profiles or planar surfaces."},{"Start":"06:42.850 ","End":"06:46.570","Text":"So I’ll select “text” as the"},{"Start":"06:46.580 ","End":"06:49.040","Text":"profile, and I want you to take note"},{"Start":"06:49.099 ","End":"06:52.010","Text":"of where the arrow is right now."},{"Start":"06:52.010 ","End":"06:53.319","Text":"Okay, it’s in the middle of"},{"Start":"06:53.320 ","End":"06:55.480","Text":"our grip just next to the text."},{"Start":"06:56.230 ","End":"06:58.220","Text":"Now in the extrude dialog box we\u0027re"},{"Start":"06:58.230 ","End":"07:00.409","Text":"going to change the start from"},{"Start":"07:00.790 ","End":"07:03.340","Text":"to “from object” and then select"},{"Start":"07:03.340 ","End":"07:05.299","Text":"the outer cylinder surface here."},{"Start":"07:07.110 ","End":"07:08.590","Text":"NOW… you’ll see the arrow"},{"Start":"07:08.590 ","End":"07:10.340","Text":"jumped to the outer surface…."},{"Start":"07:10.889 ","End":"07:14.190","Text":"So if we type in .03” for the distance"},{"Start":"07:14.650 ","End":"07:16.620","Text":"you’ll see that our text is being extruded"},{"Start":"07:16.730 ","End":"07:18.660","Text":"from the cylinder here and not the"},{"Start":"07:18.660 ","End":"07:20.930","Text":"middle where our text plane actually is."},{"Start":"07:21.610 ","End":"07:23.419","Text":"Now obviously that’s what we want,"},{"Start":"07:23.450 ","End":"07:25.440","Text":"so I\u0027ll go ahead and click okay."},{"Start":"07:27.730 ","End":"07:30.099","Text":"Now taking a look at this I don’t like"},{"Start":"07:30.100 ","End":"07:31.770","Text":"how much space is around the text."},{"Start":"07:31.870 ","End":"07:34.050","Text":"So once again, this isn’t a problem"},{"Start":"07:34.050 ","End":"07:36.180","Text":"because we can go back and edit features."},{"Start":"07:36.810 ","End":"07:38.490","Text":"I’m going to right-click and edit"},{"Start":"07:38.490 ","End":"07:40.537","Text":"this sketch, and I’m simply going"},{"Start":"07:40.537 ","End":"07:42.010","Text":"to drag the lines around until"},{"Start":"07:42.010 ","End":"07:43.210","Text":"they are closer to the text."},{"Start":"07:43.210 ","End":"07:53.250","Text":"I’ll hit stop sketch when I’m done,"},{"Start":"07:54.500 ","End":"07:56.409","Text":"and take a look at the new results."},{"Start":"08:00.590 ","End":"08:02.040","Text":"And I can go ahead and keep"},{"Start":"08:02.040 ","End":"08:03.520","Text":"playing around with it until I’m"},{"Start":"08:03.520 ","End":"08:04.980","Text":"happy with the final results."},{"Start":"08:04.980 ","End":"08:17.460","Text":"Lastly, I’ll throw a fillet of .1” on the"},{"Start":"08:17.500 ","End":"08:19.790","Text":"edge here and I’ll add the appearance of"},{"Start":"08:19.790 ","End":"08:22.050","Text":"rubber to make it a bit more realistic."}],"ID":28990},{"Watched":false,"Name":"Day 8 - 3D Model a Doorstop","Duration":"7m 13s","ChapterTopicVideoID":27788,"CourseChapterTopicPlaylistID":275347,"HasSubtitles":true,"ThumbnailPath":null,"UploadDate":null,"DurationForVideoObject":null,"Description":null,"MetaTitle":null,"MetaDescription":null,"Canonical":null,"VideoComments":[],"Subtitles":[{"Start":"00:00.050 ","End":"00:01.480","Text":"Kevin Kennedy: Welcome to Day #8"},{"Start":"00:01.580 ","End":"00:04.320","Text":"of Learn Fusion 360 in 30 days."},{"Start":"00:04.410 ","End":"00:05.810","Text":"In this tutorial, I’ll show"},{"Start":"00:05.810 ","End":"00:07.860","Text":"you how to 3D model a doorstop."},{"Start":"00:08.880 ","End":"00:10.500","Text":"You’ll learn how to: use the box"},{"Start":"00:10.500 ","End":"00:13.690","Text":"feature, cylinder feature, the chamfer"},{"Start":"00:13.710 ","End":"00:16.510","Text":"tool, 2-tangent circle feature,"},{"Start":"00:18.080 ","End":"00:21.680","Text":"construction line, and the draft feature."},{"Start":"00:22.740 ","End":"00:24.520","Text":"To get started we’ll create a simple"},{"Start":"00:24.530 ","End":"00:26.650","Text":"box using the box feature, which"},{"Start":"00:26.740 ","End":"00:28.800","Text":"essentially saves us the step of"},{"Start":"00:28.800 ","End":"00:30.739","Text":"having to create a rectangle sketch"},{"Start":"00:30.770 ","End":"00:32.500","Text":"that would be extruded anyway."},{"Start":"00:33.450 ","End":"00:34.529","Text":"The box feature can be"},{"Start":"00:34.529 ","End":"00:36.389","Text":"found under the create menu."},{"Start":"00:37.190 ","End":"00:38.840","Text":"After selecting it you’ll be"},{"Start":"00:38.840 ","End":"00:41.410","Text":"prompted to select a plane, so we’ll"},{"Start":"00:41.410 ","End":"00:43.190","Text":"select the top plane and click on"},{"Start":"00:43.190 ","End":"00:45.189","Text":"our center origin and drag it out."},{"Start":"00:45.849 ","End":"00:48.130","Text":"We’ll type in 1.8” for the"},{"Start":"00:48.130 ","End":"00:50.329","Text":"width and 5” for the length."},{"Start":"00:52.070 ","End":"00:53.999","Text":"After hitting enter you’ll notice"},{"Start":"00:54.010 ","End":"00:55.830","Text":"how it’s already created a box and"},{"Start":"00:55.830 ","End":"00:57.940","Text":"we can simply increase or decrease"},{"Start":"00:57.970 ","End":"01:00.160","Text":"the height with the arrow, OR by"},{"Start":"01:00.190 ","End":"01:01.949","Text":"typing in the exact dimensions."},{"Start":"01:02.710 ","End":"01:04.809","Text":"For the height, I’ll enter only .2”"},{"Start":"01:05.679 ","End":"01:07.449","Text":"because the draft feature will create"},{"Start":"01:07.450 ","End":"01:09.259","Text":"the rest of our thickness later on."},{"Start":"01:10.059 ","End":"01:12.309","Text":"Now we’ll use the cylinder feature"},{"Start":"01:12.350 ","End":"01:15.119","Text":"under the create menu, select the top"},{"Start":"01:15.120 ","End":"01:17.179","Text":"of the box that we just created, and"},{"Start":"01:17.180 ","End":"01:19.010","Text":"then we’ll select the midpoint here."},{"Start":"01:19.790 ","End":"01:21.690","Text":"You should see a triangle any"},{"Start":"01:21.690 ","End":"01:23.380","Text":"time that a feature can snap to"},{"Start":"01:23.380 ","End":"01:25.580","Text":"the midpoint of a line or plane."},{"Start":"01:26.389 ","End":"01:27.769","Text":"So I’ll click on the midpoint and"},{"Start":"01:27.770 ","End":"01:29.089","Text":"then I’ll just click on the edge of"},{"Start":"01:29.090 ","End":"01:30.949","Text":"our box, giving it the same width."},{"Start":"01:32.270 ","End":"01:34.270","Text":"And once again I’ll use the thickness of"},{"Start":"01:34.310 ","End":"01:37.570","Text":".2”, but this time I’ll have to make sure"},{"Start":"01:37.570 ","End":"01:39.200","Text":"that I’m heading in the same direction as"},{"Start":"01:39.200 ","End":"01:41.880","Text":"the box, and I’ll make sure the operation"},{"Start":"01:41.910 ","End":"01:44.690","Text":"is set to “join” before clicking “ok.”"},{"Start":"01:45.750 ","End":"01:47.630","Text":"Now that we have our basic shape down"},{"Start":"01:47.650 ","End":"01:49.690","Text":"we’re going to use the “draft” feature to"},{"Start":"01:49.690 ","End":"01:52.149","Text":"create the angled surface of the doorstop."},{"Start":"01:53.160 ","End":"01:55.310","Text":"When we activate the draft feature from"},{"Start":"01:55.310 ","End":"01:58.050","Text":"the modify dropdown list will be prompted"},{"Start":"01:58.059 ","End":"02:00.640","Text":"to select the plane, in which we’ll select"},{"Start":"02:00.650 ","End":"02:02.940","Text":"the front here, and then we’ll select"},{"Start":"02:02.940 ","End":"02:05.679","Text":"the top face for the “faces” selection."},{"Start":"02:06.830 ","End":"02:08.729","Text":"So if you see this dotted line"},{"Start":"02:08.740 ","End":"02:10.320","Text":"here, that is the point at"},{"Start":"02:10.320 ","End":"02:12.220","Text":"which the draft angle pivots."},{"Start":"02:12.780 ","End":"02:14.560","Text":"So if I take this slider and drag"},{"Start":"02:14.560 ","End":"02:16.260","Text":"it to about 9 degrees then we’ll"},{"Start":"02:16.260 ","End":"02:18.410","Text":"get the basic shape of the doorstop."},{"Start":"02:20.110 ","End":"02:22.440","Text":"Now, after clicking okay, we’ll want"},{"Start":"02:22.449 ","End":"02:23.899","Text":"to add a few things to make this"},{"Start":"02:23.910 ","End":"02:25.770","Text":"doorstop work a little bit better."},{"Start":"02:27.460 ","End":"02:29.140","Text":"The first thing I’m going to do is"},{"Start":"02:29.140 ","End":"02:30.810","Text":"add a chamfer to the front of it."},{"Start":"02:30.980 ","End":"02:32.540","Text":"In previous lessons, we’ve used"},{"Start":"02:32.540 ","End":"02:34.060","Text":"the fillet tool, which creates"},{"Start":"02:34.060 ","End":"02:36.089","Text":"rounded or filleted edges."},{"Start":"02:36.639 ","End":"02:38.650","Text":"On the other hand, the chamfer tool"},{"Start":"02:38.650 ","End":"02:41.090","Text":"creates beveled, or chamfered edges."},{"Start":"02:42.250 ","End":"02:43.940","Text":"After selecting chamfer from the"},{"Start":"02:43.940 ","End":"02:46.310","Text":"modify dropdown lists I can select"},{"Start":"02:46.310 ","End":"02:48.470","Text":"the front line of the doorstop and"},{"Start":"02:48.470 ","End":"02:51.480","Text":"type in .2” which was our thickness."},{"Start":"02:53.130 ","End":"02:54.739","Text":"You’ll see that immediately after"},{"Start":"02:54.740 ","End":"02:56.389","Text":"I type in the dimension it applied"},{"Start":"02:56.389 ","End":"02:58.159","Text":"a beveled edge to the front."},{"Start":"03:00.750 ","End":"03:02.560","Text":"Now, we’ll use the viewcube"},{"Start":"03:02.600 ","End":"03:04.030","Text":"to take a look at the bottom."},{"Start":"03:04.700 ","End":"03:06.359","Text":"And we’ll use the shell feature from the"},{"Start":"03:06.360 ","End":"03:08.650","Text":"modify dropdown list to hollow out the"},{"Start":"03:08.650 ","End":"03:11.650","Text":"body, making it more realistic… like this"},{"Start":"03:12.350 ","End":"03:14.749","Text":"were injection-molded plastic or rubber."},{"Start":"03:15.759 ","End":"03:17.600","Text":"After activating the shell command"},{"Start":"03:17.629 ","End":"03:19.320","Text":"I’ll select the bottom face and"},{"Start":"03:19.320 ","End":"03:21.790","Text":"I’ll enter .1” for the thickness."},{"Start":"03:24.710 ","End":"03:26.339","Text":"The next thing I want to do is add"},{"Start":"03:26.340 ","End":"03:28.060","Text":"a fillet or rounded edge around"},{"Start":"03:28.060 ","End":"03:30.189","Text":"the top surface, so the doorstop"},{"Start":"03:30.219 ","End":"03:31.809","Text":"doesn\u0027t have any sharp edges."},{"Start":"03:32.830 ","End":"03:34.340","Text":"I’ll call the fillet command with the"},{"Start":"03:34.340 ","End":"03:36.450","Text":"keyboard shortcut letter “F” and I’ll"},{"Start":"03:36.460 ","End":"03:42.325","Text":"select the top 4 lines and type in .08”"},{"Start":"03:45.860 ","End":"03:47.400","Text":"Lastly, I would like to add some"},{"Start":"03:47.400 ","End":"03:49.210","Text":"rubber grips to the top surface"},{"Start":"03:49.210 ","End":"03:51.070","Text":"of the doorstop so a heavy door"},{"Start":"03:51.120 ","End":"03:52.360","Text":"doesn’t slide away from it."},{"Start":"03:53.329 ","End":"03:54.490","Text":"To start off I’m going to"},{"Start":"03:54.490 ","End":"03:56.570","Text":"create a new rectangle and I’ll"},{"Start":"03:56.570 ","End":"03:58.210","Text":"click on the top surface here."},{"Start":"04:01.940 ","End":"04:03.220","Text":"I’m going to make the rectangle"},{"Start":"04:03.270 ","End":"04:06.019","Text":".1” wide and I’m just going to drag"},{"Start":"04:06.059 ","End":"04:08.020","Text":"way past the top here because I’ll"},{"Start":"04:08.020 ","End":"04:09.740","Text":"round out this top in a minute."},{"Start":"04:11.150 ","End":"04:12.588","Text":"I’m going to hit escape to exit the"},{"Start":"04:12.588 ","End":"04:12.704","Text":"rectangle command, and I’ll create a"},{"Start":"04:12.704 ","End":"04:12.820","Text":"center circle using the keyboard shortcut"},{"Start":"04:12.820 ","End":"04:12.956","Text":"letter “C.” I’ll click on the midpoint"},{"Start":"04:12.956 ","End":"04:13.111","Text":"again, and then I’ll click on either edge."},{"Start":"04:13.111 ","End":"04:17.519","Text":"I’ll hit letter “T”, the keyboard"},{"Start":"04:17.519 ","End":"04:30.630","Text":"shortcut for trim, and then I’ll select"},{"Start":"04:30.630 ","End":"04:32.360","Text":"the two lines to get them out of the"},{"Start":"04:32.360 ","End":"04:34.210","Text":"way and clean up my sketch a bit."},{"Start":"04:36.160 ","End":"04:37.970","Text":"Now, I’m going to use the rectangular"},{"Start":"04:37.970 ","End":"04:39.710","Text":"pattern sketch tool to create 4"},{"Start":"04:40.230 ","End":"04:42.430","Text":"total grips, and I’ll only have them"},{"Start":"04:42.430 ","End":"04:44.620","Text":"take over half the space because"},{"Start":"04:44.620 ","End":"04:46.080","Text":"I’m going to use the mirror feature"},{"Start":"04:46.230 ","End":"04:48.250","Text":"to create the rest in a minute."},{"Start":"04:59.120 ","End":"05:00.640","Text":"So before we mirror these over to"},{"Start":"05:00.640 ","End":"05:02.279","Text":"the other side I would like to round"},{"Start":"05:02.280 ","End":"05:04.249","Text":"over the top of each rectangle."},{"Start":"05:04.930 ","End":"05:06.169","Text":"To do this I’ll use the"},{"Start":"05:06.180 ","End":"05:08.190","Text":"2-tangent circle sketch tool."},{"Start":"05:08.960 ","End":"05:11.070","Text":"After activating it I’ll simply click"},{"Start":"05:11.070 ","End":"05:13.120","Text":"on one line followed by the other."},{"Start":"05:14.389 ","End":"05:15.990","Text":"Then, I’ll repeat this step"},{"Start":"05:16.010 ","End":"05:16.640","Text":"for the other 3 rectangles."},{"Start":"05:16.640 ","End":"05:16.674","Text":"Instead of going up to the sketch"},{"Start":"05:16.674 ","End":"05:16.714","Text":"menu each time I can right click and"},{"Start":"05:16.714 ","End":"05:17.936","Text":"hit “repeat 2-tangent circle,” which"},{"Start":"05:17.936 ","End":"05:22.001","Text":"will save us a little bit of time."},{"Start":"05:22.510 ","End":"05:24.160","Text":"Now before I extrude these rubber"},{"Start":"05:24.160 ","End":"05:25.700","Text":"grips I’ll have to copy them"},{"Start":"05:25.700 ","End":"05:26.979","Text":"over with the mirror feature."},{"Start":"05:27.630 ","End":"05:29.370","Text":"First, I’ll need to create a centerline"},{"Start":"05:29.740 ","End":"05:31.580","Text":"that the mirror feature can reference."},{"Start":"05:32.200 ","End":"05:34.650","Text":"So I’ll use the keyboard shortcut “L” to"},{"Start":"05:34.650 ","End":"05:37.499","Text":"draw a line directly in the center...and"},{"Start":"05:37.509 ","End":"05:39.780","Text":"anytime we add lines that are solely"},{"Start":"05:39.780 ","End":"05:41.600","Text":"for reference purposes we’ll want to"},{"Start":"05:41.600 ","End":"05:43.909","Text":"select the line and hit letter X on"},{"Start":"05:44.000 ","End":"05:46.220","Text":"keyboard, which is the shortcut that"},{"Start":"05:46.230 ","End":"05:48.690","Text":"turns the line into a construction line."},{"Start":"05:55.590 ","End":"05:57.140","Text":"After selecting the mirror feature"},{"Start":"05:57.140 ","End":"05:58.830","Text":"from the sketch dropdown list I can"},{"Start":"05:58.840 ","End":"06:01.290","Text":"simply click and drag completely"},{"Start":"06:01.290 ","End":"06:02.640","Text":"over all of the sketch items here,"},{"Start":"06:02.940 ","End":"06:04.590","Text":"which will select it all for me."},{"Start":"06:05.290 ","End":"06:06.520","Text":"Then, I’ll select the mirror"},{"Start":"06:06.520 ","End":"06:08.179","Text":"line selector and click on the"},{"Start":"06:08.179 ","End":"06:10.110","Text":"construction line that we just created."},{"Start":"06:11.820 ","End":"06:13.400","Text":"After exiting the mirror command"},{"Start":"06:13.400 ","End":"06:15.250","Text":"by clicking “ok” I’ll activate the"},{"Start":"06:15.250 ","End":"06:17.279","Text":"extrude command with letter “E”"},{"Start":"06:17.699 ","End":"06:19.000","Text":"and then I’ll select all of the"},{"Start":"06:19.000 ","End":"06:20.820","Text":"rounded rectangles that I’ve created."},{"Start":"06:21.950 ","End":"06:23.670","Text":"And because we didn’t trim out the"},{"Start":"06:23.680 ","End":"06:25.640","Text":"top circles I’ll have to select those"},{"Start":"06:25.640 ","End":"06:28.970","Text":"separately… now normally I would’ve"},{"Start":"06:28.970 ","End":"06:30.770","Text":"trimmed those out as well but I wanted"},{"Start":"06:30.770 ","End":"06:33.039","Text":"to reinforce why I used the trim"},{"Start":"06:33.049 ","End":"06:34.509","Text":"feature earlier on the bottom here."},{"Start":"06:36.129 ","End":"06:42.840","Text":"Next, I’ll extrude these up .05” and"},{"Start":"06:42.840 ","End":"06:44.539","Text":"then I’ll activate the fillet command"},{"Start":"06:44.540 ","End":"06:46.750","Text":"with the keyboard shortcut letter “F”"},{"Start":"06:48.300 ","End":"06:52.909","Text":"and round over all of these edges .04”."},{"Start":"06:52.920 ","End":"06:54.520","Text":"Last but not least, I\u0027ll just"},{"Start":"06:54.520 ","End":"06:56.050","Text":"throw a simple rubber material"},{"Start":"06:56.050 ","End":"06:57.780","Text":"on here by right-clicking and"},{"Start":"06:57.780 ","End":"06:59.380","Text":"selecting edit appearances..."},{"Start":"07:03.040 ","End":"07:04.640","Text":"and I’ll double click on the material"},{"Start":"07:04.640 ","End":"07:06.799","Text":"to change the color to a light brown."}],"ID":28991},{"Watched":false,"Name":"Day 9 - 3D Model a Lightbulb","Duration":"5m 30s","ChapterTopicVideoID":27789,"CourseChapterTopicPlaylistID":275347,"HasSubtitles":true,"ThumbnailPath":null,"UploadDate":null,"DurationForVideoObject":null,"Description":null,"MetaTitle":null,"MetaDescription":null,"Canonical":null,"VideoComments":[],"Subtitles":[{"Start":"00:00.190 ","End":"00:01.710","Text":"Kevin Kennedy: Welcome to Day #9"},{"Start":"00:01.740 ","End":"00:04.520","Text":"of Learn Fusion 360 in 30 days."},{"Start":"00:04.640 ","End":"00:06.210","Text":"In this tutorial, I’ll show you"},{"Start":"00:06.210 ","End":"00:08.830","Text":"how to 3D model a light bulb."},{"Start":"00:09.410 ","End":"00:11.270","Text":"You’ll learn how to: create a sphere,"},{"Start":"00:11.730 ","End":"00:13.810","Text":"and we’ll take another look at using"},{"Start":"00:13.810 ","End":"00:15.900","Text":"the chamfer tool and thread tool."},{"Start":"00:17.369 ","End":"00:19.150","Text":"We’ll start off by making sure that"},{"Start":"00:19.150 ","End":"00:20.870","Text":"our document settings are set to mm."},{"Start":"00:22.220 ","End":"00:24.820","Text":"If they’re not you can click on this icon"},{"Start":"00:24.830 ","End":"00:27.739","Text":"here and select mm from the dropdown list."},{"Start":"00:29.139 ","End":"00:31.430","Text":"Then, I’ll activate the cylinder"},{"Start":"00:31.430 ","End":"00:33.479","Text":"feature from the create dropdown menu."},{"Start":"00:34.190 ","End":"00:36.149","Text":"I’ll click on the top plane, click on"},{"Start":"00:36.150 ","End":"00:38.550","Text":"the center origin, drag-out with my"},{"Start":"00:38.550 ","End":"00:41.430","Text":"mouse, and type in 30mm for the width."},{"Start":"00:42.190 ","End":"00:44.660","Text":"Next, I’ll go ahead and drag the arrow"},{"Start":"00:44.740 ","End":"00:48.929","Text":"up or type in 40mm for the height and"},{"Start":"00:49.099 ","End":"00:51.870","Text":"click okay to exit the cylinder feature."},{"Start":"00:53.059 ","End":"00:54.469","Text":"Now that we have the stem"},{"Start":"00:54.469 ","End":"00:55.840","Text":"of our bulb, we’ll use the"},{"Start":"00:55.840 ","End":"00:57.690","Text":"sphere tool to create the top."},{"Start":"00:58.390 ","End":"01:00.430","Text":"But first, I’ll hit letter “L,” the"},{"Start":"01:00.440 ","End":"01:02.570","Text":"keyboard shortcut for line to create"},{"Start":"01:02.610 ","End":"01:05.170","Text":"a construction line on the XY plane."},{"Start":"01:06.660 ","End":"01:07.810","Text":"I’ll click on the top of the"},{"Start":"01:07.810 ","End":"01:11.399","Text":"cylinder and draw the line up 20mm."},{"Start":"01:14.169 ","End":"01:15.899","Text":"Then, I’ll hit letter “X,” the"},{"Start":"01:15.900 ","End":"01:17.470","Text":"keyboard shortcut that turns a"},{"Start":"01:17.470 ","End":"01:19.380","Text":"line into a construction line."},{"Start":"01:20.200 ","End":"01:22.009","Text":"I’m turning this into a construction"},{"Start":"01:22.010 ","End":"01:23.679","Text":"line because I’m only going to"},{"Start":"01:23.679 ","End":"01:25.579","Text":"use it for reference purposes."},{"Start":"01:27.289 ","End":"01:29.870","Text":"Next, I’ll activate the sphere tool from"},{"Start":"01:29.870 ","End":"01:31.850","Text":"the create dropdown menu, and I’ll click"},{"Start":"01:31.850 ","End":"01:34.119","Text":"on the endpoint of the construction line."},{"Start":"01:34.960 ","End":"01:37.250","Text":"I’ll type in 61mm for"},{"Start":"01:37.250 ","End":"01:38.380","Text":"the width of the sphere."},{"Start":"01:42.630 ","End":"01:44.390","Text":"Now to show the difference in bodies"},{"Start":"01:44.390 ","End":"01:46.009","Text":"here, I’ll right-click on the bulb"},{"Start":"01:46.029 ","End":"01:47.769","Text":"part and click on appearances."},{"Start":"01:48.459 ","End":"01:50.390","Text":"Now the bulb I’m modeling this"},{"Start":"01:50.390 ","End":"01:52.440","Text":"off of is a newer LED bulb, so the"},{"Start":"01:52.480 ","End":"01:54.650","Text":"top here is made out of plastic."},{"Start":"01:55.590 ","End":"01:57.540","Text":"I’ll drag a white glossy plastic"},{"Start":"01:57.540 ","End":"01:59.689","Text":"on top, and then hit the escape key"},{"Start":"01:59.719 ","End":"02:01.610","Text":"to exit the appearances feature."},{"Start":"02:04.000 ","End":"02:06.460","Text":"At this point, we want to add a nice taper"},{"Start":"02:06.490 ","End":"02:08.630","Text":"connecting the bulb and the cylinder here."},{"Start":"02:09.320 ","End":"02:10.640","Text":"I’ll select the line in the"},{"Start":"02:10.650 ","End":"02:12.140","Text":"middle here, and then I’ll hit the"},{"Start":"02:12.160 ","End":"02:14.140","Text":"letter “F,” the keyboard shortcut"},{"Start":"02:14.150 ","End":"02:15.930","Text":"for the fillet modify command."},{"Start":"02:17.330 ","End":"02:19.229","Text":"After activating the fillet command"},{"Start":"02:19.240 ","End":"02:21.889","Text":"I’ll punch in 45mm and click"},{"Start":"02:21.889 ","End":"02:24.109","Text":"okay on the fillet dialogue box."},{"Start":"02:24.149 ","End":"02:27.870","Text":"I’ll hit the letter “F,” for fillet"},{"Start":"02:28.020 ","End":"02:30.140","Text":"once again, and this time I’ll"},{"Start":"02:30.140 ","End":"02:31.859","Text":"select the bottom of the stem."},{"Start":"02:33.330 ","End":"02:36.210","Text":"I’m going to add a fillet of 4mm before"},{"Start":"02:36.210 ","End":"02:38.089","Text":"creating the thread on the bottom."},{"Start":"02:38.399 ","End":"02:43.630","Text":"Now to create the threaded area on"},{"Start":"02:43.630 ","End":"02:45.649","Text":"the bottom, I’ll activate the cylinder"},{"Start":"02:45.650 ","End":"02:47.220","Text":"feature from the create drop-down"},{"Start":"02:47.220 ","End":"02:50.120","Text":"menu and select the bottom plane here."},{"Start":"02:51.030 ","End":"02:53.079","Text":"I’ll click the center origin, and drag my"},{"Start":"02:53.080 ","End":"02:56.250","Text":"mouse out until it connects to the 22mm."},{"Start":"02:57.759 ","End":"02:59.339","Text":"Before exiting the cylinder"},{"Start":"02:59.340 ","End":"03:00.900","Text":"dialogue box I’ll change the"},{"Start":"03:00.900 ","End":"03:04.130","Text":"height to 15mm and make sure that"},{"Start":"03:04.140 ","End":"03:06.780","Text":"the operation is set to new body."},{"Start":"03:08.389 ","End":"03:10.380","Text":"Now to add the thread we’ll select"},{"Start":"03:10.380 ","End":"03:12.489","Text":"“thread” from the create dropdown menu."},{"Start":"03:13.440 ","End":"03:15.559","Text":"I’ll click model so we can see what we’re"},{"Start":"03:15.559 ","End":"03:17.440","Text":"doing here and I’ll select the thread"},{"Start":"03:17.440 ","End":"03:19.310","Text":"type to take a look at the presets."},{"Start":"03:20.370 ","End":"03:22.400","Text":"Now, in the US, where I’m located, the"},{"Start":"03:22.420 ","End":"03:24.990","Text":"standard thread for lightbulbs is ES,"},{"Start":"03:25.070 ","End":"03:26.659","Text":"which is short for the Edison Screw."},{"Start":"03:27.870 ","End":"03:30.010","Text":"I’ll select ANSI Metric M"},{"Start":"03:30.010 ","End":"03:31.699","Text":"profile for the thread type."},{"Start":"03:32.320 ","End":"03:35.829","Text":"Then, I’ll select m22x3 for the"},{"Start":"03:36.160 ","End":"03:38.820","Text":"designation, I’ll uncheck full"},{"Start":"03:38.820 ","End":"03:43.050","Text":"length, and I’ll add an offset of 3mm."},{"Start":"03:44.170 ","End":"03:45.940","Text":"Now the reason I added an offset"},{"Start":"03:46.370 ","End":"03:47.420","Text":"is that we’ll want to add a"},{"Start":"03:48.190 ","End":"03:49.419","Text":"chamfer to the end of the thread."},{"Start":"03:50.280 ","End":"03:51.390","Text":"So I’ll click okay to"},{"Start":"03:51.390 ","End":"03:52.909","Text":"exit the thread command."},{"Start":"03:55.489 ","End":"03:56.950","Text":"At this point, I want to add"},{"Start":"03:56.950 ","End":"03:58.760","Text":"a chamfer to the bottom here."},{"Start":"03:59.390 ","End":"04:01.160","Text":"I’ll select chamfer from the modify"},{"Start":"04:01.170 ","End":"04:03.920","Text":"dropdown menu, I’ll select the bottom"},{"Start":"04:03.920 ","End":"04:07.839","Text":"of the cylinder, and I’ll type in 5mm..."},{"Start":"04:07.870 ","End":"04:10.519","Text":"before clicking okay to exit the command."},{"Start":"04:12.190 ","End":"04:14.810","Text":"Now I’ll also add a fillet on top of this"},{"Start":"04:15.260 ","End":"04:17.079","Text":"chamfer to give it a nice smooth edge."},{"Start":"04:17.540 ","End":"04:19.479","Text":"To add the fillet I’ll hit letter “F”"},{"Start":"04:20.119 ","End":"04:20.880","Text":"the keyboard shortcut for fillet and then"},{"Start":"04:20.880 ","End":"04:23.860","Text":"I’ll select this line and type in 2mm."},{"Start":"04:25.309 ","End":"04:26.950","Text":"The last thing we need to do is"},{"Start":"04:26.950 ","End":"04:28.900","Text":"add the “electrical foot contact”"},{"Start":"04:28.959 ","End":"04:30.530","Text":"onto the bottom of the bulb."},{"Start":"04:31.250 ","End":"04:33.090","Text":"I’ll use the cylinder feature once"},{"Start":"04:33.090 ","End":"04:35.030","Text":"again...this time clicking the"},{"Start":"04:35.030 ","End":"04:37.250","Text":"center origin and dragging it out"},{"Start":"04:37.280 ","End":"04:39.429","Text":"until it snaps to just over 10mm."},{"Start":"04:41.270 ","End":"04:43.939","Text":"I’ll go up 2mm for the distance and"},{"Start":"04:43.940 ","End":"04:46.200","Text":"I’ll click okay to exit the command."},{"Start":"04:47.629 ","End":"04:49.920","Text":"Now I’ll activate the chamfer tool once"},{"Start":"04:49.920 ","End":"04:52.930","Text":"again and I’ll add a chamfer of 2mm to"},{"Start":"04:52.930 ","End":"04:55.450","Text":"the “electrical foot contact.” And.."},{"Start":"04:55.450 ","End":"04:56.980","Text":"based on the bulb I’m looking at"},{"Start":"04:57.010 ","End":"04:58.949","Text":"this could be rounded a bit more."},{"Start":"04:59.150 ","End":"05:00.990","Text":"I’ll edit the fillet by double-clicking"},{"Start":"05:00.990 ","End":"05:02.590","Text":"on it in the timeline, and"},{"Start":"05:02.590 ","End":"05:05.170","Text":"I’ll change this fillet to 5mm."},{"Start":"05:06.850 ","End":"05:08.400","Text":"Lastly, I can right-click on"},{"Start":"05:08.400 ","End":"05:10.300","Text":"the bulb and select appearances."},{"Start":"05:10.300 ","End":"05:11.820","Text":"And I’ll simply find a plastic"},{"Start":"05:11.820 ","End":"05:13.159","Text":"appearance for the middle part…."},{"Start":"05:21.290 ","End":"05:23.190","Text":"and I’ll drag and drop an aluminum"},{"Start":"05:23.190 ","End":"05:25.099","Text":"appearance for the threaded bottom."}],"ID":28992},{"Watched":false,"Name":"Day 10 - 3D Model an iPhone Case","Duration":"10m 54s","ChapterTopicVideoID":27790,"CourseChapterTopicPlaylistID":275347,"HasSubtitles":true,"ThumbnailPath":null,"UploadDate":null,"DurationForVideoObject":null,"Description":null,"MetaTitle":null,"MetaDescription":null,"Canonical":null,"VideoComments":[],"Subtitles":[{"Start":"00:00.080 ","End":"00:00.520","Text":"Kevin Kennedy: Hey there,"},{"Start":"00:00.530 ","End":"00:01.490","Text":"It’s Kevin Kennedy."},{"Start":"00:01.660 ","End":"00:03.869","Text":"Welcome to Day #10 of Learn"},{"Start":"00:03.880 ","End":"00:05.920","Text":"Fusion 360 in 30 days."},{"Start":"00:06.520 ","End":"00:07.989","Text":"By the end of this tutorial,"},{"Start":"00:08.029 ","End":"00:09.569","Text":"you’ll be able to 3D model a"},{"Start":"00:09.570 ","End":"00:11.530","Text":"phone case for 3D printing."},{"Start":"00:11.920 ","End":"00:13.750","Text":"You’ll learn how to: upload files,"},{"Start":"00:13.860 ","End":"00:16.110","Text":"how to use the extend sketch feature,"},{"Start":"00:16.420 ","End":"00:18.570","Text":"how to project a sketch, and how to"},{"Start":"00:18.600 ","End":"00:21.520","Text":"export your .STL file for 3D printing."},{"Start":"00:21.700 ","End":"00:23.250","Text":"Before we get started, we’ll"},{"Start":"00:23.250 ","End":"00:24.320","Text":"want to make sure that our"},{"Start":"00:24.320 ","End":"00:26.850","Text":"document settings are set to mm."},{"Start":"00:27.280 ","End":"00:28.719","Text":"If they’re not you can click on"},{"Start":"00:28.719 ","End":"00:30.399","Text":"the “change active units” icon"},{"Start":"00:30.460 ","End":"00:32.130","Text":"under the document settings and"},{"Start":"00:32.130 ","End":"00:34.370","Text":"select mm from the dropdown list."},{"Start":"00:35.480 ","End":"00:37.140","Text":"Now, I’m going to import an"},{"Start":"00:37.150 ","End":"00:38.879","Text":"iPhone X for this demo, which"},{"Start":"00:38.880 ","End":"00:40.510","Text":"I’ve linked up in the description."},{"Start":"00:40.950 ","End":"00:42.570","Text":"If you have a different phone you can"},{"Start":"00:42.580 ","End":"00:44.260","Text":"import the phone of your choice, and"},{"Start":"00:44.260 ","End":"00:46.859","Text":"follow the same steps in this tutorial, as"},{"Start":"00:46.860 ","End":"00:49.400","Text":"there are plenty of free CAD files online."},{"Start":"00:50.370 ","End":"00:52.270","Text":"I double-checked the dimension of this"},{"Start":"00:52.270 ","End":"00:54.159","Text":"model and I’m going to import it because"},{"Start":"00:54.160 ","End":"00:56.680","Text":"it will save time and I can be more"},{"Start":"00:56.680 ","End":"00:59.170","Text":"focused on the design of my phone case and"},{"Start":"00:59.170 ","End":"01:01.450","Text":"less worried about the overall dimensions."},{"Start":"01:02.400 ","End":"01:04.709","Text":"To import the file I’ll open up the data"},{"Start":"01:04.710 ","End":"01:07.100","Text":"panel, click the blue upload button,"},{"Start":"01:07.490 ","End":"01:09.560","Text":"and select the file from my computer."},{"Start":"01:10.709 ","End":"01:12.390","Text":"After the file has successfully"},{"Start":"01:12.560 ","End":"01:13.890","Text":"uploaded we can double click"},{"Start":"01:13.890 ","End":"01:15.650","Text":"on it to open up the file."},{"Start":"01:16.610 ","End":"01:18.050","Text":"Now an important step here"},{"Start":"01:18.050 ","End":"01:19.380","Text":"that you don’t want to miss."},{"Start":"01:19.450 ","End":"01:21.400","Text":"Before we start modeling anything"},{"Start":"01:21.400 ","End":"01:22.599","Text":"we’ll want to right-click on"},{"Start":"01:22.599 ","End":"01:25.220","Text":"the root of the browser tree and"},{"Start":"01:25.220 ","End":"01:27.500","Text":"choose “Capture Design History” to"},{"Start":"01:27.500 ","End":"01:29.759","Text":"convert to a history-based design."},{"Start":"01:30.680 ","End":"01:32.750","Text":"If we didn’t do this you wouldn’t"},{"Start":"01:32.750 ","End":"01:35.570","Text":"see a timeline down here, as imported"},{"Start":"01:35.570 ","End":"01:38.039","Text":"models in Fusion are treated as direct"},{"Start":"01:38.059 ","End":"01:40.830","Text":"modeling...not history-based design."},{"Start":"01:42.050 ","End":"01:44.529","Text":"Now a phone case can seem pretty complex"},{"Start":"01:44.570 ","End":"01:46.449","Text":"but we’ll break it down step by step,"},{"Start":"01:46.490 ","End":"01:48.649","Text":"making it into achievable chunks."},{"Start":"01:49.180 ","End":"01:50.530","Text":"So the first thing that I want to"},{"Start":"01:50.530 ","End":"01:53.039","Text":"do is create a band that follows"},{"Start":"01:53.040 ","End":"01:54.820","Text":"around the outside shape here…"},{"Start":"01:55.270 ","End":"01:57.330","Text":"and I’m not worried about all"},{"Start":"01:57.330 ","End":"01:58.360","Text":"the button cutouts at this point."},{"Start":"01:59.480 ","End":"02:01.229","Text":"I’ll create a new sketch on the XY"},{"Start":"02:01.240 ","End":"02:02.879","Text":"plane, and I’ll activate the spline"},{"Start":"02:03.200 ","End":"02:05.479","Text":"command from the sketch dropdown menu."},{"Start":"02:06.540 ","End":"02:07.940","Text":"Now I’m just going to copy this"},{"Start":"02:07.950 ","End":"02:09.699","Text":"curved shape of the iPhone here,"},{"Start":"02:10.039 ","End":"02:11.609","Text":"and I’ll drag around the spline"},{"Start":"02:11.620 ","End":"02:13.500","Text":"handles until it looks right."},{"Start":"02:16.530 ","End":"02:18.120","Text":"Now we’ll want to create the thickness"},{"Start":"02:18.130 ","End":"02:19.960","Text":"of the case before we go ahead and"},{"Start":"02:19.960 ","End":"02:21.649","Text":"sweep this shape around the phone."},{"Start":"02:22.199 ","End":"02:23.640","Text":"To do this, I’ll hit letter"},{"Start":"02:23.709 ","End":"02:25.429","Text":"“O,” the keyboard shortcut for"},{"Start":"02:25.470 ","End":"02:28.440","Text":"offset, and I’ll punch in 2mm"},{"Start":"02:28.450 ","End":"02:30.530","Text":"for the dimension and hit okay."},{"Start":"02:30.990 ","End":"02:32.550","Text":"You can punch in whatever dimension"},{"Start":"02:32.550 ","End":"02:35.100","Text":"you’d like, but I’ve found 2mm works"},{"Start":"02:35.110 ","End":"02:37.520","Text":"pretty well for 3D printed phone cases."},{"Start":"02:38.179 ","End":"02:39.980","Text":"Now, I’ll have to close this shape"},{"Start":"02:39.980 ","End":"02:42.229","Text":"off, because we need a closed profile"},{"Start":"02:42.260 ","End":"02:44.299","Text":"in order to sweep it along a path."},{"Start":"02:44.830 ","End":"02:47.070","Text":"I’ll hit the keyboard shortcut letter “L”"},{"Start":"02:47.090 ","End":"02:49.780","Text":"for line and I’ll draw two vertical lines,"},{"Start":"02:50.040 ","End":"02:52.420","Text":"one on the top and one on the bottom."},{"Start":"02:52.860 ","End":"02:54.910","Text":"Then I’ll select “extend” from the"},{"Start":"02:54.910 ","End":"02:57.150","Text":"sketch dropdown menu and I’ll extend"},{"Start":"02:57.150 ","End":"02:59.159","Text":"both of these lines by selecting them."},{"Start":"03:00.219 ","End":"03:02.470","Text":"And before we move on I’ll hit letter"},{"Start":"03:02.490 ","End":"03:04.530","Text":"“T” to activate the trim tool and I’ll"},{"Start":"03:04.530 ","End":"03:06.750","Text":"go ahead and trim the excess lines away."},{"Start":"03:08.880 ","End":"03:10.840","Text":"Now we can sweep this profile around"},{"Start":"03:10.840 ","End":"03:12.120","Text":"the outside of the phone by activating"},{"Start":"03:12.809 ","End":"03:15.020","Text":"“sweep” from the create drop-down menu."},{"Start":"03:15.950 ","End":"03:17.820","Text":"Then, I’ll select the profile shape"},{"Start":"03:17.940 ","End":"03:19.630","Text":"we just created, and I’ll select"},{"Start":"03:19.640 ","End":"03:21.820","Text":"each line here of the phone model"},{"Start":"03:22.030 ","End":"03:23.840","Text":"until it follows the path all"},{"Start":"03:23.840 ","End":"03:25.520","Text":"the way around to the other end."},{"Start":"03:32.020 ","End":"03:33.360","Text":"Alrighty, so now that we have the basic"},{"Start":"03:33.360 ","End":"03:34.960","Text":"bumper of the phone case, we’ll want"},{"Start":"03:34.960 ","End":"03:36.940","Text":"to cut out the holes for the buttons."},{"Start":"03:37.510 ","End":"03:39.290","Text":"I’ll go ahead and select the sweep"},{"Start":"03:39.300 ","End":"03:41.030","Text":"that we just created and I’ll hit"},{"Start":"03:41.030 ","End":"03:43.609","Text":"the keyboard letter “V” which is the"},{"Start":"03:43.610 ","End":"03:46.140","Text":"shortcut to view or hide objects."},{"Start":"03:48.980 ","End":"03:50.759","Text":"Then, I’ll create a new sketch off"},{"Start":"03:50.759 ","End":"03:54.010","Text":"the buttons here, and I’ll activate"},{"Start":"03:54.010 ","End":"03:55.730","Text":"the rectangle tool with the keyboard"},{"Start":"03:55.730 ","End":"03:59.680","Text":"shortcut letter “R.” I’m just going to"},{"Start":"03:59.680 ","End":"04:02.060","Text":"drag over all the buttons, and then I’ll"},{"Start":"04:02.060 ","End":"04:04.279","Text":"hit letter “S” to bring up the sketch"},{"Start":"04:04.290 ","End":"04:06.899","Text":"search box, and I’ll type in fillet."},{"Start":"04:07.380 ","End":"04:09.080","Text":"I’ll select the sketch fillet here,"},{"Start":"04:09.380 ","End":"04:11.260","Text":"not to be confused with the modify"},{"Start":"04:11.260 ","End":"04:13.200","Text":"fillet command, and I’ll add a"},{"Start":"04:13.540 ","End":"04:16.539","Text":"fillet of 1.5mm to each corner."},{"Start":"04:17.610 ","End":"04:19.500","Text":"Now that we have the shape to cut out"},{"Start":"04:19.700 ","End":"04:21.459","Text":"we’ll activate the extrude command by"},{"Start":"04:21.459 ","End":"04:23.220","Text":"hitting letter “E” on the keyboard."},{"Start":"04:24.530 ","End":"04:26.349","Text":"I’ll select the profile shapes here"},{"Start":"04:26.469 ","End":"04:28.360","Text":"and I’ll change the direction to “two"},{"Start":"04:28.360 ","End":"04:31.130","Text":"sides.” I’m just going to drag both"},{"Start":"04:31.130 ","End":"04:32.620","Text":"arrows out a ways, making sure they are"},{"Start":"04:32.620 ","End":"04:34.680","Text":"far enough to cut through the phone case."},{"Start":"04:35.230 ","End":"04:37.160","Text":"I’ll click “okay” on the extrude dialogue"},{"Start":"04:37.170 ","End":"04:39.040","Text":"box and I’ll click the light bulb to"},{"Start":"04:39.040 ","End":"04:40.960","Text":"turn the phone case shape back on."},{"Start":"04:42.110 ","End":"04:43.799","Text":"Now looking at the phone case we’ll see"},{"Start":"04:43.799 ","End":"04:45.830","Text":"that we didn’t actually cut through it,"},{"Start":"04:45.870 ","End":"04:47.949","Text":"and we messed up our iPhone model here."},{"Start":"04:48.670 ","End":"04:50.500","Text":"I want to show you guys a cool"},{"Start":"04:50.500 ","End":"04:52.020","Text":"feature that is often overlooked"},{"Start":"04:52.020 ","End":"04:53.380","Text":"with the extrude cut command."},{"Start":"04:53.970 ","End":"04:55.729","Text":"If we double click on the extrude command"},{"Start":"04:55.740 ","End":"04:57.270","Text":"to open it back up, we’ll see at the"},{"Start":"04:57.280 ","End":"04:59.589","Text":"bottom of the extrude dialogue box we can"},{"Start":"05:00.740 ","End":"05:04.870","Text":"select or deselect “objects to cut.” To"},{"Start":"05:04.870 ","End":"05:06.389","Text":"fix our phone here, we’ll want to unselect"},{"Start":"05:07.260 ","End":"05:10.159","Text":"all bodies of the phone, and we’ll need"},{"Start":"05:10.160 ","End":"05:12.210","Text":"to select the one body of our phone"},{"Start":"05:12.210 ","End":"05:14.960","Text":"case, and we’ll click okay to exit the"},{"Start":"05:14.960 ","End":"05:16.870","Text":"command and take a look at the results."},{"Start":"05:18.440 ","End":"05:20.260","Text":"At this point, I’m going to do the same"},{"Start":"05:20.260 ","End":"05:22.170","Text":"exact steps to the button on the other"},{"Start":"05:22.170 ","End":"05:24.749","Text":"side here… and I’m going to speed up"},{"Start":"05:24.749 ","End":"05:26.610","Text":"the screencast for the sake of time…"},{"Start":"05:32.000 ","End":"05:33.760","Text":"In its current state you could leave"},{"Start":"05:33.760 ","End":"05:35.200","Text":"the phone case at this, creating"},{"Start":"05:35.200 ","End":"05:37.060","Text":"a nice minimal bumper-like phone"},{"Start":"05:37.060 ","End":"05:39.569","Text":"case OR we can continue on by"},{"Start":"05:39.570 ","End":"05:41.190","Text":"making the back of the phone case."},{"Start":"05:42.639 ","End":"05:43.909","Text":"To create the back I’ll look"},{"Start":"05:43.910 ","End":"05:45.140","Text":"at the bottom of the case."},{"Start":"05:45.780 ","End":"05:47.770","Text":"Now we’ll want to add a solid back"},{"Start":"05:47.820 ","End":"05:49.590","Text":"so I’ll create a construction plane"},{"Start":"05:49.590 ","End":"05:51.360","Text":"through two edges, by selecting it"},{"Start":"05:51.370 ","End":"05:53.160","Text":"from the construct dropdown menu."},{"Start":"05:54.099 ","End":"05:56.060","Text":"I’ll simply select one edge and then"},{"Start":"05:56.070 ","End":"05:58.090","Text":"the opposite edge, and you’ll notice"},{"Start":"05:58.090 ","End":"06:00.470","Text":"the plane is created… and I’ll click"},{"Start":"06:00.470 ","End":"06:02.930","Text":"okay to exit the plane dialogue box."},{"Start":"06:04.050 ","End":"06:05.850","Text":"Now we’ll create a new sketch by"},{"Start":"06:05.850 ","End":"06:07.530","Text":"right-clicking on the plane and select"},{"Start":"06:07.530 ","End":"06:10.840","Text":"“create new sketch.” I want to reference"},{"Start":"06:10.840 ","End":"06:12.540","Text":"the phone shape that we already have,"},{"Start":"06:12.550 ","End":"06:14.450","Text":"so I’ll select all of the lines here"},{"Start":"06:14.469 ","End":"06:15.929","Text":"while holding down the shift key."},{"Start":"06:17.359 ","End":"06:19.669","Text":"Once all of the lines on top are selected"},{"Start":"06:19.710 ","End":"06:21.640","Text":"I’ll turn them into sketches by going"},{"Start":"06:21.640 ","End":"06:23.960","Text":"to project under the sketch dropdown"},{"Start":"06:24.190 ","End":"06:26.990","Text":"menu, or by hitting the keyboard shortcut"},{"Start":"06:27.059 ","End":"06:28.027","Text":"letter “P.” And you’ll see here that"},{"Start":"06:28.027 ","End":"06:28.275","Text":"because the lines are closed they were"},{"Start":"06:28.275 ","End":"06:28.523","Text":"turned into profiles, and I can activate"},{"Start":"06:28.523 ","End":"06:28.736","Text":"the extrude command and extrude this"},{"Start":"06:28.736 ","End":"06:28.984","Text":"2mm, matching the thickness of the case."},{"Start":"06:29.020 ","End":"06:30.940","Text":"And for some reason here the project"},{"Start":"06:30.940 ","End":"06:32.479","Text":"sketch didn’t work, so I’ll go"},{"Start":"06:32.490 ","End":"06:34.249","Text":"back around making sure that I"},{"Start":"06:34.250 ","End":"06:36.376","Text":"have all of the lines selected."},{"Start":"06:36.600 ","End":"06:38.270","Text":"Now as soon as we see that orange"},{"Start":"06:38.270 ","End":"06:40.230","Text":"tint we know our profile shape is"},{"Start":"06:40.230 ","End":"06:42.219","Text":"closed and I can hit letter “E”"},{"Start":"06:42.440 ","End":"06:44.260","Text":"to activate the extrude command."},{"Start":"06:45.300 ","End":"06:47.609","Text":"I’ll extrude this down 2mm,"},{"Start":"06:47.719 ","End":"06:49.280","Text":"making sure that I don’t forget"},{"Start":"06:49.280 ","End":"06:51.559","Text":"to select “join” as the operation."},{"Start":"06:58.120 ","End":"06:59.670","Text":"Now that we have the button cutouts"},{"Start":"06:59.670 ","End":"07:01.090","Text":"on each side, we’ll want to make"},{"Start":"07:01.090 ","End":"07:02.770","Text":"a cutout for the bottom where the"},{"Start":"07:02.770 ","End":"07:04.700","Text":"charging port and speakers are."},{"Start":"07:05.520 ","End":"07:07.530","Text":"I select the case, and hit keyboard"},{"Start":"07:07.530 ","End":"07:09.980","Text":"shortcut letter “V” once again to hide"},{"Start":"07:09.980 ","End":"07:12.620","Text":"it, and then I’ll re-show the phone."},{"Start":"07:13.220 ","End":"07:14.680","Text":"Then I’ll create a new"},{"Start":"07:14.680 ","End":"07:16.150","Text":"sketch off the bottom here."},{"Start":"07:16.870 ","End":"07:18.440","Text":"This time, I’m just going to use the"},{"Start":"07:18.440 ","End":"07:21.030","Text":"line command to create an angled cut out."},{"Start":"07:21.610 ","End":"07:24.460","Text":"I’ll draw a line on the left side, and"},{"Start":"07:24.460 ","End":"07:25.730","Text":"then I’ll draw a line down from the"},{"Start":"07:25.740 ","End":"07:27.569","Text":"middle, which I’ll make a construction"},{"Start":"07:27.570 ","End":"07:29.600","Text":"line with the keyboard shortcut letter"},{"Start":"07:29.750 ","End":"07:33.420","Text":"“X.” Now I’ll use the mirror sketch"},{"Start":"07:33.430 ","End":"07:35.650","Text":"command to make sure I have the same angle"},{"Start":"07:35.660 ","End":"07:37.950","Text":"on the other side, and then I’ll connect"},{"Start":"07:37.950 ","End":"07:40.680","Text":"the lines on both the top and the bottom."},{"Start":"07:47.789 ","End":"07:49.790","Text":"I’ll hit the letter “E” to extrude"},{"Start":"07:49.890 ","End":"07:50.905","Text":"and I’ll select the profiles"},{"Start":"07:51.170 ","End":"07:52.560","Text":"here that I want to cut out."},{"Start":"07:55.960 ","End":"07:57.340","Text":"Once again I’ll make sure this"},{"Start":"07:57.349 ","End":"07:59.269","Text":"is multi-directional, and that"},{"Start":"07:59.300 ","End":"08:01.190","Text":"the operation is set to cut."},{"Start":"08:01.990 ","End":"08:03.730","Text":"I’ll click okay, re-show the phone"},{"Start":"08:03.730 ","End":"08:05.169","Text":"case, and double click on the"},{"Start":"08:05.180 ","End":"08:07.099","Text":"latest extrude in the timeline."},{"Start":"08:07.790 ","End":"08:08.990","Text":"I’ll want to make sure that the"},{"Start":"08:08.990 ","End":"08:11.410","Text":"phone case is the only body selected"},{"Start":"08:11.450 ","End":"08:13.560","Text":"under the “operations to cut” list."},{"Start":"08:15.690 ","End":"08:18.030","Text":"Now because I added a back I’ll also"},{"Start":"08:18.030 ","End":"08:19.920","Text":"need to cut out the hole for the camera."},{"Start":"08:20.299 ","End":"08:21.569","Text":"I’ll hit the keyboard shortcut"},{"Start":"08:21.570 ","End":"08:23.129","Text":"letter “C” to create a center"},{"Start":"08:23.129 ","End":"08:24.759","Text":"circle on top of the camera."},{"Start":"08:25.300 ","End":"08:27.140","Text":"And then I’ll create a second one."},{"Start":"08:28.110 ","End":"08:30.080","Text":"Now I’ll hit letter “D” on the keyboard"},{"Start":"08:30.080 ","End":"08:35.930","Text":"to dimension them 13mm each and then"},{"Start":"08:35.930 ","End":"08:37.740","Text":"I’ll hit letter “L” to connect them"},{"Start":"08:37.740 ","End":"08:40.280","Text":"with tangent lines, so you should"},{"Start":"08:40.280 ","End":"08:42.359","Text":"see the little tangent icon show up."},{"Start":"08:44.680 ","End":"08:47.070","Text":"Next, I’ll activate the trim feature with"},{"Start":"08:47.070 ","End":"08:49.130","Text":"letter “T” and I’ll trim out all these"},{"Start":"08:49.180 ","End":"08:52.370","Text":"unnecessary lines… then I’ll go ahead"},{"Start":"08:52.400 ","End":"08:54.140","Text":"and do the same steps we’ve been doing"},{"Start":"08:54.150 ","End":"08:56.089","Text":"by extrude cutting this hole out of the"},{"Start":"08:56.090 ","End":"08:58.829","Text":"phone case and not the phone itself."},{"Start":"09:04.810 ","End":"09:06.480","Text":"Now at this point you could essentially"},{"Start":"09:06.480 ","End":"09:09.140","Text":"be done, BUT this is also where you"},{"Start":"09:09.140 ","End":"09:10.949","Text":"can get really creative and insert"},{"Start":"09:11.020 ","End":"09:13.920","Text":"an svg with a logo, maybe add some"},{"Start":"09:13.920 ","End":"09:16.590","Text":"text, or you can create a pattern"},{"Start":"09:16.590 ","End":"09:17.899","Text":"for the back of your phone case."},{"Start":"09:19.189 ","End":"09:20.670","Text":"I’m going to insert an svg"},{"Start":"09:20.670 ","End":"09:21.830","Text":"pattern that I created."},{"Start":"09:22.450 ","End":"09:23.750","Text":"If you’d like to use the same"},{"Start":"09:23.750 ","End":"09:25.160","Text":"pattern I’ll put a link to it"},{"Start":"09:25.160 ","End":"09:26.870","Text":"below in the video description."},{"Start":"09:28.020 ","End":"09:30.240","Text":"I’ll go to insert and select “insert"},{"Start":"09:30.290 ","End":"09:32.840","Text":"svg.” and I’ll select the back"},{"Start":"09:32.849 ","End":"09:34.460","Text":"of the phone case as the plane."},{"Start":"09:35.869 ","End":"09:37.660","Text":"I’ll just re-size the pattern here"},{"Start":"09:37.670 ","End":"09:39.210","Text":"and move it around until it looks"},{"Start":"09:39.210 ","End":"09:40.730","Text":"like it\u0027s in the right position."},{"Start":"09:43.930 ","End":"09:46.270","Text":"Once the pattern is in place I can drag"},{"Start":"09:46.270 ","End":"09:48.399","Text":"over the entire pattern to select all"},{"Start":"09:48.400 ","End":"09:50.510","Text":"of the profiles, and I’ll hit letter"},{"Start":"09:50.559 ","End":"09:52.660","Text":"“E” on the keyboard to extrude cut them."},{"Start":"09:54.010 ","End":"09:55.450","Text":"I’ll drag the arrow down to"},{"Start":"09:55.450 ","End":"09:56.829","Text":"make sure it\u0027s cut all the way"},{"Start":"09:56.830 ","End":"09:58.620","Text":"through and I’ll click “okay.”"},{"Start":"10:02.480 ","End":"10:04.339","Text":"At this point, we’re just about done…"},{"Start":"10:04.710 ","End":"10:06.390","Text":"the last thing that I would recommend"},{"Start":"10:06.390 ","End":"10:08.680","Text":"here is to add some nice rounded"},{"Start":"10:08.700 ","End":"10:10.919","Text":"edges to all of our outside borders."},{"Start":"10:13.709 ","End":"10:15.230","Text":"So I’ll select “fillet” from the"},{"Start":"10:15.230 ","End":"10:17.340","Text":"modify dropdown menu, and I’ll add"},{"Start":"10:17.340 ","End":"10:20.290","Text":"a fillet of 1mm to all these edges."},{"Start":"10:28.320 ","End":"10:29.939","Text":"And then I’ll go ahead and do the same"},{"Start":"10:29.940 ","End":"10:32.350","Text":"thing around the button and camera holes."},{"Start":"10:35.370 ","End":"10:36.845","Text":"If you’re looking to export this for"},{"Start":"10:36.845 ","End":"10:38.730","Text":"3D printing you can right-click on"},{"Start":"10:38.730 ","End":"10:40.469","Text":"the phone case body in the browser"},{"Start":"10:40.469 ","End":"10:44.680","Text":"tree, select “Save as STL” and save"},{"Start":"10:44.690 ","End":"10:47.660","Text":"the file OR you can also export it"},{"Start":"10:47.660 ","End":"10:49.969","Text":"directly to your 3D printing software."}],"ID":28993},{"Watched":false,"Name":"Day 11 - 3D Model a Dog Bowl","Duration":"9m 45s","ChapterTopicVideoID":27791,"CourseChapterTopicPlaylistID":275347,"HasSubtitles":true,"ThumbnailPath":null,"UploadDate":null,"DurationForVideoObject":null,"Description":null,"MetaTitle":null,"MetaDescription":null,"Canonical":null,"VideoComments":[],"Subtitles":[{"Start":"00:00.060 ","End":"00:00.650","Text":"Kevin Kennedy: Hey there, It’s"},{"Start":"00:00.650 ","End":"00:02.720","Text":"Kevin Kennedy, and welcome to Day"},{"Start":"00:02.720 ","End":"00:06.120","Text":"#11 of Learn Fusion 360 in 30 days."},{"Start":"00:06.730 ","End":"00:08.550","Text":"By the end of this tutorial, you’ll"},{"Start":"00:08.550 ","End":"00:10.810","Text":"be able to 3D model a dog bowl."},{"Start":"00:11.280 ","End":"00:13.100","Text":"We’ll take another look at the revolve"},{"Start":"00:13.110 ","End":"00:15.549","Text":"feature and you’ll also learn how to: set"},{"Start":"00:15.549 ","End":"00:19.069","Text":"constraints, lock in sketch lines, look"},{"Start":"00:19.070 ","End":"00:22.300","Text":"at the section analysis, and offset and"},{"Start":"00:22.320 ","End":"00:25.010","Text":"thicken surfaces in the patch workspace."},{"Start":"00:25.440 ","End":"00:27.140","Text":"To get started, we’ll insert a"},{"Start":"00:27.140 ","End":"00:28.980","Text":"reference image, which I’ve attached"},{"Start":"00:28.980 ","End":"00:30.700","Text":"below in the video description."},{"Start":"00:31.450 ","End":"00:33.179","Text":"The reference image is half of the"},{"Start":"00:33.179 ","End":"00:35.120","Text":"dog bowl because we’ll use the revolve"},{"Start":"00:35.129 ","End":"00:37.140","Text":"feature to create the rest of the shape."},{"Start":"00:38.250 ","End":"00:40.390","Text":"I’ll select “attached canvas” from"},{"Start":"00:40.390 ","End":"00:42.610","Text":"the “insert” dropdown list, I’ll"},{"Start":"00:42.610 ","End":"00:45.140","Text":"select the front plane, and then I’ll"},{"Start":"00:45.140 ","End":"00:47.150","Text":"select the image from my computer."},{"Start":"00:48.200 ","End":"00:50.260","Text":"I’ll go ahead and rotate this around,"},{"Start":"00:50.290 ","End":"00:52.159","Text":"making sure it\u0027s the right side up,"},{"Start":"00:52.500 ","End":"00:55.640","Text":"and I’ll also set the opacity to 15%."},{"Start":"00:57.180 ","End":"00:59.110","Text":"After clicking okay, we’ll want to"},{"Start":"00:59.110 ","End":"01:01.190","Text":"calibrate the image size, so it’s"},{"Start":"01:01.200 ","End":"01:03.089","Text":"the same as our reference dimensions."},{"Start":"01:04.030 ","End":"01:05.809","Text":"I’ll open the canvases folder,"},{"Start":"01:06.340 ","End":"01:08.450","Text":"right-click on the image, and select"},{"Start":"01:08.509 ","End":"01:11.330","Text":"“calibrate.” Then, I’ll click at the"},{"Start":"01:11.340 ","End":"01:14.680","Text":"left of our 100mm mark, I’ll click"},{"Start":"01:14.680 ","End":"01:18.059","Text":"at the right, and I’ll type in 100mm."},{"Start":"01:19.070 ","End":"01:20.440","Text":"Now after hitting enter you’ll"},{"Start":"01:20.440 ","End":"01:22.060","Text":"see that the image was resized"},{"Start":"01:22.070 ","End":"01:23.579","Text":"to the same dimensions as"},{"Start":"01:23.610 ","End":"01:25.589","Text":"outlined on our reference image."},{"Start":"01:27.250 ","End":"01:28.749","Text":"Now before we start drawing our"},{"Start":"01:28.750 ","End":"01:30.219","Text":"sketch, I’ll double click on the"},{"Start":"01:30.220 ","End":"01:31.870","Text":"reference image in the timeline to"},{"Start":"01:31.870 ","End":"01:34.690","Text":"re-open it… and I’ll click and hold on"},{"Start":"01:34.690 ","End":"01:36.520","Text":"the square in the middle, which will"},{"Start":"01:36.520 ","End":"01:38.639","Text":"allow me to freely drag it around."},{"Start":"01:39.770 ","End":"01:41.280","Text":"To make things even easier for"},{"Start":"01:41.280 ","End":"01:43.090","Text":"us we’ll drag this around so the"},{"Start":"01:43.099 ","End":"01:45.320","Text":"center origin of our reference image"},{"Start":"01:45.599 ","End":"01:47.250","Text":"lines up with our center origin"},{"Start":"01:47.250 ","End":"01:49.520","Text":"point and then we’ll click “okay.”"},{"Start":"01:50.530 ","End":"01:52.510","Text":"At this point, we’ll go ahead and start"},{"Start":"01:52.520 ","End":"01:54.310","Text":"drawing the outline of the dog bowl."},{"Start":"01:54.870 ","End":"01:56.570","Text":"I’ll start off by hitting the keyboard"},{"Start":"01:56.570 ","End":"01:58.950","Text":"shortcut letter “L” to activate the line"},{"Start":"01:58.950 ","End":"02:01.589","Text":"command, and I’ll click on the front face."},{"Start":"02:02.349 ","End":"02:03.990","Text":"Then, I’ll select the origin"},{"Start":"02:03.990 ","End":"02:06.159","Text":"point and I’ll drag it over to the"},{"Start":"02:06.160 ","End":"02:08.970","Text":"right, making this line 100mm long."},{"Start":"02:10.080 ","End":"02:13.120","Text":"I’ll make this vertical line 2.5mm,"},{"Start":"02:13.480 ","End":"02:15.329","Text":"hit the tab key to lock the dimension"},{"Start":"02:15.330 ","End":"02:17.130","Text":"in place, and then I’ll create"},{"Start":"02:17.170 ","End":"02:19.809","Text":"another line 10mm to the left."},{"Start":"02:22.219 ","End":"02:23.999","Text":"For the next line I’ll type in"},{"Start":"02:24.000 ","End":"02:27.370","Text":"55mm, hit the tab key, and then I’ll"},{"Start":"02:27.370 ","End":"02:29.820","Text":"type in 100 degrees for the angle."},{"Start":"02:30.140 ","End":"02:31.690","Text":"I’ll hit the tab key to lock the"},{"Start":"02:31.690 ","End":"02:33.910","Text":"angle in place as well, allowing"},{"Start":"02:33.910 ","End":"02:35.589","Text":"me to click anywhere without"},{"Start":"02:35.590 ","End":"02:37.939","Text":"throwing the dimensions off."},{"Start":"02:38.130 ","End":"02:39.849","Text":"The next line I’ll go over to the"},{"Start":"02:39.849 ","End":"02:43.160","Text":"left 15mm and then this line heading"},{"Start":"02:43.160 ","End":"02:45.050","Text":"downwards I don’t know the length,"},{"Start":"02:45.060 ","End":"02:47.530","Text":"but I know it\u0027s 100 degrees from the"},{"Start":"02:47.530 ","End":"02:50.479","Text":"horizontal line… so I’ll enter 100"},{"Start":"02:50.480 ","End":"02:53.320","Text":"degrees, hit the tab key to lock it in"},{"Start":"02:53.320 ","End":"02:56.019","Text":"place, and then I’ll select down here."},{"Start":"02:57.719 ","End":"03:00.210","Text":"I’ll hit escape and then I’ll reactivate"},{"Start":"03:00.210 ","End":"03:02.660","Text":"line with letter “L” and I’ll create"},{"Start":"03:02.670 ","End":"03:04.780","Text":"the 10mm vertical line from the"},{"Start":"03:04.780 ","End":"03:07.220","Text":"center origin and then I’ll create"},{"Start":"03:07.220 ","End":"03:09.240","Text":"the last line here which will close"},{"Start":"03:09.240 ","End":"03:11.690","Text":"off our profile shape, so you’ll see"},{"Start":"03:11.690 ","End":"03:13.540","Text":"that after I selected where the lines"},{"Start":"03:13.540 ","End":"03:16.009","Text":"meet, the profile shape turned orange,"},{"Start":"03:16.020 ","End":"03:18.949","Text":"signifying that it’s properly closed."},{"Start":"03:20.740 ","End":"03:22.530","Text":"Now before we start adding fillets"},{"Start":"03:22.700 ","End":"03:25.020","Text":"there are a few things we’ll want to do."},{"Start":"03:25.930 ","End":"03:27.410","Text":"First, let’s go ahead and activate"},{"Start":"03:27.410 ","End":"03:29.110","Text":"the trim tool by hitting letter “T”"},{"Start":"03:29.110 ","End":"03:30.640","Text":"on the keyboard, and we’ll click on"},{"Start":"03:30.640 ","End":"03:32.410","Text":"this extra part of the line here so it"},{"Start":"03:32.410 ","End":"03:35.230","Text":"doesn’t mess up any of our fillets… and"},{"Start":"03:35.230 ","End":"03:37.320","Text":"I’ll hit escape to exit the trim tool."},{"Start":"03:38.760 ","End":"03:39.980","Text":"Now at this point, we’ll want to"},{"Start":"03:40.000 ","End":"03:41.480","Text":"add constraints to some of the"},{"Start":"03:41.480 ","End":"03:43.440","Text":"lines, making sure that our overall"},{"Start":"03:43.440 ","End":"03:45.040","Text":"profile shape doesn’t get messed"},{"Start":"03:45.040 ","End":"03:47.110","Text":"up when we go to add fillets."},{"Start":"03:48.469 ","End":"03:50.149","Text":"If we look at some of these icons"},{"Start":"03:50.170 ","End":"03:51.519","Text":"and click on them we’ll see that"},{"Start":"03:51.520 ","End":"03:53.739","Text":"we already have a horizontal and"},{"Start":"03:54.029 ","End":"03:55.780","Text":"some perpendicular constraints."},{"Start":"03:57.060 ","End":"03:58.540","Text":"I’ll add a few more constraints"},{"Start":"03:58.540 ","End":"03:59.980","Text":"by right-clicking on the line"},{"Start":"04:00.080 ","End":"04:01.730","Text":"and selecting horizontal."},{"Start":"04:04.770 ","End":"04:06.500","Text":"Now before we add the fillets to"},{"Start":"04:06.500 ","End":"04:07.940","Text":"this sketch I’m going click on"},{"Start":"04:07.940 ","End":"04:09.579","Text":"the canvases light bulb to turn"},{"Start":"04:09.580 ","End":"04:11.469","Text":"off the reference image, so it\u0027s"},{"Start":"04:11.509 ","End":"04:13.150","Text":"easier to see what’s going on."},{"Start":"04:14.430 ","End":"04:16.580","Text":"I’m also going add dimensions to"},{"Start":"04:17.930 ","End":"04:19.539","Text":"these two lines so the entire shape"},{"Start":"04:19.539 ","End":"04:21.440","Text":"is dimensioned… and then I’ll activate"},{"Start":"04:21.440 ","End":"04:23.710","Text":"fillet from the sketch drop-down menu."},{"Start":"04:25.290 ","End":"04:26.760","Text":"I’ll select the first corner,"},{"Start":"04:27.339 ","End":"04:29.489","Text":"type in 5mm, and then I’ll"},{"Start":"04:29.490 ","End":"04:31.290","Text":"select these top two corners."},{"Start":"04:32.240 ","End":"04:33.820","Text":"You’ll notice as we added these"},{"Start":"04:33.820 ","End":"04:35.320","Text":"fillets it took away some of"},{"Start":"04:35.320 ","End":"04:36.900","Text":"the constraints and added some"},{"Start":"04:36.900 ","End":"04:38.960","Text":"tangent constraints to our sketch."},{"Start":"04:40.270 ","End":"04:42.090","Text":"I’ll right-click, activate fillet"},{"Start":"04:42.200 ","End":"04:44.529","Text":"once again, and I’ll add a fillet of"},{"Start":"04:44.529 ","End":"04:47.610","Text":"2.5mm to this outer lip of the bowl."},{"Start":"04:47.620 ","End":"04:52.000","Text":"Now before we exit the sketch I’ll"},{"Start":"04:52.000 ","End":"04:54.260","Text":"hover over the entire sketch to select"},{"Start":"04:54.260 ","End":"04:56.539","Text":"everything, and I’ll right-click and"},{"Start":"04:56.540 ","End":"04:59.210","Text":"select “fix/unfix” from the list."},{"Start":"05:00.099 ","End":"05:01.629","Text":"This will lock all the lines of the"},{"Start":"05:01.630 ","End":"05:03.769","Text":"sketch in place, ensuring that we don’t"},{"Start":"05:03.820 ","End":"05:06.240","Text":"accidentally move any lines or change"},{"Start":"05:06.250 ","End":"05:08.910","Text":"any dimensions as we continue to work."},{"Start":"05:11.920 ","End":"05:14.000","Text":"Now you’ll see that some Fusion users"},{"Start":"05:14.000 ","End":"05:15.960","Text":"like to fix lines one by one as they"},{"Start":"05:15.960 ","End":"05:18.939","Text":"draw them, and others like to do entire"},{"Start":"05:18.940 ","End":"05:22.300","Text":"sketches at once… it really just depends"},{"Start":"05:22.320 ","End":"05:24.460","Text":"on your workflow and personal preference,"},{"Start":"05:24.570 ","End":"05:26.320","Text":"but either way, it comes in handy,"},{"Start":"05:26.580 ","End":"05:28.410","Text":"especially if you’re going to be working"},{"Start":"05:28.440 ","End":"05:30.590","Text":"on the same file with someone else."},{"Start":"05:30.600 ","End":"05:34.200","Text":"Now we’ll go ahead and stop the sketch."},{"Start":"05:34.320 ","End":"05:36.100","Text":"And I’ll activate the revolve tool"},{"Start":"05:36.100 ","End":"05:37.860","Text":"from the create drop-down menu."},{"Start":"05:38.910 ","End":"05:40.520","Text":"We’ll select the profile sketch we"},{"Start":"05:40.520 ","End":"05:42.269","Text":"just created, and we’ll select the"},{"Start":"05:42.270 ","End":"05:44.300","Text":"center origin line for the axis."},{"Start":"05:45.400 ","End":"05:46.969","Text":"I’ll change the operation to new"},{"Start":"05:46.990 ","End":"05:48.820","Text":"component, and I’ll click okay."},{"Start":"05:50.270 ","End":"05:51.489","Text":"Now that we have the overall"},{"Start":"05:51.490 ","End":"05:52.820","Text":"shape of the dog bowl we’ll"},{"Start":"05:52.820 ","End":"05:54.500","Text":"need to make the bottom hollow."},{"Start":"05:55.120 ","End":"05:56.800","Text":"To do this I’ll activate the shell"},{"Start":"05:56.800 ","End":"05:58.880","Text":"tool from the modify dropdown list,"},{"Start":"05:59.609 ","End":"06:01.270","Text":"I’ll click on the bottom plane, and"},{"Start":"06:01.270 ","End":"06:03.929","Text":"I’ll type in 2.5mm for the thickness."},{"Start":"06:04.650 ","End":"06:06.560","Text":"And you’ll see that after we click okay"},{"Start":"06:06.590 ","End":"06:09.030","Text":"we’ve created this nice dog bowl shape."},{"Start":"06:11.410 ","End":"06:13.309","Text":"Sometimes when creating models you’ll"},{"Start":"06:13.309 ","End":"06:15.450","Text":"want to take a look at the inside, to"},{"Start":"06:15.450 ","End":"06:17.349","Text":"make sure things are how they should be."},{"Start":"06:18.170 ","End":"06:20.000","Text":"Now I want to double-check that this"},{"Start":"06:20.040 ","End":"06:22.359","Text":"bottom surface is raised off the ground,"},{"Start":"06:22.660 ","End":"06:24.990","Text":"so I’ll select “section analysis” from"},{"Start":"06:24.990 ","End":"06:27.680","Text":"the inspect dropdown menu, I’ll click"},{"Start":"06:27.680 ","End":"06:31.010","Text":"on the YZ plane, and then I’ll hit okay."},{"Start":"06:31.900 ","End":"06:33.184","Text":"You’ll see now we can take a good"},{"Start":"06:33.184 ","End":"06:34.729","Text":"look at the overall shape that"},{"Start":"06:34.730 ","End":"06:36.700","Text":"we created after revolving it."},{"Start":"06:37.570 ","End":"06:39.780","Text":"If I go to the analysis folder"},{"Start":"06:39.790 ","End":"06:41.390","Text":"I can toggle this on and off."},{"Start":"06:45.960 ","End":"06:47.560","Text":"The last thing we’ll want to do is"},{"Start":"06:47.560 ","End":"06:49.300","Text":"create a rubber band that fits around"},{"Start":"06:49.300 ","End":"06:52.450","Text":"the bottom of the bowl, making sure it"},{"Start":"06:52.719 ","End":"06:54.869","Text":"doesn’t scratch any nice wood floors."},{"Start":"06:56.780 ","End":"06:58.440","Text":"So before we do this, I’m going"},{"Start":"06:58.440 ","End":"07:00.070","Text":"to fillet the edges of this outer"},{"Start":"07:00.070 ","End":"07:02.200","Text":"lip, making sure they’re not sharp."},{"Start":"07:02.720 ","End":"07:04.320","Text":"I’ll hit letter “F” on the keyboard"},{"Start":"07:04.320 ","End":"07:05.830","Text":"to select fillet, and then I’ll"},{"Start":"07:05.830 ","End":"07:07.789","Text":"select the top and bottom lines and"},{"Start":"07:07.790 ","End":"07:10.099","Text":"I’ll type in 1mm and click okay."},{"Start":"07:12.240 ","End":"07:13.840","Text":"Now to create the rubber banding"},{"Start":"07:13.890 ","End":"07:15.450","Text":"we’ll go to the patch workspace,"},{"Start":"07:15.610 ","End":"07:17.340","Text":"and I’m going to use offset tool"},{"Start":"07:17.340 ","End":"07:19.110","Text":"from the create dropdown list."},{"Start":"07:20.370 ","End":"07:22.400","Text":"Then, I’ll select the dog bowl as the"},{"Start":"07:22.400 ","End":"07:26.180","Text":"surface, I’ll type in .2mm for the offset"},{"Start":"07:26.180 ","End":"07:28.370","Text":"distance, and I’ll set the operation"},{"Start":"07:28.400 ","End":"07:30.380","Text":"to new component and click okay."},{"Start":"07:31.690 ","End":"07:33.400","Text":"Now it’s a little bit hard to see"},{"Start":"07:33.400 ","End":"07:34.980","Text":"what we just did here, so I’m going"},{"Start":"07:34.980 ","End":"07:37.590","Text":"to re-name the components… I’ll double"},{"Start":"07:37.590 ","End":"07:39.870","Text":"click and make the first one “Dog Bowl”"},{"Start":"07:40.420 ","End":"07:42.370","Text":"and I’ll name the second one “Rubber.”"},{"Start":"07:44.750 ","End":"07:46.780","Text":"I’m going to right-click on the rubber,"},{"Start":"07:46.830 ","End":"07:49.240","Text":"select appearance, and I’ll drag and drop"},{"Start":"07:49.300 ","End":"07:51.910","Text":"a soft rubber onto the rubber component."},{"Start":"07:53.570 ","End":"07:55.640","Text":"Now if I toggle the rubber component"},{"Start":"07:55.710 ","End":"07:57.440","Text":"on and off, you’ll see that we have"},{"Start":"07:57.440 ","End":"07:59.390","Text":"our dog bowl and we have our rubber…"},{"Start":"07:59.800 ","End":"08:01.430","Text":"but we obviously don’t want the"},{"Start":"08:01.430 ","End":"08:03.330","Text":"rubber to cover the entire surface,"},{"Start":"08:03.620 ","End":"08:05.569","Text":"so we’ll have to trim some of it away."},{"Start":"08:06.270 ","End":"08:08.034","Text":"So I’ll create a new sketch off of"},{"Start":"08:08.034 ","End":"08:09.900","Text":"the bottom plane, and I’ll hit letter"},{"Start":"08:09.900 ","End":"08:12.140","Text":"“C” on the keyboard for center circle."},{"Start":"08:13.280 ","End":"08:15.900","Text":"I’ll click on the center origin, drag out"},{"Start":"08:15.990 ","End":"08:19.900","Text":"and I’ll type in 185mm for the distance."},{"Start":"08:21.020 ","End":"08:23.230","Text":"Then I’ll hit letter “E” for extrude,"},{"Start":"08:23.670 ","End":"08:25.110","Text":"and we’ll need to select the circle"},{"Start":"08:25.110 ","End":"08:27.760","Text":"we just created and drag the arrow up."},{"Start":"08:28.650 ","End":"08:31.070","Text":"Now we can select “to object” from"},{"Start":"08:31.070 ","End":"08:33.860","Text":"the extent menu, and select the top"},{"Start":"08:33.870 ","End":"08:36.179","Text":"of our dog bowl, that way we’re not"},{"Start":"08:36.179 ","End":"08:38.320","Text":"cutting any further than necessary."},{"Start":"08:39.500 ","End":"08:41.900","Text":"Then I’ll toggle the objects to cut"},{"Start":"08:41.940 ","End":"08:44.800","Text":"and we’ll unselect the dog bowl…"},{"Start":"08:45.520 ","End":"08:47.540","Text":"so you’ll this is one reason it\u0027s a"},{"Start":"08:47.540 ","End":"08:49.449","Text":"good habit to rename your components"},{"Start":"08:49.450 ","End":"08:51.200","Text":"and bodies, it will make it a lot"},{"Start":"08:51.240 ","End":"08:52.969","Text":"easier to select the right thing when"},{"Start":"08:52.969 ","End":"08:54.930","Text":"using certain tools in Fusion 360."},{"Start":"08:55.710 ","End":"08:56.920","Text":"Let’s click “okay” and"},{"Start":"08:56.920 ","End":"08:58.050","Text":"take a look at the result."},{"Start":"08:59.320 ","End":"09:00.469","Text":"Now if we take a look at the"},{"Start":"09:00.470 ","End":"09:02.660","Text":"section analysis, we’ll see that"},{"Start":"09:02.660 ","End":"09:04.620","Text":"the rubber band isn’t very thick."},{"Start":"09:07.740 ","End":"09:09.650","Text":"So I’ll select thicken from the create"},{"Start":"09:09.650 ","End":"09:12.760","Text":"dropdown menu, click on the rubber"},{"Start":"09:12.770 ","End":"09:15.830","Text":"band, and I’ll make this 1.5mm thick."},{"Start":"09:17.570 ","End":"09:18.569","Text":"So you’ll see now we have a nice"},{"Start":"09:18.570 ","End":"09:20.030","Text":"protective rubber band around"},{"Start":"09:20.030 ","End":"09:21.440","Text":"the bottom of our dog bowl."},{"Start":"09:21.810 ","End":"09:23.690","Text":"The last thing I’ll do here is add"},{"Start":"09:23.690 ","End":"09:25.640","Text":"the appearance of stainless steel by"},{"Start":"09:25.640 ","End":"09:27.300","Text":"right-clicking on the bowl component"},{"Start":"09:27.860 ","End":"09:29.660","Text":"and I’ll drag and drop “polished"},{"Start":"09:29.660 ","End":"09:31.719","Text":"stainless-steel” onto the dog bowl."},{"Start":"09:32.969 ","End":"09:35.480","Text":"Then, I’ll re-apply the soft"},{"Start":"09:35.480 ","End":"09:37.790","Text":"rubber to our banding here, because"},{"Start":"09:37.800 ","End":"09:39.540","Text":"the thicken tool created a new"},{"Start":"09:39.540 ","End":"09:41.400","Text":"“body” so we lost our appearance."},{"Start":"09:41.400 ","End":"09:41.544","Text":"And just a heads up..."},{"Start":"09:41.544 ","End":"09:41.774","Text":"tomorrow I’ll be kicking off a new series"},{"Start":"09:41.774 ","End":"09:41.947","Text":"called Fusion Fridays, where I’ll be"},{"Start":"09:41.947 ","End":"09:42.091","Text":"releasing short videos every Friday."},{"Start":"09:42.091 ","End":"09:42.264","Text":"These videos will be covering different"},{"Start":"09:42.264 ","End":"09:44.270","Text":"tips and tricks that will help you"},{"Start":"09:44.270 ","End":"09:44.455","Text":"become more proficient in Fusion 360."}],"ID":28994},{"Watched":false,"Name":"Day 12 - 3D Model an Auger Bit","Duration":"10m 2s","ChapterTopicVideoID":27792,"CourseChapterTopicPlaylistID":275347,"HasSubtitles":true,"ThumbnailPath":null,"UploadDate":null,"DurationForVideoObject":null,"Description":null,"MetaTitle":null,"MetaDescription":null,"Canonical":null,"VideoComments":[],"Subtitles":[{"Start":"00:00.060 ","End":"00:00.780","Text":"Kevin Kennedy: Hey there, It’s"},{"Start":"00:00.780 ","End":"00:02.820","Text":"Kevin Kennedy, and welcome to Day"},{"Start":"00:02.820 ","End":"00:06.370","Text":"#12 of Learn Fusion 360 in 30 days."},{"Start":"00:06.830 ","End":"00:08.739","Text":"By the end of this tutorial, you’ll"},{"Start":"00:08.740 ","End":"00:11.130","Text":"be able to 3D model an auger bit."},{"Start":"00:11.509 ","End":"00:13.040","Text":"We’ll take a look at how to create"},{"Start":"00:13.070 ","End":"00:15.370","Text":"a new component, how to use the pipe"},{"Start":"00:15.380 ","End":"00:18.469","Text":"feature, how to create a sweep following"},{"Start":"00:19.799 ","End":"00:21.959","Text":"a helix, and how to loft to a point."},{"Start":"00:21.970 ","End":"00:24.450","Text":"Now we’ll start off by creating a new"},{"Start":"00:24.470 ","End":"00:26.640","Text":"component by selecting “new component”"},{"Start":"00:26.720 ","End":"00:28.990","Text":"under the assemble dropdown menu."},{"Start":"00:30.150 ","End":"00:31.960","Text":"We’re going to create a component"},{"Start":"00:31.990 ","End":"00:33.829","Text":"because it will group all of our bodies"},{"Start":"00:33.830 ","End":"00:36.349","Text":"and sketches within the component, and"},{"Start":"00:36.350 ","End":"00:38.640","Text":"it will give us a few other advantages"},{"Start":"00:38.740 ","End":"00:40.820","Text":"should we create assemblies or need"},{"Start":"00:40.820 ","End":"00:42.650","Text":"to make copies of the component."},{"Start":"00:43.220 ","End":"00:45.230","Text":"In the component dialogue box, I’ll"},{"Start":"00:45.230 ","End":"00:47.530","Text":"make sure new component is selected..."},{"Start":"00:47.990 ","End":"00:49.600","Text":"and it\u0027s a good idea to get into"},{"Start":"00:49.600 ","End":"00:51.570","Text":"the habit of naming your components"},{"Start":"00:51.589 ","End":"00:53.929","Text":"and bodies as you create them, so"},{"Start":"00:53.929 ","End":"00:55.519","Text":"we’ll go ahead and write out “Auger"},{"Start":"00:55.530 ","End":"00:57.699","Text":"Bit” for the name and click okay."},{"Start":"00:57.699 ","End":"00:57.799","Text":"I’ve noticed a lot of people are"},{"Start":"00:57.799 ","End":"00:57.869","Text":"confused on the difference between"},{"Start":"00:57.869 ","End":"00:57.968","Text":"components and bodies so I’m going to"},{"Start":"00:57.968 ","End":"00:58.053","Text":"take time to explain the differences"},{"Start":"00:58.053 ","End":"00:58.166","Text":"and demo a few things for day #13"},{"Start":"00:58.166 ","End":"00:58.265","Text":"of Learn Fusion 360 in 30 days."},{"Start":"00:58.280 ","End":"00:59.660","Text":"Now we’re going to create the"},{"Start":"00:59.720 ","End":"01:01.300","Text":"center rod of the auger bit"},{"Start":"01:01.340 ","End":"01:03.010","Text":"by using the pipe command."},{"Start":"01:03.610 ","End":"01:05.860","Text":"If we select pipe from the create"},{"Start":"01:05.870 ","End":"01:07.650","Text":"dropdown list you’ll see that"},{"Start":"01:07.650 ","End":"01:09.749","Text":"I can’t actually create a pipe"},{"Start":"01:09.789 ","End":"01:11.630","Text":"without a path for it to follow."},{"Start":"01:12.320 ","End":"01:14.530","Text":"So we’ll hit close… and we’ll go"},{"Start":"01:14.530 ","End":"01:16.440","Text":"ahead and call the line tool with"},{"Start":"01:16.450 ","End":"01:18.429","Text":"the keyboard shortcut letter “L”"},{"Start":"01:19.020 ","End":"01:21.070","Text":"and I’ll click on the XY plane."},{"Start":"01:21.760 ","End":"01:24.030","Text":"I’ll click on the center origin, drag"},{"Start":"01:24.030 ","End":"01:28.489","Text":"my mouse up and type in 750mm for"},{"Start":"01:28.490 ","End":"01:31.090","Text":"the distance, followed by the tab key"},{"Start":"01:31.090 ","End":"01:33.080","Text":"to lock the dimension in place… and"},{"Start":"01:33.080 ","End":"01:34.759","Text":"I’ll click with my mouse and then hit"},{"Start":"01:34.759 ","End":"01:37.179","Text":"Escape key to exit the line command."},{"Start":"01:38.230 ","End":"01:39.999","Text":"Now if we go back to the create"},{"Start":"01:40.000 ","End":"01:42.130","Text":"menu and select pipe, we can create"},{"Start":"01:42.130 ","End":"01:44.429","Text":"a pipe by selecting the path or"},{"Start":"01:44.429 ","End":"01:45.960","Text":"the line that we just created."},{"Start":"01:47.779 ","End":"01:50.080","Text":"Chain selection wouldn’t matter because we"},{"Start":"01:50.080 ","End":"01:52.830","Text":"just have one line, but if we had a spline"},{"Start":"01:52.840 ","End":"01:55.310","Text":"or multiple lines making up our path then"},{"Start":"01:55.310 ","End":"01:57.400","Text":"we would have to have that selected if"},{"Start":"01:57.400 ","End":"01:59.280","Text":"we wanted it to follow the whole line."},{"Start":"02:00.139 ","End":"02:01.899","Text":"The distance is how far along"},{"Start":"02:01.900 ","End":"02:03.789","Text":"the path the pipe follows."},{"Start":"02:04.410 ","End":"02:06.540","Text":"If I drag the arrow you’ll see"},{"Start":"02:06.540 ","End":"02:08.360","Text":"that the distance changes, but"},{"Start":"02:08.360 ","End":"02:09.870","Text":"we’ll go ahead and leave this at"},{"Start":"02:09.870 ","End":"02:11.920","Text":"1, so it\u0027s set to the full length."},{"Start":"02:13.500 ","End":"02:15.180","Text":"The next option, you’ll see that I"},{"Start":"02:15.180 ","End":"02:17.210","Text":"can change the section of the path by"},{"Start":"02:17.210 ","End":"02:21.489","Text":"selecting a square, triangle, or the"},{"Start":"02:21.490 ","End":"02:24.800","Text":"circle which we’ll leave it on for now."},{"Start":"02:24.800 ","End":"02:26.560","Text":"Next, you’ll see that we can change"},{"Start":"02:26.570 ","End":"02:28.679","Text":"the section size, or the width"},{"Start":"02:28.690 ","End":"02:30.550","Text":"of the pipe...so I’ll go ahead"},{"Start":"02:30.560 ","End":"02:32.989","Text":"and type in 38mm for the width."},{"Start":"02:33.000 ","End":"02:35.890","Text":"Then, I’ll select hollow so our pipe"},{"Start":"02:35.890 ","End":"02:37.770","Text":"isn’t solid, and you’ll see that"},{"Start":"02:37.770 ","End":"02:39.829","Text":"as I selected hollow it gave us the"},{"Start":"02:39.830 ","End":"02:42.129","Text":"ability to now punch in the section"},{"Start":"02:42.150 ","End":"02:45.060","Text":"thickness, or the thickness of our pipe."},{"Start":"02:46.040 ","End":"02:47.359","Text":"I’ll go ahead and change the"},{"Start":"02:47.370 ","End":"02:50.000","Text":"section thickness to 3mm and click"},{"Start":"02:50.000 ","End":"02:51.900","Text":"okay to exit the pipe command."},{"Start":"02:53.059 ","End":"02:54.980","Text":"Before we go any further I’ll hit"},{"Start":"02:54.980 ","End":"02:57.250","Text":"save and title this “Auger Bit”"},{"Start":"02:57.650 ","End":"02:59.460","Text":"and click the blue save button."},{"Start":"03:00.789 ","End":"03:02.670","Text":"Now in order to create the sweep, we’ll"},{"Start":"03:02.670 ","End":"03:05.000","Text":"have to create a helix shape that revolves"},{"Start":"03:05.050 ","End":"03:07.500","Text":"around our pipe… and there are a few"},{"Start":"03:07.790 ","End":"03:10.039","Text":"ways that we can do this in Fusion 360."},{"Start":"03:10.740 ","End":"03:13.020","Text":"Unfortunately, Fusion doesn’t offer a"},{"Start":"03:13.059 ","End":"03:14.849","Text":"helix sketch command like some other"},{"Start":"03:14.849 ","End":"03:17.709","Text":"CAD programs...but, as the first viable"},{"Start":"03:17.709 ","End":"03:20.649","Text":"option, there is free helix plugin,"},{"Start":"03:20.660 ","End":"03:23.030","Text":"created by Patrick Rainsberry, that"},{"Start":"03:23.030 ","End":"03:25.549","Text":"allows you to create helix sketches."},{"Start":"03:26.510 ","End":"03:27.730","Text":"I’ll link to the the plugin and"},{"Start":"03:27.900 ","End":"03:29.480","Text":"the installation directions in the"},{"Start":"03:29.480 ","End":"03:31.490","Text":"description of this video if you’d"},{"Start":"03:31.490 ","End":"03:33.420","Text":"like to play around with it, but for"},{"Start":"03:33.429 ","End":"03:35.369","Text":"this video I’ll show you the second"},{"Start":"03:35.369 ","End":"03:37.900","Text":"feasible option, which is to create a"},{"Start":"03:37.900 ","End":"03:40.430","Text":"coil and then project a sketch from it."},{"Start":"03:41.300 ","End":"03:43.170","Text":"So I’ll activate the coil feature"},{"Start":"03:43.230 ","End":"03:45.060","Text":"under the create dropdown list"},{"Start":"03:45.220 ","End":"03:47.030","Text":"and I’ll select on the top plane."},{"Start":"03:47.700 ","End":"03:49.479","Text":"Then, I’ll take a look at this from"},{"Start":"03:49.480 ","End":"03:51.709","Text":"the top view, and I’ll select the"},{"Start":"03:51.710 ","End":"03:54.399","Text":"center of our pipe and I’ll drag out"},{"Start":"03:54.400 ","End":"03:56.600","Text":"with my mouse, and I’ll select the"},{"Start":"03:56.630 ","End":"03:58.630","Text":"inside of the pipe which is at 32mm."},{"Start":"04:01.240 ","End":"04:03.440","Text":"I’ll change the revolutions to 5,"},{"Start":"04:03.530 ","End":"04:05.265","Text":"so the auger bit spirals around this"},{"Start":"04:05.330 ","End":"04:08.269","Text":"center pipe 5 times, and I want them"},{"Start":"04:08.270 ","End":"04:10.770","Text":"to go up a little over half the pipe"},{"Start":"04:10.779 ","End":"04:13.660","Text":"so I’ll punch in 450mm for the height."},{"Start":"04:15.410 ","End":"04:16.810","Text":"If we take a look at this from the"},{"Start":"04:16.820 ","End":"04:18.810","Text":"top view again we can see where"},{"Start":"04:18.810 ","End":"04:20.380","Text":"the coil is compared to the pipe.."},{"Start":"04:20.390 ","End":"04:23.030","Text":"And we want the coil to line up with the"},{"Start":"04:23.050 ","End":"04:25.009","Text":"outside of the pipe so I’ll change the"},{"Start":"04:25.020 ","End":"04:28.409","Text":"section position to “outside” and I’ll"},{"Start":"04:28.430 ","End":"04:31.560","Text":"type in 3mm for the section size, which"},{"Start":"04:31.560 ","End":"04:33.880","Text":"is the same thickness we made our pipe."},{"Start":"04:34.560 ","End":"04:36.380","Text":"Lastly, I’ll change the operation"},{"Start":"04:36.380 ","End":"04:38.700","Text":"to “new body” and I’ll click okay."},{"Start":"04:40.010 ","End":"04:41.600","Text":"Looking at the front of the pipe we"},{"Start":"04:41.600 ","End":"04:43.239","Text":"can’t really see the coil because"},{"Start":"04:43.380 ","End":"04:44.829","Text":"it lines up with the outside edge of"},{"Start":"04:44.830 ","End":"04:46.980","Text":"our pipe, so I’ll hit the lightbulb"},{"Start":"04:47.059 ","End":"04:49.329","Text":"for the pipe in the browser and I’ll"},{"Start":"04:49.390 ","End":"04:51.500","Text":"also go ahead and re-name the bodies"},{"Start":"04:51.510 ","End":"04:53.840","Text":"by double-clicking on them and typing"},{"Start":"04:53.840 ","End":"04:57.310","Text":"out “pipe” and “coil,” respectively."},{"Start":"04:58.860 ","End":"05:00.720","Text":"Now to project the sketch I’ll go to"},{"Start":"05:00.720 ","End":"05:03.150","Text":"the sketch dropdown menu, find the"},{"Start":"05:03.150 ","End":"05:06.329","Text":"project / include folder, and I’ll"},{"Start":"05:06.330 ","End":"05:09.919","Text":"select “project to surface.” Then I’ll"},{"Start":"05:09.920 ","End":"05:12.250","Text":"have to select the front plane here, and"},{"Start":"05:12.250 ","End":"05:14.460","Text":"I’ll select the coil for both the faces"},{"Start":"05:14.540 ","End":"05:16.840","Text":"and the curves, and I’ll click okay."},{"Start":"05:17.840 ","End":"05:19.270","Text":"At this point, we’re done with the"},{"Start":"05:19.270 ","End":"05:21.070","Text":"coil, so I’ll turn the coil off in the"},{"Start":"05:21.080 ","End":"05:23.250","Text":"browser by hitting the lightbulb icon."},{"Start":"05:24.510 ","End":"05:26.070","Text":"We’ll want to create a rectangle"},{"Start":"05:26.070 ","End":"05:27.530","Text":"shape that we’ll sweep around"},{"Start":"05:27.530 ","End":"05:28.950","Text":"the helix sketch we have."},{"Start":"05:30.170 ","End":"05:32.259","Text":"First, I’ll create a new plane off the"},{"Start":"05:32.260 ","End":"05:34.289","Text":"path by going to the construct menu,"},{"Start":"05:34.590 ","End":"05:38.409","Text":"I’ll select “plane through path” and I’ll"},{"Start":"05:38.410 ","End":"05:40.870","Text":"click on the helix… and I’ll click okay."},{"Start":"05:41.299 ","End":"05:43.080","Text":"We’ll right-click on the plane and hit"},{"Start":"05:43.080 ","End":"05:45.470","Text":"“create new sketch” I’ll hit letter"},{"Start":"05:45.520 ","End":"05:47.230","Text":"“L” on the keyboard to call the line"},{"Start":"05:47.230 ","End":"05:54.320","Text":"command, I’ll go over 113mm, hit"},{"Start":"05:54.320 ","End":"05:56.140","Text":"the tab key to lock the dimension in"},{"Start":"05:56.140 ","End":"05:58.639","Text":"place, and I’ll click with my mouse."},{"Start":"05:58.639 ","End":"06:01.930","Text":"Then, I’ll go up 3.5mm, hit the"},{"Start":"06:01.940 ","End":"06:04.020","Text":"tab key and click with my mouse."},{"Start":"06:05.120 ","End":"06:09.159","Text":"I’ll go back to the left 113mm, hit the"},{"Start":"06:09.160 ","End":"06:12.029","Text":"tab key, and click with my mouse, and"},{"Start":"06:12.030 ","End":"06:14.420","Text":"I’ll go down to connect lines and close"},{"Start":"06:14.420 ","End":"06:16.940","Text":"off the profile, which will be signified"},{"Start":"06:16.949 ","End":"06:19.099","Text":"by the orange background appearance."},{"Start":"06:20.080 ","End":"06:21.770","Text":"Now I can also add some extra"},{"Start":"06:21.770 ","End":"06:23.609","Text":"constraints by holding down shift"},{"Start":"06:24.330 ","End":"06:26.030","Text":"and clicking both of the horizontal"},{"Start":"06:26.030 ","End":"06:28.560","Text":"lines, then I’ll right-click and"},{"Start":"06:28.560 ","End":"06:30.400","Text":"select the parallel constraint."},{"Start":"06:30.400 ","End":"06:34.399","Text":"Alrighty, so I’ll hit stop sketch in the"},{"Start":"06:34.400 ","End":"06:39.020","Text":"toolbar, and then I’ll activate the sweep"},{"Start":"06:39.020 ","End":"06:41.230","Text":"command from the create dropdown menu."},{"Start":"06:42.280 ","End":"06:43.700","Text":"I’ll start off by selecting the"},{"Start":"06:43.700 ","End":"06:45.900","Text":"profile that we just created, and"},{"Start":"06:45.900 ","End":"06:47.880","Text":"I’ll select the coil as the path."},{"Start":"06:48.520 ","End":"06:50.039","Text":"Now at this point, you can see that"},{"Start":"06:50.040 ","End":"06:51.629","Text":"it doesn’t have enough to create the"},{"Start":"06:51.679 ","End":"06:53.879","Text":"sweep, so I’ll switch the “type” from"},{"Start":"06:53.879 ","End":"06:57.540","Text":"“single path” to “path + guide surface”"},{"Start":"06:58.490 ","End":"06:59.760","Text":"and then we’ll select the bottom"},{"Start":"06:59.760 ","End":"07:01.580","Text":"of our pipe as the guide surface."},{"Start":"07:07.969 ","End":"07:09.910","Text":"I’ll make sure the operation is set"},{"Start":"07:09.920 ","End":"07:12.000","Text":"to “new body” and I’ll click okay."},{"Start":"07:13.710 ","End":"07:16.440","Text":"Then, before I forget I’ll rename the body"},{"Start":"07:16.460 ","End":"07:18.700","Text":"by double-clicking on it in the Fusion 360"},{"Start":"07:18.710 ","End":"07:21.640","Text":"browser, and I’ll type out “Metal Spiral.”"},{"Start":"07:23.500 ","End":"07:25.239","Text":"Now taking a look at the bottom of our"},{"Start":"07:25.270 ","End":"07:27.310","Text":"auger bit, we don’t want dirt to come"},{"Start":"07:27.310 ","End":"07:29.210","Text":"into the pipe here, so we’ll go ahead and"},{"Start":"07:29.210 ","End":"07:31.520","Text":"create a cone shape with the loft feature."},{"Start":"07:32.400 ","End":"07:33.530","Text":"I’ll take a look at the bottom of"},{"Start":"07:33.540 ","End":"07:35.440","Text":"the pipe and holding down the shift"},{"Start":"07:35.440 ","End":"07:37.670","Text":"key I’ll select these two circles."},{"Start":"07:37.680 ","End":"07:39.809","Text":"Now, we’ll project them by going to"},{"Start":"07:39.809 ","End":"07:42.119","Text":"the sketch dropdown list, we’ll find"},{"Start":"07:42.120 ","End":"07:44.450","Text":"the project / include folder once"},{"Start":"07:44.450 ","End":"07:47.049","Text":"again, and this time I’ll select"},{"Start":"07:47.119 ","End":"07:48.830","Text":"“intersect,” because we want the"},{"Start":"07:48.830 ","End":"07:50.680","Text":"circles to be on their current plane."},{"Start":"07:54.510 ","End":"08:01.209","Text":"We’ll also need to create a point that"},{"Start":"08:01.210 ","End":"08:02.950","Text":"we’ll loft to and we’ll want it to be"},{"Start":"08:02.950 ","End":"08:05.669","Text":"away from the end of the pipe here, so"},{"Start":"08:05.670 ","End":"08:09.530","Text":"I’ll select offset plane, and I’ll punch"},{"Start":"08:09.530 ","End":"08:13.030","Text":"in 25mm for the distance and click okay."},{"Start":"08:14.380 ","End":"08:16.640","Text":"Then, I’ll right-click on the plane and"},{"Start":"08:16.640 ","End":"08:19.489","Text":"select “create new sketch.” I’ll go to"},{"Start":"08:19.490 ","End":"08:21.860","Text":"the sketch dropdown menu and select point,"},{"Start":"08:22.449 ","End":"08:24.169","Text":"and I’ll click on the center origin."},{"Start":"08:25.570 ","End":"08:27.600","Text":"Now we have our profile and we"},{"Start":"08:27.600 ","End":"08:29.040","Text":"have the point that we’ll loft too."},{"Start":"08:32.840 ","End":"08:34.679","Text":"So I’ll activate loft from the create"},{"Start":"08:34.690 ","End":"08:36.990","Text":"dropdown menu, and I’ll select the"},{"Start":"08:36.990 ","End":"08:39.110","Text":"profile and then I’ll select the point."},{"Start":"08:40.270 ","End":"08:41.799","Text":"I’ll make sure the operation is"},{"Start":"08:41.799 ","End":"08:43.949","Text":"set to “join” and I’ll click okay."},{"Start":"08:45.080 ","End":"08:46.830","Text":"I also want to add a nice chamfer"},{"Start":"08:46.830 ","End":"08:48.580","Text":"to the beginning of the blade here."},{"Start":"08:49.090 ","End":"08:50.589","Text":"So I’ll select chamfer from"},{"Start":"08:50.590 ","End":"08:52.530","Text":"the modify dropdown list and"},{"Start":"08:52.530 ","End":"08:54.150","Text":"I’ll select on the top line."},{"Start":"08:55.210 ","End":"08:57.699","Text":"I’ll make the distance 3mm and I"},{"Start":"08:57.700 ","End":"08:59.770","Text":"want the angle to go back a bit"},{"Start":"08:59.770 ","End":"09:02.250","Text":"further, so I’ll change the chamfer"},{"Start":"09:02.270 ","End":"09:04.610","Text":"type from “equal distance” to “two"},{"Start":"09:04.610 ","End":"09:07.010","Text":"distances” and then I’ll make the"},{"Start":"09:07.010 ","End":"09:10.290","Text":"second distance 5mm, and click okay."},{"Start":"09:11.679 ","End":"09:13.770","Text":"I don’t want this video to get too long,"},{"Start":"09:13.780 ","End":"09:15.380","Text":"so I’m not going to worry too much about"},{"Start":"09:15.380 ","End":"09:18.380","Text":"the top mechanism, but I’ll quickly create"},{"Start":"09:18.610 ","End":"09:20.360","Text":"part of where the auger bit hooks up to"},{"Start":"09:20.360 ","End":"09:23.150","Text":"the machine by using a center circle."},{"Start":"09:26.170 ","End":"09:27.780","Text":"And I’ll create one to the outside"},{"Start":"09:27.780 ","End":"09:32.460","Text":"of the pipe and another to 50mm,"},{"Start":"09:32.470 ","End":"09:34.620","Text":"and then I’ll hit letter “E” to"},{"Start":"09:34.820 ","End":"09:40.610","Text":"extrude this down 70mm, set the"},{"Start":"09:40.610 ","End":"09:42.839","Text":"operation to “join” and click okay."},{"Start":"09:43.870 ","End":"09:45.479","Text":"Lastly, I can right-click on"},{"Start":"09:45.480 ","End":"09:47.420","Text":"the component, hit appearances,"},{"Start":"09:47.469 ","End":"09:48.860","Text":"and search for steel..."},{"Start":"09:49.950 ","End":"09:52.509","Text":"I’ll simply drag and drop polished steel"},{"Start":"09:52.520 ","End":"09:54.820","Text":"onto the model, and I’ll double click on"},{"Start":"09:54.820 ","End":"09:57.230","Text":"the material to change the color to red."}],"ID":28995},{"Watched":false,"Name":"Day 13 - Bodies vs. Components Explained","Duration":"10m 21s","ChapterTopicVideoID":27793,"CourseChapterTopicPlaylistID":275347,"HasSubtitles":true,"ThumbnailPath":null,"UploadDate":null,"DurationForVideoObject":null,"Description":null,"MetaTitle":null,"MetaDescription":null,"Canonical":null,"VideoComments":[],"Subtitles":[{"Start":"00:00.040 ","End":"00:00.730","Text":"Kevin Kennedy: Hey there, It’s"},{"Start":"00:00.740 ","End":"00:02.770","Text":"Kevin Kennedy, and welcome to Day"},{"Start":"00:02.770 ","End":"00:06.279","Text":"#13 of Learn Fusion 360 in 30 days."},{"Start":"00:06.820 ","End":"00:08.640","Text":"By the end of this tutorial, you’ll"},{"Start":"00:08.640 ","End":"00:10.670","Text":"have a solid understanding of the"},{"Start":"00:10.670 ","End":"00:13.260","Text":"difference between Bodies and Components."},{"Start":"00:14.130 ","End":"00:15.850","Text":"Also, be sure to watch to the"},{"Start":"00:15.850 ","End":"00:17.279","Text":"end where I’ll discuss the"},{"Start":"00:17.289 ","End":"00:20.280","Text":"dubbed rule #1 of Fusion 360."},{"Start":"00:20.810 ","End":"00:23.020","Text":"Now I’ve noticed a lot of explanations"},{"Start":"00:23.020 ","End":"00:25.540","Text":"forget to talk about one important thing,"},{"Start":"00:25.750 ","End":"00:27.760","Text":"which is the difference between Bottom-Up"},{"Start":"00:27.760 ","End":"00:30.040","Text":"Assemblies vs Top-Down Assemblies,"},{"Start":"00:30.719 ","End":"00:32.780","Text":"which will help you better understand"},{"Start":"00:32.820 ","End":"00:35.799","Text":"WHY Fusion 360 is set up the way it is."},{"Start":"00:37.120 ","End":"00:38.240","Text":"Let’s take a look at"},{"Start":"00:38.250 ","End":"00:39.950","Text":"Bottom Up Assemblies first."},{"Start":"00:40.500 ","End":"00:42.360","Text":"This is the traditional assembly"},{"Start":"00:42.370 ","End":"00:43.850","Text":"modeling technique… and if you’re"},{"Start":"00:43.880 ","End":"00:46.199","Text":"coming from Autodesk Inventor or"},{"Start":"00:46.200 ","End":"00:47.940","Text":"another CAD program then you’re"},{"Start":"00:47.940 ","End":"00:49.819","Text":"likely already familiar with it."},{"Start":"00:50.790 ","End":"00:52.939","Text":"The essence of the “Bottom-Up Assembly”"},{"Start":"00:52.940 ","End":"00:55.360","Text":"Technique is that each part is created"},{"Start":"00:55.370 ","End":"00:58.140","Text":"individually, and then all the parts"},{"Start":"00:58.140 ","End":"01:00.860","Text":"are inserted into an assembly document"},{"Start":"01:00.940 ","End":"01:02.240","Text":"and constrained to each other."},{"Start":"01:03.179 ","End":"01:05.030","Text":"There is NO link created between parts,"},{"Start":"01:05.050 ","End":"01:06.929","Text":"so the parts fit together because"},{"Start":"01:06.929 ","End":"01:08.770","Text":"you designed them to fit together."},{"Start":"01:09.309 ","End":"01:11.780","Text":"If you change one part, you’d better"},{"Start":"01:11.780 ","End":"01:13.520","Text":"know which other parts will be affected"},{"Start":"01:13.520 ","End":"01:14.979","Text":"by the change and make sure that"},{"Start":"01:15.070 ","End":"01:16.590","Text":"they are also updated accordingly."},{"Start":"01:17.870 ","End":"01:20.020","Text":"On the other hand, we have “Top-Down"},{"Start":"01:20.020 ","End":"01:22.500","Text":"Assemblies.” This means you start with"},{"Start":"01:22.500 ","End":"01:24.690","Text":"an assembly file and build all your"},{"Start":"01:24.690 ","End":"01:27.119","Text":"parts within the context of the assembly."},{"Start":"01:28.639 ","End":"01:31.320","Text":"Fusion 360 falls in the top-down assembly"},{"Start":"01:31.320 ","End":"01:34.050","Text":"category, which is why you’ll never see"},{"Start":"01:34.070 ","End":"01:36.770","Text":"“create new assembly” under the file menu."},{"Start":"01:37.200 ","End":"01:38.650","Text":"But you will in Autodesk"},{"Start":"01:38.670 ","End":"01:40.420","Text":"Inventor and SolidWorks."},{"Start":"01:41.480 ","End":"01:43.759","Text":"The benefit of top-down assemblies is"},{"Start":"01:43.770 ","End":"01:45.900","Text":"that we can reference other sketches"},{"Start":"01:45.910 ","End":"01:48.499","Text":"and parts, so if we change one thing"},{"Start":"01:48.650 ","End":"01:50.700","Text":"the other features change accordingly."},{"Start":"01:51.630 ","End":"01:53.390","Text":"This is a great way of ensuring that"},{"Start":"01:53.390 ","End":"01:55.360","Text":"parts that need to fit together always"},{"Start":"01:55.360 ","End":"01:57.440","Text":"fit together, without you having to go"},{"Start":"01:57.440 ","End":"01:59.679","Text":"back and manually editing them each time."},{"Start":"02:00.809 ","End":"02:02.529","Text":"This top-down technique is"},{"Start":"02:02.530 ","End":"02:04.280","Text":"intuitive and much quicker, but"},{"Start":"02:04.280 ","End":"02:06.649","Text":"it does still have some drawbacks."},{"Start":"02:07.180 ","End":"02:08.519","Text":"You can still get yourself into"},{"Start":"02:08.520 ","End":"02:10.410","Text":"a pickle, especially with large"},{"Start":"02:10.410 ","End":"02:14.690","Text":"assemblies, which is why it\u0027s important"},{"Start":"02:14.700 ","End":"02:16.500","Text":"to plan out your model before you"},{"Start":"02:16.500 ","End":"02:18.350","Text":"even start your very first sketch."},{"Start":"02:19.849 ","End":"02:22.649","Text":"Now that you know Fusion 360 is based"},{"Start":"02:22.650 ","End":"02:24.619","Text":"on the “Top Down” assembly technique,"},{"Start":"02:24.880 ","End":"02:26.610","Text":"let’s take a look at the difference"},{"Start":"02:26.630 ","End":"02:28.770","Text":"between Bodies and Components."},{"Start":"02:29.640 ","End":"02:32.350","Text":"Bodies can be seen as modeling tools."},{"Start":"02:32.570 ","End":"02:34.589","Text":"You use separate bodies to add"},{"Start":"02:34.599 ","End":"02:36.530","Text":"or remove geometry to achieve"},{"Start":"02:36.540 ","End":"02:38.360","Text":"the final shape of your design."},{"Start":"02:39.210 ","End":"02:40.519","Text":"An example of a body"},{"Start":"02:40.549 ","End":"02:42.200","Text":"could be a ceramic mug."},{"Start":"02:42.770 ","End":"02:44.380","Text":"You would create one body for the"},{"Start":"02:44.380 ","End":"02:46.310","Text":"cylindrical part of the cup and"},{"Start":"02:46.310 ","End":"02:48.460","Text":"another body for the handle, and"},{"Start":"02:48.550 ","End":"02:50.150","Text":"of course, join them together."},{"Start":"02:50.980 ","End":"02:52.480","Text":"Contrary, components represent"},{"Start":"02:52.760 ","End":"02:54.650","Text":"real-world parts… you can think"},{"Start":"02:54.650 ","End":"02:55.890","Text":"of them as things that are"},{"Start":"02:55.890 ","End":"02:58.360","Text":"manufactured with multiple pieces."},{"Start":"02:59.470 ","End":"03:00.829","Text":"You’ll want to use components when"},{"Start":"03:00.830 ","End":"03:02.739","Text":"your design consists of multiple parts"},{"Start":"03:02.790 ","End":"03:04.730","Text":"that may be assembled to one another."},{"Start":"03:05.360 ","End":"03:07.260","Text":"A good example of a component would be"},{"Start":"03:07.260 ","End":"03:09.490","Text":"a door hinge, as it consists of three"},{"Start":"03:09.820 ","End":"03:12.050","Text":"components: one for the left-wing of"},{"Start":"03:12.050 ","End":"03:14.949","Text":"the hinge, one for the right-wing, and"},{"Start":"03:15.820 ","End":"03:17.770","Text":"the pin that holds the hinge together."},{"Start":"03:18.449 ","End":"03:19.899","Text":"Now let\u0027s take a deeper dive"},{"Start":"03:19.900 ","End":"03:21.420","Text":"into both of these concepts."},{"Start":"03:22.320 ","End":"03:24.510","Text":"With Bodies, you’ll create a new one any"},{"Start":"03:24.510 ","End":"03:27.140","Text":"time you turn a sketch into a 3D object."},{"Start":"03:27.740 ","End":"03:29.710","Text":"If we take a look at the ceramic mug"},{"Start":"03:29.710 ","End":"03:32.279","Text":"once again, you’ll see that the downside"},{"Start":"03:32.280 ","End":"03:34.480","Text":"to bodies is that they can’t be copied"},{"Start":"03:34.579 ","End":"03:37.600","Text":"unless your in the direct modeling"},{"Start":"03:37.600 ","End":"03:40.330","Text":"mode...this is mainly because copying"},{"Start":"03:40.330 ","End":"03:42.559","Text":"the parametric timeline is difficult."},{"Start":"03:42.990 ","End":"03:44.780","Text":"So if for some reason you want to"},{"Start":"03:44.780 ","End":"03:46.820","Text":"copy a body to a completely different"},{"Start":"03:46.830 ","End":"03:48.990","Text":"file then you’ll have to change it to"},{"Start":"03:48.990 ","End":"03:51.220","Text":"direct modeling mode by right-clicking"},{"Start":"03:51.220 ","End":"03:53.730","Text":"on the settings icon in the lower"},{"Start":"03:53.730 ","End":"03:56.040","Text":"right-hand corner, and then select"},{"Start":"03:56.050 ","End":"03:58.130","Text":"“do not capture design history” and"},{"Start":"03:58.130 ","End":"04:00.260","Text":"click continue...and as you will"},{"Start":"04:00.260 ","End":"04:02.320","Text":"see it will delete the timeline."},{"Start":"04:12.499 ","End":"04:15.230","Text":"With that said, if you’re planning"},{"Start":"04:15.230 ","End":"04:16.789","Text":"on copying you should make it"},{"Start":"04:16.790 ","End":"04:18.089","Text":"into a component, and we’ll"},{"Start":"04:18.089 ","End":"04:19.839","Text":"discuss that more in just a bit."},{"Start":"04:20.920 ","End":"04:23.260","Text":"Now let’s look at a few other"},{"Start":"04:23.260 ","End":"04:25.200","Text":"cons in regards to bodies:"},{"Start":"04:26.340 ","End":"04:27.909","Text":"First off, they won’t show up"},{"Start":"04:27.910 ","End":"04:29.509","Text":"in a parts list, which could be"},{"Start":"04:29.749 ","End":"04:31.270","Text":"troublesome if you need to create"},{"Start":"04:31.310 ","End":"04:33.780","Text":"a drawing with all of the parts"},{"Start":"04:34.610 ","End":"04:36.460","Text":"Second, patterned bodies will act"},{"Start":"04:36.500 ","End":"04:38.090","Text":"independently from their parent."},{"Start":"04:38.710 ","End":"04:40.570","Text":"So if I alter one of these bodies,"},{"Start":"04:40.639 ","End":"04:42.700","Text":"you’ll notice the others don’t change."},{"Start":"04:43.400 ","End":"04:44.900","Text":"Whereas if I had made them"},{"Start":"04:44.900 ","End":"04:47.320","Text":"components and I alter one, the"},{"Start":"04:47.389 ","End":"04:49.540","Text":"other two will update accordingly."},{"Start":"04:50.860 ","End":"04:52.390","Text":"If we take a look at the screws that"},{"Start":"04:52.390 ","End":"04:54.230","Text":"are bodies we’ll notice that components"},{"Start":"04:54.240 ","End":"04:55.980","Text":"can be created from anything that is"},{"Start":"04:55.980 ","End":"04:59.210","Text":"in the body folder here BUT components"},{"Start":"04:59.219 ","End":"05:01.239","Text":"cannot be created from sketches."},{"Start":"05:02.150 ","End":"05:03.560","Text":"If we right-click you’ll see that"},{"Start":"05:03.560 ","End":"05:05.210","Text":"there is no option to create a new"},{"Start":"05:05.230 ","End":"05:07.570","Text":"component, but if we right-click on a"},{"Start":"05:07.630 ","End":"05:10.000","Text":"body then we can create a new component."},{"Start":"05:11.240 ","End":"05:13.230","Text":"Now in order to turn a body into"},{"Start":"05:13.230 ","End":"05:14.960","Text":"a component, it does not have to"},{"Start":"05:14.970 ","End":"05:16.650","Text":"be closed and in fact, there are"},{"Start":"05:16.690 ","End":"05:18.500","Text":"three different types of bodies in"},{"Start":"05:18.509 ","End":"05:23.059","Text":"Fusion 360 - Solid/surface bodies,"},{"Start":"05:23.629 ","End":"05:26.470","Text":"sculpt bodies and mesh bodies."},{"Start":"05:27.880 ","End":"05:29.430","Text":"Now there are two main ways we"},{"Start":"05:29.430 ","End":"05:31.390","Text":"can create components from a body."},{"Start":"05:31.850 ","End":"05:33.590","Text":"We can either right-click on a body"},{"Start":"05:33.630 ","End":"05:35.430","Text":"and select “create components from"},{"Start":"05:35.430 ","End":"05:38.580","Text":"bodies” or we can go up to assemble"},{"Start":"05:38.710 ","End":"05:40.180","Text":"and hit “create new component,”"},{"Start":"05:41.000 ","End":"05:43.010","Text":"select “from bodies,” we’ll select"},{"Start":"05:43.020 ","End":"05:45.020","Text":"the body and then we can hit “okay.”"},{"Start":"05:46.280 ","End":"05:48.340","Text":"Another quick thing to note...if I select"},{"Start":"05:48.380 ","End":"05:50.689","Text":"two bodies here that does not mean it"},{"Start":"05:50.690 ","End":"05:52.229","Text":"will put them in the same component."},{"Start":"05:52.920 ","End":"05:55.139","Text":"If I go ahead and do that it will actually"},{"Start":"05:55.139 ","End":"05:57.919","Text":"create two different components...and"},{"Start":"05:57.920 ","End":"05:59.280","Text":"if we take a look at it in the"},{"Start":"05:59.280 ","End":"06:01.190","Text":"browser we’ll see the bodies here."},{"Start":"06:02.000 ","End":"06:04.050","Text":"Now another thing to note is that they"},{"Start":"06:04.050 ","End":"06:08.080","Text":"are both labeled body 1… so this is where"},{"Start":"06:08.080 ","End":"06:10.659","Text":"the dubbed Rule #2 from the Fusion 360"},{"Start":"06:10.670 ","End":"06:15.110","Text":"forum comes in… [drum roll] which is"},{"Start":"06:15.110 ","End":"06:18.179","Text":"to ALWAYS re-name your components and"},{"Start":"06:18.180 ","End":"06:20.309","Text":"bodies right after you create them…."},{"Start":"06:21.099 ","End":"06:22.919","Text":"And it\u0027s even a good idea to get into the"},{"Start":"06:22.919 ","End":"06:25.949","Text":"habit of re-naming any sketches, decals,"},{"Start":"06:25.979 ","End":"06:28.179","Text":"or any other layers you may have as well."},{"Start":"06:29.339 ","End":"06:30.969","Text":"So what the heck are components"},{"Start":"06:30.979 ","End":"06:32.339","Text":"and why should we use them?"},{"Start":"06:34.719 ","End":"06:36.099","Text":"If we take another look at our"},{"Start":"06:36.099 ","End":"06:37.640","Text":"door hinge example we’ll see"},{"Start":"06:37.640 ","End":"06:39.830","Text":"that components contain bodies,"},{"Start":"06:41.740 ","End":"06:44.250","Text":"sketches, planes, and other objects."},{"Start":"06:45.830 ","End":"06:47.340","Text":"These 3 components of our door"},{"Start":"06:47.340 ","End":"06:49.040","Text":"hinge makeup our assembly."},{"Start":"06:49.620 ","End":"06:51.590","Text":"At the beginning of this video, we talked"},{"Start":"06:51.590 ","End":"06:54.790","Text":"about bottom-up vs top-down assemblies...I"},{"Start":"06:54.790 ","End":"06:57.550","Text":"mentioned that fusion 360 is the top-down"},{"Start":"06:57.550 ","End":"06:59.240","Text":"assembly type because we can create"},{"Start":"06:59.300 ","End":"07:01.590","Text":"all of our components within the same"},{"Start":"07:01.590 ","End":"07:04.139","Text":"file and they’re driven by one another."},{"Start":"07:04.830 ","End":"07:06.739","Text":"So if we look at the browser we’ll see"},{"Start":"07:06.990 ","End":"07:08.810","Text":"that we have the master assembly at the"},{"Start":"07:08.830 ","End":"07:12.579","Text":"TOP and then we have the components nested"},{"Start":"07:14.309 ","End":"07:16.430","Text":"within it… The assembly is signified by"},{"Start":"07:16.430 ","End":"07:19.930","Text":"the 3 cube icon, the components are one"},{"Start":"07:19.930 ","End":"07:23.240","Text":"cube, and a body is a cylinder icon."},{"Start":"07:24.480 ","End":"07:25.430","Text":"Now let’s take a look at"},{"Start":"07:25.430 ","End":"07:26.800","Text":"some more advantages of"},{"Start":"07:26.800 ","End":"07:28.559","Text":"using components over bodies:"},{"Start":"07:30.539 ","End":"07:32.230","Text":"-You can drag bodies and other"},{"Start":"07:32.240 ","End":"07:33.659","Text":"objects from one component"},{"Start":"07:33.780 ","End":"07:35.340","Text":"to another in the browser."},{"Start":"07:36.130 ","End":"07:37.690","Text":"-A component can also contain"},{"Start":"07:37.740 ","End":"07:39.589","Text":"other components, which is often"},{"Start":"07:39.590 ","End":"07:40.930","Text":"referred to as a subassembly."},{"Start":"07:42.490 ","End":"07:44.669","Text":"-Components allow us to use joints"},{"Start":"07:44.780 ","End":"07:46.840","Text":"to assemble and create mechanical"},{"Start":"07:46.840 ","End":"07:49.440","Text":"relationships between components, such"},{"Start":"07:49.440 ","End":"07:51.390","Text":"as this door hinge example as you can see"},{"Start":"07:51.550 ","End":"07:53.590","Text":"it moves based on the joints I applied."},{"Start":"07:54.690 ","End":"07:56.590","Text":"But if I had created this with bodies"},{"Start":"07:56.620 ","End":"07:58.409","Text":"and not components, then I would"},{"Start":"07:58.410 ","End":"08:00.270","Text":"not be able to apply these joints."},{"Start":"08:00.330 ","End":"08:02.129","Text":"-Another trick and handy thing with"},{"Start":"08:02.129 ","End":"08:03.979","Text":"components is that you can activate"},{"Start":"08:03.979 ","End":"08:06.590","Text":"components, which offers many advantages."},{"Start":"08:07.840 ","End":"08:07.980","Text":"So let\u0027s take a look."},{"Start":"08:07.980 ","End":"08:13.469","Text":"If I activate this component"},{"Start":"08:13.519 ","End":"08:15.359","Text":"then I can focus solely on it,"},{"Start":"08:16.019 ","End":"08:17.070","Text":"and the other components will"},{"Start":"08:17.070 ","End":"08:18.949","Text":"be shown with some transparency."},{"Start":"08:19.749 ","End":"08:22.179","Text":"The advantage of activating components"},{"Start":"08:22.199 ","End":"08:25.180","Text":"means and bodies, sketches, components,"},{"Start":"08:25.189 ","End":"08:27.669","Text":"or other features I create will"},{"Start":"08:27.679 ","End":"08:30.340","Text":"be nested within that component."},{"Start":"08:31.809 ","End":"08:33.319","Text":"-Lastly, and probably one of"},{"Start":"08:33.319 ","End":"08:34.949","Text":"the most important things about"},{"Start":"08:34.949 ","End":"08:36.880","Text":"components is that they can be reused"},{"Start":"08:36.909 ","End":"08:39.529","Text":"or copy and pasted in a design."},{"Start":"08:40.479 ","End":"08:42.150","Text":"So we can do this by right-clicking"},{"Start":"08:42.159 ","End":"08:44.029","Text":"on the component and selecting copy"},{"Start":"08:44.030 ","End":"08:46.040","Text":"and paste..and we can duplicate"},{"Start":"08:46.040 ","End":"08:48.310","Text":"them as many times as we would like."},{"Start":"08:48.880 ","End":"08:50.479","Text":"And as we discussed earlier,"},{"Start":"08:50.500 ","End":"08:52.899","Text":"component instances update when"},{"Start":"08:52.900 ","End":"08:54.359","Text":"a change is made to one of them."},{"Start":"08:55.500 ","End":"08:57.599","Text":"Now having a basic understanding of"},{"Start":"08:57.599 ","End":"08:59.019","Text":"the difference between Bodies and"},{"Start":"08:59.020 ","End":"09:01.540","Text":"Components leads us to the dubbed Rule"},{"Start":"09:01.540 ","End":"09:05.319","Text":"#1 from the Fusion 360 forum which is..."},{"Start":"09:05.880 ","End":"09:10.080","Text":"[drum roll] to always start your"},{"Start":"09:10.080 ","End":"09:11.620","Text":"file off with a new component."},{"Start":"09:12.689 ","End":"09:15.380","Text":"Now Rule #1 was created by the Fusion 360"},{"Start":"09:15.380 ","End":"09:18.530","Text":"community on the forums, and the idea is"},{"Start":"09:18.540 ","End":"09:20.520","Text":"that if you always start with a component,"},{"Start":"09:20.640 ","End":"09:22.230","Text":"you’ll never be kicking yourself in the"},{"Start":"09:22.230 ","End":"09:24.290","Text":"foot when your browser tree is messed"},{"Start":"09:24.290 ","End":"09:26.020","Text":"up because you’re trying to create"},{"Start":"09:26.020 ","End":"09:28.359","Text":"components after creating your bodies."},{"Start":"09:29.819 ","End":"09:33.819","Text":"So let’s recap everything….It’s okay"},{"Start":"09:33.819 ","End":"09:35.650","Text":"to use bodies if you’re just creating"},{"Start":"09:35.650 ","End":"09:38.770","Text":"a small or quick model for something"},{"Start":"09:38.770 ","End":"09:41.270","Text":"like 3D printing, or something to play"},{"Start":"09:41.270 ","End":"09:46.610","Text":"around with that you don’t plan on using"},{"Start":"09:46.920 ","End":"09:49.349","Text":"any assembly features or copying it…"},{"Start":"09:50.040 ","End":"09:52.120","Text":"otherwise, it’s good practice to get"},{"Start":"09:52.120 ","End":"09:54.339","Text":"into the habit of always using components"},{"Start":"09:54.400 ","End":"09:56.790","Text":"at the beginning of your design, which"},{"Start":"09:56.790 ","End":"09:58.610","Text":"will ensure that you can successfully"},{"Start":"09:58.610 ","End":"10:01.239","Text":"create, joints, subassemblies, and"},{"Start":"10:01.240 ","End":"10:03.800","Text":"assemblies without any major headaches."},{"Start":"10:04.930 ","End":"10:06.680","Text":"As we took a look at previously...it"},{"Start":"10:06.720 ","End":"10:09.120","Text":"is possible to create components from"},{"Start":"10:09.120 ","End":"10:12.000","Text":"bodies BUT again it\u0027s not recommended"},{"Start":"10:12.010 ","End":"10:16.040","Text":"because it won’t always work and sometimes"},{"Start":"10:16.069 ","End":"10:18.430","Text":"it will cause errors in your model."}],"ID":28996},{"Watched":false,"Name":"Day 14 - 3D Model a Slot-Head Screwdriver","Duration":"14m 16s","ChapterTopicVideoID":27794,"CourseChapterTopicPlaylistID":275347,"HasSubtitles":true,"ThumbnailPath":null,"UploadDate":null,"DurationForVideoObject":null,"Description":null,"MetaTitle":null,"MetaDescription":null,"Canonical":null,"VideoComments":[],"Subtitles":[{"Start":"00:00.190 ","End":"00:00.929","Text":"Kevin Kennedy: Hey there, It’s"},{"Start":"00:00.930 ","End":"00:03.110","Text":"Kevin Kennedy, and welcome to Day"},{"Start":"00:03.110 ","End":"00:06.940","Text":"#14 of Learn Fusion 360 in 30 days."},{"Start":"00:07.270 ","End":"00:09.180","Text":"By the end of this tutorial, you’ll"},{"Start":"00:09.180 ","End":"00:11.480","Text":"be able to 3D model your very own"},{"Start":"00:11.490 ","End":"00:13.730","Text":"screwdriver, which of course, could"},{"Start":"00:13.740 ","End":"00:16.129","Text":"be 3D printed and actually used."},{"Start":"00:16.799 ","End":"00:18.349","Text":"We’ll take a look at how to create"},{"Start":"00:18.360 ","End":"00:20.830","Text":"components driven off of previous"},{"Start":"00:20.840 ","End":"00:22.810","Text":"components, and we’ll cover"},{"Start":"00:22.810 ","End":"00:25.430","Text":"the 3-point arc sketch feature."},{"Start":"00:26.270 ","End":"00:28.110","Text":"We’re going to start off by modeling"},{"Start":"00:28.110 ","End":"00:29.570","Text":"the handle of the screwdriver"},{"Start":"00:29.570 ","End":"00:31.329","Text":"as one component, and then we’ll"},{"Start":"00:31.330 ","End":"00:33.090","Text":"create a second component for"},{"Start":"00:33.090 ","End":"00:34.649","Text":"the shank of the screwdriver."},{"Start":"00:35.940 ","End":"00:37.960","Text":"To create a new component I’ll select"},{"Start":"00:37.980 ","End":"00:39.730","Text":"“new component” from the assemble"},{"Start":"00:39.740 ","End":"00:42.150","Text":"dropdown list, and I’ll double-check"},{"Start":"00:42.180 ","End":"00:44.160","Text":"that empty component is selected."},{"Start":"00:44.809 ","End":"00:47.070","Text":"Before we hit okay, we’ll follow rule"},{"Start":"00:47.070 ","End":"00:50.329","Text":"#2 of Fusion 360, which is to always"},{"Start":"00:50.370 ","End":"00:52.619","Text":"name your bodies and components."},{"Start":"00:53.379 ","End":"00:55.500","Text":"I’ll type in \"handle\" for the name,"},{"Start":"00:56.050 ","End":"00:58.210","Text":"make sure activate is selected so we"},{"Start":"00:58.210 ","End":"00:59.760","Text":"can start working in the component"},{"Start":"00:59.769 ","End":"01:02.400","Text":"right away, and I’ll click okay in"},{"Start":"01:02.400 ","End":"01:04.480","Text":"the “new component” dialogue box."},{"Start":"01:05.469 ","End":"01:06.840","Text":"Now let’s start to create the"},{"Start":"01:06.840 ","End":"01:08.929","Text":"handle by using the cylinder tool"},{"Start":"01:08.929 ","End":"01:10.839","Text":"from the create dropdown list."},{"Start":"01:12.199 ","End":"01:14.330","Text":"After selecting cylinder I’ll click"},{"Start":"01:14.330 ","End":"01:17.340","Text":"on the front face, click on the center"},{"Start":"01:17.340 ","End":"01:21.069","Text":"origin, drag-out with my mouse and"},{"Start":"01:21.179 ","End":"01:24.760","Text":"I’ll type in 28mm for the width… I’ll"},{"Start":"01:24.760 ","End":"01:26.659","Text":"hit the tab key to lock the dimension"},{"Start":"01:26.660 ","End":"01:28.660","Text":"in place and I’ll click with my"},{"Start":"01:28.660 ","End":"01:30.820","Text":"mouse to snap the circle in place."},{"Start":"01:32.060 ","End":"01:35.140","Text":"Then, I’ll make the length 100mm"},{"Start":"01:35.210 ","End":"01:37.330","Text":"and click okay to exit the cylinder"},{"Start":"01:37.330 ","End":"01:40.600","Text":"feature...and before we do anything"},{"Start":"01:40.600 ","End":"01:43.600","Text":"else I’ll rename the body “cylinder” by"},{"Start":"01:43.610 ","End":"01:45.809","Text":"double-clicking on it in the Fusion 360"},{"Start":"01:45.820 ","End":"01:48.469","Text":"Browser and I’ll type out “cylinder.”"},{"Start":"01:49.470 ","End":"01:52.150","Text":"I’ll also click on the save icon, type"},{"Start":"01:52.150 ","End":"01:54.710","Text":"out “Slot Head Screwdriver” for the name,"},{"Start":"01:55.210 ","End":"01:57.230","Text":"and I’ll click the blue save button."},{"Start":"01:58.179 ","End":"02:00.190","Text":"At this point, we could leave a basic"},{"Start":"02:00.190 ","End":"02:02.319","Text":"cylinder shape for the handle, but"},{"Start":"02:02.320 ","End":"02:04.189","Text":"it would work better and be more"},{"Start":"02:04.230 ","End":"02:06.210","Text":"ergonomic if we cut some grooves in it."},{"Start":"02:06.860 ","End":"02:08.039","Text":"To do this I’ll look at the"},{"Start":"02:08.039 ","End":"02:09.639","Text":"handle from the backside."},{"Start":"02:10.320 ","End":"02:12.340","Text":"Then, I’ll hit the keyboard shortcut"},{"Start":"02:12.380 ","End":"02:15.070","Text":"letter “C” for center circle and I’ll"},{"Start":"02:15.070 ","End":"02:17.100","Text":"click on the back face of the handle."},{"Start":"02:18.009 ","End":"02:20.659","Text":"What I want to do is draw a circle,"},{"Start":"02:20.770 ","End":"02:23.119","Text":"extrude cut it, and then I’ll pattern"},{"Start":"02:23.119 ","End":"02:25.130","Text":"the cut feature around the handle."},{"Start":"02:25.970 ","End":"02:27.620","Text":"So I’ll just click on the left side"},{"Start":"02:27.620 ","End":"02:29.470","Text":"here at the edge of the handle where the"},{"Start":"02:29.470 ","End":"02:31.870","Text":"center circle function will snap into"},{"Start":"02:31.870 ","End":"02:35.570","Text":"place, and I’ll make this circle 6mm."},{"Start":"02:36.790 ","End":"02:38.730","Text":"Now, I’ll hit the keyboard shortcut"},{"Start":"02:38.730 ","End":"02:41.200","Text":"letter “E” for extrude, and I’ll extrude"},{"Start":"02:41.230 ","End":"02:44.400","Text":"cut this 75mm and then I’ll click"},{"Start":"02:44.400 ","End":"02:46.679","Text":"“okay” to exit the extrude command."},{"Start":"02:48.020 ","End":"02:49.780","Text":"I’ll activate the circular pattern"},{"Start":"02:49.780 ","End":"02:52.500","Text":"feature located in the pattern folder"},{"Start":"02:52.559 ","End":"02:54.399","Text":"under the create dropdown menu."},{"Start":"02:55.520 ","End":"02:56.700","Text":"You’ll see that after we"},{"Start":"02:56.700 ","End":"02:58.209","Text":"activate the pattern feature"},{"Start":"02:58.250 ","End":"03:00.080","Text":"we can select the pattern type."},{"Start":"03:00.559 ","End":"03:02.519","Text":"I’ll select “features” as the pattern"},{"Start":"03:02.540 ","End":"03:03.989","Text":"type, and then I’ll select the"},{"Start":"03:03.990 ","End":"03:06.320","Text":"extrude feature in the timeline below."},{"Start":"03:07.450 ","End":"03:10.030","Text":"For the axis, I’ll select the center axis"},{"Start":"03:10.250 ","End":"03:12.760","Text":"of our handle, and remember if you ever"},{"Start":"03:12.760 ","End":"03:15.250","Text":"can’t select the axis here in the canvas"},{"Start":"03:15.650 ","End":"03:18.019","Text":"because it\u0027s blocked by a body, you can"},{"Start":"03:18.020 ","End":"03:21.250","Text":"select the axis in the Fusion 360 browser."},{"Start":"03:22.680 ","End":"03:24.630","Text":"We want this pattern to go all the way"},{"Start":"03:24.630 ","End":"03:27.019","Text":"around the handle so I’ll make sure"},{"Start":"03:27.170 ","End":"03:29.749","Text":"“full” is selected as the “type” and"},{"Start":"03:29.750 ","End":"03:31.880","Text":"then we’ll set 6 for the quantity,"},{"Start":"03:31.940 ","End":"03:33.989","Text":"or number of time’s to pattern."},{"Start":"03:34.900 ","End":"03:36.530","Text":"Looking at the model we can see a"},{"Start":"03:36.539 ","End":"03:38.540","Text":"faint preview of the pattern, but"},{"Start":"03:38.540 ","End":"03:41.340","Text":"let’s click okay to see the results."},{"Start":"03:43.620 ","End":"03:45.690","Text":"Now one thing to note here: we could’ve"},{"Start":"03:45.690 ","End":"03:48.170","Text":"used the sketch circular pattern and"},{"Start":"03:48.170 ","End":"03:50.039","Text":"patterned the circle around before"},{"Start":"03:50.040 ","End":"03:52.619","Text":"we extruded it, but I recommend"},{"Start":"03:52.619 ","End":"03:54.650","Text":"using the pattern feature under the"},{"Start":"03:54.650 ","End":"03:57.240","Text":"create dropdown list when possible,"},{"Start":"03:58.050 ","End":"03:59.280","Text":"as it will much perform better..."},{"Start":"04:01.420 ","End":"04:03.410","Text":"especially when dealing with larger and"},{"Start":"04:03.540 ","End":"04:06.289","Text":"more complex patterns and assemblies."},{"Start":"04:07.179 ","End":"04:09.560","Text":"The main reason is because the sketch tool"},{"Start":"04:09.589 ","End":"04:11.959","Text":"is trying to render all of the geometry,"},{"Start":"04:12.329 ","End":"04:14.230","Text":"whereas if we look at the sketch our"},{"Start":"04:14.230 ","End":"04:16.280","Text":"pattern feature is using, it’s simply"},{"Start":"04:16.280 ","End":"04:18.660","Text":"rendering the one circle, and the pattern"},{"Start":"04:18.660 ","End":"04:21.120","Text":"feature is mimicking the extrude cut."},{"Start":"04:22.040 ","End":"04:24.110","Text":"At this point, I want to add a nice fillet"},{"Start":"04:24.340 ","End":"04:26.499","Text":"or rounded edge to the back of the handle."},{"Start":"04:27.049 ","End":"04:28.890","Text":"I’ll select the keyboard shortcut letter"},{"Start":"04:28.949 ","End":"04:30.840","Text":"“F” to activate the fillet command."},{"Start":"04:31.420 ","End":"04:33.600","Text":"I’ll select all 6 of the outside edges,"},{"Start":"04:36.240 ","End":"04:38.690","Text":"and I’ll type in 10mm for the distance,"},{"Start":"04:39.410 ","End":"04:41.950","Text":"and of course, you can type in more or"},{"Start":"04:41.950 ","End":"04:44.980","Text":"less here depending on how much you want"},{"Start":"04:44.980 ","End":"04:47.149","Text":"the back of the handle rounded over."},{"Start":"04:47.750 ","End":"04:48.880","Text":"We’ll click okay to"},{"Start":"04:48.889 ","End":"04:50.250","Text":"exit the fillet command."},{"Start":"04:51.640 ","End":"04:53.710","Text":"Now, I’ll want to add a rounded"},{"Start":"04:53.720 ","End":"04:55.770","Text":"divet to the front of the screwdriver"},{"Start":"04:56.139 ","End":"04:58.089","Text":"so our thumb and forefinger have a"},{"Start":"04:58.090 ","End":"05:00.290","Text":"nice and ergonomic place to rest."},{"Start":"05:01.450 ","End":"05:02.770","Text":"I’ll right-click on the YZ"},{"Start":"05:02.770 ","End":"05:04.990","Text":"plane in the Fusion 360 browser"},{"Start":"05:05.359 ","End":"05:07.350","Text":"and I’ll select create sketch."},{"Start":"05:08.560 ","End":"05:09.860","Text":"We’re using this center plane"},{"Start":"05:09.860 ","End":"05:10.960","Text":"because we’re going to draw an"},{"Start":"05:10.960 ","End":"05:13.620","Text":"ellipse and then revolve it around."},{"Start":"05:15.360 ","End":"05:16.830","Text":"I’ll select the ellipse tool"},{"Start":"05:16.840 ","End":"05:19.239","Text":"from the sketch dropdown list and"},{"Start":"05:19.240 ","End":"05:20.970","Text":"I’ll click just above the handle."},{"Start":"05:23.570 ","End":"05:26.009","Text":"Now I’m not sure exactly how far down I"},{"Start":"05:26.009 ","End":"05:31.599","Text":"want to go, so I’ll just go down 6mm and"},{"Start":"05:31.600 ","End":"05:34.810","Text":"I’ll go to the right about 21mm as we can"},{"Start":"05:35.210 ","End":"05:37.319","Text":"also go back and change the dimensions."},{"Start":"05:38.559 ","End":"05:40.199","Text":"Now, I’ll select the revolve tool"},{"Start":"05:40.199 ","End":"05:42.619","Text":"from the create dropdown list, I’ll"},{"Start":"05:42.620 ","End":"05:44.560","Text":"select the ellipse we just created"},{"Start":"05:44.560 ","End":"05:47.000","Text":"as the profile, and once again we’ll"},{"Start":"05:47.000 ","End":"05:49.250","Text":"select the center access of our handle."},{"Start":"05:50.470 ","End":"05:52.010","Text":"I’ll make sure that my operation"},{"Start":"05:52.010 ","End":"05:53.979","Text":"is set to cut, and I’ll click"},{"Start":"05:53.980 ","End":"05:55.490","Text":"okay to see the results."},{"Start":"05:56.849 ","End":"05:59.219","Text":"Now looking at this divot I may decide"},{"Start":"05:59.219 ","End":"06:01.150","Text":"that I want this to go down a bit further."},{"Start":"06:01.580 ","End":"06:03.870","Text":"I’ll double click on the sketch in"},{"Start":"06:03.870 ","End":"06:05.470","Text":"the timeline to edit the ellipse"},{"Start":"06:05.470 ","End":"06:08.979","Text":"and I’ll change the height to 8mm."},{"Start":"06:13.549 ","End":"06:15.560","Text":"I’ll hit “stop sketch” and"},{"Start":"06:15.560 ","End":"06:17.299","Text":"take a look at the new results."},{"Start":"06:18.580 ","End":"06:19.790","Text":"Alrighty, our handle is"},{"Start":"06:19.820 ","End":"06:21.650","Text":"coming along nicely so far."},{"Start":"06:22.130 ","End":"06:24.060","Text":"The last thing we’ll want to do is add"},{"Start":"06:24.060 ","End":"06:26.250","Text":"some nice fillets or rounded edges to"},{"Start":"06:26.250 ","End":"06:28.550","Text":"it, and then we’ll proceed on to make"},{"Start":"06:28.550 ","End":"06:30.429","Text":"the shank and tip of the screwdriver."},{"Start":"06:31.639 ","End":"06:32.989","Text":"I’ll hit the keyboard shortcut"},{"Start":"06:32.990 ","End":"06:34.614","Text":"letter “F” to activate the fillet"},{"Start":"06:34.760 ","End":"06:36.540","Text":"command and I’ll select the"},{"Start":"06:36.550 ","End":"06:38.050","Text":"front circle of the screwdriver."},{"Start":"06:38.670 ","End":"06:42.090","Text":"I’ll add a fillet of 1.5mm and click okay."},{"Start":"06:43.100 ","End":"06:45.719","Text":"I’ll hit letter “F” again and I’ll select"},{"Start":"06:45.740 ","End":"06:47.570","Text":"the circles on each end of our divet"},{"Start":"06:48.210 ","End":"06:51.140","Text":"and I’ll make these 1mm and click okay."},{"Start":"06:52.119 ","End":"06:53.789","Text":"Lastly, we’ll go ahead and add some"},{"Start":"06:53.789 ","End":"06:55.589","Text":"nice rounded edges to our handle grips."},{"Start":"06:56.829 ","End":"06:58.120","Text":"Clicking letter “F” to"},{"Start":"06:58.120 ","End":"06:59.380","Text":"activate the fillet command..."},{"Start":"06:59.460 ","End":"07:01.210","Text":"I’ll select all 6 of the grip"},{"Start":"07:01.280 ","End":"07:06.200","Text":"edges, and then I’ll punch in"},{"Start":"07:06.210 ","End":"07:08.849","Text":"2.5mm for the fillet distance."},{"Start":"07:08.859 ","End":"07:10.310","Text":"I’ll click okay…."},{"Start":"07:11.809 ","End":"07:12.940","Text":"And then I’ll right-click on"},{"Start":"07:12.940 ","End":"07:14.880","Text":"this edge here and I’ll select"},{"Start":"07:14.880 ","End":"07:17.290","Text":"repeat fillet and I’ll select all"},{"Start":"07:17.360 ","End":"07:19.090","Text":"6 of these corresponding edges."},{"Start":"07:23.620 ","End":"07:25.219","Text":"I’ll make this edge rounded off"},{"Start":"07:25.230 ","End":"07:28.179","Text":"with 1mm and I’ll click okay."},{"Start":"07:31.469 ","End":"07:32.800","Text":"Now the last thing we’ll want"},{"Start":"07:32.810 ","End":"07:34.370","Text":"to do to our handle before we’re"},{"Start":"07:34.370 ","End":"07:36.010","Text":"done with this component is add"},{"Start":"07:36.010 ","End":"07:38.020","Text":"a hole for our screwdriver shank."},{"Start":"07:38.700 ","End":"07:40.140","Text":"I’ll hit the keyboard shortcut"},{"Start":"07:40.140 ","End":"07:42.420","Text":"letter “H” for Hole and I’ll click"},{"Start":"07:42.420 ","End":"07:44.040","Text":"on the front face of our handle."},{"Start":"07:45.130 ","End":"07:46.579","Text":"Now the hole should’ve snapped"},{"Start":"07:46.580 ","End":"07:47.770","Text":"to the center origin..."},{"Start":"07:47.920 ","End":"07:49.170","Text":"You’ll see if I drag this"},{"Start":"07:49.170 ","End":"07:51.070","Text":"hole around it will snap right"},{"Start":"07:51.080 ","End":"07:52.740","Text":"into that center origin point."},{"Start":"07:53.800 ","End":"07:54.880","Text":"We want our hole to go"},{"Start":"07:54.890 ","End":"07:56.240","Text":"halfway into the handle."},{"Start":"07:56.570 ","End":"07:58.139","Text":"In the hole dialogue box,"},{"Start":"07:58.179 ","End":"07:59.249","Text":"I’ll make the length 50mm."},{"Start":"07:59.889 ","End":"08:10.960","Text":"I’ll make the width of the hole 7mm"},{"Start":"08:11.430 ","End":"08:13.140","Text":"and then I’ll change the drill point to"},{"Start":"08:13.140 ","End":"08:16.480","Text":"“flat.” I’ll click “okay” to exit the"},{"Start":"08:16.480 ","End":"08:18.879","Text":"hole command and we are now officially"},{"Start":"08:18.880 ","End":"08:21.049","Text":"done with the handle of our screwdriver."},{"Start":"08:23.049 ","End":"08:24.279","Text":"At this point, we’ll want to"},{"Start":"08:24.280 ","End":"08:25.780","Text":"create a new component for"},{"Start":"08:25.780 ","End":"08:27.200","Text":"the shank of our screwdriver."},{"Start":"08:27.700 ","End":"08:29.370","Text":"But first, we’ll want to activate"},{"Start":"08:29.380 ","End":"08:31.130","Text":"the top-level component so our"},{"Start":"08:31.130 ","End":"08:33.209","Text":"new component is nested within it."},{"Start":"08:34.389 ","End":"08:36.239","Text":"To activate it I’ll click on the little"},{"Start":"08:36.240 ","End":"08:38.010","Text":"circle to the right of our file name."},{"Start":"08:39.000 ","End":"08:40.690","Text":"Once it’s activated I’ll select"},{"Start":"08:40.760 ","End":"08:42.630","Text":"“new component” from the assemble"},{"Start":"08:43.000 ","End":"08:45.510","Text":"dropdown list and I’ll rename"},{"Start":"08:45.510 ","End":"08:47.650","Text":"this one “shank” and click okay."},{"Start":"08:49.160 ","End":"08:51.630","Text":"Now you’ll see in the Fusion 360 browser"},{"Start":"08:51.660 ","End":"08:53.560","Text":"that the shank and the handle components"},{"Start":"08:53.620 ","End":"08:56.680","Text":"are nested under the screwdriver assembly."},{"Start":"08:58.859 ","End":"09:00.550","Text":"I’ll make sure that the shank component"},{"Start":"09:00.600 ","End":"09:04.579","Text":"is active...and then I’ll select the"},{"Start":"09:04.590 ","End":"09:07.630","Text":"face of our hole, this way if we change"},{"Start":"09:07.640 ","End":"09:09.629","Text":"the hole dimension later on, our shank"},{"Start":"09:09.630 ","End":"09:11.819","Text":"dimension will update accordingly"},{"Start":"09:12.510 ","End":"09:14.910","Text":"like we talked about it Day #13."},{"Start":"09:16.219 ","End":"09:17.360","Text":"I’ll hit the letter “E” for"},{"Start":"09:17.360 ","End":"09:19.040","Text":"extrude and then I’ll make the"},{"Start":"09:19.040 ","End":"09:25.640","Text":"distance 150mm and click okay."},{"Start":"09:27.260 ","End":"09:28.729","Text":"Now let’s click on the circle"},{"Start":"09:28.730 ","End":"09:30.329","Text":"next to the handle component to"},{"Start":"09:30.330 ","End":"09:31.860","Text":"re-activating it and we’ll take"},{"Start":"09:31.860 ","End":"09:33.259","Text":"a look at changing our hole size."},{"Start":"09:34.389 ","End":"09:35.480","Text":"I’ll double click on the hole"},{"Start":"09:35.490 ","End":"09:37.140","Text":"feature and change the width"},{"Start":"09:37.199 ","End":"09:39.569","Text":"to 10mm and then click okay."},{"Start":"09:40.800 ","End":"09:43.219","Text":"Then, I’ll re-activate our assembly and"},{"Start":"09:43.220 ","End":"09:44.840","Text":"you’ll see that the width of our shank"},{"Start":"09:44.920 ","End":"09:47.710","Text":"did update accordingly, as we expected."},{"Start":"09:48.940 ","End":"09:50.769","Text":"I’ll go ahead and click undo, to"},{"Start":"09:50.770 ","End":"09:52.669","Text":"revert back to the original size."},{"Start":"09:53.959 ","End":"09:55.680","Text":"Now all we have to do is create"},{"Start":"09:55.700 ","End":"09:57.590","Text":"our screwdriver tip, which we’ll"},{"Start":"09:57.590 ","End":"09:59.280","Text":"create a new component for."},{"Start":"10:00.160 ","End":"10:02.400","Text":"This time I’ll use another method."},{"Start":"10:02.520 ","End":"10:04.560","Text":"I’ll right-click on the top assembly"},{"Start":"10:04.599 ","End":"10:06.950","Text":"and select “new component.” I’ll"},{"Start":"10:06.950 ","End":"10:08.370","Text":"double click on the component in the"},{"Start":"10:08.380 ","End":"10:10.849","Text":"browser and type in “tip” for the name."},{"Start":"10:10.859 ","End":"10:16.190","Text":"I’ll select the front face of the"},{"Start":"10:16.190 ","End":"10:17.860","Text":"shank and click letter “E” on the"},{"Start":"10:17.860 ","End":"10:19.840","Text":"keyboard for extrude, and I’ll"},{"Start":"10:19.840 ","End":"10:22.260","Text":"punch in 10mm for the distance."},{"Start":"10:23.200 ","End":"10:24.710","Text":"I’ll make sure new body is"},{"Start":"10:24.710 ","End":"10:26.599","Text":"selected and I’ll click okay."},{"Start":"10:27.950 ","End":"10:30.289","Text":"And before I forget I’ll find the body in"},{"Start":"10:30.289 ","End":"10:33.440","Text":"the browser and rename it “slot head tip.”"},{"Start":"10:38.470 ","End":"10:39.640","Text":"Now we’re going to create the"},{"Start":"10:39.740 ","End":"10:42.320","Text":"slot or “flat head” tip by cutting"},{"Start":"10:42.320 ","End":"10:43.970","Text":"at this cylinder from the side."},{"Start":"10:44.639 ","End":"10:45.890","Text":"I’ll right-click on the YZ"},{"Start":"10:45.890 ","End":"10:48.150","Text":"plane and select create sketch."},{"Start":"10:49.029 ","End":"10:50.860","Text":"Then I’ll activate the 3-point"},{"Start":"10:50.870 ","End":"10:53.020","Text":"arc from the sketch dropdown list."},{"Start":"10:56.510 ","End":"10:58.129","Text":"For the first point, I’ll select the"},{"Start":"10:58.139 ","End":"10:59.849","Text":"front edge here where it snaps in"},{"Start":"10:59.849 ","End":"11:02.910","Text":"place, I’ll select the top line where"},{"Start":"11:02.910 ","End":"11:05.169","Text":"it snaps in place and then I’m just"},{"Start":"11:05.180 ","End":"11:06.910","Text":"going to put the 3rd point where it"},{"Start":"11:06.910 ","End":"11:09.510","Text":"creates that nice arc of a flathead."},{"Start":"11:11.610 ","End":"11:13.050","Text":"Now at this point, we’ll want to"},{"Start":"11:13.050 ","End":"11:15.139","Text":"fully define our sketch so we don’t"},{"Start":"11:15.150 ","End":"11:16.980","Text":"mess it up if we change dimensions"},{"Start":"11:17.030 ","End":"11:18.980","Text":"in any of our other components."},{"Start":"11:20.520 ","End":"11:22.299","Text":"I’ll hit letter “D” to activate the"},{"Start":"11:22.309 ","End":"11:24.240","Text":"dimension tool and I’ll click on"},{"Start":"11:24.240 ","End":"11:26.790","Text":"the end of the 3 point arc and I’ll"},{"Start":"11:26.790 ","End":"11:28.510","Text":"click on the center origin of our"},{"Start":"11:28.510 ","End":"11:33.060","Text":"tip and I’ll make this 0.5mm and"},{"Start":"11:33.060 ","End":"11:34.990","Text":"then hit the escape key to exit."},{"Start":"11:37.970 ","End":"11:39.569","Text":"You may have noticed the other"},{"Start":"11:39.589 ","End":"11:40.510","Text":"end of the 3-point arc moved."},{"Start":"11:40.510 ","End":"11:42.754","Text":"I’ll select that endpoint and I’ll select"},{"Start":"11:42.754 ","End":"11:50.370","Text":"the top point of the cylinder and select"},{"Start":"11:50.570 ","End":"11:54.249","Text":"the horizontal sketch constraint, this way"},{"Start":"11:54.520 ","End":"11:56.510","Text":"it’s always in line with the thickness of"},{"Start":"11:56.510 ","End":"11:59.129","Text":"the tip, even if we change our dimensions."},{"Start":"12:00.430 ","End":"12:02.520","Text":"Now in order to extrude cut this shape,"},{"Start":"12:02.530 ","End":"12:04.540","Text":"we’ll have to close off our profile."},{"Start":"12:05.530 ","End":"12:07.500","Text":"So we can hit letter “L” for line"},{"Start":"12:07.570 ","End":"12:11.670","Text":"and then draw a horizontal line and a"},{"Start":"12:11.679 ","End":"12:14.010","Text":"vertical line connecting the endpoints."},{"Start":"12:15.460 ","End":"12:17.440","Text":"Once again, before we cut this we’ll"},{"Start":"12:17.440 ","End":"12:18.820","Text":"also want to make sure that all"},{"Start":"12:18.820 ","End":"12:21.030","Text":"of our lines are black, indicating"},{"Start":"12:21.040 ","End":"12:22.550","Text":"that they are fully constrained."},{"Start":"12:23.790 ","End":"12:25.260","Text":"Using “D” on the keyboard"},{"Start":"12:25.260 ","End":"12:26.839","Text":"for dimension I’ll select the"},{"Start":"12:26.840 ","End":"12:29.970","Text":"horizontal line and make this 9mm."},{"Start":"12:30.750 ","End":"12:33.490","Text":"Then, you’ll notice the arc is still blue"},{"Start":"12:33.509 ","End":"12:35.660","Text":"because we can dimension the radius of it."},{"Start":"12:36.590 ","End":"12:37.449","Text":"So we’ll click on the"},{"Start":"12:37.460 ","End":"12:39.090","Text":"arc and then hit enter"},{"Start":"12:39.930 ","End":"12:42.329","Text":"and you’ll see that we now need to"},{"Start":"12:42.330 ","End":"12:43.677","Text":"fully constrain the vertical line."},{"Start":"12:43.677 ","End":"12:43.817","Text":"I’ll select both points of the line to"},{"Start":"12:43.817 ","End":"12:46.010","Text":"dimension it as well, and then you’ll"},{"Start":"12:46.010 ","End":"12:47.935","Text":"see we’re prompted with a warning that."},{"Start":"12:48.210 ","End":"12:50.229","Text":"I’ll hit letter “E” for extrude, select"},{"Start":"12:50.230 ","End":"12:54.770","Text":"the profile, and I’ll change the direction"},{"Start":"12:55.189 ","End":"12:58.410","Text":"to “two-sides.” We’ll need to change the"},{"Start":"12:58.410 ","End":"13:01.830","Text":"operation to cut, and for the extent of"},{"Start":"13:01.830 ","End":"13:04.539","Text":"each side we will select “all.” Now the"},{"Start":"13:04.540 ","End":"13:06.789","Text":"reason we’re selecting “all” is again"},{"Start":"13:06.799 ","End":"13:08.990","Text":"for the purposes of our dimensions."},{"Start":"13:11.639 ","End":"13:13.290","Text":"If we decided to make this shaft"},{"Start":"13:13.290 ","End":"13:15.350","Text":"thicker then our cut here will update"},{"Start":"13:15.350 ","End":"13:17.490","Text":"accordingly and we won’t have to go"},{"Start":"13:17.490 ","End":"13:20.109","Text":"back and edit this extrude cut manually."},{"Start":"13:20.900 ","End":"13:22.800","Text":"I’ll click okay to exit the extrude"},{"Start":"13:22.830 ","End":"13:24.830","Text":"command and now we’ll want to select"},{"Start":"13:24.840 ","End":"13:26.459","Text":"“mirror” from the create menu."},{"Start":"13:27.450 ","End":"13:28.909","Text":"We’ll change the pattern type"},{"Start":"13:28.920 ","End":"13:30.409","Text":"to “features” and we’ll select"},{"Start":"13:30.410 ","End":"13:32.140","Text":"the extrude in the timeline."},{"Start":"13:33.250 ","End":"13:35.480","Text":"For the midplane, I’ll select the XZ"},{"Start":"13:35.480 ","End":"13:37.770","Text":"plane in the browser and then I’ll click"},{"Start":"13:37.770 ","End":"13:39.809","Text":"okay to take a look at the results."},{"Start":"13:42.200 ","End":"13:43.630","Text":"Now we’re essentially done"},{"Start":"13:43.630 ","End":"13:45.100","Text":"with our slot-head screwdriver."},{"Start":"13:46.480 ","End":"13:48.810","Text":"We can reactivate the top-level component"},{"Start":"13:48.850 ","End":"13:51.470","Text":"to take a look at it...and of course, we"},{"Start":"13:51.470 ","End":"13:53.819","Text":"can always select a component, hit letter"},{"Start":"13:53.819 ","End":"13:56.390","Text":"“A” for appearances and we can drag and"},{"Start":"13:56.390 ","End":"13:58.700","Text":"drop the appearances onto each component."}],"ID":28997},{"Watched":false,"Name":"Day 15 - 3D Model a Painter’s Tripod","Duration":"11m 26s","ChapterTopicVideoID":27795,"CourseChapterTopicPlaylistID":275347,"HasSubtitles":true,"ThumbnailPath":null,"UploadDate":null,"DurationForVideoObject":null,"Description":null,"MetaTitle":null,"MetaDescription":null,"Canonical":null,"VideoComments":[],"Subtitles":[{"Start":"00:00.010 ","End":"00:00.770","Text":"Kevin Kennedy: Hey there, It’s"},{"Start":"00:00.770 ","End":"00:03.020","Text":"Kevin Kennedy, and welcome to Day"},{"Start":"00:03.020 ","End":"00:06.730","Text":"#15 of Learn Fusion 360 in 30 days."},{"Start":"00:07.240 ","End":"00:09.000","Text":"By the end of this tutorial,"},{"Start":"00:09.090 ","End":"00:10.680","Text":"you’ll be able to 3D model a"},{"Start":"00:10.719 ","End":"00:13.280","Text":"Painter’s Tripod for 3D printing."},{"Start":"00:13.650 ","End":"00:16.259","Text":"If you’re not familiar, a Painter’s Tripod"},{"Start":"00:16.299 ","End":"00:18.559","Text":"it’s a pyramid that you can rest items"},{"Start":"00:18.559 ","End":"00:21.220","Text":"on, with minimal contact, allowing you"},{"Start":"00:21.220 ","End":"00:24.000","Text":"to paint or stain both sides at once."},{"Start":"00:24.930 ","End":"00:26.380","Text":"We’ll take a look at how to loft to"},{"Start":"00:26.380 ","End":"00:29.479","Text":"a point, the project sketch feature,"},{"Start":"00:30.250 ","End":"00:31.719","Text":"the mirror feature using midplanes,"},{"Start":"00:32.990 ","End":"00:34.339","Text":"and we’ll talk about setting up"},{"Start":"00:34.340 ","End":"00:36.189","Text":"our file so we can change the"},{"Start":"00:36.200 ","End":"00:38.690","Text":"dimensions without causing any errors."},{"Start":"00:39.420 ","End":"00:41.260","Text":"To get started we’ll create a new"},{"Start":"00:41.290 ","End":"00:43.300","Text":"component by selecting new component"},{"Start":"00:43.300 ","End":"00:45.280","Text":"from the assemble dropdown list."},{"Start":"00:45.880 ","End":"00:47.580","Text":"I’ll title this Painter’s"},{"Start":"00:47.599 ","End":"00:49.520","Text":"Tripod and click okay."},{"Start":"00:51.460 ","End":"00:53.249","Text":"Now we’ll start to create the pyramid"},{"Start":"00:53.260 ","End":"00:55.780","Text":"by sketching a triangle for the base."},{"Start":"00:56.170 ","End":"00:57.490","Text":"I’ll hit letter “L” on the"},{"Start":"00:57.490 ","End":"00:59.530","Text":"keyboard for the line, and I’m"},{"Start":"00:59.530 ","End":"01:01.379","Text":"going to select the top plane."},{"Start":"01:02.519 ","End":"01:04.849","Text":"I’ll click on the center origin, and I’m"},{"Start":"01:04.849 ","End":"01:08.330","Text":"just going to drag and click 3 times,"},{"Start":"01:08.330 ","End":"01:11.079","Text":"creating a closed profile triangle shape,"},{"Start":"01:11.350 ","End":"01:13.970","Text":"without worrying about the size and shape."},{"Start":"01:13.980 ","End":"01:16.780","Text":"Now, while holding down the shift key,"},{"Start":"01:16.920 ","End":"01:19.110","Text":"I’ll select all three lines, and then"},{"Start":"01:19.110 ","End":"01:21.670","Text":"I’ll select the “equal” sketch constraint."},{"Start":"01:22.849 ","End":"01:25.170","Text":"So you’ll see that this immediately made"},{"Start":"01:25.179 ","End":"01:27.399","Text":"all three lines an equal size and if I"},{"Start":"01:27.440 ","End":"01:29.950","Text":"click on this point and drag the triangle"},{"Start":"01:30.299 ","End":"01:32.830","Text":"it will resize all three at the same time."},{"Start":"01:33.850 ","End":"01:36.250","Text":"I’m going to hit letter “D” on my keyboard"},{"Start":"01:36.250 ","End":"01:38.509","Text":"for dimension and I’ll select this top"},{"Start":"01:38.510 ","End":"01:41.530","Text":"line and enter 60 mm for the distance."},{"Start":"01:42.570 ","End":"01:44.130","Text":"After punching in the dimension"},{"Start":"01:44.160 ","End":"01:45.249","Text":"you’ll see that the other"},{"Start":"01:45.250 ","End":"01:47.960","Text":"lines changed to 60mm as well."},{"Start":"01:49.039 ","End":"01:50.870","Text":"Along with that, adding the dimension"},{"Start":"01:51.020 ","End":"01:53.080","Text":"also fully constrained our triangle"},{"Start":"01:53.080 ","End":"01:55.729","Text":"sketch, which is signified by all"},{"Start":"01:55.730 ","End":"01:58.470","Text":"the lines turning from blue to black."},{"Start":"01:59.960 ","End":"02:01.730","Text":"Now if I try to drag any of the"},{"Start":"02:01.730 ","End":"02:04.130","Text":"points around it won’t let me… all"},{"Start":"02:04.130 ","End":"02:06.120","Text":"that I can do is change the dimension"},{"Start":"02:06.120 ","End":"02:08.380","Text":"number… which is what we want, so"},{"Start":"02:08.380 ","End":"02:10.109","Text":"we know this triangle won’t change"},{"Start":"02:10.110 ","End":"02:12.280","Text":"size or shape unless we want it to."},{"Start":"02:13.980 ","End":"02:15.700","Text":"Before we go any further let’s"},{"Start":"02:15.700 ","End":"02:17.439","Text":"go ahead and save our design."},{"Start":"02:17.750 ","End":"02:19.250","Text":"I’ll click on the save icon,"},{"Start":"02:20.469 ","End":"02:22.949","Text":"type out “Painter’s Tripod,” and"},{"Start":"02:22.949 ","End":"02:24.720","Text":"I’ll click the blue save button."},{"Start":"02:26.330 ","End":"02:28.230","Text":"Now we’re going to create an offset"},{"Start":"02:28.230 ","End":"02:30.220","Text":"construction plane, in which we’ll create"},{"Start":"02:30.250 ","End":"02:33.170","Text":"a point on before we use the loft feature."},{"Start":"02:34.130 ","End":"02:35.590","Text":"I’ll select the offset plane"},{"Start":"02:35.590 ","End":"02:38.049","Text":"icon in my toolbar, or from the"},{"Start":"02:38.049 ","End":"02:40.200","Text":"construct dropdown list, and then"},{"Start":"02:40.200 ","End":"02:42.290","Text":"I’ll select the triangle sketch."},{"Start":"02:42.850 ","End":"02:45.000","Text":"I’ll type in 50mm for the"},{"Start":"02:45.530 ","End":"02:47.560","Text":"distance and then click okay."},{"Start":"02:48.760 ","End":"02:50.190","Text":"We’ll right-click on the plane,"},{"Start":"02:50.370 ","End":"02:52.140","Text":"and select create sketch."},{"Start":"02:52.750 ","End":"02:55.129","Text":"Now we could just insert a point here,"},{"Start":"02:55.170 ","End":"02:57.480","Text":"but instead, I’m going to first project"},{"Start":"02:57.480 ","End":"02:59.409","Text":"the sketch so we can reference it."},{"Start":"03:00.190 ","End":"03:01.950","Text":"I’m going to hit the keyboard shortcut"},{"Start":"03:01.950 ","End":"03:04.050","Text":"letter “P” for project, and then"},{"Start":"03:04.050 ","End":"03:05.950","Text":"I’ll select the 3 lines and click"},{"Start":"03:05.950 ","End":"03:08.529","Text":"okay...and I’ll show you why I’m"},{"Start":"03:08.530 ","End":"03:10.630","Text":"projecting this sketch in just a minute."},{"Start":"03:13.450 ","End":"03:15.630","Text":"First, I’m going to hit letter “X” for"},{"Start":"03:15.630 ","End":"03:17.430","Text":"the construction line, and you’ll see"},{"Start":"03:17.430 ","End":"03:19.690","Text":"in the sketch palette that if I keep"},{"Start":"03:19.700 ","End":"03:21.990","Text":"hitting the letter X key it will toggle"},{"Start":"03:21.990 ","End":"03:24.210","Text":"the construction line feature on and off."},{"Start":"03:24.680 ","End":"03:26.740","Text":"So I want it selected blue,"},{"Start":"03:26.750 ","End":"03:29.269","Text":"which is on, I’ll then hit the"},{"Start":"03:29.270 ","End":"03:31.459","Text":"keyboard letter “L” for line."},{"Start":"03:32.730 ","End":"03:34.550","Text":"I’m going to draw 2 construction"},{"Start":"03:34.550 ","End":"03:36.119","Text":"lines from the vertex of the"},{"Start":"03:36.120 ","End":"03:38.589","Text":"triangle to the opposite midpoint,"},{"Start":"03:38.690 ","End":"03:40.290","Text":"giving us the exact centroid, or"},{"Start":"03:41.440 ","End":"03:42.930","Text":"the centerpoint of the triangle."},{"Start":"03:46.280 ","End":"03:48.290","Text":"Now I’ll select the point feature from"},{"Start":"03:48.290 ","End":"03:50.230","Text":"the sketch dropdown menu, and I’ll"},{"Start":"03:50.230 ","End":"03:52.290","Text":"select where the two construction lines"},{"Start":"03:52.350 ","End":"03:55.060","Text":"intersect, and it should snap into place."},{"Start":"03:57.170 ","End":"03:59.079","Text":"I’ll hit the escape key to exit the"},{"Start":"03:59.080 ","End":"04:00.880","Text":"point command, and now we’re going"},{"Start":"04:00.880 ","End":"04:03.190","Text":"to loft from our base triangle to"},{"Start":"04:03.190 ","End":"04:04.660","Text":"the point that we just created."},{"Start":"04:05.570 ","End":"04:07.849","Text":"I’ll select loft from the create dropdown"},{"Start":"04:07.859 ","End":"04:14.292","Text":"menu, I’ll select the triangle profile"},{"Start":"04:14.292 ","End":"04:14.377","Text":"as the base and then I’ll select the"},{"Start":"04:14.377 ","End":"04:15.609","Text":"point, and it should connect the loft"},{"Start":"04:15.650 ","End":"04:18.799","Text":"without any additional guide rails..."},{"Start":"04:19.700 ","End":"04:20.950","Text":"and we’ll go ahead and click"},{"Start":"04:20.950 ","End":"04:23.230","Text":"okay in the loft dialogue box."},{"Start":"04:24.610 ","End":"04:26.260","Text":"Before we go any further I’ll"},{"Start":"04:26.260 ","End":"04:27.659","Text":"show you WHY I projected the"},{"Start":"04:27.660 ","End":"04:29.180","Text":"sketch to create our midpoint."},{"Start":"04:29.869 ","End":"04:31.380","Text":"So the reason I did that is"},{"Start":"04:31.380 ","End":"04:33.500","Text":"so our midpoint is driven by"},{"Start":"04:33.500 ","End":"04:35.240","Text":"our initial triangle sketch."},{"Start":"04:36.640 ","End":"04:38.200","Text":"If we double click on the original"},{"Start":"04:38.200 ","End":"04:39.800","Text":"triangle sketch and change the"},{"Start":"04:39.800 ","End":"04:42.490","Text":"dimensions to 100mm, and then click"},{"Start":"04:42.500 ","End":"04:45.949","Text":"stop sketch, you’ll see that the"},{"Start":"04:45.950 ","End":"04:48.369","Text":"midpoint is still exactly in the center."},{"Start":"04:49.610 ","End":"04:51.080","Text":"Now if you remember right after our"},{"Start":"04:51.080 ","End":"04:53.490","Text":"initial sketch we used the offset plane"},{"Start":"04:53.490 ","End":"04:55.780","Text":"feature… so if we want to manipulate"},{"Start":"04:55.780 ","End":"04:58.009","Text":"the height of our triangle all we have"},{"Start":"04:58.010 ","End":"04:59.620","Text":"to do is double click on the offset"},{"Start":"04:59.620 ","End":"05:02.229","Text":"plane in our timeline and we can"},{"Start":"05:02.230 ","End":"05:04.520","Text":"change the dimension and click okay."},{"Start":"05:05.920 ","End":"05:07.550","Text":"If there’s one thing that I want you to"},{"Start":"05:07.550 ","End":"05:09.610","Text":"learn in this tutorial it is [drumroll]"},{"Start":"05:09.750 ","End":"05:11.729","Text":"the idea that you should always be setting"},{"Start":"05:11.730 ","End":"05:13.659","Text":"up your models to where you can go back"},{"Start":"05:13.710 ","End":"05:16.539","Text":"and edit or change sizes without causing"},{"Start":"05:16.540 ","End":"05:18.970","Text":"any crazy shapes or errors in your model."},{"Start":"05:18.980 ","End":"05:22.165","Text":"I know for this pyramid it may not seem"},{"Start":"05:22.270 ","End":"05:24.940","Text":"like that big of a deal, but as you"},{"Start":"05:24.940 ","End":"05:26.940","Text":"start to create more advanced components"},{"Start":"05:26.940 ","End":"05:28.960","Text":"and assemblies, keeping this in mind"},{"Start":"05:28.970 ","End":"05:31.050","Text":"will save you a ton of time and you’ll"},{"Start":"05:31.050 ","End":"05:33.219","Text":"hopefully avoid a lot of frustration."},{"Start":"05:35.670 ","End":"05:37.170","Text":"I’m going to go ahead and click"},{"Start":"05:37.200 ","End":"05:38.879","Text":"undo a few times until we’re"},{"Start":"05:38.880 ","End":"05:40.779","Text":"in the original dimensions and"},{"Start":"05:40.779 ","End":"05:42.409","Text":"then I’ll click stop sketch."},{"Start":"05:44.150 ","End":"05:45.760","Text":"Now we’ll want to shell out this"},{"Start":"05:45.760 ","End":"05:47.690","Text":"item so we’re not wasting any more"},{"Start":"05:47.780 ","End":"05:49.610","Text":"3D printing filament than we need to."},{"Start":"05:50.809 ","End":"05:52.629","Text":"I’ll select shell from the modify"},{"Start":"05:52.639 ","End":"05:55.210","Text":"dropdown list, click on the bottom"},{"Start":"05:55.210 ","End":"05:59.399","Text":"surface of the pyramid, and type in 2.5mm"},{"Start":"05:59.420 ","End":"06:02.140","Text":"for the thickness and I’ll click okay."},{"Start":"06:04.390 ","End":"06:06.140","Text":"One of the last things we’ll do here"},{"Start":"06:06.150 ","End":"06:07.920","Text":"is cut out some circles on the side."},{"Start":"06:08.570 ","End":"06:10.420","Text":"Again, this is going to help us save"},{"Start":"06:10.420 ","End":"06:12.130","Text":"on filament, and it really shouldn’t"},{"Start":"06:12.139 ","End":"06:14.259","Text":"take away much of the shapes strength…"},{"Start":"06:15.120 ","End":"06:16.779","Text":"and for those of you who are familiar"},{"Start":"06:16.779 ","End":"06:19.070","Text":"with 3D printing, you likely know"},{"Start":"06:19.070 ","End":"06:20.930","Text":"that a circular shape like this can"},{"Start":"06:20.930 ","End":"06:23.570","Text":"be printed with no problems since each"},{"Start":"06:23.570 ","End":"06:25.670","Text":"layer comes out just a bit further."},{"Start":"06:27.059 ","End":"06:28.349","Text":"I’m going to hit letter “P”"},{"Start":"06:28.349 ","End":"06:30.200","Text":"for project and I’ll select one"},{"Start":"06:30.200 ","End":"06:31.549","Text":"of the sides of the pyramid."},{"Start":"06:32.969 ","End":"06:34.899","Text":"Then, I’ll select all 3 lines"},{"Start":"06:34.910 ","End":"06:36.029","Text":"that make up the face of the"},{"Start":"06:36.030 ","End":"06:38.190","Text":"triangle and then click okay."},{"Start":"06:39.350 ","End":"06:40.940","Text":"I’ll hit letter “X” to turn on"},{"Start":"06:40.940 ","End":"06:42.870","Text":"the construction line and I’ll hit"},{"Start":"06:42.870 ","End":"06:45.180","Text":"letter “L” to draw two lines from"},{"Start":"06:45.180 ","End":"06:47.440","Text":"a vertex to the opposite midpoint."},{"Start":"06:53.400 ","End":"06:55.800","Text":"Once we have our centroid or center point"},{"Start":"06:55.800 ","End":"06:58.200","Text":"of the triangle, I’ll click “X” on the"},{"Start":"06:58.200 ","End":"07:00.960","Text":"keyboard to turn off the construction"},{"Start":"07:00.960 ","End":"07:02.960","Text":"feature and then I’ll hit the keyboard"},{"Start":"07:02.960 ","End":"07:05.359","Text":"shortcut letter “C” for center-circle."},{"Start":"07:06.809 ","End":"07:09.770","Text":"I’ll select where the lines meet...I’ll"},{"Start":"07:09.770 ","End":"07:12.069","Text":"drag out with my mouse and I’ll type in"},{"Start":"07:12.740 ","End":"07:18.730","Text":"25mm, hit the tab key and of course click"},{"Start":"07:18.730 ","End":"07:21.070","Text":"with my mouse to set the circle in place."},{"Start":"07:23.380 ","End":"07:25.239","Text":"Now to cut this circle away I’ll hit"},{"Start":"07:25.240 ","End":"07:27.980","Text":"letter “E” for extrude, select the"},{"Start":"07:27.980 ","End":"07:30.610","Text":"circle… and for the “extent” we’ll"},{"Start":"07:30.620 ","End":"07:33.360","Text":"want to select \u0027too object,\u0027 which will"},{"Start":"07:33.360 ","End":"07:35.380","Text":"allow us to select the inside of that"},{"Start":"07:35.420 ","End":"07:38.140","Text":"triangle surface, again ensuring that"},{"Start":"07:38.140 ","End":"07:40.150","Text":"if we changed the shell thickness or"},{"Start":"07:40.210 ","End":"07:42.729","Text":"anything else then we wouldn’t have"},{"Start":"07:42.730 ","End":"07:44.399","Text":"to go back and edit this extrude cut."},{"Start":"07:50.020 ","End":"07:51.789","Text":"Looking at the extrude cut preview"},{"Start":"07:51.800 ","End":"07:53.210","Text":"you can see that our cut looks"},{"Start":"07:53.210 ","End":"07:54.719","Text":"right so we’ll click okay to"},{"Start":"07:54.720 ","End":"07:56.709","Text":"close the extrude dialogue box."},{"Start":"07:57.670 ","End":"07:59.559","Text":"Now we could create the other two holes"},{"Start":"07:59.570 ","End":"08:03.930","Text":"one-by-one following the same steps, or"},{"Start":"08:04.119 ","End":"08:06.419","Text":"we could mirror the extruded cut onto"},{"Start":"08:06.440 ","End":"08:08.310","Text":"the other two sides of the pyramid."},{"Start":"08:10.470 ","End":"08:11.940","Text":"If we take a look at the pyramid from"},{"Start":"08:11.940 ","End":"08:14.190","Text":"the bottom it may seem a bit tricky"},{"Start":"08:14.190 ","End":"08:15.520","Text":"because if we mirror our features"},{"Start":"08:15.530 ","End":"08:17.500","Text":"straight across they’ll end up at the"},{"Start":"08:17.509 ","End":"08:20.589","Text":"vertex and not the face of the pyramid."},{"Start":"08:21.690 ","End":"08:23.490","Text":"Therefore, we’re going to have to create"},{"Start":"08:23.549 ","End":"08:25.550","Text":"a few midplanes that we can reference"},{"Start":"08:25.580 ","End":"08:27.250","Text":"before we use the mirror command."},{"Start":"08:29.020 ","End":"08:30.869","Text":"To create the midplanes I’ll select"},{"Start":"08:31.360 ","End":"08:33.089","Text":"“midplane” from the construct dropdown"},{"Start":"08:33.090 ","End":"08:35.890","Text":"menu… and all we have to do is select the"},{"Start":"08:35.890 ","End":"08:39.770","Text":"left face and the right face and you’ll"},{"Start":"08:39.770 ","End":"08:41.209","Text":"see that it creates a nice midplane"},{"Start":"08:42.539 ","End":"08:44.380","Text":"in between the faces we selected."},{"Start":"08:46.460 ","End":"08:48.370","Text":"So let’s right-click on the bottom face"},{"Start":"08:48.400 ","End":"08:50.760","Text":"and select repeat midplane, and then"},{"Start":"08:50.760 ","End":"08:52.983","Text":"we’ll select our left face… giving us a"},{"Start":"08:52.983 ","End":"08:55.200","Text":"midplane between these other two faces."},{"Start":"08:57.420 ","End":"08:59.489","Text":"Now we can mirror the extrude"},{"Start":"08:59.590 ","End":"09:00.940","Text":"cut to the other sides."},{"Start":"09:01.220 ","End":"09:02.319","Text":"I’ll select mirror from"},{"Start":"09:02.320 ","End":"09:03.730","Text":"the create dropdown menu."},{"Start":"09:04.400 ","End":"09:06.500","Text":"Then, in the mirror dialogue box,"},{"Start":"09:06.520 ","End":"09:08.330","Text":"we’ll need to select features as the"},{"Start":"09:08.330 ","End":"09:10.620","Text":"pattern type, allowing us to select"},{"Start":"09:10.650 ","End":"09:12.320","Text":"the extrude cut in the timeline."},{"Start":"09:13.590 ","End":"09:15.140","Text":"For the mirror plane, we’ll select"},{"Start":"09:15.179 ","End":"09:18.420","Text":"either one and we’ll change the compute"},{"Start":"09:18.470 ","End":"09:20.850","Text":"option to optimized because it uses"},{"Start":"09:20.860 ","End":"09:23.060","Text":"the least amount of code and will run"},{"Start":"09:23.060 ","End":"09:25.339","Text":"the fastest, although I should note"},{"Start":"09:25.340 ","End":"09:27.260","Text":"that optimized doesn’t always work"},{"Start":"09:27.260 ","End":"09:29.020","Text":"for more complex mirrored objects."},{"Start":"09:30.500 ","End":"09:32.680","Text":"I’ll also put a more detailed"},{"Start":"09:32.680 ","End":"09:35.219","Text":"write-up of these 3 compute options"},{"Start":"09:35.289 ","End":"09:38.579","Text":"in the comments of the video...Now"},{"Start":"09:38.580 ","End":"09:40.460","Text":"if we click okay you’ll see that it"},{"Start":"09:40.470 ","End":"09:42.730","Text":"successfully mirrored our extrude cut."},{"Start":"09:42.740 ","End":"09:43.085","Text":"Now we just have to repeat"},{"Start":"09:43.085 ","End":"09:43.474","Text":"these steps for the last side."},{"Start":"09:43.540 ","End":"09:45.599","Text":"I’ll select the extrude cut in the"},{"Start":"09:45.610 ","End":"09:48.169","Text":"timeline \u003e right click and select"},{"Start":"09:48.259 ","End":"09:51.200","Text":"repeat mirror \u003e this way our pattern"},{"Start":"09:51.219 ","End":"09:53.339","Text":"type and object are both already"},{"Start":"09:53.340 ","End":"09:55.550","Text":"selected for us, so we’ll just have"},{"Start":"09:55.550 ","End":"09:56.990","Text":"to select our other midplane..."},{"Start":"09:58.190 ","End":"09:59.460","Text":"and then we’ll change the compute"},{"Start":"10:00.070 ","End":"10:02.440","Text":"to optimized and click okay."},{"Start":"10:04.380 ","End":"10:05.550","Text":"The last thing we’ll want to do"},{"Start":"10:05.880 ","End":"10:07.709","Text":"is add nice rounded edges to our"},{"Start":"10:07.710 ","End":"10:10.019","Text":"model before we export to 3d print."},{"Start":"10:11.330 ","End":"10:13.070","Text":"We can hide these planes out of the way"},{"Start":"10:13.070 ","End":"10:15.180","Text":"by selecting them and hitting the keyboard"},{"Start":"10:15.180 ","End":"10:18.770","Text":"shortcut letter “V” to view/hide objects."},{"Start":"10:23.120 ","End":"10:24.640","Text":"I’ll hit the keyboard shortcut letter"},{"Start":"10:24.750 ","End":"10:27.410","Text":"“F” for fillet, and I’ll select the"},{"Start":"10:27.410 ","End":"10:29.280","Text":"3 lines that make up the top of the"},{"Start":"10:29.280 ","End":"10:32.599","Text":"pyramid as well as all 6 edges of"},{"Start":"10:32.600 ","End":"10:40.900","Text":"the circles… I’ll enter 1.5mm for the"},{"Start":"10:41.100 ","End":"10:43.800","Text":"fillet radius to give it a nice and"},{"Start":"10:43.800 ","End":"10:46.189","Text":"subtle rounded edge, and I’ll click"},{"Start":"10:46.190 ","End":"10:48.230","Text":"okay to exit the fillet command."},{"Start":"10:51.690 ","End":"10:54.910","Text":"If you do want to 3D print some of these"},{"Start":"10:54.910 ","End":"10:56.680","Text":"Painter’s Tripods then you can simply"},{"Start":"10:56.680 ","End":"10:58.599","Text":"right-click on the component and select"},{"Start":"10:58.650 ","End":"11:02.829","Text":"save as “.stl” From there you can select"},{"Start":"11:03.990 ","End":"11:06.010","Text":"the object, and you can either click"},{"Start":"11:06.010 ","End":"11:08.210","Text":"okay to save the file to your local hard"},{"Start":"11:08.220 ","End":"11:12.100","Text":"drive OR you can check “send to 3D print"},{"Start":"11:12.110 ","End":"11:14.679","Text":"utility” and select your 3D printer’s"},{"Start":"11:14.679 ","End":"11:21.270","Text":"slicing software, which should open"},{"Start":"11:21.270 ","End":"11:23.629","Text":"up with the file after you click okay."}],"ID":28998},{"Watched":false,"Name":"Day 16 - Adding Constraints","Duration":"12m 34s","ChapterTopicVideoID":27796,"CourseChapterTopicPlaylistID":275347,"HasSubtitles":true,"ThumbnailPath":null,"UploadDate":null,"DurationForVideoObject":null,"Description":null,"MetaTitle":null,"MetaDescription":null,"Canonical":null,"VideoComments":[],"Subtitles":[{"Start":"00:00.100 ","End":"00:00.870","Text":"Kevin Kennedy: Hey there, It’s"},{"Start":"00:00.870 ","End":"00:02.949","Text":"Kevin Kennedy, and welcome to Day"},{"Start":"00:03.610 ","End":"00:06.570","Text":"#16 of Learn Fusion 360 in 30 days."},{"Start":"00:06.730 ","End":"00:08.690","Text":"By the end of this tutorial, you’ll have"},{"Start":"00:08.690 ","End":"00:11.380","Text":"a solid understanding of how to manually"},{"Start":"00:11.410 ","End":"00:14.229","Text":"apply sketch constraints in Fusion 360."},{"Start":"00:14.809 ","End":"00:16.199","Text":"You may have noticed in the sketch"},{"Start":"00:16.209 ","End":"00:17.899","Text":"palette there are a number of"},{"Start":"00:17.900 ","End":"00:19.099","Text":"different sketch constraints."},{"Start":"00:19.680 ","End":"00:21.400","Text":"In this video, I’ll explain what"},{"Start":"00:21.400 ","End":"00:23.480","Text":"constraints are, why you should use"},{"Start":"00:23.480 ","End":"00:25.520","Text":"them, and I’ll walk you through each"},{"Start":"00:25.530 ","End":"00:27.729","Text":"constraint by demoing what they do."},{"Start":"00:34.019 ","End":"00:35.529","Text":"To get started I’ll open up"},{"Start":"00:35.539 ","End":"00:37.750","Text":"the “constraints demo” file."},{"Start":"00:38.310 ","End":"00:40.190","Text":"I put a link to this demo file in the"},{"Start":"00:40.190 ","End":"00:42.750","Text":"video description so you can follow along"},{"Start":"00:42.780 ","End":"00:44.850","Text":"and practice using these constraints."},{"Start":"00:45.550 ","End":"00:47.440","Text":"I’ll double click on the sketch titled"},{"Start":"00:47.469 ","End":"00:49.639","Text":"“constraints demo” located in the"},{"Start":"00:49.659 ","End":"00:52.269","Text":"sketch folder of the Fusion 360 browser."},{"Start":"00:52.889 ","End":"00:54.420","Text":"Double-clicking will activate"},{"Start":"00:54.430 ","End":"00:55.840","Text":"and open up the sketch."},{"Start":"00:57.070 ","End":"00:58.760","Text":"Once the sketch is opened you’ll"},{"Start":"00:58.760 ","End":"01:01.309","Text":"see the sketch palette dialogue box."},{"Start":"01:01.960 ","End":"01:04.070","Text":"Then, if you look at the sketch palette"},{"Start":"01:04.110 ","End":"01:05.229","Text":"you’ll want to make sure that your"},{"Start":"01:05.230 ","End":"01:07.789","Text":"constraints list is toggled to open."},{"Start":"01:08.299 ","End":"01:09.790","Text":"So if I just click on the arrow"},{"Start":"01:09.790 ","End":"01:11.310","Text":"here, you’ll see that it will"},{"Start":"01:11.310 ","End":"01:13.130","Text":"toggle from open to closed."},{"Start":"01:15.370 ","End":"01:17.460","Text":"Before we cover what each constraint"},{"Start":"01:17.470 ","End":"01:18.810","Text":"does, it’s important that you"},{"Start":"01:18.810 ","End":"01:20.640","Text":"understand what constraints are"},{"Start":"01:20.840 ","End":"01:22.530","Text":"and why you should use them."},{"Start":"01:23.730 ","End":"01:25.919","Text":"Constraints allow you to relate one"},{"Start":"01:25.920 ","End":"01:28.529","Text":"sketch entity to another sketch entity."},{"Start":"01:29.410 ","End":"01:31.790","Text":"If you look at the constraint icons in"},{"Start":"01:31.800 ","End":"01:34.110","Text":"the sketch palette you’ll see that sketch"},{"Start":"01:34.110 ","End":"01:36.890","Text":"constraints use geometric expressions,"},{"Start":"01:37.020 ","End":"01:39.710","Text":"with the exception of fix/unfix."},{"Start":"01:41.920 ","End":"01:43.250","Text":"Now let’s talk about why to"},{"Start":"01:43.250 ","End":"01:44.710","Text":"use these sketch constraints."},{"Start":"01:45.049 ","End":"01:46.690","Text":"These sketch constraints allow"},{"Start":"01:46.690 ","End":"01:48.600","Text":"you to maintain certain behaviors"},{"Start":"01:48.600 ","End":"01:50.160","Text":"when the sketch is updated."},{"Start":"01:50.740 ","End":"01:53.000","Text":"Constraints help the sketch stay intact,"},{"Start":"01:53.210 ","End":"01:54.770","Text":"ensuring that elements don’t break"},{"Start":"01:54.770 ","End":"01:57.429","Text":"apart or move to unpredictable areas."},{"Start":"01:58.429 ","End":"02:00.190","Text":"So to repeat this, you’ll want to"},{"Start":"02:00.200 ","End":"02:02.249","Text":"use sketch constraints to maintain"},{"Start":"02:02.250 ","End":"02:03.910","Text":"the shape of your sketch so your"},{"Start":"02:03.910 ","End":"02:06.990","Text":"sketch stays 100% predictable… with"},{"Start":"02:07.040 ","End":"02:09.900","Text":"emphasis on the 100%, because if you’re"},{"Start":"02:09.900 ","End":"02:11.810","Text":"constraining AND dimensioning your"},{"Start":"02:11.810 ","End":"02:13.519","Text":"sketches correctly then you should"},{"Start":"02:13.590 ","End":"02:15.720","Text":"always know what is going to happen when"},{"Start":"02:15.720 ","End":"02:17.800","Text":"you make a change within the sketch."},{"Start":"02:19.099 ","End":"02:20.320","Text":"Now let’s walk through these"},{"Start":"02:20.320 ","End":"02:21.759","Text":"constraints to show what each one"},{"Start":"02:21.759 ","End":"02:23.629","Text":"does, starting from the top and"},{"Start":"02:23.629 ","End":"02:25.220","Text":"working our way down the list here."},{"Start":"02:26.620 ","End":"02:28.270","Text":"The first constraint we see is"},{"Start":"02:28.270 ","End":"02:30.620","Text":"“coincident” which forces the geometry"},{"Start":"02:30.640 ","End":"02:32.649","Text":"of two sketch entities to touch."},{"Start":"02:33.290 ","End":"02:35.359","Text":"Now to activate any constraint we’ll"},{"Start":"02:35.360 ","End":"02:37.119","Text":"have to click on it in the sketch"},{"Start":"02:37.130 ","End":"02:39.199","Text":"palette, and you’ll notice it shows"},{"Start":"02:39.200 ","End":"02:41.239","Text":"it’s active by the blue highlight."},{"Start":"02:41.949 ","End":"02:43.820","Text":"To add a coincident constraint we"},{"Start":"02:43.820 ","End":"02:46.550","Text":"can either select a point or a line."},{"Start":"02:47.810 ","End":"02:49.730","Text":"If I select this line first, then"},{"Start":"02:49.730 ","End":"02:51.369","Text":"you’ll see that as I hover over the"},{"Start":"02:51.939 ","End":"02:54.670","Text":"lines it only highlights the points."},{"Start":"02:55.549 ","End":"02:57.689","Text":"In this case, points are all that I can"},{"Start":"02:57.690 ","End":"02:59.869","Text":"use to complete the coincident constraint."},{"Start":"03:00.760 ","End":"03:01.905","Text":"I’ll select the end of the"},{"Start":"03:02.000 ","End":"03:03.520","Text":"line and then you’ll see that"},{"Start":"03:03.520 ","End":"03:05.190","Text":"the lines are joined together."},{"Start":"03:06.520 ","End":"03:08.120","Text":"You’ll also notice the glyph or"},{"Start":"03:08.170 ","End":"03:10.560","Text":"icon that represents the coincident"},{"Start":"03:10.560 ","End":"03:12.620","Text":"constraint was added so we know"},{"Start":"03:12.620 ","End":"03:14.069","Text":"how this area is constrained."},{"Start":"03:14.950 ","End":"03:16.520","Text":"Now that we’ve added the coincident"},{"Start":"03:16.520 ","End":"03:18.660","Text":"constraint we can drag this horizontal"},{"Start":"03:18.660 ","End":"03:21.430","Text":"line up or down and you’ll see that the"},{"Start":"03:21.430 ","End":"03:23.989","Text":"vertical line will always stay connected."},{"Start":"03:26.780 ","End":"03:29.170","Text":"The next constraint is “collinear”"},{"Start":"03:29.170 ","End":"03:31.450","Text":"which forces two lines to share a single"},{"Start":"03:31.480 ","End":"03:34.529","Text":"axis… and they can be at any angle..."},{"Start":"03:34.559 ","End":"03:35.519","Text":"they do not have to be"},{"Start":"03:35.519 ","End":"03:37.609","Text":"vertical or horizontal lines."},{"Start":"03:38.640 ","End":"03:40.750","Text":"I should also point out that the order in"},{"Start":"03:40.750 ","End":"03:43.299","Text":"which you select the lines DOES matter."},{"Start":"03:43.800 ","End":"03:45.670","Text":"The first entity you choose will"},{"Start":"03:45.670 ","End":"03:47.649","Text":"remain in place, and the second"},{"Start":"03:47.690 ","End":"03:50.280","Text":"entity will satisfy the constraint."},{"Start":"03:51.880 ","End":"03:53.629","Text":"If I want this top line to be on the"},{"Start":"03:53.629 ","End":"03:56.640","Text":"same axis as this other line here then"},{"Start":"03:56.640 ","End":"03:59.190","Text":"making sure “collinear is active” I"},{"Start":"03:59.190 ","End":"04:00.980","Text":"can simply click on the first line,"},{"Start":"04:00.980 ","End":"04:02.980","Text":"which will be used as the axis,"},{"Start":"04:03.650 ","End":"04:05.720","Text":"and as I click on the second line"},{"Start":"04:05.730 ","End":"04:07.360","Text":"you’ll see that it moved to that same"},{"Start":"04:07.400 ","End":"04:09.950","Text":"axis...and added the collinear glyph."},{"Start":"04:11.590 ","End":"04:13.480","Text":"Now to escape the constraint feature"},{"Start":"04:13.520 ","End":"04:15.309","Text":"I can either hit the escape key on my"},{"Start":"04:15.310 ","End":"04:18.409","Text":"keyboard, select the constraint again,"},{"Start":"04:19.060 ","End":"04:21.300","Text":"or I can click the selection button in"},{"Start":"04:21.300 ","End":"04:24.130","Text":"the toolbar…and if I drag one of these"},{"Start":"04:24.130 ","End":"04:25.849","Text":"lines around you’ll notice that they"},{"Start":"04:25.849 ","End":"04:28.469","Text":"will now always stay on the same axis."},{"Start":"04:30.990 ","End":"04:32.989","Text":"The next constraint is “concentric,”"},{"Start":"04:33.030 ","End":"04:34.600","Text":"which forces circular sketch"},{"Start":"04:34.600 ","End":"04:36.450","Text":"elements, such as circles and arcs,"},{"Start":"04:36.490 ","End":"04:38.570","Text":"to share a common center point."},{"Start":"04:39.790 ","End":"04:41.299","Text":"So if I wanted to ensure that this"},{"Start":"04:41.300 ","End":"04:43.319","Text":"circle has the same center point as"},{"Start":"04:43.330 ","End":"04:45.929","Text":"the arc, I can activate the concentric"},{"Start":"04:45.940 ","End":"04:48.290","Text":"constraint by clicking on it, then I’ll"},{"Start":"04:48.290 ","End":"04:50.750","Text":"click on the entities in either order."},{"Start":"04:51.190 ","End":"04:53.219","Text":"If I select the arc and then select the"},{"Start":"04:53.230 ","End":"04:55.489","Text":"circle you’ll see that now both entities"},{"Start":"04:55.490 ","End":"04:57.739","Text":"share the same centerpoint, which is"},{"Start":"04:57.740 ","End":"04:59.870","Text":"represented by the concentric glyph."},{"Start":"05:01.799 ","End":"05:03.399","Text":"I’ll hit the Escape key to exit"},{"Start":"05:03.400 ","End":"05:04.909","Text":"the concentric constraint, and I’ll"},{"Start":"05:05.650 ","End":"05:07.370","Text":"select the midpoint constraint."},{"Start":"05:08.150 ","End":"05:09.600","Text":"The midpoint constraint, which"},{"Start":"05:09.600 ","End":"05:11.340","Text":"is represented by a triangle,"},{"Start":"05:11.540 ","End":"05:12.910","Text":"will come up often as you are"},{"Start":"05:12.920 ","End":"05:14.870","Text":"drawing lines in Fusion 360."},{"Start":"05:15.780 ","End":"05:17.490","Text":"The midpoint constraint allows us"},{"Start":"05:17.490 ","End":"05:19.450","Text":"to force the endpoint of a line to"},{"Start":"05:19.450 ","End":"05:21.900","Text":"the center point of a line or arc."},{"Start":"05:22.609 ","End":"05:24.630","Text":"If I select the endpoint of this line"},{"Start":"05:24.710 ","End":"05:26.880","Text":"and then select the bottom line you’ll"},{"Start":"05:26.880 ","End":"05:29.330","Text":"see that it snaps to the midpoint and the"},{"Start":"05:29.360 ","End":"05:32.739","Text":"triangle, or midpoint glyph, now appears."},{"Start":"05:33.950 ","End":"05:35.210","Text":"The next constraint in the"},{"Start":"05:35.210 ","End":"05:37.620","Text":"sketch palette is fix/unfix."},{"Start":"05:38.469 ","End":"05:40.429","Text":"If I select it, and click on a line,"},{"Start":"05:40.440 ","End":"05:42.220","Text":"you’ll notice that it turns green."},{"Start":"05:42.490 ","End":"05:43.780","Text":"Notice while the position of"},{"Start":"05:43.780 ","End":"05:46.330","Text":"the line itself is fixed, the"},{"Start":"05:49.470 ","End":"05:50.900","Text":"endpoints can still be adjusted."},{"Start":"05:51.580 ","End":"05:53.460","Text":"Now personally, I wouldn’t recommend"},{"Start":"05:53.460 ","End":"05:56.500","Text":"using the fix/unfix very often, because"},{"Start":"05:56.500 ","End":"05:58.460","Text":"if the rest of your sketch is constrained"},{"Start":"05:58.520 ","End":"06:00.359","Text":"and dimensioned properly then you should"},{"Start":"06:00.369 ","End":"06:02.090","Text":"be able to update your sketch while"},{"Start":"06:02.090 ","End":"06:03.930","Text":"knowing what will happen to your sketch."},{"Start":"06:04.490 ","End":"06:06.870","Text":"The problem with fix/unfix is that"},{"Start":"06:06.870 ","End":"06:09.090","Text":"if you have a line or multiple lines"},{"Start":"06:09.090 ","End":"06:10.510","Text":"fixed in your sketch, then you won’t"},{"Start":"06:10.530 ","End":"06:12.390","Text":"always be able to update them without"},{"Start":"06:12.390 ","End":"06:14.809","Text":"going ahead and unfixing them first…"},{"Start":"06:15.330 ","End":"06:17.679","Text":"and sometimes this can get messy,"},{"Start":"06:17.759 ","End":"06:19.909","Text":"especially in larger sketches."},{"Start":"06:21.680 ","End":"06:23.539","Text":"The next constraint is the parallel"},{"Start":"06:23.540 ","End":"06:25.250","Text":"constraint, which makes any two"},{"Start":"06:25.250 ","End":"06:26.939","Text":"lines parallel to each other."},{"Start":"06:27.389 ","End":"06:29.249","Text":"I’ll click on the parallel constraint"},{"Start":"06:29.259 ","End":"06:31.550","Text":"to activate it and then I’ll select"},{"Start":"06:31.550 ","End":"06:33.870","Text":"these two lines… and you’ll notice that"},{"Start":"06:33.870 ","End":"06:35.829","Text":"now if I drag them around they will"},{"Start":"06:35.910 ","End":"06:40.860","Text":"always stay parallel to one another."},{"Start":"06:41.120 ","End":"06:42.680","Text":"The next constraint I’ll click on"},{"Start":"06:42.720 ","End":"06:44.450","Text":"is the perpendicular constraint."},{"Start":"06:45.010 ","End":"06:46.440","Text":"The perpendicular constraint"},{"Start":"06:46.469 ","End":"06:48.760","Text":"forces two lines to remain at a"},{"Start":"06:48.770 ","End":"06:51.159","Text":"90-degree angle to one another."},{"Start":"06:51.830 ","End":"06:53.560","Text":"An important thing to note is that the"},{"Start":"06:53.570 ","End":"06:55.830","Text":"perpendicular constraint does not have"},{"Start":"06:55.830 ","End":"06:57.850","Text":"to be used on lines that are touching."},{"Start":"06:58.350 ","End":"06:59.990","Text":"If I select the left vertical"},{"Start":"06:59.990 ","End":"07:01.810","Text":"line and then select the top"},{"Start":"07:01.810 ","End":"07:03.349","Text":"right line you’ll see that it made"},{"Start":"07:03.349 ","End":"07:05.060","Text":"them perpendicular to each other."},{"Start":"07:05.940 ","End":"07:07.740","Text":"You’ll also notice that because"},{"Start":"07:07.740 ","End":"07:09.149","Text":"these two lines were collinear"},{"Start":"07:09.170 ","End":"07:11.499","Text":"with each other, they are not both"},{"Start":"07:11.520 ","End":"07:13.590","Text":"perpendicular to the left line, even"},{"Start":"07:13.660 ","End":"07:16.070","Text":"though only one is directly constrained"},{"Start":"07:16.890 ","End":"07:18.870","Text":"as represented by the glyph here."},{"Start":"07:20.530 ","End":"07:22.340","Text":"So this is a perfect example of how"},{"Start":"07:22.340 ","End":"07:24.360","Text":"constraints can be used in conjunction"},{"Start":"07:24.360 ","End":"07:26.290","Text":"with one another to constrain sketch"},{"Start":"07:26.330 ","End":"07:28.549","Text":"entities in a more efficient manner."},{"Start":"07:29.959 ","End":"07:31.775","Text":"The next constraint I’ll activate is"},{"Start":"07:31.790 ","End":"07:34.390","Text":"the horizontal/vertical constraint,"},{"Start":"07:34.810 ","End":"07:36.760","Text":"which forces a line to snap to"},{"Start":"07:36.760 ","End":"07:38.710","Text":"either horizontal or vertical,"},{"Start":"07:39.050 ","End":"07:41.540","Text":"whichever orientation is the closest."},{"Start":"07:43.110 ","End":"07:44.680","Text":"If I click on this middle line"},{"Start":"07:44.690 ","End":"07:46.519","Text":"you’ll see that it snaps to vertical"},{"Start":"07:46.650 ","End":"07:48.349","Text":"and the glyph appears next to it."},{"Start":"07:49.219 ","End":"07:51.159","Text":"The horizontal/vertical constraint"},{"Start":"07:51.160 ","End":"07:53.010","Text":"can also be used to make points"},{"Start":"07:53.090 ","End":"07:54.510","Text":"line up with one another."},{"Start":"07:55.400 ","End":"07:57.539","Text":"If I select the centerpoint of the circle"},{"Start":"07:57.580 ","End":"07:59.900","Text":"and this endpoint of the line you’ll"},{"Start":"07:59.900 ","End":"08:02.310","Text":"see that they are now horizontal… and"},{"Start":"08:02.310 ","End":"08:04.059","Text":"because our arc and circle are concentric"},{"Start":"08:04.990 ","End":"08:07.400","Text":"the arc went ahead and moved with it."},{"Start":"08:10.020 ","End":"08:11.940","Text":"Next, I’ll activate the “tangent”"},{"Start":"08:11.960 ","End":"08:15.020","Text":"constraint, which creates tangency, or a"},{"Start":"08:15.030 ","End":"08:17.310","Text":"curve touching a line segment at a single"},{"Start":"08:17.310 ","End":"08:22.960","Text":"point with a relatively smooth transition."},{"Start":"08:23.730 ","End":"08:25.249","Text":"The tangent constraint will create"},{"Start":"08:25.250 ","End":"08:26.849","Text":"this smooth transition between a"},{"Start":"08:26.850 ","End":"08:29.070","Text":"line and a circular element for us."},{"Start":"08:30.270 ","End":"08:31.710","Text":"I’ll go ahead and add tangent"},{"Start":"08:31.750 ","End":"08:33.310","Text":"constraints to the arc and the"},{"Start":"08:33.310 ","End":"08:34.720","Text":"nearby lines by first selecting"},{"Start":"08:34.720 ","End":"08:37.390","Text":"the arc… and then the right line."},{"Start":"08:38.020 ","End":"08:39.699","Text":"Now I’ll do the other line by selecting"},{"Start":"08:39.700 ","End":"08:41.939","Text":"the arc again and then the left line,"},{"Start":"08:42.269 ","End":"08:43.960","Text":"and you’ll see that we now have both"},{"Start":"08:43.960 ","End":"08:46.390","Text":"of the lines tangent to the arc… as"},{"Start":"08:46.390 ","End":"08:48.520","Text":"represented by the tangent glyphs here."},{"Start":"08:50.770 ","End":"08:52.439","Text":"The next constraint I’ll activate"},{"Start":"08:52.439 ","End":"08:53.870","Text":"is the curvature constraint."},{"Start":"08:54.370 ","End":"08:56.149","Text":"The curvature constraint makes the"},{"Start":"08:56.150 ","End":"08:58.680","Text":"curvature at the transition point equal."},{"Start":"08:59.279 ","End":"09:00.909","Text":"Essentially, the curvature constraint"},{"Start":"09:01.189 ","End":"09:03.140","Text":"can help make organic shapes more"},{"Start":"09:03.140 ","End":"09:04.940","Text":"smooth, so you likely won’t be"},{"Start":"09:04.940 ","End":"09:06.740","Text":"using it very often compared to"},{"Start":"09:06.740 ","End":"09:08.200","Text":"some of these other constraints."},{"Start":"09:09.110 ","End":"09:10.770","Text":"To demo this constraint I’ll have to"},{"Start":"09:10.770 ","End":"09:13.010","Text":"draw a spline connecting to the arc."},{"Start":"09:13.590 ","End":"09:15.200","Text":"I’ll select spline from the sketch"},{"Start":"09:15.210 ","End":"09:17.490","Text":"dropdown menu and then I’ll draw a spline"},{"Start":"09:17.490 ","End":"09:19.500","Text":"from the edge of the arc to some of these"},{"Start":"09:19.520 ","End":"09:22.270","Text":"other points...and I’ll just drag some of"},{"Start":"09:22.490 ","End":"09:24.260","Text":"the handles here so it\u0027s not as straight."},{"Start":"09:25.590 ","End":"09:26.939","Text":"Then, to help you see what the"},{"Start":"09:26.940 ","End":"09:28.960","Text":"curvature constraint does I’ll select"},{"Start":"09:28.960 ","End":"09:31.150","Text":"the spline and the arc while holding"},{"Start":"09:31.150 ","End":"09:33.260","Text":"down the shift key and I’ll click the"},{"Start":"09:33.260 ","End":"09:35.639","Text":"curvature comb in the sketch palette."},{"Start":"09:37.270 ","End":"09:38.850","Text":"The curvature combs will help you"},{"Start":"09:38.850 ","End":"09:40.720","Text":"better understand the transition"},{"Start":"09:40.720 ","End":"09:42.800","Text":"point of the spline and the arc."},{"Start":"09:43.110 ","End":"09:44.600","Text":"If we look at where they meet you’ll"},{"Start":"09:44.600 ","End":"09:46.480","Text":"see that the curvature comb is not"},{"Start":"09:46.490 ","End":"09:49.390","Text":"continuous because the transition is not"},{"Start":"09:49.400 ","End":"09:51.790","Text":"smooth and flips to the other side here."},{"Start":"09:52.840 ","End":"09:54.440","Text":"If I select the curvature constraint"},{"Start":"09:54.600 ","End":"09:56.650","Text":"and select both sketch entities"},{"Start":"09:56.750 ","End":"09:57.980","Text":"you’ll see that the comb will"},{"Start":"09:57.980 ","End":"10:00.020","Text":"change to have a fluid or smooth"},{"Start":"10:00.030 ","End":"10:02.430","Text":"transition from the arc to the spline."},{"Start":"10:04.300 ","End":"10:05.840","Text":"Now let’s get rid of this curvature"},{"Start":"10:05.880 ","End":"10:07.860","Text":"comb by hitting the escape key to make"},{"Start":"10:07.860 ","End":"10:09.639","Text":"sure we’re not in another command,"},{"Start":"10:10.199 ","End":"10:13.189","Text":"then I’ll select the arc and spline and"},{"Start":"10:13.190 ","End":"10:15.199","Text":"I’ll select the curvature comb icon to"},{"Start":"10:15.200 ","End":"10:17.500","Text":"turn it off… and I’ll hit the escape"},{"Start":"10:17.500 ","End":"10:19.810","Text":"key once again to clear all commands."},{"Start":"10:21.590 ","End":"10:23.360","Text":"The next constraint I’ll activate is"},{"Start":"10:23.360 ","End":"10:25.199","Text":"the equal constraint, which forces"},{"Start":"10:25.240 ","End":"10:27.560","Text":"two entities to be equal in size."},{"Start":"10:28.080 ","End":"10:29.930","Text":"I can select the two horizontal"},{"Start":"10:29.930 ","End":"10:32.060","Text":"lines at the top and you’ll see that"},{"Start":"10:32.060 ","End":"10:34.079","Text":"it forces them to be the same size."},{"Start":"10:34.660 ","End":"10:36.680","Text":"If I hit the escape key and drag"},{"Start":"10:36.680 ","End":"10:38.770","Text":"this right point around you’ll see"},{"Start":"10:38.770 ","End":"10:40.259","Text":"that not only do these two lines"},{"Start":"10:40.270 ","End":"10:42.649","Text":"stay equal in size, but they also"},{"Start":"10:42.649 ","End":"10:44.429","Text":"follow all of the other constraints"},{"Start":"10:44.429 ","End":"10:45.729","Text":"that we have applied to them."},{"Start":"10:47.119 ","End":"10:48.910","Text":"The last constraint I’ll activate"},{"Start":"10:48.960 ","End":"10:50.480","Text":"is the symmetry constraint."},{"Start":"10:50.870 ","End":"10:52.380","Text":"The most important thing to note"},{"Start":"10:52.390 ","End":"10:53.870","Text":"with the symmetry constraint is"},{"Start":"10:53.870 ","End":"10:56.220","Text":"that it requires 3 mouse clicks."},{"Start":"10:57.110 ","End":"10:58.775","Text":"The first two clicks will be the entities"},{"Start":"10:59.070 ","End":"11:01.076","Text":"that you want to be symmetric and the"},{"Start":"11:01.299 ","End":"11:03.579","Text":"3rd selection will be the entity or"},{"Start":"11:03.580 ","End":"11:06.339","Text":"line they will be symmetric about."},{"Start":"11:07.740 ","End":"11:10.260","Text":"I’ll click on this top line and"},{"Start":"11:12.120 ","End":"11:12.268","Text":"then this line for the lines to be"},{"Start":"11:12.268 ","End":"11:13.190","Text":"symmetric, and I’ll click this line in"},{"Start":"11:13.190 ","End":"11:15.370","Text":"the middle for the line of symmetry."},{"Start":"11:16.290 ","End":"11:18.479","Text":"Now you’ll see if I hit the escape key"},{"Start":"11:18.730 ","End":"11:21.320","Text":"and drag this top-line around, both lines"},{"Start":"11:21.320 ","End":"11:23.679","Text":"will stay symmetric from this middle line."},{"Start":"11:25.039 ","End":"11:26.930","Text":"Now before I end this video I’ll"},{"Start":"11:26.930 ","End":"11:28.810","Text":"show you a few other quick tips..."},{"Start":"11:29.340 ","End":"11:31.050","Text":"If you right-click on any sketch"},{"Start":"11:31.050 ","End":"11:33.469","Text":"entity you’ll see that it shows all"},{"Start":"11:33.469 ","End":"11:35.310","Text":"of the available or relevant sketch"},{"Start":"11:35.310 ","End":"11:37.070","Text":"constraints in the marking menu."},{"Start":"11:38.340 ","End":"11:41.539","Text":"If you select multiple sketch entities"},{"Start":"11:41.539 ","End":"11:43.010","Text":"while holding down the shift key"},{"Start":"11:43.540 ","End":"11:46.250","Text":"and then right-click you’ll see"},{"Start":"11:46.250 ","End":"11:48.050","Text":"that the entities that you selected"},{"Start":"11:48.250 ","End":"11:50.040","Text":"WILL affect which constraints are"},{"Start":"11:50.050 ","End":"11:51.689","Text":"available in the marking menu."},{"Start":"11:56.579 ","End":"11:57.360","Text":"Another thing you’ll notice is that"},{"Start":"11:57.360 ","End":"11:59.079","Text":"some constraints will automatically be"},{"Start":"11:59.080 ","End":"12:01.270","Text":"applied while you sketch out entities."},{"Start":"12:02.220 ","End":"12:04.079","Text":"For example, If I hit the keyboard"},{"Start":"12:04.080 ","End":"12:05.890","Text":"letter “L” for line and draw a"},{"Start":"12:05.940 ","End":"12:07.739","Text":"line out here...you’ll see that it"},{"Start":"12:07.740 ","End":"12:09.819","Text":"will automatically add a horizontal"},{"Start":"12:09.820 ","End":"12:12.380","Text":"constraint if I let it snap to the grid."}],"ID":28999},{"Watched":false,"Name":"Day 17 - How and Why to Fully Constrain Sketches","Duration":"14m 26s","ChapterTopicVideoID":28238,"CourseChapterTopicPlaylistID":275347,"HasSubtitles":true,"ThumbnailPath":null,"UploadDate":null,"DurationForVideoObject":null,"Description":null,"MetaTitle":null,"MetaDescription":null,"Canonical":null,"VideoComments":[],"Subtitles":[{"Start":"00:00.080 ","End":"00:01.000","Text":"Kevin Kennedy: Hey there, It’s"},{"Start":"00:01.000 ","End":"00:03.070","Text":"Kevin Kennedy, and welcome to Day"},{"Start":"00:03.070 ","End":"00:06.810","Text":"#17 of Learn Fusion 360 in 30 days."},{"Start":"00:07.390 ","End":"00:09.410","Text":"By the end of this tutorial, you’ll"},{"Start":"00:09.410 ","End":"00:11.389","Text":"have a solid understanding of how"},{"Start":"00:11.389 ","End":"00:13.969","Text":"to use dimensions AND constraints"},{"Start":"00:13.979 ","End":"00:16.169","Text":"to fully constrain your sketches."},{"Start":"00:16.940 ","End":"00:19.240","Text":"You’ll learn a few dimension tricks, and"},{"Start":"00:19.240 ","End":"00:21.909","Text":"I’ll explain and demo WHY it’s important"},{"Start":"00:21.920 ","End":"00:23.610","Text":"to fully constrain your sketches."},{"Start":"00:24.270 ","End":"00:26.540","Text":"Let me start off by stating that Fusion"},{"Start":"00:26.540 ","End":"00:29.730","Text":"360 does not require sketches to be fully"},{"Start":"00:29.730 ","End":"00:32.140","Text":"constrained, but it’s a good practice"},{"Start":"00:32.140 ","End":"00:34.279","Text":"to always fully constrain your sketches,"},{"Start":"00:34.639 ","End":"00:37.389","Text":"which we’ll cover in just a minute...but"},{"Start":"00:37.400 ","End":"00:39.269","Text":"first, It’s important to note that"},{"Start":"00:39.270 ","End":"00:41.470","Text":"the way you define or constrain your"},{"Start":"00:41.470 ","End":"00:44.720","Text":"sketches will differ per each design."},{"Start":"00:46.929 ","End":"00:48.490","Text":"This is why it’s important that"},{"Start":"00:48.490 ","End":"00:50.560","Text":"you come up with a strategy for how"},{"Start":"00:50.570 ","End":"00:52.819","Text":"the entities relate to one another,"},{"Start":"00:53.039 ","End":"00:55.220","Text":"at the beginning of each model."},{"Start":"00:55.890 ","End":"00:57.889","Text":"This strategy is often referred"},{"Start":"00:57.890 ","End":"01:00.500","Text":"to as the sketch’s design intent."},{"Start":"01:01.440 ","End":"01:03.650","Text":"Personally, I recommend sketching"},{"Start":"01:03.650 ","End":"01:05.300","Text":"out your design on pencil and"},{"Start":"01:05.300 ","End":"01:07.210","Text":"paper before you start sketching"},{"Start":"01:07.280 ","End":"01:09.250","Text":"anything out in Fusion 360."},{"Start":"01:10.330 ","End":"01:12.369","Text":"Doing so will help you to think about how"},{"Start":"01:12.390 ","End":"01:14.660","Text":"the sketch should be constrained before"},{"Start":"01:14.660 ","End":"01:16.610","Text":"you get too caught up in the computer."},{"Start":"01:18.120 ","End":"01:19.940","Text":"Now for this demo, I want to draw"},{"Start":"01:19.940 ","End":"01:21.779","Text":"this square washer plate, which"},{"Start":"01:21.780 ","End":"01:23.700","Text":"is essentially a square with"},{"Start":"01:23.700 ","End":"01:25.440","Text":"a hole cut out of the middle."},{"Start":"01:27.400 ","End":"01:29.480","Text":"While looking at this sketch I can ask"},{"Start":"01:29.480 ","End":"01:32.050","Text":"myself, what do I know about this object"},{"Start":"01:32.530 ","End":"01:34.570","Text":"without knowing any of the dimensions?"},{"Start":"01:34.580 ","End":"01:34.610","Text":"Well."},{"Start":"01:35.990 ","End":"01:38.210","Text":"I see that all four sides appear"},{"Start":"01:38.210 ","End":"01:41.150","Text":"to be equal…I see that the lines"},{"Start":"01:41.200 ","End":"01:43.250","Text":"are perpendicular at the corners..."},{"Start":"01:44.080 ","End":"01:45.700","Text":"and the lines opposite of each"},{"Start":"01:45.700 ","End":"01:47.579","Text":"other appear to be parallel…."},{"Start":"01:48.449 ","End":"01:50.260","Text":"and it appears that the center of"},{"Start":"01:50.260 ","End":"01:52.440","Text":"this circle is located directly"},{"Start":"01:52.440 ","End":"01:54.089","Text":"in the middle of the washer plate."},{"Start":"01:57.610 ","End":"01:59.350","Text":"So let’s start off by creating a"},{"Start":"01:59.350 ","End":"02:01.140","Text":"new component from the assemble"},{"Start":"02:01.140 ","End":"02:03.110","Text":"dropdown list, and I’ll title it"},{"Start":"02:03.139 ","End":"02:05.390","Text":"“square washer” and click okay."},{"Start":"02:06.480 ","End":"02:08.190","Text":"Now let’s create the sketch for this"},{"Start":"02:08.199 ","End":"02:10.080","Text":"washer plate so we can walk through the"},{"Start":"02:10.090 ","End":"02:12.550","Text":"steps of constraining and dimensioning it."},{"Start":"02:13.650 ","End":"02:15.000","Text":"I’ll hit the keyboard shortcut"},{"Start":"02:15.000 ","End":"02:17.220","Text":"letter “R” for rectangle and"},{"Start":"02:17.220 ","End":"02:18.750","Text":"I’ll select the top plane."},{"Start":"02:19.929 ","End":"02:21.740","Text":"Now before we click on anything..."},{"Start":"02:21.820 ","End":"02:23.539","Text":"if you look in the sketch palette"},{"Start":"02:23.570 ","End":"02:24.899","Text":"you’ll see that we can switch from"},{"Start":"02:24.900 ","End":"02:27.940","Text":"a 2-point rectangle to a 3-point"},{"Start":"02:27.950 ","End":"02:30.549","Text":"rectangle or a center rectangle."},{"Start":"02:32.080 ","End":"02:33.709","Text":"For this washer plate, we’ll want to"},{"Start":"02:33.709 ","End":"02:35.630","Text":"select the center rectangle, because"},{"Start":"02:35.639 ","End":"02:37.420","Text":"the center rectangle will already"},{"Start":"02:37.420 ","End":"02:39.700","Text":"have a nice center point for us to"},{"Start":"02:39.700 ","End":"02:41.469","Text":"reference for the circle cutout."},{"Start":"02:41.469 ","End":"02:45.460","Text":"This is why as you continue to learn"},{"Start":"02:45.460 ","End":"02:47.630","Text":"Fusion 360 it’s important that you"},{"Start":"02:47.630 ","End":"02:49.390","Text":"understand what all of the sketch"},{"Start":"02:49.390 ","End":"02:51.900","Text":"tools do… the more you know you’ll"},{"Start":"02:51.900 ","End":"02:53.500","Text":"become more efficient and it will"},{"Start":"02:53.500 ","End":"02:56.089","Text":"help eliminate unnecessary steps."},{"Start":"02:57.940 ","End":"02:59.839","Text":"So I’ll the select center rectangle"},{"Start":"02:59.840 ","End":"03:01.510","Text":"icon and I’m just going to click"},{"Start":"03:01.550 ","End":"03:03.680","Text":"away from the origin, out in space"},{"Start":"03:03.680 ","End":"03:05.890","Text":"here, and I’ll drag out with my"},{"Start":"03:05.890 ","End":"03:08.350","Text":"mouse and click at a random distance."},{"Start":"03:09.490 ","End":"03:11.130","Text":"And just so you can see the difference"},{"Start":"03:11.179 ","End":"03:13.450","Text":"I’m going to select a 2-point rectangle"},{"Start":"03:13.500 ","End":"03:15.260","Text":"and draw that out right next to our"},{"Start":"03:15.260 ","End":"03:17.290","Text":"center rectangle… and I’ll hit the"},{"Start":"03:17.290 ","End":"03:19.609","Text":"escape key to clear all commands."},{"Start":"03:22.020 ","End":"03:23.310","Text":"Now let’s look at both of"},{"Start":"03:23.310 ","End":"03:25.239","Text":"these rectangles… so you’ll"},{"Start":"03:25.240 ","End":"03:26.910","Text":"notice a few things here."},{"Start":"03:27.559 ","End":"03:30.299","Text":"As I mentioned in Day #16, you’ll see"},{"Start":"03:30.300 ","End":"03:32.420","Text":"that Fusion 360 will automatically"},{"Start":"03:32.420 ","End":"03:34.509","Text":"apply some constraints when using"},{"Start":"03:34.510 ","End":"03:36.600","Text":"these predefined sketch entities."},{"Start":"03:38.430 ","End":"03:40.370","Text":"Using the 2-point rectangle tool"},{"Start":"03:40.400 ","End":"03:42.380","Text":"applied vertical and horizontal"},{"Start":"03:42.590 ","End":"03:44.740","Text":"constraints to all 4 lines."},{"Start":"03:46.920 ","End":"03:48.499","Text":"Now here’s a tip for you..."},{"Start":"03:48.679 ","End":"03:51.199","Text":"if a constraint is automatically applied"},{"Start":"03:51.219 ","End":"03:53.609","Text":"and you can’t remember what it stands"},{"Start":"03:53.609 ","End":"03:56.790","Text":"for, then click on the glyph or icon"},{"Start":"03:57.170 ","End":"03:58.739","Text":"and you’ll see in the lower-right-hand"},{"Start":"03:58.740 ","End":"04:01.090","Text":"corner it states the type of constraint."},{"Start":"04:02.290 ","End":"04:04.900","Text":"You’ll see this one says horizontal...and"},{"Start":"04:04.900 ","End":"04:07.020","Text":"If I click on this one for the right line"},{"Start":"04:07.240 ","End":"04:09.389","Text":"it states that it’s a vertical constraint."},{"Start":"04:11.969 ","End":"04:13.940","Text":"Now looking at the center rectangle we"},{"Start":"04:13.940 ","End":"04:15.980","Text":"created you’ll see that it automatically"},{"Start":"04:15.980 ","End":"04:18.110","Text":"created some different constraints for us."},{"Start":"04:18.630 ","End":"04:21.010","Text":"It created some parallel constraints,"},{"Start":"04:21.860 ","End":"04:23.930","Text":"a coincident constraint where the"},{"Start":"04:23.930 ","End":"04:26.430","Text":"lines meet in the middle and a"},{"Start":"04:26.440 ","End":"04:28.490","Text":"perpendicular constraint in the corner."},{"Start":"04:30.639 ","End":"04:32.180","Text":"Now that you see the difference"},{"Start":"04:32.180 ","End":"04:34.480","Text":"here… I’m going to delete the 2-point"},{"Start":"04:34.490 ","End":"04:38.489","Text":"rectangle by selecting over it and"},{"Start":"04:38.489 ","End":"04:40.830","Text":"hitting the delete key on my keyboard."},{"Start":"04:42.799 ","End":"04:52.430","Text":"Now we want to fully constrain or define"},{"Start":"04:52.430 ","End":"04:55.200","Text":"this center-rectangle before we turn it"},{"Start":"04:55.230 ","End":"04:58.320","Text":"into a 3-dimensional object… that way we"},{"Start":"04:58.320 ","End":"05:00.849","Text":"have 100% control of the sketch if we go"},{"Start":"05:00.849 ","End":"05:03.119","Text":"to update the size of the sketch or change"},{"Start":"05:03.160 ","End":"05:05.159","Text":"anything with the square washer plate."},{"Start":"05:07.789 ","End":"05:09.320","Text":"So in its current state, you’ll"},{"Start":"05:09.320 ","End":"05:10.460","Text":"notice that the lines of the"},{"Start":"05:10.460 ","End":"05:12.830","Text":"rectangle are blue, which means"},{"Start":"05:12.830 ","End":"05:14.520","Text":"that they are not fully constrained"},{"Start":"05:15.050 ","End":"05:16.900","Text":"and we can still move them around."},{"Start":"05:18.840 ","End":"05:20.879","Text":"If I click and drag on these lines"},{"Start":"05:20.929 ","End":"05:22.610","Text":"you’ll see that I can move them up"},{"Start":"05:22.809 ","End":"05:27.360","Text":"and down...side to side… or I can grab"},{"Start":"05:27.430 ","End":"05:29.730","Text":"points and change the overall size."},{"Start":"05:34.090 ","End":"05:36.019","Text":"So our goal here is to figure out"},{"Start":"05:36.040 ","End":"05:38.299","Text":"how to turn all of these lines from"},{"Start":"05:38.299 ","End":"05:41.199","Text":"blue to black, because black sketch"},{"Start":"05:41.230 ","End":"05:43.130","Text":"entities signify that they are fully"},{"Start":"05:43.130 ","End":"05:45.780","Text":"constrained and can’t be moved unless"},{"Start":"05:45.780 ","End":"05:48.710","Text":"we update the dimension or constraint"},{"Start":"05:48.760 ","End":"05:50.440","Text":"that is “driving” the sketch."},{"Start":"05:51.400 ","End":"05:53.130","Text":"Again, doing this will give us"},{"Start":"05:53.139 ","End":"05:54.890","Text":"full control of the sketch, so if"},{"Start":"05:54.890 ","End":"05:56.680","Text":"we update the size, we keep the"},{"Start":"05:56.680 ","End":"05:58.099","Text":"shape that we originally wanted."},{"Start":"06:00.039 ","End":"06:02.040","Text":"Now the rule of thumb is to always"},{"Start":"06:02.040 ","End":"06:04.300","Text":"use constraints first, and then"},{"Start":"06:04.300 ","End":"06:06.810","Text":"dimension your sketches second...and"},{"Start":"06:06.810 ","End":"06:08.630","Text":"there are a few reasons for this."},{"Start":"06:09.660 ","End":"06:11.970","Text":"First, the fewer amount of dimensions"},{"Start":"06:11.970 ","End":"06:14.469","Text":"we have, the easier it will be to update"},{"Start":"06:14.469 ","End":"06:16.839","Text":"the size of our model, should we need to."},{"Start":"06:17.859 ","End":"06:20.090","Text":"Second, the fewer dimensions we use, the"},{"Start":"06:20.090 ","End":"06:22.880","Text":"fewer amount of problems we’ll run into…"},{"Start":"06:23.250 ","End":"06:25.539","Text":"such as accidentally over-defining our"},{"Start":"06:25.540 ","End":"06:28.270","Text":"sketch, which means the dimension cannot"},{"Start":"06:28.270 ","End":"06:30.470","Text":"be altered because it’s already driven"},{"Start":"06:30.470 ","End":"06:33.889","Text":"by other dimensions and/or constraints."},{"Start":"06:36.109 ","End":"06:38.369","Text":"So if we look back at our original"},{"Start":"06:38.370 ","End":"06:39.820","Text":"sketch notes we’ll see that it"},{"Start":"06:39.820 ","End":"06:42.200","Text":"appears that all 4 sides are equal."},{"Start":"06:43.100 ","End":"06:45.260","Text":"Therefore, using the equal sketch"},{"Start":"06:45.270 ","End":"06:47.499","Text":"constraint we can force all four lines"},{"Start":"06:47.500 ","End":"06:51.759","Text":"of our rectangle to always be equal….So"},{"Start":"06:51.780 ","End":"06:53.869","Text":"holding down the shift key I’m going to"},{"Start":"06:53.869 ","End":"06:57.120","Text":"select the left line and the top line of"},{"Start":"06:57.120 ","End":"07:00.160","Text":"the square… and I’m going to click on the"},{"Start":"07:00.200 ","End":"07:02.470","Text":"equal constraint in the sketch palette."},{"Start":"07:04.160 ","End":"07:06.340","Text":"Now the reason I only applied the equal"},{"Start":"07:06.340 ","End":"07:09.210","Text":"constraint to left and top line is that"},{"Start":"07:09.220 ","End":"07:11.330","Text":"they already have parallel constraints."},{"Start":"07:12.109 ","End":"07:14.170","Text":"If I reactivate the equal constraint"},{"Start":"07:14.190 ","End":"07:16.290","Text":"and select the other two lines you’ll"},{"Start":"07:16.290 ","End":"07:18.120","Text":"see that it won’t let us add the equal"},{"Start":"07:18.130 ","End":"07:20.380","Text":"constraint to all 4 lines because"},{"Start":"07:20.380 ","End":"07:22.460","Text":"it would overconstrain the geometry,"},{"Start":"07:22.809 ","End":"07:25.159","Text":"making those constraints unnecessary."},{"Start":"07:27.420 ","End":"07:29.019","Text":"Now you’ll notice that the lines"},{"Start":"07:29.020 ","End":"07:31.080","Text":"of our rectangle still aren\u0027t fully"},{"Start":"07:31.090 ","End":"07:32.909","Text":"constrained because they’re still blue."},{"Start":"07:33.720 ","End":"07:35.430","Text":"So if you’re ever wondering why"},{"Start":"07:35.440 ","End":"07:36.670","Text":"they aren\u0027t fully constrained"},{"Start":"07:36.700 ","End":"07:38.700","Text":"you can simply click on any lines"},{"Start":"07:38.849 ","End":"07:41.219","Text":"OR points, and drag them around."},{"Start":"07:42.160 ","End":"07:43.609","Text":"If I click and hold on the"},{"Start":"07:43.609 ","End":"07:45.500","Text":"centerpoint of the rectangle you’ll"},{"Start":"07:45.500 ","End":"07:47.159","Text":"see that I can drag it around."},{"Start":"07:48.400 ","End":"07:49.810","Text":"We can use the coincident"},{"Start":"07:49.810 ","End":"07:51.390","Text":"constraint to snap the center of"},{"Start":"07:51.390 ","End":"07:53.710","Text":"the rectangle to the center origin."},{"Start":"07:54.330 ","End":"07:55.739","Text":"I’ll activate the coincident"},{"Start":"07:55.740 ","End":"07:56.690","Text":"constraint, click the origin point,"},{"Start":"07:56.690 ","End":"07:57.325","Text":"and then I’ll click the middle of"},{"Start":"07:57.325 ","End":"07:57.367","Text":"the rectangle...and you’ll notice the"},{"Start":"07:57.367 ","End":"07:58.570","Text":"rectangle will snap to the center origin."},{"Start":"08:06.550 ","End":"08:09.190","Text":"You also notice the center construction"},{"Start":"08:09.190 ","End":"08:11.320","Text":"lines and center point of the rectangle"},{"Start":"08:11.370 ","End":"08:14.120","Text":"are now black, or fully constrained."},{"Start":"08:16.469 ","End":"08:19.750","Text":"If I click and drag I can no longer"},{"Start":"08:19.750 ","End":"08:22.120","Text":"move the rectangle around, but we"},{"Start":"08:22.120 ","End":"08:23.919","Text":"can still change the size of the"},{"Start":"08:23.920 ","End":"08:26.090","Text":"rectangle by dragging the blue lines"},{"Start":"08:26.100 ","End":"08:27.930","Text":"which aren’t fully defined yet."},{"Start":"08:29.600 ","End":"08:31.470","Text":"Now one thing to note, I normally"},{"Start":"08:31.470 ","End":"08:33.099","Text":"would’ve started the center rectangle"},{"Start":"08:33.099 ","End":"08:35.420","Text":"sketch off the origin point, but"},{"Start":"08:35.420 ","End":"08:37.040","Text":"for this demo, I wanted to show"},{"Start":"08:37.040 ","End":"08:38.860","Text":"you want happens when you don’t."},{"Start":"08:38.870 ","End":"08:42.919","Text":"So I would always recommend"},{"Start":"08:42.919 ","End":"08:44.670","Text":"starting your first sketch of each"},{"Start":"08:44.680 ","End":"08:47.720","Text":"file at the center origin unless"},{"Start":"08:47.720 ","End":"08:49.370","Text":"you have a good reason not to."},{"Start":"08:51.510 ","End":"08:53.379","Text":"Now let\u0027s go ahead and fully constrain"},{"Start":"08:53.380 ","End":"08:55.250","Text":"the lines that are still blue."},{"Start":"08:55.509 ","End":"08:57.140","Text":"To do this we’ll have to add a"},{"Start":"08:57.140 ","End":"08:59.120","Text":"dimension to one of the sides..."},{"Start":"08:59.529 ","End":"09:01.030","Text":"So I’ll hit the letter “D” on the"},{"Start":"09:01.030 ","End":"09:03.680","Text":"keyboard for dimension...and if I click"},{"Start":"09:03.680 ","End":"09:06.280","Text":"on the top line, drag up with my mouse,"},{"Start":"09:06.360 ","End":"09:09.910","Text":"and type in 100mm and click enter…"},{"Start":"09:10.580 ","End":"09:13.630","Text":"you’ll see that now our sketch is 100%"},{"Start":"09:13.700 ","End":"09:16.290","Text":"black or fully constrained...and I"},{"Start":"09:16.309 ","End":"09:19.200","Text":"can\u0027t change the size or move any of"},{"Start":"09:19.209 ","End":"09:21.300","Text":"these lines by dragging them around."},{"Start":"09:23.780 ","End":"09:26.170","Text":"The ONLY way I can change the size is by"},{"Start":"09:26.179 ","End":"09:29.150","Text":"changing this one dimension we just added…"},{"Start":"09:31.400 ","End":"09:32.990","Text":"Now let’s go ahead and add our"},{"Start":"09:32.990 ","End":"09:34.699","Text":"circle cutout in the middle."},{"Start":"09:34.910 ","End":"09:36.910","Text":"I’ll activate the center-circle sketch"},{"Start":"09:36.920 ","End":"09:39.099","Text":"tool with the keyboard shortcut letter"},{"Start":"09:39.100 ","End":"09:41.830","Text":"“C.” Now we’ll click on the center"},{"Start":"09:41.830 ","End":"09:45.110","Text":"origin point, type in 50mm for the"},{"Start":"09:45.110 ","End":"09:47.909","Text":"dimension, and click with the mouse"},{"Start":"09:47.910 ","End":"09:50.220","Text":"again to snap the circle in place."},{"Start":"09:51.740 ","End":"09:53.979","Text":"Now you’ll see that our circle is also"},{"Start":"09:53.980 ","End":"09:56.340","Text":"represented as fully constrained with"},{"Start":"09:56.360 ","End":"09:58.680","Text":"black lines, because the dimension we"},{"Start":"09:58.680 ","End":"10:00.930","Text":"added and the fact that we drew it on"},{"Start":"10:00.930 ","End":"10:03.439","Text":"the center point, which automatically"},{"Start":"10:03.469 ","End":"10:05.510","Text":"added a coincident constraint."},{"Start":"10:08.040 ","End":"10:09.699","Text":"To delete a constraint that is"},{"Start":"10:09.759 ","End":"10:12.010","Text":"automatically applied all you have to do"},{"Start":"10:12.029 ","End":"10:14.479","Text":"is click on it and hit the delete key."},{"Start":"10:15.620 ","End":"10:16.835","Text":"If I click on the middle of the"},{"Start":"10:16.890 ","End":"10:18.270","Text":"circle you’ll see that there are 4"},{"Start":"10:18.680 ","End":"10:20.340","Text":"different coincident constraints."},{"Start":"10:22.320 ","End":"10:24.390","Text":"If I hover over the glyph of each"},{"Start":"10:24.390 ","End":"10:26.659","Text":"one you’ll be able to see what it"},{"Start":"10:26.660 ","End":"10:28.847","Text":"relates to… so it appears that the"},{"Start":"10:28.847 ","End":"10:28.947","Text":"3rd glyph here is the for the circle."},{"Start":"10:28.959 ","End":"10:31.990","Text":"I’ll select that and hit the delete"},{"Start":"10:31.990 ","End":"10:34.900","Text":"key… and now you\u0027ll see that the circle"},{"Start":"10:34.910 ","End":"10:37.060","Text":"is blue because I can move it around."},{"Start":"10:38.300 ","End":"10:40.579","Text":"So I’ll re-apply a coincident"},{"Start":"10:40.580 ","End":"10:41.970","Text":"constraint by activating"},{"Start":"10:42.009 ","End":"10:43.949","Text":"coincident in the sketch palette..."},{"Start":"10:45.069 ","End":"10:46.700","Text":"clicking the center origin..."},{"Start":"10:49.620 ","End":"10:49.935","Text":"and then the center point of the circle."},{"Start":"10:49.935 ","End":"10:51.800","Text":"Now let’s go ahead and extrude our"},{"Start":"10:51.800 ","End":"10:54.330","Text":"square washer up by hitting the keyboard"},{"Start":"10:54.330 ","End":"10:56.310","Text":"shortcut letter “E” for extrude."},{"Start":"10:57.220 ","End":"10:58.920","Text":"I’ll select the sketch and type"},{"Start":"10:58.920 ","End":"11:00.940","Text":"in 5mm for the thickness..."},{"Start":"11:01.679 ","End":"11:02.660","Text":"and click okay."},{"Start":"11:05.930 ","End":"11:07.310","Text":"At this point… I want to show"},{"Start":"11:07.310 ","End":"11:08.829","Text":"you a few dimension tips."},{"Start":"11:09.490 ","End":"11:11.110","Text":"I’ll double-click on the sketch in"},{"Start":"11:11.110 ","End":"11:14.140","Text":"the timeline to re-open it...and if I"},{"Start":"11:14.160 ","End":"11:16.670","Text":"hover over the dimensions you’ll notice"},{"Start":"11:16.670 ","End":"11:18.440","Text":"that it gives the dimension number."},{"Start":"11:19.790 ","End":"11:24.780","Text":"So we have D1: 100mm, where the number"},{"Start":"11:24.830 ","End":"11:27.190","Text":"one represents the dimension number."},{"Start":"11:27.780 ","End":"11:29.640","Text":"So if we hover over the circle"},{"Start":"11:29.640 ","End":"11:31.270","Text":"dimension you’ll see that the"},{"Start":"11:31.270 ","End":"11:34.310","Text":"dimension number is #2...and these"},{"Start":"11:34.310 ","End":"11:35.929","Text":"numbers are created based on the"},{"Start":"11:35.929 ","End":"11:38.260","Text":"order in which you dimension entities."},{"Start":"11:40.400 ","End":"11:42.490","Text":"Now one cool thing about dimensions is"},{"Start":"11:42.490 ","End":"11:45.190","Text":"that we can use functions in the dimension"},{"Start":"11:45.190 ","End":"11:47.450","Text":"field to make them a bit more robust."},{"Start":"11:48.520 ","End":"11:50.540","Text":"So if I knew that I always wanted"},{"Start":"11:50.540 ","End":"11:52.290","Text":"this inner circle cut out to be"},{"Start":"11:52.300 ","End":"11:55.079","Text":"half the size of my overall square"},{"Start":"11:55.480 ","End":"11:57.769","Text":"I could apply a function to always"},{"Start":"11:57.770 ","End":"11:59.619","Text":"be half of the square’s dimension."},{"Start":"12:01.970 ","End":"12:03.720","Text":"To do this, I’ll click on the circle"},{"Start":"12:03.720 ","End":"12:13.070","Text":"dimension and I’ll type out d1 forward"},{"Start":"12:13.070 ","End":"12:14.890","Text":"slash to represent that I want to"},{"Start":"12:14.890 ","End":"12:18.956","Text":"divide and then 2 because I want it"},{"Start":"12:19.070 ","End":"12:22.800","Text":"to always be half of the rectangle."},{"Start":"12:24.240 ","End":"12:26.100","Text":"Now if I click enter you’ll see"},{"Start":"12:26.100 ","End":"12:28.740","Text":"it says “FX for function and"},{"Start":"12:28.740 ","End":"12:30.430","Text":"it shows the diameter of 50mm."},{"Start":"12:32.570 ","End":"12:34.399","Text":"Now if I were to update the original"},{"Start":"12:34.400 ","End":"12:37.900","Text":"dimension to 150mm you’ll see that the"},{"Start":"12:37.900 ","End":"12:40.790","Text":"circle dimension updates as well...so now"},{"Start":"12:40.790 ","End":"12:44.360","Text":"it’s automatically been changed to 75mm."},{"Start":"12:46.110 ","End":"12:48.740","Text":"So again, this is why it’s"},{"Start":"12:48.740 ","End":"12:50.339","Text":"important to think through your"},{"Start":"12:50.340 ","End":"12:52.410","Text":"designs before you start sketching"},{"Start":"12:52.480 ","End":"12:54.089","Text":"anything out on the computer."},{"Start":"12:55.180 ","End":"12:57.060","Text":"I’ll also point out that you have to"},{"Start":"12:57.060 ","End":"12:59.360","Text":"use functions like this with caution."},{"Start":"12:59.920 ","End":"13:01.750","Text":"You don’t necessarily want to reference"},{"Start":"13:01.750 ","End":"13:04.400","Text":"dimensions all the time, especially"},{"Start":"13:04.400 ","End":"13:07.029","Text":"in larger models or sketches, as it"},{"Start":"13:07.030 ","End":"13:08.939","Text":"can get quite hard to remember what"},{"Start":"13:08.950 ","End":"13:12.070","Text":"each function or dimension represents."},{"Start":"13:12.080 ","End":"13:16.530","Text":"Now to summarize what we did here… we"},{"Start":"13:16.560 ","End":"13:18.940","Text":"added constraints first so we only had"},{"Start":"13:18.950 ","End":"13:21.430","Text":"two add two dimensions to fully define"},{"Start":"13:21.460 ","End":"13:24.429","Text":"and constrain our sketch, which allows"},{"Start":"13:24.429 ","End":"13:26.699","Text":"us to easily go back and simply change"},{"Start":"13:26.710 ","End":"13:29.449","Text":"one dimension if we decide our square"},{"Start":"13:29.449 ","End":"13:31.880","Text":"washer needs to be smaller or larger."},{"Start":"13:34.220 ","End":"13:35.599","Text":"If we take a look at this other"},{"Start":"13:35.600 ","End":"13:37.730","Text":"file...I’ve gone ahead and created the"},{"Start":"13:37.730 ","End":"13:39.930","Text":"same washer but I didn’t follow these"},{"Start":"13:39.960 ","End":"13:42.520","Text":"best practices and you’ll notice if I"},{"Start":"13:42.530 ","End":"13:44.310","Text":"double click to open up the sketch..."},{"Start":"13:44.990 ","End":"13:46.580","Text":"the sketch is not fully"},{"Start":"13:46.580 ","End":"13:48.060","Text":"constrained or defined."},{"Start":"13:49.139 ","End":"13:50.930","Text":"Now If I go to update the dimension"},{"Start":"13:50.990 ","End":"13:52.940","Text":"you’ll see that it totally throws off"},{"Start":"13:52.940 ","End":"13:55.580","Text":"the whole shape...and I’d have to also"},{"Start":"13:55.580 ","End":"13:58.009","Text":"manually update the other dimensions here."},{"Start":"13:59.139 ","End":"14:00.960","Text":"Now it may not seem like that big of"},{"Start":"14:00.960 ","End":"14:02.809","Text":"a deal because this square washer is"},{"Start":"14:02.809 ","End":"14:06.069","Text":"a fairly simple object… but as you"},{"Start":"14:06.070 ","End":"14:08.470","Text":"can imagine, as you start to 3D model"},{"Start":"14:08.480 ","End":"14:11.600","Text":"more complex objects...especially ones"},{"Start":"14:11.600 ","End":"14:14.069","Text":"that contain multiple sketches, it"},{"Start":"14:14.070 ","End":"14:16.580","Text":"can really suck up a lot of time and"},{"Start":"14:16.580 ","End":"14:18.910","Text":"cause a lot of problems if you don’t"},{"Start":"14:18.920 ","End":"14:21.209","Text":"plan ahead and fully constrain your"},{"Start":"14:21.210 ","End":"14:22.861","Text":"sketches based on your design intent."},{"Start":"14:22.861 ","End":"14:22.867","Text":"Lastly, be sure to check out the"},{"Start":"14:22.867 ","End":"14:22.871","Text":"comment section below where I’ll"},{"Start":"14:22.871 ","End":"14:22.879","Text":"post 3 helpful tips to follow when"},{"Start":"14:22.879 ","End":"14:24.640","Text":"working with Sketches in Fusion 360."}],"ID":29474},{"Watched":false,"Name":"Day 18 - Turning a .STL (Mesh) File into a Solid","Duration":"13m ","ChapterTopicVideoID":27821,"CourseChapterTopicPlaylistID":275347,"HasSubtitles":true,"ThumbnailPath":null,"UploadDate":null,"DurationForVideoObject":null,"Description":null,"MetaTitle":null,"MetaDescription":null,"Canonical":null,"VideoComments":[],"Subtitles":[{"Start":"00:00.150 ","End":"00:00.940","Text":"Kevin Kennedy: Hey there, It’s"},{"Start":"00:00.940 ","End":"00:02.770","Text":"Kevin Kennedy, and welcome to Day"},{"Start":"00:02.770 ","End":"00:06.290","Text":"#18 of Learn Fusion 360 in 30 days."},{"Start":"00:07.000 ","End":"00:08.700","Text":"By the end of this tutorial,"},{"Start":"00:08.929 ","End":"00:11.309","Text":"you’ll be able to turn an STL or"},{"Start":"00:11.380 ","End":"00:14.440","Text":"OBJ mesh file into a solid body."},{"Start":"00:15.389 ","End":"00:16.950","Text":"We’ll take a look at a few different"},{"Start":"00:16.950 ","End":"00:19.140","Text":"options while doing this and we’ll"},{"Start":"00:19.140 ","End":"00:20.810","Text":"talk about the meaning behind some"},{"Start":"00:20.810 ","End":"00:22.970","Text":"of this commonly used terminology"},{"Start":"00:22.980 ","End":"00:24.880","Text":"in the world of 3D printing!"},{"Start":"00:25.509 ","End":"00:27.339","Text":"Before we get started with actually"},{"Start":"00:27.340 ","End":"00:29.580","Text":"converting the mesh model I want to cover"},{"Start":"00:29.580 ","End":"00:31.390","Text":"some of the terminology to ensure we’re"},{"Start":"00:31.390 ","End":"00:33.830","Text":"on the same page, and so you actually"},{"Start":"00:33.860 ","End":"00:36.359","Text":"understand why we’re converting the model."},{"Start":"00:37.310 ","End":"00:39.940","Text":"To start off, we’ll discuss a mesh file..."},{"Start":"00:40.580 ","End":"00:42.430","Text":"Now if you’re familiar with 3D printing"},{"Start":"00:42.490 ","End":"00:46.860","Text":"and you use .STL files or .OBJ files then"},{"Start":"00:46.860 ","End":"00:49.000","Text":"you work with mesh files all the time."},{"Start":"00:49.009 ","End":"00:52.090","Text":"A mesh file is a collection of"},{"Start":"00:53.000 ","End":"00:54.720","Text":"vertices, edges, and faces that"},{"Start":"00:54.720 ","End":"00:56.680","Text":"define a 3D dimensional shape."},{"Start":"00:57.990 ","End":"00:59.720","Text":"Now I found this great image on"},{"Start":"00:59.870 ","End":"01:02.019","Text":"Wikipedia that breaks down a mesh."},{"Start":"01:02.760 ","End":"01:03.899","Text":"I’ll link to the image"},{"Start":"01:03.910 ","End":"01:05.200","Text":"in the video description."},{"Start":"01:05.860 ","End":"01:07.739","Text":"So you’ll see that it shows that mesh"},{"Start":"01:07.750 ","End":"01:10.759","Text":"files are created with vertices, edges,"},{"Start":"01:10.809 ","End":"01:13.869","Text":"and faces, which all create the polygon"},{"Start":"01:13.870 ","End":"01:16.250","Text":"sides or surfaces of the object."},{"Start":"01:17.550 ","End":"01:19.580","Text":"So looking at this last image here..."},{"Start":"01:19.720 ","End":"01:21.230","Text":"probably the most important"},{"Start":"01:21.230 ","End":"01:22.750","Text":"thing to know about meshes is"},{"Start":"01:22.750 ","End":"01:24.219","Text":"that they are surface models."},{"Start":"01:25.150 ","End":"01:28.030","Text":"Now to help you grasp this concept we"},{"Start":"01:28.030 ","End":"01:31.120","Text":"can compare it to real-life Origami."},{"Start":"01:32.110 ","End":"01:33.910","Text":"If we look at this object made out of"},{"Start":"01:33.910 ","End":"01:36.020","Text":"paper we see all of the different surfaces"},{"Start":"01:36.020 ","End":"01:39.590","Text":"that make up this overall shape, yet the"},{"Start":"01:39.650 ","End":"01:42.549","Text":"object is still hollow on the inside, as"},{"Start":"01:42.550 ","End":"01:45.219","Text":"it\u0027s solely made up of surface geometry."},{"Start":"01:46.309 ","End":"01:47.889","Text":"Now real quick let’s take a look"},{"Start":"01:47.889 ","End":"01:49.000","Text":"at the difference between the"},{"Start":"01:49.040 ","End":"01:51.080","Text":"two most common types of meshes,"},{"Start":"01:51.110 ","End":"01:53.680","Text":"which are .STL and an .OBJ files."},{"Start":"01:54.660 ","End":"01:57.650","Text":"An STL file is the native file format"},{"Start":"01:57.650 ","End":"02:00.360","Text":"for stereolithography and it\u0027s often"},{"Start":"02:00.360 ","End":"02:02.929","Text":"referred to as the acronym that represents"},{"Start":"02:03.389 ","End":"02:07.300","Text":"“Standard Triangle Language” OR “Standard"},{"Start":"02:07.440 ","End":"02:10.950","Text":"Tessellation Language.” Put simply,"},{"Start":"02:11.020 ","End":"02:13.530","Text":"an STL file is a type of mesh file"},{"Start":"02:13.540 ","End":"02:15.280","Text":"created with unstructured triangular"},{"Start":"02:15.700 ","End":"02:18.570","Text":"surfaces...so again, it’s just making"},{"Start":"02:18.570 ","End":"02:21.069","Text":"up the outer surface of the model and"},{"Start":"02:21.070 ","End":"02:23.449","Text":"it\u0027s NOT a completely solid object."},{"Start":"02:23.449 ","End":"02:27.940","Text":"Now on the other hand, we have .OBJ"},{"Start":"02:27.940 ","End":"02:30.109","Text":"files… and really the only difference"},{"Start":"02:30.110 ","End":"02:33.630","Text":"between an .STL file and a .OBJ"},{"Start":"02:33.630 ","End":"02:36.410","Text":"file is that the .OBJ file displays"},{"Start":"02:36.420 ","End":"02:38.540","Text":"some extra data on the surface."},{"Start":"02:39.630 ","End":"02:41.540","Text":"So you’ll see that .stl files are"},{"Start":"02:41.590 ","End":"02:44.040","Text":"always gray, whereas .OBJ files"},{"Start":"02:44.040 ","End":"02:46.530","Text":"can contain color and texture data,"},{"Start":"02:46.890 ","End":"02:49.109","Text":"which are displayed on the surface."},{"Start":"02:50.370 ","End":"02:52.540","Text":"The color and texture map are most"},{"Start":"02:52.550 ","End":"02:54.650","Text":"commonly captured by 3D scanners,"},{"Start":"02:54.700 ","End":"02:56.560","Text":"which is why most 3D scanners are"},{"Start":"02:56.570 ","End":"02:58.700","Text":"going to output your .OBJ file."},{"Start":"03:00.430 ","End":"03:02.100","Text":"Now the last term that you’ll need to"},{"Start":"03:02.100 ","End":"03:03.920","Text":"understand here before I do a little"},{"Start":"03:03.920 ","End":"03:06.010","Text":"demo and actually convert a file..."},{"Start":"03:06.070 ","End":"03:09.619","Text":"is the term “BREP.” Now, BREP stands for"},{"Start":"03:09.630 ","End":"03:12.880","Text":"boundary representation and can be seen"},{"Start":"03:12.880 ","End":"03:15.359","Text":"as the opposite of our mesh files, as it’s"},{"Start":"03:15.360 ","End":"03:17.999","Text":"a completely solid and watertight model."},{"Start":"03:19.190 ","End":"03:21.840","Text":"A BREP file is made up of topological"},{"Start":"03:21.970 ","End":"03:23.489","Text":"and geometric information."},{"Start":"03:25.650 ","End":"03:27.340","Text":"Alrighty, so now that you’re familiar"},{"Start":"03:27.340 ","End":"03:29.290","Text":"with some of the common terminology let’s"},{"Start":"03:29.290 ","End":"03:31.669","Text":"take a look at how to use Fusion 360 to"},{"Start":"03:31.670 ","End":"03:35.220","Text":"convert an .STL file to a BREP solid body."},{"Start":"03:36.549 ","End":"03:38.500","Text":"The first thing we’ll want to do is make"},{"Start":"03:38.500 ","End":"03:40.900","Text":"sure that the mesh workspace is enabled."},{"Start":"03:41.270 ","End":"03:43.320","Text":"To do this I’ll select the preferences"},{"Start":"03:43.320 ","End":"03:46.390","Text":"menu from the profile dropdown list and"},{"Start":"03:46.390 ","End":"03:48.720","Text":"then I’ll select “preview” and you’ll"},{"Start":"03:48.720 ","End":"03:50.239","Text":"see that we can toggle the mesh workspace"},{"Start":"03:51.009 ","End":"03:53.089","Text":"on and off by clicking the checkbox."},{"Start":"03:54.680 ","End":"03:56.549","Text":"Now after clicking the checkbox"},{"Start":"03:56.590 ","End":"03:58.030","Text":"you’ll have to hit the apply"},{"Start":"03:58.030 ","End":"04:00.580","Text":"button and then the okay button."},{"Start":"04:01.850 ","End":"04:04.610","Text":"Now a lot of Fusion 360 users get"},{"Start":"04:04.660 ","End":"04:08.140","Text":".stl files from Thingiverse.com and"},{"Start":"04:08.140 ","End":"04:09.820","Text":"they want to modify them to fit their"},{"Start":"04:09.820 ","End":"04:11.739","Text":"own needs or they simply want to"},{"Start":"04:11.770 ","End":"04:14.210","Text":"customize them with their name or logo."},{"Start":"04:15.620 ","End":"04:18.290","Text":"So I’ve downloaded this phone stand"},{"Start":"04:18.290 ","End":"04:20.630","Text":"Thingiverse file and the first thing I’ll"},{"Start":"04:20.630 ","End":"04:23.479","Text":"have to do is import it into Fusion 360.."},{"Start":"04:24.429 ","End":"04:25.493","Text":"and there are two ways"},{"Start":"04:25.670 ","End":"04:26.640","Text":"that we can do this."},{"Start":"04:27.640 ","End":"04:30.000","Text":"The first way would be to open up the data"},{"Start":"04:30.000 ","End":"04:32.719","Text":"panel and click the blue upload button."},{"Start":"04:33.580 ","End":"04:35.900","Text":"Then, If I select the file I can"},{"Start":"04:35.950 ","End":"04:38.630","Text":"upload it and double click on it to"},{"Start":"04:38.639 ","End":"04:40.630","Text":"open it once it\u0027s has been uploaded."},{"Start":"04:40.630 ","End":"04:46.319","Text":"The second way I can do this is to simply"},{"Start":"04:46.320 ","End":"04:49.479","Text":"go to the insert menu, select insert"},{"Start":"04:49.480 ","End":"04:51.800","Text":"mesh from the dropdown list...and then"},{"Start":"04:51.800 ","End":"04:53.890","Text":"I’ll go ahead and select the file…."},{"Start":"04:56.280 ","End":"04:57.770","Text":"And you’ll see that before we"},{"Start":"04:57.770 ","End":"04:59.210","Text":"can work on the file it allows"},{"Start":"04:59.210 ","End":"05:01.269","Text":"us to change the orientation."},{"Start":"05:02.190 ","End":"05:04.020","Text":"Now I want the top of the phone stand"},{"Start":"05:04.020 ","End":"05:06.469","Text":"to be the top of my orientation in the"},{"Start":"05:06.840 ","End":"05:08.760","Text":"viewcube, so I can either drag these"},{"Start":"05:08.770 ","End":"05:12.290","Text":"sliders around or I can select the flip-up"},{"Start":"05:12.290 ","End":"05:15.359","Text":"direction in the insert mesh dialogue box."},{"Start":"05:17.450 ","End":"05:19.919","Text":"And I can also hit “center” to move it"},{"Start":"05:19.920 ","End":"05:23.550","Text":"to the center origin and if your file"},{"Start":"05:23.609 ","End":"05:25.950","Text":"is floating in space for some reason"},{"Start":"05:26.300 ","End":"05:28.640","Text":"you can hit move to ground to move"},{"Start":"05:29.190 ","End":"05:32.799","Text":"it to the XZ or XY plane, depending"},{"Start":"05:32.800 ","End":"05:34.970","Text":"on how your orientation is set up."},{"Start":"05:36.570 ","End":"05:38.330","Text":"So I’ll go ahead and click okay to"},{"Start":"05:38.330 ","End":"05:40.419","Text":"confirm these orientation changes."},{"Start":"05:42.740 ","End":"05:44.770","Text":"Now if I go to the workspaces menu"},{"Start":"05:44.800 ","End":"05:46.659","Text":"you’ll see that I still can’t switch"},{"Start":"05:46.660 ","End":"05:48.670","Text":"to the mesh workspace and that’s"},{"Start":"05:48.670 ","End":"05:50.710","Text":"because the mesh workspace does not"},{"Start":"05:50.710 ","End":"05:53.110","Text":"allow design history to be captured."},{"Start":"05:53.990 ","End":"05:55.989","Text":"So we’ll have to turn off the design"},{"Start":"05:55.990 ","End":"05:58.240","Text":"history by right-clicking on the file"},{"Start":"05:58.279 ","End":"06:01.580","Text":"in the browser and I’ll select “Do"},{"Start":"06:01.580 ","End":"06:04.049","Text":"Not Capture Design History” and I’ll"},{"Start":"06:04.050 ","End":"06:06.270","Text":"click the continue button to confirm."},{"Start":"06:07.570 ","End":"06:09.799","Text":"Now if I go back to the workspace"},{"Start":"06:09.800 ","End":"06:11.300","Text":"selection menu you’ll see that I"},{"Start":"06:11.300 ","End":"06:15.559","Text":"can change to the Mesh Workspace."},{"Start":"06:15.559 ","End":"06:18.280","Text":"I’m also going to change my visual"},{"Start":"06:18.289 ","End":"06:20.590","Text":"style so it’s a bit easier to see all"},{"Start":"06:20.590 ","End":"06:22.360","Text":"the triangles that make up the mesh."},{"Start":"06:23.220 ","End":"06:25.320","Text":"Under the display settings, I’ll select"},{"Start":"06:25.330 ","End":"06:27.640","Text":"visual style, and then I’ll select"},{"Start":"06:27.650 ","End":"06:30.919","Text":"“shaded with visible edges only.” and"},{"Start":"06:30.920 ","End":"06:32.649","Text":"you’ll see that if I zoom in we can"},{"Start":"06:32.650 ","End":"06:35.509","Text":"now see all of the vertices, edges,"},{"Start":"06:35.580 ","End":"06:37.920","Text":"and faces that make up the mesh model."},{"Start":"06:39.920 ","End":"06:42.380","Text":"Now what confuses A LOT of users"},{"Start":"06:42.380 ","End":"06:44.030","Text":"here is that we’ll actually need"},{"Start":"06:44.030 ","End":"06:45.659","Text":"to be in the Model workspace"},{"Start":"06:45.660 ","End":"06:47.490","Text":"in order to convert this model."},{"Start":"06:48.400 ","End":"06:51.010","Text":"So I’ll select the model workspace… and"},{"Start":"06:51.010 ","End":"06:53.420","Text":"now to convert this mesh to a solid body"},{"Start":"06:53.609 ","End":"06:55.480","Text":"all we’ll have to do is right-click on"},{"Start":"06:55.480 ","End":"06:59.270","Text":"the mesh and select “mesh to brep.” And"},{"Start":"06:59.270 ","End":"07:01.570","Text":"you’ll see in the dialogue box we can have"},{"Start":"07:01.570 ","End":"07:04.559","Text":"it create a new body or a new component."},{"Start":"07:05.240 ","End":"07:06.860","Text":"So I’ll go ahead and select “new"},{"Start":"07:06.880 ","End":"07:08.650","Text":"component” and then click okay."},{"Start":"07:11.459 ","End":"07:13.770","Text":"Now I’ll switch over to another example"},{"Start":"07:13.770 ","End":"07:15.860","Text":"real quick, because if you imported"},{"Start":"07:15.880 ","End":"07:18.480","Text":"a fairly complex model then it’s"},{"Start":"07:18.930 ","End":"07:20.500","Text":"likely you’ll get an error message"},{"Start":"07:20.500 ","End":"07:22.209","Text":"at this point stating that there are"},{"Start":"07:22.210 ","End":"07:24.979","Text":"too many facets or number of faces"},{"Start":"07:25.230 ","End":"07:27.469","Text":"for Fusion 360 to convert the model."},{"Start":"07:28.660 ","End":"07:30.910","Text":"So looking at this example here it looks"},{"Start":"07:30.910 ","End":"07:33.930","Text":"like it has a little over 1.5 million"},{"Start":"07:33.930 ","End":"07:37.400","Text":"faces… and Fusion 360 can really only"},{"Start":"07:37.400 ","End":"07:40.670","Text":"compute approximately 50,000 facets."},{"Start":"07:41.240 ","End":"07:42.939","Text":"So before converting we’ll"},{"Start":"07:43.219 ","End":"07:44.323","Text":"first have to reduce the facets."},{"Start":"07:44.323 ","End":"07:49.310","Text":"To reduce the number of faces you\u0027ll"},{"Start":"07:49.310 ","End":"07:51.670","Text":"have to switch to the mesh workspace"},{"Start":"07:51.670 ","End":"07:53.390","Text":"and then you can select “reduce”"},{"Start":"07:53.430 ","End":"07:55.270","Text":"from the modify dropdown list."},{"Start":"07:56.340 ","End":"07:57.490","Text":"Now we’ll first have to select"},{"Start":"07:57.490 ","End":"08:00.139","Text":"the mesh faces or a body."},{"Start":"08:00.710 ","End":"08:02.690","Text":"So in some scenarios, you’ll want"},{"Start":"08:02.690 ","End":"08:04.099","Text":"to select only a certain area of"},{"Start":"08:04.230 ","End":"08:06.379","Text":"faces and in others, we’ll want to"},{"Start":"08:06.380 ","End":"08:08.039","Text":"go ahead and just select the entire"},{"Start":"08:08.040 ","End":"08:10.440","Text":"body from the Fusion 360 browser."},{"Start":"08:12.020 ","End":"08:13.070","Text":"The next option you’ll"},{"Start":"08:13.070 ","End":"08:14.720","Text":"see is the reduce type."},{"Start":"08:15.429 ","End":"08:17.590","Text":"Adaptive means that Fusion will adapt"},{"Start":"08:17.590 ","End":"08:19.780","Text":"the surface triangles how it best fits"},{"Start":"08:19.790 ","End":"08:22.709","Text":"the shapes or uniform will force them"},{"Start":"08:22.709 ","End":"08:25.210","Text":"to all be uniform in shape and size."},{"Start":"08:25.670 ","End":"08:27.760","Text":"So for this complex object, I’ll"},{"Start":"08:27.760 ","End":"08:30.190","Text":"leave it set to adaptive so it doesn’t"},{"Start":"08:30.200 ","End":"08:32.120","Text":"totally skew the overall shape."},{"Start":"08:33.880 ","End":"08:35.430","Text":"Now we want to reduce the amount"},{"Start":"08:35.430 ","End":"08:37.010","Text":"of faces so we’ll have to select"},{"Start":"08:37.049 ","End":"08:38.979","Text":"“face count” for the reduce target…."},{"Start":"08:39.650 ","End":"08:41.329","Text":"And then for the number of faces,"},{"Start":"08:41.400 ","End":"08:43.099","Text":"like we talked about a minute ago,"},{"Start":"08:43.360 ","End":"08:46.699","Text":"we’ll have to have this under 50,000…"},{"Start":"08:47.940 ","End":"08:49.810","Text":"and it’s a good idea to aim much"},{"Start":"08:49.810 ","End":"08:52.700","Text":"lower as the more faces it has the"},{"Start":"08:52.700 ","End":"08:55.440","Text":"more data Fusion 360 has to process"},{"Start":"08:56.230 ","End":"08:58.099","Text":"so your file will be much slower."},{"Start":"08:58.119 ","End":"09:02.240","Text":"So I’m just going to type out"},{"Start":"09:02.250 ","End":"09:05.560","Text":"30,000 and click okay… and this"},{"Start":"09:05.580 ","End":"09:07.590","Text":"may take a while to process because"},{"Start":"09:07.650 ","End":"09:10.340","Text":"30,000 is still a lot of faces."},{"Start":"09:12.020 ","End":"09:14.180","Text":"Once it’s done processing you’ll see that"},{"Start":"09:14.180 ","End":"09:16.420","Text":"if we switch back to the model workspace"},{"Start":"09:16.430 ","End":"09:18.429","Text":"we can right-click on the mesh and select"},{"Start":"09:18.449 ","End":"09:23.089","Text":"mesh to brep… and this time it will"},{"Start":"09:23.089 ","End":"09:25.510","Text":"convert for us, although it will give"},{"Start":"09:25.510 ","End":"09:27.313","Text":"us a warning...again, because there are"},{"Start":"09:27.389 ","End":"09:29.549","Text":"a lot of faces which may slow down the"},{"Start":"09:29.549 ","End":"09:32.104","Text":"file quite a bit… so I’d always recommend"},{"Start":"09:32.104 ","End":"09:34.650","Text":"reducing the face count as much as you"},{"Start":"09:34.650 ","End":"09:37.030","Text":"can without destroying your overall shape."},{"Start":"09:39.080 ","End":"09:41.040","Text":"Now let’s switch back to the phone stand"},{"Start":"09:41.040 ","End":"09:42.890","Text":"demo and look at a few more things that"},{"Start":"09:42.890 ","End":"09:45.040","Text":"we can do after we convert our file."},{"Start":"09:47.259 ","End":"09:48.880","Text":"I’ll go ahead and re-name the"},{"Start":"09:48.880 ","End":"09:49.637","Text":"component “Phone Stand” by"},{"Start":"09:49.710 ","End":"09:51.409","Text":"double-clicking on it in the browser."},{"Start":"09:51.710 ","End":"09:55.670","Text":"And I’ll make sure that the mesh"},{"Start":"09:55.680 ","End":"09:57.570","Text":"body is hidden and that our new"},{"Start":"09:57.570 ","End":"09:59.960","Text":"component is visible and activated."},{"Start":"10:02.720 ","End":"10:05.209","Text":"Now Fusion 360 did a pretty good job of"},{"Start":"10:05.219 ","End":"10:07.390","Text":"processing this file and turning it into"},{"Start":"10:07.390 ","End":"10:09.509","Text":"a solid body, but you’ll see here that"},{"Start":"10:09.509 ","End":"10:12.229","Text":"we still have A LOT of triangular surface"},{"Start":"10:12.230 ","End":"10:15.000","Text":"faces that make up our solid body...and"},{"Start":"10:15.000 ","End":"10:17.340","Text":"sometimes these can get in the way of us"},{"Start":"10:17.400 ","End":"10:19.790","Text":"altering the design to our specific needs."},{"Start":"10:22.190 ","End":"10:24.490","Text":"So one thing that we can do is reduce the"},{"Start":"10:24.490 ","End":"10:27.120","Text":"number of faces by merging them together."},{"Start":"10:28.799 ","End":"10:30.150","Text":"If I wanted to work on this"},{"Start":"10:30.150 ","End":"10:31.710","Text":"flat surface here these"},{"Start":"10:31.710 ","End":"10:33.100","Text":"triangles would get in the way.."},{"Start":"10:33.310 ","End":"10:34.359","Text":"So let’s go ahead and"},{"Start":"10:34.360 ","End":"10:35.469","Text":"get rid of some of them."},{"Start":"10:35.930 ","End":"10:37.860","Text":"Now I could zoom in and select all of"},{"Start":"10:37.860 ","End":"10:40.099","Text":"these one by one, but an easier way"},{"Start":"10:40.099 ","End":"10:42.089","Text":"would be to use the paint selection"},{"Start":"10:42.090 ","End":"10:44.230","Text":"tool, which is going to allow me to"},{"Start":"10:44.230 ","End":"10:46.819","Text":"click with my mouse and drag over all"},{"Start":"10:46.820 ","End":"10:49.640","Text":"these faces to select them much faster."},{"Start":"10:51.970 ","End":"10:54.000","Text":"Before using the paint selection I’ll"},{"Start":"10:54.000 ","End":"10:56.210","Text":"want to set the selection priority to"},{"Start":"10:56.210 ","End":"10:59.030","Text":"“select face priority” which will help"},{"Start":"10:59.030 ","End":"11:01.130","Text":"ensure that we don’t select the entire"},{"Start":"11:01.130 ","End":"11:04.080","Text":"component...and if we go back up to the"},{"Start":"11:04.080 ","End":"11:06.620","Text":"menu and look at the selection filters"},{"Start":"11:07.170 ","End":"11:09.290","Text":"you’ll see that we can see that activating"},{"Start":"11:09.290 ","End":"11:11.580","Text":"the “select face priority” feature"},{"Start":"11:11.580 ","End":"11:14.110","Text":"turned all these other options off and"},{"Start":"11:14.190 ","End":"11:16.860","Text":"only left the “body faces” turned on.."},{"Start":"11:17.469 ","End":"11:18.870","Text":"which will again help us"},{"Start":"11:18.880 ","End":"11:20.510","Text":"select only the faces."},{"Start":"11:22.289 ","End":"11:24.449","Text":"Now with the paint selection activated"},{"Start":"11:24.490 ","End":"11:26.890","Text":"I can click and drag across a number of"},{"Start":"11:26.890 ","End":"11:29.970","Text":"these faces… and if I miss any I’ll just"},{"Start":"11:29.970 ","End":"11:31.989","Text":"hold down the shift key and select them."},{"Start":"11:34.030 ","End":"11:35.960","Text":"Then, I’ll switch to the patch"},{"Start":"11:35.969 ","End":"11:37.980","Text":"workspace and I’ll select “merge”"},{"Start":"11:38.009 ","End":"11:39.589","Text":"from the modify dropdown list."},{"Start":"11:39.589 ","End":"11:52.235","Text":"And you’ll see that I can continue"},{"Start":"11:52.590 ","End":"11:54.760","Text":"to select and merge faces to really"},{"Start":"11:54.760 ","End":"11:56.510","Text":"clean up this solid body model"},{"Start":"11:56.750 ","End":"11:58.560","Text":"so it doesn’t have so many faces."},{"Start":"11:58.570 ","End":"12:06.680","Text":"Now having less faces will really allow"},{"Start":"12:06.680 ","End":"12:08.560","Text":"us to focus on the tools in the model"},{"Start":"12:08.560 ","End":"12:11.039","Text":"workspace and won’t restrict us as much"},{"Start":"12:11.410 ","End":"12:14.060","Text":"as we try to modify our new solid body."},{"Start":"12:16.420 ","End":"12:17.979","Text":"There’s one more thing I want to show"},{"Start":"12:17.980 ","End":"12:20.060","Text":"you here in order to summarize what I"},{"Start":"12:20.060 ","End":"12:23.660","Text":"covered in this video… If I turn on the"},{"Start":"12:23.670 ","End":"12:25.770","Text":"section analysis in order to look into"},{"Start":"12:25.770 ","End":"12:32.640","Text":"the side of the object you’ll see that"},{"Start":"12:32.640 ","End":"12:36.870","Text":"our brep is a completely solid model…"},{"Start":"12:37.109 ","End":"12:39.710","Text":"and if I toggle the .stl mesh back"},{"Start":"12:39.740 ","End":"12:42.620","Text":"on and turn the component or solid"},{"Start":"12:42.620 ","End":"12:45.379","Text":"model off you’ll see that it’s a thin"},{"Start":"12:45.380 ","End":"12:47.970","Text":"surface model created with hundreds of"},{"Start":"12:56.990 ","End":"12:57.135","Text":"meshes...as there’s no data inside here."}],"ID":29001},{"Watched":false,"Name":"Day 19 - 3D Model a Hinged Box (Part 1 of 2)","Duration":"12m 25s","ChapterTopicVideoID":28239,"CourseChapterTopicPlaylistID":275347,"HasSubtitles":true,"ThumbnailPath":null,"UploadDate":null,"DurationForVideoObject":null,"Description":null,"MetaTitle":null,"MetaDescription":null,"Canonical":null,"VideoComments":[],"Subtitles":[{"Start":"00:00.060 ","End":"00:00.950","Text":"Kevin Kennedy: Hey there, It’s"},{"Start":"00:00.950 ","End":"00:02.890","Text":"Kevin Kennedy, and welcome to Day"},{"Start":"00:02.890 ","End":"00:06.660","Text":"#19 of Learn Fusion 360 in 30 days."},{"Start":"00:07.070 ","End":"00:08.910","Text":"By the end of this tutorial,"},{"Start":"00:09.150 ","End":"00:10.850","Text":"you’ll be able to 3D model a"},{"Start":"00:10.860 ","End":"00:13.070","Text":"hinged box for 3D printing."},{"Start":"00:13.759 ","End":"00:15.159","Text":"We’ll take a look at how to set"},{"Start":"00:15.160 ","End":"00:17.770","Text":"up user parameters, how to apply"},{"Start":"00:17.809 ","End":"00:20.510","Text":"an as-built joint, and how to"},{"Start":"00:20.510 ","End":"00:22.770","Text":"prepare the part for 3D printing."},{"Start":"00:23.310 ","End":"00:24.760","Text":"Before we get started with the"},{"Start":"00:24.760 ","End":"00:26.370","Text":"box, let’s make sure that our"},{"Start":"00:26.370 ","End":"00:28.520","Text":"preferences are set up the same way."},{"Start":"00:28.960 ","End":"00:31.309","Text":"I’ll click on my user profile and then"},{"Start":"00:31.330 ","End":"00:33.839","Text":"preferences, and I’m going to make sure"},{"Start":"00:33.839 ","End":"00:35.989","Text":"that my “Default Modeling Orientation”"},{"Start":"00:36.170 ","End":"00:40.190","Text":"is set to Z-Up, because that’s how most"},{"Start":"00:40.190 ","End":"00:42.810","Text":"3D printer slicing software is set up."},{"Start":"00:43.880 ","End":"00:46.160","Text":"If you do have to change any settings"},{"Start":"00:46.160 ","End":"00:47.709","Text":"here, then be sure to select the"},{"Start":"00:47.710 ","End":"00:50.529","Text":"apply button and then the okay button."},{"Start":"00:52.959 ","End":"00:55.019","Text":"If I go down to my display settings"},{"Start":"00:55.050 ","End":"00:56.800","Text":"you’ll see that I’m in the “photobooth”"},{"Start":"00:56.860 ","End":"01:00.000","Text":"environment and that my visual style is"},{"Start":"01:00.000 ","End":"01:03.690","Text":"set to “shaded with visual edges only.”"},{"Start":"01:04.840 ","End":"01:06.440","Text":"You’ll also want to make sure that your"},{"Start":"01:06.440 ","End":"01:09.220","Text":"layout grid and snap to grid are selected"},{"Start":"01:09.270 ","End":"01:13.850","Text":"under the “grid and snaps” menu… and last"},{"Start":"01:13.850 ","End":"01:15.910","Text":"but not least you’ll want to double-check"},{"Start":"01:15.940 ","End":"01:18.020","Text":"that you are in the model workspace."},{"Start":"01:20.910 ","End":"01:22.880","Text":"Now let’s start creating the bottom lid of"},{"Start":"01:22.880 ","End":"01:25.509","Text":"our box by first creating a new component."},{"Start":"01:26.320 ","End":"01:28.160","Text":"I’ll select new component from"},{"Start":"01:28.160 ","End":"01:29.800","Text":"the “assemble” dropdown menu."},{"Start":"01:30.759 ","End":"01:33.150","Text":"In the new component dialogue box, I’ll"},{"Start":"01:33.150 ","End":"01:35.040","Text":"make sure that “empty component” is"},{"Start":"01:35.040 ","End":"01:38.190","Text":"selected and then I’ll type in “Bottom"},{"Start":"01:38.190 ","End":"01:41.139","Text":"Box” for the name and click okay."},{"Start":"01:43.429 ","End":"01:45.849","Text":"Now we can begin to draw the box shape."},{"Start":"01:46.529 ","End":"01:48.399","Text":"I’ll call the rectangle sketch tool"},{"Start":"01:48.410 ","End":"01:50.370","Text":"with the keyboard shortcut letter “R”"},{"Start":"01:50.890 ","End":"01:52.570","Text":"and I’ll click on the bottom plane."},{"Start":"01:53.980 ","End":"01:56.170","Text":"Then, I’ll click on the origin"},{"Start":"01:56.179 ","End":"01:58.449","Text":"point and drag out with my mouse."},{"Start":"01:59.250 ","End":"02:03.150","Text":"I’ll type out 70mm, hit the tab key"},{"Start":"02:03.179 ","End":"02:05.289","Text":"to lock the dimension in place, and"},{"Start":"02:05.289 ","End":"02:07.860","Text":"then I’ll type out 70mm for the other"},{"Start":"02:07.860 ","End":"02:12.530","Text":"side, and then you’ll notice that we"},{"Start":"02:12.530 ","End":"02:14.310","Text":"can’t do anything other than click on"},{"Start":"02:14.380 ","End":"02:17.010","Text":"any side of the origin point...so I’ll"},{"Start":"02:17.010 ","End":"02:19.030","Text":"just click in one of the directions."},{"Start":"02:19.790 ","End":"02:22.139","Text":"And real quick I’ll point out like we"},{"Start":"02:22.139 ","End":"02:25.380","Text":"talked about in day #17, we always want"},{"Start":"02:25.390 ","End":"02:27.410","Text":"to make sure our sketches are fully"},{"Start":"02:27.410 ","End":"02:30.480","Text":"constrained and dimensioned as signified"},{"Start":"02:30.490 ","End":"02:32.950","Text":"by all of the sketch lines turning black."},{"Start":"02:34.500 ","End":"02:36.619","Text":"Also, before we move on, let’s"},{"Start":"02:36.620 ","End":"02:38.609","Text":"find the sketch in the Fusion 360"},{"Start":"02:38.620 ","End":"02:40.469","Text":"browser, and we’ll click on the"},{"Start":"02:40.469 ","End":"02:43.150","Text":"word sketch and rename it “Box.”"},{"Start":"02:44.850 ","End":"02:46.220","Text":"Now before we get started with"},{"Start":"02:46.220 ","End":"02:47.600","Text":"the box shape, we’ll want to"},{"Start":"02:47.610 ","End":"02:49.450","Text":"set up some user parameters."},{"Start":"02:50.309 ","End":"02:51.899","Text":"I’ll go to the modify dropdown"},{"Start":"02:51.900 ","End":"02:54.109","Text":"menu, and then select “change"},{"Start":"02:54.139 ","End":"02:56.530","Text":"parameters” at the bottom of the list."},{"Start":"02:58.940 ","End":"03:00.500","Text":"Now I know a lot of you are just"},{"Start":"03:00.510 ","End":"03:02.840","Text":"getting into Fusion 360 AND this may"},{"Start":"03:02.850 ","End":"03:05.200","Text":"even be your first real CAD program."},{"Start":"03:05.870 ","End":"03:07.810","Text":"So let’s take a minute to"},{"Start":"03:07.810 ","End":"03:10.010","Text":"discuss what parameters are…"},{"Start":"03:11.690 ","End":"03:12.979","Text":"If we look at the parameters"},{"Start":"03:12.980 ","End":"03:14.739","Text":"box you’ll see that we can add a"},{"Start":"03:14.750 ","End":"03:20.319","Text":"name...a unit… an expression..."},{"Start":"03:21.760 ","End":"03:26.969","Text":"a value… and some comments or notes."},{"Start":"03:28.389 ","End":"03:30.250","Text":"At its core, parameters are"},{"Start":"03:30.250 ","End":"03:32.470","Text":"mathematical variables that we can"},{"Start":"03:32.480 ","End":"03:35.520","Text":"set up, that are defined by a value."},{"Start":"03:36.340 ","End":"03:38.339","Text":"We can then call those values by"},{"Start":"03:38.360 ","End":"03:40.070","Text":"their names in order to define"},{"Start":"03:40.080 ","End":"03:43.200","Text":"sketch elements, feature sizes, and"},{"Start":"03:43.200 ","End":"03:45.590","Text":"geometry across different components."},{"Start":"03:47.410 ","End":"03:49.149","Text":"When we set up parameters we can"},{"Start":"03:49.150 ","End":"03:50.950","Text":"define them by a single numerical"},{"Start":"03:50.950 ","End":"03:54.350","Text":"value, an equation, or we can"},{"Start":"03:54.910 ","End":"03:56.720","Text":"even reference other parameters."},{"Start":"03:57.850 ","End":"04:00.220","Text":"So in some use cases, we may set our"},{"Start":"04:00.220 ","End":"04:02.370","Text":"parameters up so we can change one"},{"Start":"04:02.370 ","End":"04:05.000","Text":"single parameter, in which the other"},{"Start":"04:05.010 ","End":"04:07.489","Text":"aspects of the model are all updated"},{"Start":"04:07.499 ","End":"04:12.419","Text":"simultaneously, giving you a tremendous"},{"Start":"04:12.420 ","End":"04:14.370","Text":"amount of control over the model."},{"Start":"04:15.800 ","End":"04:17.610","Text":"So to set up some user parameters"},{"Start":"04:17.610 ","End":"04:19.150","Text":"we’ll click on the plus sign"},{"Start":"04:19.310 ","End":"04:21.670","Text":"and a dialogue box will pop up."},{"Start":"04:22.410 ","End":"04:25.459","Text":"We’ll then enter a name… so the first"},{"Start":"04:25.469 ","End":"04:27.080","Text":"parameter I’m going to set up is"},{"Start":"04:27.080 ","End":"04:29.009","Text":"the wall thickness for our 3D print."},{"Start":"04:30.080 ","End":"04:31.910","Text":"Now as you’re typing out names you’ll"},{"Start":"04:31.910 ","End":"04:34.080","Text":"notice that we can’t use spaces or"},{"Start":"04:34.080 ","End":"04:36.240","Text":"hyphens, so it\u0027s good practice to"},{"Start":"04:36.240 ","End":"04:38.440","Text":"type out the names in Camel Case,"},{"Start":"04:38.889 ","End":"04:41.249","Text":"where each new word is capitalized."},{"Start":"04:43.460 ","End":"04:45.650","Text":"For the units, we will leave that"},{"Start":"04:45.650 ","End":"04:47.689","Text":"set to mm, and then we will type"},{"Start":"04:47.690 ","End":"04:50.910","Text":"in 1.3 for the wall thickness, as"},{"Start":"04:50.910 ","End":"04:52.380","Text":"I’ve found that works well with"},{"Start":"04:52.400 ","End":"04:55.599","Text":"most consumer-level FDM 3D printers."},{"Start":"04:57.150 ","End":"04:59.290","Text":"For the comment we can leave this blank if"},{"Start":"04:59.300 ","End":"05:02.719","Text":"we want, as it’s not required, or you can"},{"Start":"05:02.719 ","End":"05:04.949","Text":"type something that may help a colleague"},{"Start":"05:05.059 ","End":"05:07.470","Text":"understand the parameter… so I may"},{"Start":"05:07.470 ","End":"05:10.480","Text":"type something out like “FDM 3D Printer"},{"Start":"05:10.520 ","End":"05:12.830","Text":"Thickness.” and then I’ll click okay."},{"Start":"05:14.450 ","End":"05:15.370","Text":"Now we’re going to add"},{"Start":"05:15.380 ","End":"05:17.130","Text":"2 more user parameters."},{"Start":"05:17.280 ","End":"05:18.710","Text":"We’ll click on the plus symbol"},{"Start":"05:18.710 ","End":"05:21.849","Text":"again and add “BoxHeight” and"},{"Start":"05:21.849 ","End":"05:24.419","Text":"we’ll enter 70mm and click okay."},{"Start":"05:26.150 ","End":"05:28.140","Text":"And for the last user parameter, we’re"},{"Start":"05:28.150 ","End":"05:30.400","Text":"going to set the gap of our hinge."},{"Start":"05:31.230 ","End":"05:33.150","Text":"I’ll click the plus sign once again"},{"Start":"05:33.520 ","End":"05:35.900","Text":"and I’ll type out “Gap” and then"},{"Start":"05:35.900 ","End":"05:38.979","Text":".5 for the value and click okay."},{"Start":"05:40.350 ","End":"05:42.419","Text":"Now again, these are just some user"},{"Start":"05:42.420 ","End":"05:44.300","Text":"parameters that we’ve set up to start out"},{"Start":"05:44.300 ","End":"05:46.460","Text":"with, but we can always go back to this"},{"Start":"05:46.460 ","End":"05:49.170","Text":"menu at any time to change these user"},{"Start":"05:49.180 ","End":"05:53.640","Text":"parameters or add more should we need to."},{"Start":"05:54.150 ","End":"05:55.770","Text":"Let’s go ahead and click okay to"},{"Start":"05:55.770 ","End":"05:57.889","Text":"close the parameter dialogue box."},{"Start":"05:57.889 ","End":"06:01.300","Text":"Now let’s extrude this"},{"Start":"06:01.300 ","End":"06:02.560","Text":"sketch to make a cube."},{"Start":"06:02.670 ","End":"06:04.680","Text":"I’ll hit the keyboard shortcut letter “E”"},{"Start":"06:04.680 ","End":"06:07.320","Text":"for extrude and then click on the sketch."},{"Start":"06:08.150 ","End":"06:09.850","Text":"Now if we look at the extrude dialogue"},{"Start":"06:10.410 ","End":"06:11.780","Text":"you’ll see that we can type in the"},{"Start":"06:11.780 ","End":"06:14.799","Text":"distance of our extrude… AND we can also"},{"Start":"06:14.799 ","End":"06:17.359","Text":"type in our user parameters in the field."},{"Start":"06:18.440 ","End":"06:20.710","Text":"So I can delete all of this text and"},{"Start":"06:20.710 ","End":"06:22.830","Text":"then start to type out “BoxHeight”..."},{"Start":"06:22.830 ","End":"06:25.210","Text":"and you’ll see that after I type out"},{"Start":"06:25.210 ","End":"06:28.140","Text":"the first letter it recommends the user"},{"Start":"06:28.140 ","End":"06:30.730","Text":"parameter for us...so we can just go ahead"},{"Start":"06:30.730 ","End":"06:32.990","Text":"and click on that and we’ll click okay."},{"Start":"06:34.799 ","End":"06:36.510","Text":"If we look at our model from the home"},{"Start":"06:36.550 ","End":"06:38.360","Text":"position you’ll see that the user"},{"Start":"06:38.360 ","End":"06:41.020","Text":"parameter worked as expected, and we have"},{"Start":"06:41.020 ","End":"06:44.640","Text":"a nice 70mm cube, as that was the value"},{"Start":"06:44.640 ","End":"06:46.940","Text":"we set for the “BoxHeight” parameter."},{"Start":"06:48.070 ","End":"06:49.510","Text":"At this point, we’ll need to make the"},{"Start":"06:49.510 ","End":"06:51.799","Text":"cube hollow by using the shell tool."},{"Start":"06:52.549 ","End":"06:53.690","Text":"I’ll select shell from"},{"Start":"06:53.690 ","End":"06:55.100","Text":"the modify dropdown list."},{"Start":"06:56.240 ","End":"06:58.480","Text":"With the shell tool if we just select"},{"Start":"06:58.480 ","End":"07:00.770","Text":"one face it will essentially cut away"},{"Start":"07:00.770 ","End":"07:03.090","Text":"the face of the cube and create the"},{"Start":"07:03.099 ","End":"07:06.060","Text":"thickness we apply… BUT we want our cube"},{"Start":"07:06.070 ","End":"07:07.930","Text":"to be completely closed because we’ll"},{"Start":"07:07.930 ","End":"07:13.020","Text":"use the split feature later on...so we"},{"Start":"07:13.039 ","End":"07:17.380","Text":"can select all 6 faces of this cube..."},{"Start":"07:22.260 ","End":"07:23.919","Text":"and we’ll need to type in our user"},{"Start":"07:23.920 ","End":"07:26.020","Text":"parameter “WallThickness” for the"},{"Start":"07:26.049 ","End":"07:28.929","Text":"“Inside Thickness” and click okay."},{"Start":"07:31.010 ","End":"07:37.760","Text":"Now to check that the shell worked"},{"Start":"07:37.760 ","End":"07:39.740","Text":"properly we’ll go up to the inspect"},{"Start":"07:39.770 ","End":"07:42.340","Text":"menu, and then select “section"},{"Start":"07:42.370 ","End":"07:45.669","Text":"analysis.” We’ll click on any side of"},{"Start":"07:45.670 ","End":"07:48.059","Text":"the cube and then drag the arrow in"},{"Start":"07:48.059 ","End":"07:50.330","Text":"a bit and we can see that our shell"},{"Start":"07:50.340 ","End":"07:52.659","Text":"did in fact work as we wanted..."},{"Start":"07:53.450 ","End":"07:54.719","Text":"so I’ll just hit cancel"},{"Start":"07:54.930 ","End":"07:56.440","Text":"in the dialogue box."},{"Start":"07:58.610 ","End":"08:00.560","Text":"Now we’ll need to create a plane"},{"Start":"08:00.630 ","End":"08:02.870","Text":"in order to split our box in half."},{"Start":"08:03.700 ","End":"08:05.810","Text":"We could use a midplane from the construct"},{"Start":"08:05.810 ","End":"08:08.039","Text":"dropdown menu, but I want to show you"},{"Start":"08:08.040 ","End":"08:10.169","Text":"another thing that we can do with user"},{"Start":"08:10.170 ","End":"08:13.180","Text":"parameters...so I’ll select offset plane…"},{"Start":"08:14.030 ","End":"08:16.100","Text":"and then I’ll select the top of the cube."},{"Start":"08:17.639 ","End":"08:19.549","Text":"For the distance I’ll type out the"},{"Start":"08:19.570 ","End":"08:21.900","Text":"minus symbol because I want to go into"},{"Start":"08:21.900 ","End":"08:25.190","Text":"the direction of my cube, then I’ll"},{"Start":"08:25.220 ","End":"08:27.630","Text":"type out the “BoxHeight” parameter"},{"Start":"08:28.110 ","End":"08:30.020","Text":"and we’ll divide it in half using"},{"Start":"08:30.030 ","End":"08:32.620","Text":"the forward-slash and then number 2."},{"Start":"08:33.710 ","End":"08:35.860","Text":"And you’ll see that put our construction"},{"Start":"08:35.860 ","End":"08:38.350","Text":"plane directly in half or the middle"},{"Start":"08:38.350 ","End":"08:40.890","Text":"of the cube… and if we go to update the"},{"Start":"08:40.909 ","End":"08:43.140","Text":"box height later on our construction"},{"Start":"08:43.140 ","End":"08:45.550","Text":"plane will always be split directly"},{"Start":"08:45.550 ","End":"08:47.060","Text":"in the middle because we used ½"},{"Start":"08:47.610 ","End":"08:49.740","Text":"of the box height user parameter."},{"Start":"08:50.630 ","End":"08:53.680","Text":"So I’ll click okay to confirm the results."},{"Start":"08:55.559 ","End":"08:57.740","Text":"I now want to split this cube in half.."},{"Start":"08:57.759 ","End":"08:59.439","Text":"So I’ll select “split body”"},{"Start":"08:59.449 ","End":"09:01.220","Text":"from the modify dropdown menu."},{"Start":"09:02.260 ","End":"09:04.130","Text":"I’ll first have to select the body to"},{"Start":"09:04.130 ","End":"09:07.200","Text":"split so I’ll select the cube, and then"},{"Start":"09:07.200 ","End":"09:09.140","Text":"I’ll select the construction plane for"},{"Start":"09:09.140 ","End":"09:12.050","Text":"the “splitting tool” and then click okay."},{"Start":"09:13.540 ","End":"09:15.770","Text":"Now if we look in the body folder in"},{"Start":"09:15.900 ","End":"09:18.580","Text":"the Browser we’ll see that we have a"},{"Start":"09:18.650 ","End":"09:21.500","Text":"top body and a bottom body… and let’s"},{"Start":"09:21.500 ","End":"09:25.623","Text":"go ahead and rename them real quick…"},{"Start":"09:25.623 ","End":"09:31.740","Text":"And we are done using this"},{"Start":"09:31.740 ","End":"09:33.559","Text":"construction plane so I’ll click on"},{"Start":"09:33.559 ","End":"09:35.439","Text":"it and simply select the keyboard"},{"Start":"09:35.440 ","End":"09:37.680","Text":"shortcut letter “V” to hide it."},{"Start":"09:39.110 ","End":"09:41.000","Text":"Before we go any further I’ll"},{"Start":"09:41.030 ","End":"09:43.699","Text":"also make sure to save this… I’ll"},{"Start":"09:43.700 ","End":"09:45.740","Text":"click the save icon and type out"},{"Start":"09:45.750 ","End":"09:47.980","Text":"“Hinged Box” and click “save.”"},{"Start":"09:50.660 ","End":"09:51.860","Text":"Now we’ll need to create"},{"Start":"09:51.860 ","End":"09:53.269","Text":"our hinge of the box."},{"Start":"09:54.070 ","End":"09:55.780","Text":"I’ll right-click on the face of the"},{"Start":"09:55.780 ","End":"09:58.390","Text":"bottom body and click “create sketch”..."},{"Start":"09:59.340 ","End":"10:01.500","Text":"then If I zoom in here, we’re"},{"Start":"10:01.500 ","End":"10:03.220","Text":"going to want to create our hinge"},{"Start":"10:03.230 ","End":"10:05.080","Text":"in the middle of the two bodies."},{"Start":"10:06.900 ","End":"10:08.850","Text":"I’m going to first hit the keyboard letter"},{"Start":"10:08.910 ","End":"10:11.219","Text":"“L” for line and I’m going to draw a line"},{"Start":"10:11.230 ","End":"10:16.780","Text":"2.95mm from the center over to the right."},{"Start":"10:18.310 ","End":"10:22.050","Text":"Then, I’ll hit letter “C” for circle"},{"Start":"10:22.599 ","End":"10:24.090","Text":"and I’m just going to click on the end"},{"Start":"10:24.090 ","End":"10:27.230","Text":"of the line and draw out 3 circles as"},{"Start":"10:27.230 ","End":"10:29.010","Text":"we’ll dimension them in just a bit..."},{"Start":"10:33.050 ","End":"10:35.270","Text":"Now I’ll hit the keyboard letter “D” for"},{"Start":"10:35.300 ","End":"10:37.410","Text":"dimension and I’ll click on the innermost"},{"Start":"10:37.410 ","End":"10:40.079","Text":"circle type the parameter “WallThickness”"},{"Start":"10:42.500 ","End":"10:44.829","Text":"Then I’ll hit letter “D” again and select"},{"Start":"10:44.830 ","End":"10:47.399","Text":"the inner circle and then the second"},{"Start":"10:47.410 ","End":"10:50.459","Text":"circle and I’m going to type “Gap”.."},{"Start":"10:50.880 ","End":"10:52.359","Text":"as this is going to create the"},{"Start":"10:52.370 ","End":"10:55.459","Text":"gap between our pin and the hinge."},{"Start":"10:56.240 ","End":"10:58.430","Text":"And finally, I’ll hit letter “D” once"},{"Start":"10:58.430 ","End":"11:00.849","Text":"again and I’ll select the second circle"},{"Start":"11:01.219 ","End":"11:03.849","Text":"and then the third circle and I’ll make"},{"Start":"11:03.849 ","End":"11:05.640","Text":"this one the parameter “WallThickness.”"},{"Start":"11:06.980 ","End":"11:08.500","Text":"and then I’ll hit the escape key"},{"Start":"11:08.530 ","End":"11:10.260","Text":"to clear the dimension command."},{"Start":"11:12.790 ","End":"11:15.050","Text":"I’ll hit “L” for line again and I’m"},{"Start":"11:15.050 ","End":"11:17.140","Text":"going to draw a line from the edge of"},{"Start":"11:17.140 ","End":"11:20.080","Text":"the bottom base to the outermost circle"},{"Start":"11:20.389 ","End":"11:22.250","Text":"and I’ll make sure that the line snaps"},{"Start":"11:22.250 ","End":"11:26.550","Text":"in where it\u0027s tangent to the circle...and"},{"Start":"11:26.550 ","End":"11:28.390","Text":"I’ll go ahead and do the same thing on"},{"Start":"11:28.390 ","End":"11:32.610","Text":"the top… Then, I’ll click the letter"},{"Start":"11:32.610 ","End":"11:35.260","Text":"“D” for dimension again and I’ll want"},{"Start":"11:35.260 ","End":"11:38.330","Text":"to add a 45-degree angle for this line"},{"Start":"11:38.330 ","End":"11:40.950","Text":"angle, as 45 degrees is kind’ve our"},{"Start":"11:40.950 ","End":"11:43.220","Text":"maximum threshold for getting a nice"},{"Start":"11:43.280 ","End":"11:46.810","Text":"angled surface in 3D printing… So I’m"},{"Start":"11:46.810 ","End":"11:48.920","Text":"just going to select both lines here"},{"Start":"11:48.980 ","End":"11:52.279","Text":"and then type in 45 degrees...and once"},{"Start":"11:52.280 ","End":"11:54.680","Text":"again, I’ll repeat the same steps for the"},{"Start":"11:54.680 ","End":"11:59.420","Text":"top...and you’ll notice that our sketch"},{"Start":"11:59.459 ","End":"12:02.380","Text":"is all black so it’s fully defined."},{"Start":"12:04.190 ","End":"12:06.610","Text":"I’ll go ahead and hit stop sketch...and"},{"Start":"12:06.610 ","End":"12:08.219","Text":"then I’ll rename this sketch in the"},{"Start":"12:08.220 ","End":"12:11.040","Text":"Fusion 360 browser by clicking on"},{"Start":"12:11.040 ","End":"12:14.170","Text":"it and typing out the word “hinge.”"},{"Start":"12:15.860 ","End":"12:18.050","Text":"Now to complete the hinge and actually"},{"Start":"12:18.090 ","End":"12:20.260","Text":"3D print the box you’ll have to click the"},{"Start":"12:20.260 ","End":"12:22.760","Text":"link to Part 2 in the video description."}],"ID":29475},{"Watched":false,"Name":"Day 19 - 3D Model a Hinged Box (Part 2 of 2)","Duration":"13m 18s","ChapterTopicVideoID":27798,"CourseChapterTopicPlaylistID":275347,"HasSubtitles":true,"ThumbnailPath":null,"UploadDate":null,"DurationForVideoObject":null,"Description":null,"MetaTitle":null,"MetaDescription":null,"Canonical":null,"VideoComments":[],"Subtitles":[{"Start":"00:00.010 ","End":"00:01.350","Text":"Kevin Kennedy: Hey there, It’s Kevin"},{"Start":"00:01.350 ","End":"00:04.480","Text":"Kennedy, and welcome back to Part 2 of"},{"Start":"00:04.480 ","End":"00:08.490","Text":"Day #19 of Learn Fusion 360 in 30 days."},{"Start":"00:09.349 ","End":"00:12.090","Text":"If you haven’t watched Part 1 then be"},{"Start":"00:12.090 ","End":"00:13.840","Text":"sure to click the link below in the"},{"Start":"00:13.840 ","End":"00:16.449","Text":"video description and watch that first."},{"Start":"00:17.070 ","End":"00:19.850","Text":"In the first video, we created our box"},{"Start":"00:19.950 ","End":"00:22.130","Text":"and created the sketch for our hinge."},{"Start":"00:22.759 ","End":"00:24.440","Text":"Let’s go ahead and turn the hinge"},{"Start":"00:24.440 ","End":"00:26.709","Text":"sketch into a 3-dimensional object."},{"Start":"00:27.849 ","End":"00:29.709","Text":"I’m going to zoom in and look at the"},{"Start":"00:29.719 ","End":"00:34.080","Text":"sketch from a slight angle… and I’m"},{"Start":"00:34.080 ","End":"00:36.199","Text":"going to hold down the shift key and"},{"Start":"00:36.200 ","End":"00:39.070","Text":"select the bottom and then the outermost"},{"Start":"00:39.070 ","End":"00:41.610","Text":"circle, and then right-click on the"},{"Start":"00:41.610 ","End":"00:43.830","Text":"selection and click on press pull."},{"Start":"00:45.349 ","End":"00:47.870","Text":"Then I’m going to change the extent"},{"Start":"00:47.980 ","End":"00:50.559","Text":"to “To Object” that way if I ever"},{"Start":"00:50.589 ","End":"00:52.809","Text":"update the size of the box the hinge"},{"Start":"00:52.809 ","End":"00:54.920","Text":"will automatically update for us."},{"Start":"00:56.530 ","End":"00:59.570","Text":"I’ll also select “extend faces” under"},{"Start":"00:59.570 ","End":"01:02.390","Text":"chain faces, and then I’ll select new"},{"Start":"01:02.390 ","End":"01:05.269","Text":"body as the operation, so we can hide"},{"Start":"01:05.269 ","End":"01:07.479","Text":"this hinge as we build the other parts."},{"Start":"01:08.820 ","End":"01:11.059","Text":"I’ll click okay and then rename this"},{"Start":"01:11.150 ","End":"01:14.460","Text":"“Bottom Hinge” in the Fusion 360 browser."},{"Start":"01:19.500 ","End":"01:21.700","Text":"Then, I’ll hide the “Bottom Hinge”"},{"Start":"01:21.719 ","End":"01:23.600","Text":"by clicking on the light bulb in the"},{"Start":"01:23.600 ","End":"01:26.690","Text":"browser and I’ll reshow the hinge sketch."},{"Start":"01:28.309 ","End":"01:30.239","Text":"This time, while holding down the"},{"Start":"01:30.240 ","End":"01:32.190","Text":"shift key, I’ll select all three"},{"Start":"01:32.190 ","End":"01:34.760","Text":"circles and then the top hinge."},{"Start":"01:36.150 ","End":"01:38.050","Text":"I’ll right-click again and select"},{"Start":"01:38.059 ","End":"01:40.390","Text":"press pull and then we’ll change"},{"Start":"01:40.400 ","End":"01:43.330","Text":"the extent to “To Object” again,"},{"Start":"01:43.330 ","End":"01:43.390","Text":"we’ll select “extend faces” for the"},{"Start":"01:43.390 ","End":"01:43.460","Text":"chain faces, and then make sure that"},{"Start":"01:43.460 ","End":"01:43.530","Text":"new body is set as the operation."},{"Start":"01:43.530 ","End":"01:43.600","Text":"After clicking okay I’ll rename this to"},{"Start":"01:43.600 ","End":"01:43.680","Text":"“Top Hinge” in the browser and then click"},{"Start":"01:43.680 ","End":"01:43.760","Text":"the light bulb icon to hide the body."},{"Start":"01:43.760 ","End":"01:43.840","Text":"Making sure that my sketch is still on"},{"Start":"01:43.840 ","End":"01:43.910","Text":"I’ll select only the inner circle and"},{"Start":"01:43.910 ","End":"01:43.990","Text":"I’ll hit letter “E” for extrude and I’ll"},{"Start":"01:43.990 ","End":"01:44.070","Text":"extrude this to the edge of the box."},{"Start":"01:44.070 ","End":"01:44.140","Text":"I’ll change the extent to “To Object”"},{"Start":"01:44.140 ","End":"01:46.590","Text":"again, we’ll select “extend faces”"},{"Start":"01:46.600 ","End":"01:49.310","Text":"for chain faces, and then make sure"},{"Start":"01:49.310 ","End":"01:52.010","Text":"that new body is set as the operation."},{"Start":"01:54.240 ","End":"01:56.390","Text":"After clicking okay I’ll rename"},{"Start":"01:56.390 ","End":"02:02.030","Text":"this to “Pin.” And I’ll go"},{"Start":"02:02.030 ","End":"02:38.299","Text":"ahead and hide the pin for now."},{"Start":"02:39.260 ","End":"02:46.180","Text":"Alrighty, so at this point, we have"},{"Start":"02:46.180 ","End":"02:49.010","Text":"the form of our box and the hinge, but"},{"Start":"02:49.010 ","End":"02:51.539","Text":"we’ll need to break up the parts of"},{"Start":"02:51.540 ","End":"02:54.210","Text":"the hinge so they interlock properly."},{"Start":"02:55.590 ","End":"02:57.870","Text":"I’ll go ahead and hide everything"},{"Start":"02:57.900 ","End":"02:59.660","Text":"except the bottom box..."},{"Start":"02:59.680 ","End":"03:04.160","Text":"and then right-click on the top"},{"Start":"03:04.160 ","End":"03:06.260","Text":"surface of the bottom body here"},{"Start":"03:06.710 ","End":"03:08.950","Text":"and I’ll select “create sketch.”"},{"Start":"03:12.200 ","End":"03:14.609","Text":"I’m going to hit letter “R” on my keyboard"},{"Start":"03:14.610 ","End":"03:17.349","Text":"for the rectangle and I’m going to draw a"},{"Start":"03:17.350 ","End":"03:20.050","Text":"rectangle starting at the center origin."},{"Start":"03:21.670 ","End":"03:24.960","Text":"I’ll make it 5.5mm long so it\u0027s"},{"Start":"03:24.960 ","End":"03:27.210","Text":"as long as our hinge, and then"},{"Start":"03:27.230 ","End":"03:28.760","Text":"for the width, I’ll type out"},{"Start":"03:28.780 ","End":"03:31.609","Text":"“WallThickness” to call that parameter."},{"Start":"03:35.090 ","End":"03:37.370","Text":"At this point, we’ll want to draw a few"},{"Start":"03:38.290 ","End":"03:40.510","Text":"rectangles for the gaps, so this hinge"},{"Start":"03:40.510 ","End":"03:42.840","Text":"will actually twist and work properly."},{"Start":"03:43.820 ","End":"03:45.710","Text":"I’ll hit letter “R” on my keyboard to"},{"Start":"03:45.710 ","End":"03:47.959","Text":"draw a rectangle right next to this one."},{"Start":"03:48.870 ","End":"03:52.719","Text":"And I’ll make it 5.5mm long, hit the tab"},{"Start":"03:52.719 ","End":"03:55.609","Text":"key to lock the dimension in, and for"},{"Start":"03:55.609 ","End":"03:57.540","Text":"this width, I’ll use the parameter “Gap.”"},{"Start":"04:02.020 ","End":"04:03.580","Text":"Now I’ll want to mirror these"},{"Start":"04:04.230 ","End":"04:06.059","Text":"rectangles in just a second, so I’ll"},{"Start":"04:06.059 ","End":"04:08.039","Text":"first need to draw a line down the"},{"Start":"04:08.049 ","End":"04:10.459","Text":"middle with letter “L” for line."},{"Start":"04:11.150 ","End":"04:13.740","Text":"And before I draw the line I’ll select"},{"Start":"04:13.810 ","End":"04:16.459","Text":"construction in the line dialogue box."},{"Start":"04:17.670 ","End":"04:19.800","Text":"Then I’ll click in the middle here"},{"Start":"04:19.990 ","End":"04:22.460","Text":"where you see the triangle or the"},{"Start":"04:22.469 ","End":"04:25.360","Text":"midpoint constraint and I’ll just drag"},{"Start":"04:25.370 ","End":"04:27.990","Text":"out to a random distance, click with"},{"Start":"04:27.990 ","End":"04:30.399","Text":"my mouse, and then hit the escape key."},{"Start":"04:33.170 ","End":"04:35.030","Text":"Now before we mirror I’ll have to"},{"Start":"04:35.030 ","End":"04:38.209","Text":"create one more gap rectangle...and I"},{"Start":"04:38.220 ","End":"04:43.950","Text":"want these hinges to be in about 3rds."},{"Start":"04:43.950 ","End":"04:46.189","Text":"I’m going to hit “L” for line again, and"},{"Start":"04:46.190 ","End":"04:48.510","Text":"I’ll draw another construction line down"},{"Start":"04:48.659 ","End":"04:53.460","Text":"11.5mm, I’ll hit tab to lock the dimension"},{"Start":"04:53.460 ","End":"04:56.099","Text":"in place, and then hit the escape key."},{"Start":"05:00.120 ","End":"05:02.309","Text":"I’ll draw another rectangle with letter"},{"Start":"05:02.340 ","End":"05:04.450","Text":"“R” and I’ll click on the endpoint"},{"Start":"05:04.520 ","End":"05:08.190","Text":"of the line and then make this 5.5mm"},{"Start":"05:08.220 ","End":"05:11.800","Text":"long, hit the tab key, and use the"},{"Start":"05:11.810 ","End":"05:13.980","Text":"“Gap” user parameter for the width."},{"Start":"05:15.760 ","End":"05:19.069","Text":"Note that I’m hitting the tab key after"},{"Start":"05:19.070 ","End":"05:21.129","Text":"typing these dimensions out, in order to"},{"Start":"05:21.130 ","End":"05:23.750","Text":"lock them in...and before I click with my"},{"Start":"05:23.750 ","End":"05:26.290","Text":"mouse to set the rectangle I’ll want to"},{"Start":"05:26.290 ","End":"05:29.100","Text":"make sure that construction is turned off."},{"Start":"05:32.070 ","End":"05:34.229","Text":"Next, I’ll select the mirror sketch"},{"Start":"05:34.230 ","End":"05:39.400","Text":"tool… I’ll click and drag over all of"},{"Start":"05:39.400 ","End":"05:41.679","Text":"the rectangles to select them...and"},{"Start":"05:41.680 ","End":"05:43.350","Text":"I’ll select the construction line"},{"Start":"05:43.370 ","End":"05:45.810","Text":"as the mirror line and click okay."},{"Start":"05:47.050 ","End":"05:49.840","Text":"And before we move on, I’ll double-check"},{"Start":"05:49.860 ","End":"05:52.719","Text":"that all of my lines are black, signifying"},{"Start":"05:52.760 ","End":"05:54.390","Text":"that they are fully constrained..."},{"Start":"05:57.589 ","End":"05:59.629","Text":"At this point I’ll hit letter “E” for"},{"Start":"05:59.629 ","End":"06:01.810","Text":"extrude, and then I’ll select all of"},{"Start":"06:01.810 ","End":"06:03.870","Text":"the gap rectangles...or all of the"},{"Start":"06:04.400 ","End":"06:06.169","Text":"rectangles here except the outer two…"},{"Start":"06:08.470 ","End":"06:11.040","Text":"Then, in the Fusion 360 browser,"},{"Start":"06:11.190 ","End":"06:13.200","Text":"I will turn on all of the bodies,"},{"Start":"06:13.240 ","End":"06:15.710","Text":"except for the pin, because we need"},{"Start":"06:15.710 ","End":"06:17.940","Text":"that to be solid all the way across."},{"Start":"06:17.940 ","End":"06:21.816","Text":"In the extrude dialogue box I’ll"},{"Start":"06:21.816 ","End":"06:25.047","Text":"change the direction to two-sides,"},{"Start":"06:25.047 ","End":"06:28.110","Text":"I’ll select “all” for the extent of"},{"Start":"06:28.120 ","End":"06:30.990","Text":"both sides...and I’ll make sure that"},{"Start":"06:31.000 ","End":"06:34.739","Text":"the operation is set to “cut.” And"},{"Start":"06:34.740 ","End":"06:36.540","Text":"the last thing I’ll check here is the"},{"Start":"06:36.600 ","End":"06:40.220","Text":"“Objects to cut”...so I’ll toggle this"},{"Start":"06:40.220 ","End":"06:41.950","Text":"open and I’ll want to make sure that"},{"Start":"06:41.950 ","End":"06:45.090","Text":"the “bottom hinge” and the “top hinge”"},{"Start":"06:45.120 ","End":"06:47.620","Text":"are selected, and I’ll click “okay.”"},{"Start":"06:49.730 ","End":"06:52.039","Text":"Now if you look in the fusion 360"},{"Start":"06:52.039 ","End":"06:53.759","Text":"browser you’ll see that we have"},{"Start":"06:53.859 ","End":"06:55.489","Text":"all kinds of different bodies"},{"Start":"06:55.510 ","End":"06:58.260","Text":"because we cut our hinge up."},{"Start":"06:59.510 ","End":"07:01.360","Text":"So we’ll have to delete a few of these"},{"Start":"07:01.410 ","End":"07:03.430","Text":"in order to get our hinge to work."},{"Start":"07:04.550 ","End":"07:05.080","Text":"I’m going to turn off the top hinge 1 \u0026 3"},{"Start":"07:05.080 ","End":"07:05.081","Text":"and then the bottom hinge 3, as those"},{"Start":"07:05.081 ","End":"07:05.082","Text":"are the pieces that we don’t need..."},{"Start":"07:05.082 ","End":"07:05.083","Text":"and we can look to see what’s"},{"Start":"07:05.083 ","End":"07:05.083","Text":"highlighted in blue to confirm that"},{"Start":"07:05.083 ","End":"07:05.084","Text":"we’re selecting the right pieces."},{"Start":"07:05.084 ","End":"07:05.085","Text":"Now I want to hold down the command key"},{"Start":"07:05.085 ","End":"07:05.086","Text":"on mac or the CONTROL key on windows"},{"Start":"07:05.086 ","End":"07:05.087","Text":"and I’ll select the top hinge 1 \u0026 3 and"},{"Start":"07:05.087 ","End":"07:05.087","Text":"then the bottom hinge 3 again...and this"},{"Start":"07:05.087 ","End":"07:05.088","Text":"time I’ll go ahead and right-click and"},{"Start":"07:05.088 ","End":"07:05.089","Text":"select “remove”… because remove will take"},{"Start":"07:05.089 ","End":"07:05.090","Text":"the features off of the browser, but it"},{"Start":"07:05.090 ","End":"07:05.090","Text":"will keep them in the timeline down here"},{"Start":"07:05.090 ","End":"07:05.091","Text":"at the bottom, so If I were to go back"},{"Start":"07:05.091 ","End":"07:05.092","Text":"through these steps I could see that in"},{"Start":"07:05.092 ","End":"07:05.093","Text":"the history… whereas, the delete will"},{"Start":"07:05.093 ","End":"07:05.094","Text":"get rid of all traces of the object."},{"Start":"07:05.094 ","End":"07:05.095","Text":"If we take a look at the hinge"},{"Start":"07:05.095 ","End":"07:05.095","Text":"you’ll notice that we deleted the"},{"Start":"07:05.095 ","End":"07:05.096","Text":"opposite parts of hinges, so each"},{"Start":"07:05.096 ","End":"07:05.097","Text":"part of the hinge actually has space"},{"Start":"07:05.097 ","End":"07:05.097","Text":"to revolve around the center pin."},{"Start":"07:05.097 ","End":"07:05.098","Text":"So at this point, we’ll want to"},{"Start":"07:05.098 ","End":"07:05.099","Text":"create a component for the top of"},{"Start":"07:05.099 ","End":"07:05.100","Text":"the box, so we can then rotate the"},{"Start":"07:05.100 ","End":"07:05.101","Text":"box around in order to 3D print this."},{"Start":"07:05.101 ","End":"07:05.101","Text":"I’ll right-click on the “top body”"},{"Start":"07:05.101 ","End":"07:05.102","Text":"and I’ll click “create components"},{"Start":"07:05.102 ","End":"07:05.102","Text":"from bodies.” Now you’ll notice that"},{"Start":"07:05.102 ","End":"07:05.103","Text":"this placed the component within"},{"Start":"07:05.103 ","End":"07:05.104","Text":"the bottom component that we started"},{"Start":"07:05.104 ","End":"07:05.104","Text":"off with, which we don’t want."},{"Start":"07:05.104 ","End":"07:05.105","Text":"So I’ll click and drag the Top"},{"Start":"07:05.105 ","End":"07:05.107","Text":"Body component to the top of the"},{"Start":"07:05.107 ","End":"07:05.108","Text":"browser tree, and you’ll see that"},{"Start":"07:05.108 ","End":"07:05.110","Text":"it is now nested as the same level"},{"Start":"07:05.110 ","End":"07:05.113","Text":"as the bottom box component….and"},{"Start":"07:05.113 ","End":"07:05.117","Text":"I’ll go ahead and rename it by"},{"Start":"07:05.117 ","End":"07:05.124","Text":"double-clicking and typing out “Top Box.”"},{"Start":"07:05.124 ","End":"07:06.440","Text":"I’m going turn off the first"},{"Start":"07:06.460 ","End":"07:08.900","Text":"and third parts of the top hinge"},{"Start":"07:09.120 ","End":"07:10.709","Text":"by going through these bodies"},{"Start":"07:10.740 ","End":"07:12.320","Text":"and seeing which ones they are."},{"Start":"07:13.640 ","End":"07:15.340","Text":"You’ll notice when I hover they"},{"Start":"07:15.340 ","End":"07:17.130","Text":"have transparency and when I"},{"Start":"07:17.160 ","End":"07:19.050","Text":"select them they turn blue."},{"Start":"07:21.090 ","End":"07:23.630","Text":"I’ll also turn off the middle"},{"Start":"07:23.639 ","End":"07:25.719","Text":"body of the bottom hinge."},{"Start":"07:27.980 ","End":"07:30.490","Text":"Then, I’ll hold down the command key"},{"Start":"07:30.530 ","End":"07:33.110","Text":"on my Mac or the Control key if you’re"},{"Start":"07:33.110 ","End":"07:35.470","Text":"using Windows and I’ll select the"},{"Start":"07:35.470 ","End":"07:39.479","Text":"bodies that we just turned off...and"},{"Start":"07:39.480 ","End":"07:41.840","Text":"I’ll right-click and select remove."},{"Start":"09:04.490 ","End":"09:06.050","Text":"And if I toggle these component"},{"Start":"09:06.050 ","End":"09:08.690","Text":"folders back to open you’ll see that"},{"Start":"09:08.880 ","End":"09:11.120","Text":"some of our top bodies are still in"},{"Start":"09:11.120 ","End":"09:13.540","Text":"the bottom component… so we can just"},{"Start":"09:13.549 ","End":"09:16.109","Text":"hold down the command key on Mac or"},{"Start":"09:16.109 ","End":"09:19.214","Text":"the control key on windows and select"},{"Start":"09:19.490 ","End":"09:21.280","Text":"all of the bodies with “top”..."},{"Start":"09:23.380 ","End":"09:25.760","Text":"and I’ll turn on the pin and select"},{"Start":"09:25.790 ","End":"09:29.499","Text":"that as well….and I’ll click and drag"},{"Start":"09:29.499 ","End":"09:32.170","Text":"them all to the “Top Box” Component."},{"Start":"09:35.740 ","End":"09:38.540","Text":"Now if we toggle each component on and"},{"Start":"09:38.540 ","End":"09:40.580","Text":"off you’ll see that we have the bodies"},{"Start":"09:40.580 ","End":"09:43.010","Text":"correctly nested under the components."},{"Start":"09:45.150 ","End":"09:47.189","Text":"At this point the last thing we’ll need to"},{"Start":"09:47.190 ","End":"09:50.200","Text":"do is add a joint so we can rotate the lid"},{"Start":"09:50.200 ","End":"09:53.899","Text":"around, so we can print the box with both"},{"Start":"09:53.940 ","End":"09:56.210","Text":"lids touching the build plate surface."},{"Start":"09:59.350 ","End":"10:01.100","Text":"I’ll go up to the assemble menu"},{"Start":"10:01.210 ","End":"10:04.009","Text":"and select “as-built joint,” which"},{"Start":"10:04.010 ","End":"10:06.140","Text":"allows us to position components"},{"Start":"10:06.469 ","End":"10:08.840","Text":"relative to one another and it"},{"Start":"10:08.900 ","End":"10:11.000","Text":"also lets us add in a motion."},{"Start":"10:13.410 ","End":"10:16.129","Text":"I’ll select both components… and you may"},{"Start":"10:16.129 ","End":"10:18.849","Text":"see the box shake rapidly because the"},{"Start":"10:18.849 ","End":"10:21.530","Text":"motion is defaulted to rigid… so we’ll"},{"Start":"10:21.530 ","End":"10:25.069","Text":"want to change that to revolute… and"},{"Start":"10:25.069 ","End":"10:26.949","Text":"then I’ll zoom in on the pin and select"},{"Start":"10:27.209 ","End":"10:29.900","Text":"the center of the pin or circle here."},{"Start":"10:35.480 ","End":"10:38.170","Text":"And if I zoom out and play the motion"},{"Start":"10:38.170 ","End":"10:40.700","Text":"again you’ll see that our box is"},{"Start":"10:40.710 ","End":"10:42.490","Text":"in fact revolving around the pin"},{"Start":"10:42.490 ","End":"10:45.790","Text":"as we wanted...so I’ll click okay."},{"Start":"10:49.090 ","End":"10:50.610","Text":"Now I’ll double click on this"},{"Start":"10:50.620 ","End":"10:52.550","Text":"revolute arrow and you’ll see that"},{"Start":"10:52.550 ","End":"10:54.560","Text":"I can open and close the lid of"},{"Start":"10:54.560 ","End":"10:58.889","Text":"the box by dragging this slider."},{"Start":"10:58.900 ","End":"11:00.660","Text":"Now you could print the box with the"},{"Start":"11:00.660 ","End":"11:03.210","Text":"lid in any direction, but to be the most"},{"Start":"11:03.210 ","End":"11:05.250","Text":"efficient and come out with the best"},{"Start":"11:05.260 ","End":"11:09.730","Text":"print we’ll want to type out 180 degrees"},{"Start":"11:09.740 ","End":"11:14.140","Text":"for the rotation, so both lids of the"},{"Start":"11:14.140 ","End":"11:17.269","Text":"box are flat to the build surface….and"},{"Start":"11:17.270 ","End":"11:19.900","Text":"I’ll click enter on my keyboard."},{"Start":"11:22.510 ","End":"11:24.469","Text":"The last thing I’ll show you here is"},{"Start":"11:24.469 ","End":"11:27.260","Text":"how to shrink this box size down so you"},{"Start":"11:27.260 ","End":"11:29.480","Text":"can 3D print the hinge without having to"},{"Start":"11:29.480 ","End":"11:32.450","Text":"wait for the entire box to print...and"},{"Start":"11:32.450 ","End":"11:34.390","Text":"this is a good idea when coming up with"},{"Start":"11:34.410 ","End":"11:37.640","Text":"new objects so we can test functionality"},{"Start":"11:37.809 ","End":"11:40.540","Text":"without wasting time and filament."},{"Start":"11:42.590 ","End":"11:44.439","Text":"I’ll double click on the original box"},{"Start":"11:44.450 ","End":"11:52.000","Text":"sketch in the browser… I can change"},{"Start":"11:52.030 ","End":"11:55.740","Text":"the length of the box to 10mm, then"},{"Start":"11:55.740 ","End":"11:59.570","Text":"hit stop sketch… and we can change the"},{"Start":"11:59.570 ","End":"12:02.579","Text":"height by editing our user parameters."},{"Start":"12:04.390 ","End":"12:06.830","Text":"So if you remember...we’ll have to go up"},{"Start":"12:07.000 ","End":"12:09.790","Text":"the modify menu and then select “change"},{"Start":"12:09.800 ","End":"12:12.550","Text":"parameters” and I’ll change the box"},{"Start":"12:12.550 ","End":"12:16.059","Text":"height value to 20mm and click okay."},{"Start":"12:18.820 ","End":"12:20.670","Text":"Now if I zoom in you’ll see that our"},{"Start":"12:20.670 ","End":"12:22.910","Text":"hinge size actually didn’t change"},{"Start":"12:22.940 ","End":"12:24.890","Text":"one bit, which is what we want."},{"Start":"12:25.630 ","End":"12:28.020","Text":"So again, we’ve shrunk our out box size"},{"Start":"12:28.030 ","End":"12:31.010","Text":"so this will print much faster and we"},{"Start":"12:31.010 ","End":"12:34.209","Text":"can test out the hinge...and then if"},{"Start":"12:34.260 ","End":"12:36.709","Text":"the hinge does print correctly we can"},{"Start":"12:37.010 ","End":"12:39.250","Text":"go back and change our parameters to"},{"Start":"12:39.250 ","End":"12:41.820","Text":"make the box whatever size that we want."},{"Start":"12:44.630 ","End":"12:47.479","Text":"Lastly, to 3D print this box, I can"},{"Start":"12:47.480 ","End":"12:49.829","Text":"right-click on the top-level assembly"},{"Start":"12:50.040 ","End":"12:53.610","Text":"and click “Save as STL” and in the"},{"Start":"12:53.610 ","End":"12:55.950","Text":"“SAVE AS STL” dialogue box I will"},{"Start":"12:55.970 ","End":"12:58.329","Text":"make sure the refinement is set to"},{"Start":"12:58.400 ","End":"13:01.790","Text":"high, and then I can either output to"},{"Start":"13:01.790 ","End":"13:05.360","Text":"a specific slicing software OR I can"},{"Start":"13:07.870 ","End":"13:09.115","Text":"unselect this, click okay and save"},{"Start":"13:09.115 ","End":"13:13.520","Text":"this .STL file to my local hard drive."}],"ID":29002},{"Watched":false,"Name":"Day 20 - 3D Model a One-Part Mold","Duration":"10m 52s","ChapterTopicVideoID":27799,"CourseChapterTopicPlaylistID":275347,"HasSubtitles":true,"ThumbnailPath":null,"UploadDate":null,"DurationForVideoObject":null,"Description":null,"MetaTitle":null,"MetaDescription":null,"Canonical":null,"VideoComments":[],"Subtitles":[{"Start":"00:00.090 ","End":"00:00.990","Text":"Kevin Kennedy: Hey there, It’s"},{"Start":"00:01.020 ","End":"00:03.280","Text":"Kevin Kennedy, and welcome to Day"},{"Start":"00:03.280 ","End":"00:07.060","Text":"#20 of Learn Fusion 360 in 30 days."},{"Start":"00:07.900 ","End":"00:09.799","Text":"By the end of this tutorial,"},{"Start":"00:09.880 ","End":"00:12.330","Text":"you’ll be able to 3D model a simple"},{"Start":"00:12.349 ","End":"00:14.639","Text":"one-part mold for 3D printing."},{"Start":"00:15.679 ","End":"00:16.660","Text":"We’ll take a look at how to"},{"Start":"00:16.660 ","End":"00:18.560","Text":"use the combine feature to"},{"Start":"00:18.560 ","End":"00:20.850","Text":"subtract one body from another."},{"Start":"00:21.500 ","End":"00:22.147","Text":"Also, stay tuned for Day #21 where"},{"Start":"00:22.147 ","End":"00:22.303","Text":"we’ll take a look at how to create"},{"Start":"00:22.303 ","End":"00:22.400","Text":"a more complex two-part mold."},{"Start":"00:22.420 ","End":"00:24.550","Text":"To get started I’m just going to 3D"},{"Start":"00:24.550 ","End":"00:27.000","Text":"model a simple keychain, and we’ll make"},{"Start":"00:27.000 ","End":"00:28.840","Text":"a one-part mold from it that you can"},{"Start":"00:28.840 ","End":"00:31.340","Text":"3D print...which can come in handy if"},{"Start":"00:31.349 ","End":"00:33.519","Text":"you want to make resin replicas for"},{"Start":"00:33.519 ","End":"00:36.030","Text":"faster and smoother reproductions."},{"Start":"00:37.469 ","End":"00:37.521","Text":"Be sure to check out the links"},{"Start":"00:37.521 ","End":"00:37.552","Text":"in the video description with my"},{"Start":"00:37.552 ","End":"00:37.578","Text":"favorite mold release and resins"},{"Start":"00:37.578 ","End":"00:37.609","Text":"when working with 3d printed molds."},{"Start":"00:37.609 ","End":"00:39.490","Text":"I’ll select new component from the"},{"Start":"00:39.490 ","End":"00:42.010","Text":"assemble dropdown list, and rename"},{"Start":"00:42.010 ","End":"00:44.419","Text":"it “keychain” before clicking okay."},{"Start":"00:46.280 ","End":"00:48.529","Text":"Then, I’ll select box from the"},{"Start":"00:48.530 ","End":"00:51.139","Text":"create dropdown menu… I’m going"},{"Start":"00:51.139 ","End":"00:53.730","Text":"to select the top plane, and then"},{"Start":"00:53.730 ","End":"00:56.150","Text":"click on the top of the viewcube"},{"Start":"00:56.510 ","End":"00:59.099","Text":"to look directly at the top plane."},{"Start":"00:59.320 ","End":"01:01.060","Text":"Then, I’ll click on the center"},{"Start":"01:01.060 ","End":"01:03.540","Text":"origin and drag out with my mouse."},{"Start":"01:04.879 ","End":"01:08.120","Text":"I’ll type in 50mm for the length, hit"},{"Start":"01:08.120 ","End":"01:09.940","Text":"the tab key to lock the dimension in"},{"Start":"01:09.940 ","End":"01:13.500","Text":"place, and then 35mm for the width,"},{"Start":"01:14.020 ","End":"01:17.369","Text":"also followed by the tab key… and then I"},{"Start":"01:17.370 ","End":"01:19.810","Text":"will click with my mouse to set the box."},{"Start":"01:22.180 ","End":"01:24.200","Text":"Then, because we used the box feature,"},{"Start":"01:24.250 ","End":"01:26.550","Text":"it saved us that extra step of having"},{"Start":"01:26.550 ","End":"01:29.479","Text":"to hit extrude...and we can simply"},{"Start":"01:29.500 ","End":"01:32.530","Text":"enter the height of 3mm and click okay."},{"Start":"01:34.760 ","End":"01:36.149","Text":"Now I’m going to round the"},{"Start":"01:36.150 ","End":"01:37.890","Text":"edges over using the keyboard"},{"Start":"01:37.890 ","End":"01:39.909","Text":"shortcut letter “F” for fillet."},{"Start":"01:40.809 ","End":"01:42.670","Text":"I’ll select all 4 sides..."},{"Start":"01:46.209 ","End":"01:48.770","Text":"and then I will type out 7mm"},{"Start":"01:48.799 ","End":"01:50.710","Text":"for the distance and click okay."},{"Start":"01:54.210 ","End":"01:55.670","Text":"At this point let’s go ahead"},{"Start":"01:55.690 ","End":"01:56.700","Text":"and add a hole for our keychain."},{"Start":"01:58.230 ","End":"02:00.469","Text":"I’ll hit the keyboard letter ”L” for"},{"Start":"02:00.469 ","End":"02:02.850","Text":"line, and I’m going to click on the"},{"Start":"02:02.850 ","End":"02:05.485","Text":"top of the keychain, and then for the"},{"Start":"02:05.600 ","End":"02:07.800","Text":"first point of the line I’ll select the"},{"Start":"02:07.810 ","End":"02:10.460","Text":"midpoint at the top, where you see the"},{"Start":"02:10.470 ","End":"02:13.200","Text":"triangle or midpoint constraint pop up."},{"Start":"02:15.020 ","End":"02:18.380","Text":"Then, I’ll type out 5mm, hit the tab"},{"Start":"02:18.380 ","End":"02:22.399","Text":"key to lock the dimension in place, and"},{"Start":"02:22.400 ","End":"02:24.660","Text":"click with my mouse to place the line."},{"Start":"02:26.540 ","End":"02:28.700","Text":"Now that we have an endpoint for where we"},{"Start":"02:28.700 ","End":"02:30.930","Text":"want the hole to go I’ll hit the keyboard"},{"Start":"02:30.930 ","End":"02:33.520","Text":"shortcut letter “H” for hole and I’ll"},{"Start":"02:33.520 ","End":"02:35.790","Text":"click on the top plane of the keychain."},{"Start":"02:37.620 ","End":"02:39.440","Text":"To get the hole to snap to our line’s"},{"Start":"02:39.460 ","End":"02:41.829","Text":"endpoint we’ll have to click reference in"},{"Start":"02:41.829 ","End":"02:45.150","Text":"the hole dialogue box, and then select the"},{"Start":"02:45.400 ","End":"02:47.450","Text":"endpoint of the line, and you’ll notice"},{"Start":"02:47.450 ","End":"02:49.850","Text":"that it immediately snaps into place."},{"Start":"02:52.260 ","End":"02:54.000","Text":"We can also change the hole"},{"Start":"02:54.009 ","End":"02:56.140","Text":"settings in the Hole dialogue box."},{"Start":"02:56.950 ","End":"03:00.640","Text":"I’ll select simple, simple, and"},{"Start":"03:00.650 ","End":"03:02.330","Text":"flat because we just need a hole"},{"Start":"03:02.590 ","End":"03:04.359","Text":"to go through for our keyring."},{"Start":"03:06.400 ","End":"03:08.019","Text":"I’ll change the depth of the hole"},{"Start":"03:08.020 ","End":"03:10.520","Text":"to 3mm, or the thickness of our"},{"Start":"03:10.520 ","End":"03:12.619","Text":"keychain, and then I’ll change"},{"Start":"03:12.639 ","End":"03:15.680","Text":"the width to 5mm and click okay."},{"Start":"03:17.840 ","End":"03:20.860","Text":"If you’re making your own keychain"},{"Start":"03:20.880 ","End":"03:23.180","Text":"you can customize it at this point by"},{"Start":"03:23.200 ","End":"03:26.380","Text":"either adding some text, or an SVG logo."},{"Start":"03:27.340 ","End":"03:28.930","Text":"I’m going to head up to the insert"},{"Start":"03:28.930 ","End":"03:32.269","Text":"menu and select “insert SVG” and"},{"Start":"03:32.269 ","End":"03:34.200","Text":"I’ll select the face of the keychain."},{"Start":"03:36.299 ","End":"03:39.329","Text":"Then in the SVG dialogue box, I’ll click"},{"Start":"03:39.330 ","End":"03:41.429","Text":"on the open folder and I’m going to"},{"Start":"03:41.430 ","End":"03:44.320","Text":"select the Product Design Online logo."},{"Start":"03:47.870 ","End":"03:50.551","Text":"You’ll see that its way to big and off"},{"Start":"03:50.551 ","End":"03:53.139","Text":"the keychain so I’m just going to use"},{"Start":"03:53.139 ","End":"03:55.940","Text":"these sliders to resize and reposition"},{"Start":"03:55.940 ","End":"03:57.980","Text":"the logo until I’m happy with it…"},{"Start":"04:01.090 ","End":"04:02.969","Text":"I want to add some thickness to the"},{"Start":"04:02.970 ","End":"04:05.109","Text":"logo…so I’m just going to right-click"},{"Start":"04:05.130 ","End":"04:07.320","Text":"and select press pull and I’ll"},{"Start":"04:07.320 ","End":"04:10.320","Text":"make this first section 1mm thick."},{"Start":"04:13.260 ","End":"04:15.910","Text":"Then, I’ll repeat these steps to the other"},{"Start":"04:15.910 ","End":"04:18.990","Text":"two parts of the logo...making sure that"},{"Start":"04:19.070 ","End":"04:22.219","Text":"all of the operations are set to join so"},{"Start":"04:22.219 ","End":"04:24.650","Text":"we have just one body for the keychain"},{"Start":"04:24.650 ","End":"04:29.210","Text":"Alrighty, so now we have a fairly"},{"Start":"04:29.210 ","End":"04:30.479","Text":"simple keychain that we can"},{"Start":"04:30.480 ","End":"04:32.390","Text":"create a one-part mold out of."},{"Start":"04:32.640 ","End":"04:34.590","Text":"I’ll just toggle open the keychain"},{"Start":"04:34.590 ","End":"04:37.020","Text":"component, and I’ll go ahead and rename"},{"Start":"04:37.020 ","End":"04:40.120","Text":"the body to keychain by double-clicking"},{"Start":"04:40.120 ","End":"04:42.180","Text":"on it and typing out “keychain.”"},{"Start":"04:45.110 ","End":"04:47.019","Text":"Now to create our mold we’ll need to"},{"Start":"04:47.020 ","End":"04:49.260","Text":"create another box, and then we’ll"},{"Start":"04:49.330 ","End":"04:51.830","Text":"use the keychain OR if you would"},{"Start":"04:51.830 ","End":"04:54.070","Text":"like to replicate something else"},{"Start":"04:54.230 ","End":"04:55.490","Text":"then you’ll have to make sure that"},{"Start":"04:55.490 ","End":"04:59.009","Text":"you have a body for this to work."},{"Start":"05:00.550 ","End":"05:02.989","Text":"So if you’ve imported an .stl file"},{"Start":"05:03.009 ","End":"05:04.760","Text":"from Thingiverse then you’ll need to"},{"Start":"05:04.760 ","End":"05:06.616","Text":"convert that from a mesh to BRep...and"},{"Start":"05:06.616 ","End":"05:07.295","Text":"if you need help with that conversion"},{"Start":"05:07.295 ","End":"05:07.974","Text":"you can watch my other video which"},{"Start":"05:07.974 ","End":"05:08.653","Text":"I’ll link to in the description below."},{"Start":"05:08.750 ","End":"05:11.479","Text":"I’ll now select box once again"},{"Start":"05:11.510 ","End":"05:13.190","Text":"from the create dropdown menu,"},{"Start":"05:13.320 ","End":"05:15.330","Text":"and I’ll click on the XY plane."},{"Start":"05:16.700 ","End":"05:19.260","Text":"I’ll select in the upper left-hand"},{"Start":"05:19.260 ","End":"05:21.859","Text":"corner and then I just want this to be"},{"Start":"05:21.860 ","End":"05:23.859","Text":"big enough to encompass the keychain,"},{"Start":"05:24.279 ","End":"05:26.250","Text":"or whatever model you are using here..."},{"Start":"05:27.980 ","End":"05:29.970","Text":"I’ll type in 60mm for the"},{"Start":"05:29.970 ","End":"05:33.120","Text":"length and 45mm for the width"},{"Start":"05:35.110 ","End":"05:36.560","Text":"and I’ll click with my mouse."},{"Start":"05:39.000 ","End":"05:41.189","Text":"In the “Box” dialogue box I’ll make"},{"Start":"05:41.190 ","End":"05:43.490","Text":"sure the operation is set to “new"},{"Start":"05:43.490 ","End":"05:45.570","Text":"body” and then I will go ahead and"},{"Start":"05:45.570 ","End":"05:47.180","Text":"look at this box from the front… as"},{"Start":"05:47.510 ","End":"05:51.249","Text":"I’ll want to make sure the height"},{"Start":"05:51.280 ","End":"05:54.630","Text":"goes overtop the entire keychain….and"},{"Start":"05:54.630 ","End":"05:57.230","Text":"I’m just going to type out 8mm, which"},{"Start":"05:57.240 ","End":"05:59.899","Text":"should be plenty, and I’ll click okay."},{"Start":"06:02.179 ","End":"06:04.700","Text":"Then, before doing anything else"},{"Start":"06:04.750 ","End":"06:06.440","Text":"I’ll rename the body that we just"},{"Start":"06:06.440 ","End":"06:08.150","Text":"created by double-clicking on"},{"Start":"06:08.150 ","End":"06:10.140","Text":"it in the Fusion 360 browser..."},{"Start":"06:11.250 ","End":"06:13.510","Text":"and I’ll type out “Mold” for the name."},{"Start":"06:15.320 ","End":"06:17.819","Text":"I’ll go ahead and click the save icon at"},{"Start":"06:17.820 ","End":"06:20.479","Text":"the top and type out “One Part Keychain"},{"Start":"06:20.480 ","End":"06:22.997","Text":"Mold” and then click the save button, to"},{"Start":"06:23.150 ","End":"06:25.810","Text":"save the model before I go any further."},{"Start":"06:27.920 ","End":"06:30.059","Text":"At this point our keychain and mold"},{"Start":"06:30.059 ","End":"06:31.850","Text":"for the box are taking up the same"},{"Start":"06:31.850 ","End":"06:34.110","Text":"space...so to help us see what we’re"},{"Start":"06:34.110 ","End":"06:35.940","Text":"doing here I’ll first activate the"},{"Start":"06:35.969 ","End":"06:38.460","Text":"top-level component by right-clicking"},{"Start":"06:38.460 ","End":"06:40.350","Text":"on it and selecting activate."},{"Start":"06:42.550 ","End":"06:44.690","Text":"Then, I’ll right-click on the “Mold”"},{"Start":"06:44.700 ","End":"06:47.630","Text":"body…I’ll find “Opacity Control”"},{"Start":"06:48.070 ","End":"06:50.320","Text":"and I’ll change this to 50%..."},{"Start":"06:51.030 ","End":"06:53.510","Text":"and you’ll see this opacity control"},{"Start":"06:53.539 ","End":"06:55.200","Text":"will help us better see what we’re"},{"Start":"06:55.200 ","End":"06:57.289","Text":"doing as we cut this keychain out."},{"Start":"07:02.300 ","End":"07:03.939","Text":"I’ll select the combine tool"},{"Start":"07:03.940 ","End":"07:05.839","Text":"from the modify dropdown list."},{"Start":"07:06.840 ","End":"07:09.020","Text":"First, you’ll need to select the “Target"},{"Start":"07:09.040 ","End":"07:11.169","Text":"Body,” which is going to be the object"},{"Start":"07:11.170 ","End":"07:14.270","Text":"that you want to cut away from OR add to."},{"Start":"07:15.230 ","End":"07:17.599","Text":"So we’ll need to select our “Mold” body."},{"Start":"07:19.380 ","End":"07:21.310","Text":"Then for the tool body, we’ll need"},{"Start":"07:21.310 ","End":"07:23.499","Text":"to select the keychain or whatever"},{"Start":"07:23.500 ","End":"07:25.359","Text":"body that you are cutting away"},{"Start":"07:25.460 ","End":"07:27.399","Text":"in order to make a one part mold."},{"Start":"07:28.820 ","End":"07:30.550","Text":"And if you’re having trouble selecting"},{"Start":"07:30.550 ","End":"07:33.210","Text":"the body in the graphics window, remember"},{"Start":"07:33.210 ","End":"07:35.280","Text":"that you can always select the body in the"},{"Start":"07:35.280 ","End":"07:38.280","Text":"Fusion 360 browser on the left-hand side."},{"Start":"07:40.830 ","End":"07:42.840","Text":"We’ll then have to change the operation"},{"Start":"07:42.840 ","End":"07:44.909","Text":"to “cut” because we want our “Tool"},{"Start":"07:44.910 ","End":"07:46.470","Text":"Body,” or the keychain in this case,"},{"Start":"07:46.490 ","End":"07:49.820","Text":"to cut out the material of our box."},{"Start":"07:51.940 ","End":"07:53.800","Text":"I can select “New Component” If I"},{"Start":"07:53.800 ","End":"07:55.609","Text":"want the mold to be added to a new"},{"Start":"07:55.610 ","End":"07:58.059","Text":"component...and I can select “Keep"},{"Start":"07:58.070 ","End":"08:01.399","Text":"Tools” which will keep the body or bodies"},{"Start":"08:01.469 ","End":"08:03.070","Text":"that you had selected for the “Tool"},{"Start":"08:03.070 ","End":"08:05.240","Text":"Bodies” should you need to reference"},{"Start":"08:05.240 ","End":"08:07.500","Text":"them or use them again in this file."},{"Start":"08:10.060 ","End":"08:12.090","Text":"After clicking okay we’ll have to turn"},{"Start":"08:12.190 ","End":"08:14.250","Text":"off the original bodies by selecting"},{"Start":"08:14.260 ","End":"08:17.219","Text":"the lightbulb in the browser...and"},{"Start":"08:17.219 ","End":"08:19.090","Text":"then I will also go ahead and turn"},{"Start":"08:19.090 ","End":"08:21.609","Text":"the opacity back to 100% so it’s"},{"Start":"08:21.820 ","End":"08:23.769","Text":"easier to take a look at the mold."},{"Start":"08:25.849 ","End":"08:27.800","Text":"Now that we have our one-part mold"},{"Start":"08:27.840 ","End":"08:30.110","Text":"we can look at the draft analysis"},{"Start":"08:30.150 ","End":"08:31.890","Text":"to see how well the object is"},{"Start":"08:31.890 ","End":"08:33.799","Text":"expected to pop out of the mold."},{"Start":"08:34.659 ","End":"08:36.429","Text":"I’ll select “draft analysis”"},{"Start":"08:36.440 ","End":"08:38.289","Text":"from the inspect dropdown list."},{"Start":"08:39.330 ","End":"08:43.299","Text":"Then, I’ll select the mold...and"},{"Start":"08:43.299 ","End":"08:45.590","Text":"we have to also select an axis or"},{"Start":"08:45.590 ","End":"08:47.330","Text":"face for the direction that the"},{"Start":"08:47.330 ","End":"08:51.610","Text":"item will pop out, so I’ll select"},{"Start":"08:51.610 ","End":"08:54.070","Text":"the top face of the hole knockout."},{"Start":"08:55.820 ","End":"08:58.020","Text":"It’s also important to note, that before"},{"Start":"08:58.020 ","End":"09:00.969","Text":"you click okay you can also set tolerances"},{"Start":"09:01.110 ","End":"09:03.290","Text":"in the bottom section of the dialogue box."},{"Start":"09:04.449 ","End":"09:05.650","Text":"I’ll just leave these to"},{"Start":"09:05.670 ","End":"09:07.449","Text":"the defaults and click okay."},{"Start":"09:09.290 ","End":"09:11.460","Text":"Then, you’ll see that the draft analysis"},{"Start":"09:11.480 ","End":"09:14.220","Text":"will color-code everything...and we have"},{"Start":"09:14.220 ","End":"09:16.549","Text":"the red edges here where the object may"},{"Start":"09:16.559 ","End":"09:18.220","Text":"have trouble coming out of the mold."},{"Start":"09:19.850 ","End":"09:21.660","Text":"So what we can do to fix this"},{"Start":"09:21.680 ","End":"09:23.520","Text":"is go up to the modify dropdown"},{"Start":"09:23.520 ","End":"09:25.400","Text":"menu and then select draft."},{"Start":"09:25.400 ","End":"09:30.350","Text":"To apply a draft angle to our"},{"Start":"09:30.610 ","End":"09:33.419","Text":"model I’ll select the top of the"},{"Start":"09:33.420 ","End":"09:35.719","Text":"mold as the plane and then the"},{"Start":"09:35.740 ","End":"09:37.840","Text":"inside faces here that are red."},{"Start":"09:38.620 ","End":"09:40.590","Text":"Then I can simply drag this slider"},{"Start":"09:40.810 ","End":"09:43.080","Text":"around until we get the minimum degree"},{"Start":"09:43.110 ","End":"09:45.290","Text":"that turns the analysis to green."},{"Start":"09:46.730 ","End":"09:48.850","Text":"I can click okay… and I can repeat"},{"Start":"09:48.860 ","End":"09:51.000","Text":"these steps for the keychain knockout by"},{"Start":"09:51.000 ","End":"09:53.560","Text":"right-clicking and selecting repeat draft."},{"Start":"09:54.109 ","End":"09:56.530","Text":"And again, I’ll select the top as"},{"Start":"09:56.530 ","End":"09:59.590","Text":"the plane and the side faces and then"},{"Start":"09:59.590 ","End":"10:02.020","Text":"make this 5 degrees and click okay."},{"Start":"10:03.990 ","End":"10:05.840","Text":"It’s kind’ve hard to see the draft"},{"Start":"10:05.840 ","End":"10:07.889","Text":"angle here so If I look at the section"},{"Start":"10:07.940 ","End":"10:10.209","Text":"analysis from the side you’ll see that"},{"Start":"10:10.209 ","End":"10:12.660","Text":"we did end up creating this nice draft"},{"Start":"10:12.660 ","End":"10:19.520","Text":"angle to help our mold pop out easier."},{"Start":"10:22.670 ","End":"10:24.180","Text":"And one other thing I’ll point"},{"Start":"10:24.180 ","End":"10:26.190","Text":"out… when you turn on the draft"},{"Start":"10:26.190 ","End":"10:28.500","Text":"analysis you will see it adds the"},{"Start":"10:28.500 ","End":"10:30.570","Text":"analysis folder to the browser"},{"Start":"10:30.820 ","End":"10:32.699","Text":"where you can toggle it on and off."}],"ID":29003},{"Watched":false,"Name":"Day 21 - 3D Model a Two-Part Mold","Duration":"11m 49s","ChapterTopicVideoID":27800,"CourseChapterTopicPlaylistID":275347,"HasSubtitles":true,"ThumbnailPath":null,"UploadDate":null,"DurationForVideoObject":null,"Description":null,"MetaTitle":null,"MetaDescription":null,"Canonical":null,"VideoComments":[],"Subtitles":[{"Start":"00:00.150 ","End":"00:00.970","Text":"Kevin Kennedy: Hey there, It’s"},{"Start":"00:00.970 ","End":"00:03.260","Text":"Kevin Kennedy, and welcome to Day"},{"Start":"00:03.260 ","End":"00:07.060","Text":"#21 of Learn Fusion 360 in 30 days."},{"Start":"00:08.020 ","End":"00:10.180","Text":"By the end of this tutorial, you’ll"},{"Start":"00:10.180 ","End":"00:12.410","Text":"be able to 3D model a two-part"},{"Start":"00:12.410 ","End":"00:14.220","Text":"mold that you can 3D print."},{"Start":"00:15.080 ","End":"00:16.419","Text":"We’ll take a look at how to use the"},{"Start":"00:16.420 ","End":"00:19.510","Text":"combine tool to subtract a body, how"},{"Start":"00:19.510 ","End":"00:22.320","Text":"to split a body in half, and how to"},{"Start":"00:22.320 ","End":"00:25.000","Text":"create registration pins for the mold."},{"Start":"00:25.540 ","End":"00:27.470","Text":"To get started I’m going to open"},{"Start":"00:27.470 ","End":"00:29.460","Text":"up this donut file, which I’ll"},{"Start":"00:29.460 ","End":"00:31.630","Text":"create a mold of in this video."},{"Start":"00:32.500 ","End":"00:35.259","Text":"If you remember in Day #20 we created"},{"Start":"00:35.299 ","End":"00:38.140","Text":"a one-part mold, so in this demo, we’ll"},{"Start":"00:38.140 ","End":"00:40.339","Text":"take a look at how to create a multi-part"},{"Start":"00:40.340 ","End":"00:42.589","Text":"mold when the 3-Dimensional object"},{"Start":"00:42.620 ","End":"00:45.020","Text":"is too complex for a one-part mold."},{"Start":"00:47.570 ","End":"00:49.680","Text":"Before I do anything with the model"},{"Start":"00:49.680 ","End":"00:51.489","Text":"I’ll want to right-click on the master"},{"Start":"00:51.490 ","End":"00:54.300","Text":"component and select “Capture Design"},{"Start":"00:54.300 ","End":"00:56.440","Text":"History” to ensure that our process"},{"Start":"00:56.460 ","End":"00:58.600","Text":"is captured in the timeline below."},{"Start":"01:01.630 ","End":"01:04.069","Text":"Similar to the one-part mold, the first"},{"Start":"01:04.069 ","End":"01:06.460","Text":"thing we’ll want to do is create a box"},{"Start":"01:06.490 ","End":"01:08.860","Text":"that will encompass the entire object."},{"Start":"01:09.610 ","End":"01:11.770","Text":"I’ll hit the keyboard shortcut letter “R”"},{"Start":"01:11.779 ","End":"01:15.290","Text":"for rectangle, I’ll select the XZ plane…"},{"Start":"01:16.150 ","End":"01:18.360","Text":"and before I select the center origin"},{"Start":"01:18.600 ","End":"01:20.559","Text":"I’ll select “center-rectangle” in the"},{"Start":"01:20.570 ","End":"01:24.100","Text":"sketch palette… I’ll select the center"},{"Start":"01:24.100 ","End":"01:27.460","Text":"origin… and I’m just going to make this"},{"Start":"01:27.730 ","End":"01:31.500","Text":"110mm in each direction and hit enter."},{"Start":"01:34.190 ","End":"01:36.420","Text":"Now I’ll hit the keyboard letter “E” for"},{"Start":"01:36.420 ","End":"01:38.640","Text":"extrude and I’ll select the rectangle."},{"Start":"01:39.719 ","End":"01:41.830","Text":"Again, we want this box to cover the"},{"Start":"01:41.830 ","End":"01:44.080","Text":"entire donut, so I’ll first select"},{"Start":"01:44.110 ","End":"01:48.589","Text":"“two-sides” for the direction, and I’ll"},{"Start":"01:48.590 ","End":"01:51.200","Text":"drag the arrows for each direction, or"},{"Start":"01:51.200 ","End":"01:55.700","Text":"about 20mm, until the box covers the"},{"Start":"01:55.700 ","End":"01:58.470","Text":"donut shape… and you’ll notice that it"},{"Start":"01:58.480 ","End":"02:01.780","Text":"defaulted to the cut operation, so we’ll"},{"Start":"02:01.780 ","End":"02:03.770","Text":"want to make sure that we have “new body”"},{"Start":"02:03.780 ","End":"02:06.409","Text":"set as the operation before we click okay."},{"Start":"02:06.419 ","End":"02:12.010","Text":"At this point, I’ll want to start naming"},{"Start":"02:12.030 ","End":"02:14.090","Text":"bodies so it’s easy to keep track of."},{"Start":"02:15.550 ","End":"02:17.700","Text":"I’ll toggle open the bodies folder"},{"Start":"02:17.790 ","End":"02:20.239","Text":"and rename the first body “donut”"},{"Start":"02:20.710 ","End":"02:23.160","Text":"and the second body “Mold Box.”"},{"Start":"02:27.680 ","End":"02:29.680","Text":"To help us see what’s going on we can"},{"Start":"02:30.310 ","End":"02:32.870","Text":"change the opacity of the Mold Box body."},{"Start":"02:33.420 ","End":"02:35.000","Text":"To do this simply right-click on"},{"Start":"02:35.000 ","End":"02:37.650","Text":"the body, go to opacity control,"},{"Start":"02:38.179 ","End":"02:40.619","Text":"and change the opacity to 50%."},{"Start":"02:42.400 ","End":"02:44.400","Text":"Now we’ll want to use the combine tool"},{"Start":"02:44.420 ","End":"02:47.320","Text":"to subtract the donut shape from the box."},{"Start":"02:47.940 ","End":"02:49.920","Text":"I’ll select combine from the modify"},{"Start":"02:49.930 ","End":"02:52.380","Text":"dropdown list, and then I’ll select the"},{"Start":"02:52.380 ","End":"02:55.509","Text":"mold box as the target body, as this is"},{"Start":"02:55.509 ","End":"02:57.429","Text":"the object that we want to cut away from."},{"Start":"02:58.770 ","End":"03:00.810","Text":"For the tool bodies, or the shape that"},{"Start":"03:00.810 ","End":"03:03.150","Text":"we’ll use to cut, I’ll select the donut,"},{"Start":"03:04.050 ","End":"03:05.730","Text":"I’ll double-check that the operation"},{"Start":"03:05.770 ","End":"03:08.400","Text":"is set to “cut” and I’ll also make"},{"Start":"03:08.400 ","End":"03:10.340","Text":"sure that “new component” and “keep"},{"Start":"03:10.340 ","End":"03:12.680","Text":"tools” is selected...and I’ll click"},{"Start":"03:12.680 ","End":"03:15.079","Text":"okay in the combine dialogue box."},{"Start":"03:19.059 ","End":"03:20.580","Text":"Since we had “new component”"},{"Start":"03:20.600 ","End":"03:22.050","Text":"selected you’ll see that our mold"},{"Start":"03:22.050 ","End":"03:22.916","Text":"body that we want to keep was"},{"Start":"03:22.990 ","End":"03:26.510","Text":"created within a new component."},{"Start":"03:27.400 ","End":"03:29.570","Text":"I’ll go ahead and rename this component"},{"Start":"03:30.150 ","End":"03:32.910","Text":"“Donut Mold” by double-clicking on it…"},{"Start":"03:33.719 ","End":"03:36.159","Text":"and I’ll turn off the original two bodies."},{"Start":"03:38.509 ","End":"03:39.700","Text":"At this point, we’ll want to"},{"Start":"03:39.700 ","End":"03:41.750","Text":"cut this mold into two parts."},{"Start":"03:42.590 ","End":"03:44.410","Text":"Before we split the body I’ll need"},{"Start":"03:44.420 ","End":"03:45.900","Text":"to add a construction plane to"},{"Start":"03:45.900 ","End":"03:47.820","Text":"reference as the split feature."},{"Start":"03:48.799 ","End":"03:51.059","Text":"I’ll select “midplane” from the construct"},{"Start":"03:51.059 ","End":"03:53.950","Text":"dropdown menu, and then select the top…"},{"Start":"03:54.969 ","End":"03:58.450","Text":"and the bottom of the box, and click okay."},{"Start":"03:59.320 ","End":"04:00.630","Text":"And you’ll see that midplane"},{"Start":"04:00.630 ","End":"04:02.489","Text":"created a construction plane"},{"Start":"04:02.500 ","End":"04:04.790","Text":"directly in the middle of our box."},{"Start":"04:07.530 ","End":"04:09.959","Text":"I’ll select “Split Body” from the modify"},{"Start":"04:09.969 ","End":"04:12.369","Text":"dropdown list, and then I’ll select the"},{"Start":"04:12.370 ","End":"04:15.310","Text":"Mold Box as the Body to Split and I’ll"},{"Start":"04:15.310 ","End":"04:17.070","Text":"select the construction plane as the"},{"Start":"04:17.070 ","End":"04:19.660","Text":"splitting tool, and I’ll click okay."},{"Start":"04:24.000 ","End":"04:26.550","Text":"Now to make this easier to look at I’ll"},{"Start":"04:26.550 ","End":"04:28.329","Text":"select the construction plane and hit the"},{"Start":"04:28.330 ","End":"04:30.750","Text":"keyboard shortcut letter “V” to hide it."},{"Start":"04:34.270 ","End":"04:36.600","Text":"I can also turn the opacity back to 100%"},{"Start":"04:37.460 ","End":"04:40.270","Text":"of both bodies, to make them easier to"},{"Start":"04:40.270 ","End":"04:43.300","Text":"look at...and I’ll rename the bodies top"},{"Start":"04:43.500 ","End":"04:46.730","Text":"and bottom so they’re easier to decipher."},{"Start":"04:52.310 ","End":"04:54.650","Text":"I’ll hide the top and look at the bottom…."},{"Start":"04:55.620 ","End":"04:58.700","Text":"And I’ll hide the bottom so we can"},{"Start":"04:58.700 ","End":"05:00.610","Text":"look at the top again… and you’ll"},{"Start":"05:00.610 ","End":"05:02.680","Text":"see that we’ve successfully cut out"},{"Start":"05:02.690 ","End":"05:04.869","Text":"the donut shape from our mold box."},{"Start":"05:04.879 ","End":"05:09.250","Text":"At this point, we need"},{"Start":"05:09.250 ","End":"05:10.450","Text":"to do a few more things."},{"Start":"05:11.420 ","End":"05:13.290","Text":"We need to create some registration"},{"Start":"05:13.330 ","End":"05:15.240","Text":"pins so the mold always lines up"},{"Start":"05:15.240 ","End":"05:17.109","Text":"correctly when it’s placed together,"},{"Start":"05:17.900 ","End":"05:20.250","Text":"and we also need to create a hole"},{"Start":"05:20.320 ","End":"05:22.579","Text":"that allows the resin, or chocolate,"},{"Start":"05:22.650 ","End":"05:24.699","Text":"or whatever liquid you pour into the"},{"Start":"05:24.700 ","End":"05:27.520","Text":"mold to get into the inside cavity."},{"Start":"05:30.890 ","End":"05:32.400","Text":"Let’s start off by creating"},{"Start":"05:32.400 ","End":"05:33.710","Text":"the registration pins."},{"Start":"05:33.889 ","End":"05:36.099","Text":"I’ll select the top body and hit letter"},{"Start":"05:36.109 ","End":"05:40.169","Text":"“V” on the keyboard to hide it… and I’ll"},{"Start":"05:40.170 ","End":"05:42.019","Text":"select the top plane of the viewcube."},{"Start":"05:43.480 ","End":"05:46.020","Text":"Now you can create registration pins with"},{"Start":"05:46.050 ","End":"05:48.289","Text":"many different shapes, but I personally"},{"Start":"05:48.360 ","End":"05:50.689","Text":"like to use the sphere feature...so I’ll"},{"Start":"05:50.690 ","End":"05:52.700","Text":"select “sphere” from the create dropdown"},{"Start":"05:52.700 ","End":"05:56.659","Text":"menu, and then select the top surface, and"},{"Start":"05:56.660 ","End":"05:59.679","Text":"I’ll make this 10mm wide and click okay."},{"Start":"06:03.740 ","End":"06:05.710","Text":"I’ll select “rectangular pattern” from"},{"Start":"06:05.710 ","End":"06:08.300","Text":"the create dropdown menu, as we’ll want"},{"Start":"06:08.309 ","End":"06:10.809","Text":"to pattern this to the other 3 corners."},{"Start":"06:12.150 ","End":"06:13.850","Text":"Under the pattern type selector,"},{"Start":"06:13.920 ","End":"06:15.509","Text":"I’ll select “features” and then I’ll"},{"Start":"06:15.509 ","End":"06:17.479","Text":"select the sphere from the timeline."},{"Start":"06:19.049 ","End":"06:21.010","Text":"For the direction I’ll click on the edge"},{"Start":"06:21.010 ","End":"06:23.060","Text":"of the mold...and I’m just going to use"},{"Start":"06:23.060 ","End":"06:25.000","Text":"the arrow here to adjust these spheres"},{"Start":"06:25.000 ","End":"06:27.620","Text":"to be approximately in the same spot, as"},{"Start":"06:27.630 ","End":"06:29.979","Text":"the exact location is not that important."},{"Start":"06:32.040 ","End":"06:34.599","Text":"Once I have a new sphere previewed here"},{"Start":"06:34.629 ","End":"06:37.760","Text":"in the other 3 corners I’ll click okay."},{"Start":"06:39.910 ","End":"06:41.550","Text":"Now we’ll have to subtract these"},{"Start":"06:41.550 ","End":"06:43.440","Text":"spheres from the top side of the mold"},{"Start":"06:43.480 ","End":"06:45.260","Text":"so we can 3D print this mold and the"},{"Start":"06:45.260 ","End":"06:47.570","Text":"registration marks will actually work."},{"Start":"06:48.840 ","End":"06:50.319","Text":"I’m going to turn the opacity"},{"Start":"06:50.320 ","End":"06:52.590","Text":"of the top back down to 50%."},{"Start":"06:55.070 ","End":"06:57.030","Text":"Then, I’ll select the combine tool"},{"Start":"06:57.030 ","End":"06:59.080","Text":"once again, and for the target body"},{"Start":"06:59.140 ","End":"07:01.180","Text":"I’ll select the top, and for the"},{"Start":"07:01.180 ","End":"07:03.480","Text":"“tool bodies” I’ll select the bottom."},{"Start":"07:05.090 ","End":"07:06.460","Text":"I’ll make sure the operation is"},{"Start":"07:06.460 ","End":"07:09.579","Text":"set to cut, select New Component,"},{"Start":"07:09.690 ","End":"07:12.180","Text":"and keep tools...and click okay."},{"Start":"07:14.360 ","End":"07:16.100","Text":"Now you’ll see that we no longer need"},{"Start":"07:16.100 ","End":"07:18.110","Text":"the original top body so we can hide"},{"Start":"07:18.110 ","End":"07:20.530","Text":"that… and I’ll double click to rename"},{"Start":"07:20.530 ","End":"07:23.000","Text":"the original component to “Donut Mold"},{"Start":"07:23.010 ","End":"07:26.489","Text":"Bottom.” I’ll also go ahead and rename"},{"Start":"07:26.500 ","End":"07:30.859","Text":"the other component to “Donut Mold Top.”"},{"Start":"07:32.750 ","End":"07:34.859","Text":"I’ll turn the opacity back on for the"},{"Start":"07:34.870 ","End":"07:36.960","Text":"top...and we’ll hide the bottom by"},{"Start":"07:36.960 ","End":"07:38.790","Text":"selecting it and hitting the keyboard"},{"Start":"07:38.790 ","End":"07:43.299","Text":"shortcut letter “V” for view or hide...and"},{"Start":"07:43.299 ","End":"07:45.040","Text":"you’ll notice that now we have both"},{"Start":"07:45.049 ","End":"07:47.419","Text":"the top and bottom pieces of the mold"},{"Start":"07:48.590 ","End":"07:50.660","Text":"with these nice registration spheres."},{"Start":"07:53.420 ","End":"07:55.260","Text":"So now we need to create a hole to"},{"Start":"07:55.260 ","End":"07:57.789","Text":"pour the material into...and this"},{"Start":"07:57.800 ","End":"07:59.760","Text":"part is really subjective to your"},{"Start":"07:59.760 ","End":"08:00.780","Text":"specific requirements and needs."},{"Start":"08:02.559 ","End":"08:04.760","Text":"For this donut, it\u0027s likely only"},{"Start":"08:04.760 ","End":"08:06.460","Text":"going to sit with the frosting side"},{"Start":"08:06.500 ","End":"08:08.480","Text":"up, so I’ll go ahead and put the"},{"Start":"08:08.480 ","End":"08:11.770","Text":"hole in the bottom, as it may leave"},{"Start":"08:11.770 ","End":"08:13.940","Text":"a small ring on the final object."},{"Start":"08:16.679 ","End":"08:17.910","Text":"I’ll hit the keyboard shortcut"},{"Start":"08:17.910 ","End":"08:19.939","Text":"letter “H” for hole, and select the"},{"Start":"08:19.940 ","End":"08:22.459","Text":"bottom surface of the bottom box."},{"Start":"08:23.469 ","End":"08:25.300","Text":"I’m going to click and drag the hole"},{"Start":"08:25.300 ","End":"08:27.349","Text":"point to be about in the middle of the"},{"Start":"08:27.350 ","End":"08:30.909","Text":"donut ring, and we can adjust the hole"},{"Start":"08:30.920 ","End":"08:34.110","Text":"settings to countersink, I’ll type in"},{"Start":"08:34.169 ","End":"08:36.750","Text":"18mm for the width of the countersink,"},{"Start":"08:38.090 ","End":"08:40.709","Text":"I’ll choose simple, and angle."},{"Start":"08:42.799 ","End":"08:44.270","Text":"For the height, I’ll type in"},{"Start":"08:44.280 ","End":"08:46.229","Text":"6mm and for the width, I’ll"},{"Start":"08:46.250 ","End":"08:48.719","Text":"type in 10mm and click okay."},{"Start":"08:54.330 ","End":"08:55.749","Text":"Now, these hole settings again"},{"Start":"08:55.840 ","End":"08:57.770","Text":"really depend on your object, where"},{"Start":"08:57.770 ","End":"08:59.670","Text":"the hole cavity is, and what you’re"},{"Start":"08:59.670 ","End":"09:01.469","Text":"trying to achieve with your mold."},{"Start":"09:02.290 ","End":"09:04.060","Text":"You may have to 3D print one out"},{"Start":"09:04.070 ","End":"09:05.719","Text":"and test the object and tweak"},{"Start":"09:05.720 ","End":"09:07.270","Text":"it based on the results you get."},{"Start":"09:08.650 ","End":"09:10.560","Text":"Now if I turn the opacity back to 100%"},{"Start":"09:11.300 ","End":"09:12.589","Text":"and take a look at the bottom part of"},{"Start":"09:12.590 ","End":"09:14.219","Text":"the mold you’ll see that we have this"},{"Start":"09:14.230 ","End":"09:16.319","Text":"nice pour spout to pour into the mold."},{"Start":"09:26.309 ","End":"09:28.289","Text":"The last thing that we can do is check"},{"Start":"09:28.290 ","End":"09:30.650","Text":"the draft analysis to see how well"},{"Start":"09:30.650 ","End":"09:32.360","Text":"the object will come out of the mold."},{"Start":"09:33.059 ","End":"09:34.679","Text":"I’ll select “draft analysis”"},{"Start":"09:34.690 ","End":"09:36.299","Text":"from the inspect dropdown menu."},{"Start":"09:37.100 ","End":"09:39.650","Text":"I’ll select the body, and then the top"},{"Start":"09:39.650 ","End":"09:42.189","Text":"surface as the direction and click okay…"},{"Start":"09:43.740 ","End":"09:45.510","Text":"and you’ll see that we may have issues"},{"Start":"09:45.520 ","End":"09:47.339","Text":"with the edges coming out of the mold as"},{"Start":"09:47.340 ","End":"09:50.090","Text":"it’s red here… but this really depends"},{"Start":"09:50.090 ","End":"09:51.840","Text":"on the material that you’re working with."},{"Start":"09:54.139 ","End":"09:57.150","Text":"We can re-show the top mold and"},{"Start":"09:57.150 ","End":"09:59.090","Text":"right-click and select “repeat draft"},{"Start":"09:59.090 ","End":"10:01.810","Text":"analysis” and then do the same thing…"},{"Start":"10:03.670 ","End":"10:05.260","Text":"I’ll select the body and the top"},{"Start":"10:05.260 ","End":"10:07.810","Text":"surface as the direction and click okay."},{"Start":"10:08.620 ","End":"10:10.819","Text":"And if we take a look at this one side of"},{"Start":"10:10.819 ","End":"10:13.060","Text":"the mold, you’ll notice that we may end"},{"Start":"10:13.060 ","End":"10:14.110","Text":"up with some issues with undercuts that"},{"Start":"10:14.870 ","End":"10:17.250","Text":"are in this frosting area of the donut."},{"Start":"10:19.210 ","End":"10:20.829","Text":"Now again, this is something that"},{"Start":"10:20.830 ","End":"10:22.130","Text":"you have to play around with."},{"Start":"10:22.219 ","End":"10:24.380","Text":"You may find that a complex 3D printed"},{"Start":"10:24.380 ","End":"10:26.350","Text":"mold will work well if you pour"},{"Start":"10:26.350 ","End":"10:28.680","Text":"something flexible such as silicone,"},{"Start":"10:29.270 ","End":"10:30.980","Text":"and it may not work as well if you"},{"Start":"10:30.980 ","End":"10:33.100","Text":"have a hard material such as resin."},{"Start":"10:34.220 ","End":"10:36.189","Text":"With that said, you can always"},{"Start":"10:36.190 ","End":"10:38.110","Text":"cut up your mold into more pieces,"},{"Start":"10:38.150 ","End":"10:39.780","Text":"allowing you to remove any type"},{"Start":"10:39.780 ","End":"10:41.150","Text":"of material out of the mold."},{"Start":"10:42.020 ","End":"10:44.139","Text":"To cut this up further, you’d simply"},{"Start":"10:44.139 ","End":"10:45.890","Text":"have to follow the same steps...where"},{"Start":"10:45.890 ","End":"10:47.859","Text":"we have to create a construction plane…."},{"Start":"10:48.240 ","End":"10:50.300","Text":"And use the split body tool."},{"Start":"10:59.420 ","End":"11:02.120","Text":"And I could also add registration"},{"Start":"11:02.130 ","End":"11:04.160","Text":"keys on the sides of each mold part."},{"Start":"11:08.800 ","End":"11:10.569","Text":"One thing to keep in mind as well is"},{"Start":"11:10.570 ","End":"11:12.440","Text":"that although more pieces may make"},{"Start":"11:12.440 ","End":"11:14.420","Text":"it easier to pop an object out of the"},{"Start":"11:14.420 ","End":"11:17.240","Text":"mold, you’ll likely end up with parting"},{"Start":"11:17.240 ","End":"11:19.069","Text":"lines where the mold boxes meetup."},{"Start":"11:19.630 ","End":"11:21.740","Text":"So you’ll really have to plan ahead and"},{"Start":"11:21.750 ","End":"11:23.419","Text":"think about the final results you’re"},{"Start":"11:23.420 ","End":"11:26.400","Text":"trying to achieve with your given object."},{"Start":"11:26.400 ","End":"11:27.939","Text":"Lastly, to 3D print this you’ll just"},{"Start":"11:27.940 ","End":"11:29.940","Text":"have to right-click on each component"},{"Start":"11:30.010 ","End":"11:32.650","Text":"and select “save as .STL” and of"},{"Start":"11:32.670 ","End":"11:34.309","Text":"course you could either save it to"},{"Start":"11:34.309 ","End":"11:38.560","Text":"your desktop or send it directly to"},{"Start":"11:38.560 ","End":"11:40.960","Text":"your 3D printer’s slicing software."}],"ID":29004},{"Watched":false,"Name":"Day 22 - Sculpting Earbud Headphones","Duration":"12m 7s","ChapterTopicVideoID":27801,"CourseChapterTopicPlaylistID":275347,"HasSubtitles":true,"ThumbnailPath":null,"UploadDate":null,"DurationForVideoObject":null,"Description":null,"MetaTitle":null,"MetaDescription":null,"Canonical":null,"VideoComments":[],"Subtitles":[{"Start":"00:00.060 ","End":"00:00.940","Text":"Kevin Kennedy: Hey there, It’s"},{"Start":"00:00.970 ","End":"00:03.150","Text":"Kevin Kennedy, and welcome to Day"},{"Start":"00:03.150 ","End":"00:06.790","Text":"#22 of Learn Fusion 360 in 30 days."},{"Start":"00:07.300 ","End":"00:09.010","Text":"By the end of this tutorial,"},{"Start":"00:09.230 ","End":"00:10.520","Text":"you’ll be able to model an"},{"Start":"00:10.610 ","End":"00:12.959","Text":"earbud in the sculpt environment."},{"Start":"00:13.750 ","End":"00:15.340","Text":"We’ll take a look at how to create a"},{"Start":"00:15.349 ","End":"00:19.130","Text":"box, how to select faces and edges,"},{"Start":"00:19.690 ","End":"00:21.790","Text":"and how to use the crease command."},{"Start":"00:27.679 ","End":"00:29.700","Text":"Before we get started, I want to point"},{"Start":"00:29.700 ","End":"00:31.330","Text":"out that this tutorial is going to"},{"Start":"00:31.340 ","End":"00:34.050","Text":"be a very basic sculpting tutorial."},{"Start":"00:34.059 ","End":"00:34.164","Text":"If you’re new to the sculpt workspace"},{"Start":"00:34.164 ","End":"00:34.249","Text":"then you’re in the right place."},{"Start":"00:34.249 ","End":"00:34.334","Text":"I’m also pondering the idea of"},{"Start":"00:34.334 ","End":"00:34.419","Text":"creating an entire series on sculpting,"},{"Start":"00:34.419 ","End":"00:34.504","Text":"but only if there’s enough viewer"},{"Start":"00:34.504 ","End":"00:34.561","Text":"interest...so if you’re interested"},{"Start":"00:34.561 ","End":"00:34.646","Text":"in more sculpting videos then please"},{"Start":"00:34.646 ","End":"00:34.745","Text":"let me know in the comments below."},{"Start":"00:34.760 ","End":"00:37.420","Text":"You should also understand that mastering"},{"Start":"00:37.420 ","End":"00:39.559","Text":"the sculpting or t-spline environment"},{"Start":"00:39.590 ","End":"00:43.070","Text":"simply takes time AND hours of practice."},{"Start":"00:43.800 ","End":"00:45.720","Text":"You’ll need to get very familiar with the"},{"Start":"00:45.720 ","End":"00:48.400","Text":"commands, as you’ll see in this lesson"},{"Start":"00:48.410 ","End":"00:51.739","Text":"that just by holding down one key can make"},{"Start":"00:51.820 ","End":"00:53.989","Text":"all the difference in the results you get."},{"Start":"00:55.470 ","End":"00:57.139","Text":"Now let’s get started by hitting the"},{"Start":"00:57.170 ","End":"00:59.400","Text":"“create form” button in the toolbar,"},{"Start":"00:59.950 ","End":"01:01.160","Text":"and you’ll see that it will give you"},{"Start":"01:01.160 ","End":"01:02.910","Text":"this message that you have entered"},{"Start":"01:02.910 ","End":"01:05.180","Text":"the sculpt environment and you’ll have"},{"Start":"01:05.180 ","End":"01:07.479","Text":"to click finish form to go back to"},{"Start":"01:07.480 ","End":"01:10.540","Text":"solid modeling… and if you don’t want"},{"Start":"01:10.540 ","End":"01:12.880","Text":"this message to display anymore then"},{"Start":"01:12.880 ","End":"01:14.860","Text":"you can simply select “do not show"},{"Start":"01:14.870 ","End":"01:17.560","Text":"me this again” before you click okay."},{"Start":"01:19.390 ","End":"01:21.269","Text":"To start our earbud we’ll use a"},{"Start":"01:21.280 ","End":"01:23.649","Text":"box...so I’ll select the box in"},{"Start":"01:23.650 ","End":"01:25.739","Text":"the toolbar and then select the"},{"Start":"01:25.750 ","End":"01:28.729","Text":"front plane, and the center origin."},{"Start":"01:29.690 ","End":"01:32.020","Text":"I’ll drag out with my mouse, and I’ll type"},{"Start":"01:32.020 ","End":"01:35.220","Text":"in 15mm, hit the tab key to lock-in that"},{"Start":"01:35.220 ","End":"01:38.160","Text":"dimension, and I’ll make the other side"},{"Start":"01:38.240 ","End":"01:42.570","Text":"15mm as well...and I’ll make the depth"},{"Start":"01:42.750 ","End":"01:46.569","Text":"12mm and I’ll hit enter to create the box."},{"Start":"01:48.000 ","End":"01:49.179","Text":"Now let’s take a look at some"},{"Start":"01:49.180 ","End":"01:50.789","Text":"of the basic sculpting commands"},{"Start":"01:50.790 ","End":"01:52.060","Text":"you’ll want to get used to."},{"Start":"01:53.190 ","End":"01:54.650","Text":"In the sculpt environment you can"},{"Start":"01:54.650 ","End":"01:56.679","Text":"think of it like manipulating clay"},{"Start":"01:56.929 ","End":"01:59.160","Text":"or some sort of workable material."},{"Start":"02:00.059 ","End":"02:01.679","Text":"We’re going to control all of these"},{"Start":"02:01.679 ","End":"02:04.219","Text":"different faces and edges to push and"},{"Start":"02:04.219 ","End":"02:06.910","Text":"pull and change their position in order"},{"Start":"02:06.920 ","End":"02:08.820","Text":"to get the final outcome that we want."},{"Start":"02:10.710 ","End":"02:11.990","Text":"You’ll see that if I just click"},{"Start":"02:11.990 ","End":"02:13.850","Text":"on a face it will select it, but"},{"Start":"02:13.920 ","End":"02:15.600","Text":"oftentimes you’ll want to select"},{"Start":"02:15.609 ","End":"02:17.260","Text":"many faces or edges at once."},{"Start":"02:17.260 ","End":"02:21.709","Text":"To select all faces in a row you can"},{"Start":"02:21.779 ","End":"02:24.070","Text":"select the first face, then holding down"},{"Start":"02:24.070 ","End":"02:26.980","Text":"the shift key I will double-click on"},{"Start":"02:26.980 ","End":"02:29.329","Text":"the second face...and you’ll see that"},{"Start":"02:29.330 ","End":"02:31.260","Text":"it highlights everything in the row."},{"Start":"02:33.200 ","End":"02:34.950","Text":"So I’ll do that again in another"},{"Start":"02:34.950 ","End":"02:37.100","Text":"direction so you can see it again."},{"Start":"02:41.000 ","End":"02:43.820","Text":"Now to select edges all the way around all"},{"Start":"02:43.820 ","End":"02:45.950","Text":"you have to do is double click on them."},{"Start":"02:46.550 ","End":"02:48.530","Text":"So if I double click on this center"},{"Start":"02:48.560 ","End":"02:50.329","Text":"edge you’ll see that it highlights"},{"Start":"02:50.410 ","End":"02:52.170","Text":"all the way around the object."},{"Start":"02:53.300 ","End":"02:55.070","Text":"Another thing that can be helpful"},{"Start":"02:55.309 ","End":"02:57.159","Text":"at times, especially if you want"},{"Start":"02:57.159 ","End":"02:59.339","Text":"to select a large number of faces,"},{"Start":"02:59.680 ","End":"03:02.200","Text":"is to use the paint selection tool."},{"Start":"03:03.120 ","End":"03:04.950","Text":"You’ll find the paint selection tool"},{"Start":"03:04.970 ","End":"03:07.870","Text":"under the “select menu” or by activating"},{"Start":"03:07.880 ","End":"03:10.420","Text":"it with the keyboard shortcut number 3."},{"Start":"03:11.480 ","End":"03:14.110","Text":"If I select paint selection and drag"},{"Start":"03:14.170 ","End":"03:16.269","Text":"over the object you’ll see that it will"},{"Start":"03:16.270 ","End":"03:18.620","Text":"select everything in the cursor’s path."},{"Start":"03:19.750 ","End":"03:21.850","Text":"The only problem with this is that I’m"},{"Start":"03:21.850 ","End":"03:25.519","Text":"selected edges along with the faces...so"},{"Start":"03:25.519 ","End":"03:28.040","Text":"if I just want to select faces I’ll need"},{"Start":"03:28.040 ","End":"03:30.499","Text":"to set the “selection priority” under"},{"Start":"03:30.500 ","End":"03:34.540","Text":"the select dropdown menu to “select face"},{"Start":"03:34.570 ","End":"03:39.180","Text":"priority.” If I go back up to the menu"},{"Start":"03:39.240 ","End":"03:41.859","Text":"and select the “selection filters” you’ll"},{"Start":"03:41.859 ","End":"03:44.130","Text":"see that it automatically changed it so"},{"Start":"03:44.130 ","End":"03:48.090","Text":"we’re only selecting faces… so at times,"},{"Start":"03:48.130 ","End":"03:50.609","Text":"you may also find it helpful to manually"},{"Start":"03:50.610 ","End":"03:52.579","Text":"select which type of objects you’re"},{"Start":"03:52.959 ","End":"03:57.010","Text":"trying to select with the selection tool."},{"Start":"03:57.020 ","End":"04:03.960","Text":"If I clear out the selection and paint"},{"Start":"04:03.960 ","End":"04:06.789","Text":"over it again by dragging over the object"},{"Start":"04:06.790 ","End":"04:09.020","Text":"with my cursor, you’ll see that this"},{"Start":"04:09.030 ","End":"04:11.639","Text":"time it only selects the faces of the"},{"Start":"04:11.670 ","End":"04:15.460","Text":"object… not any edges or other elements."},{"Start":"04:18.360 ","End":"04:19.870","Text":"Alrighty, so now that we’ve covered"},{"Start":"04:19.870 ","End":"04:22.070","Text":"some of the fundamentals of selecting"},{"Start":"04:22.070 ","End":"04:24.489","Text":"faces and edges, let’s go ahead"},{"Start":"04:24.500 ","End":"04:26.109","Text":"and start sculpting an earbud."},{"Start":"04:27.730 ","End":"04:29.989","Text":"For the sake of simplicity in this very"},{"Start":"04:29.990 ","End":"04:31.960","Text":"beginner demo, I’m going to make an"},{"Start":"04:32.230 ","End":"04:34.950","Text":"earbud that is symmetrical… and before"},{"Start":"04:34.950 ","End":"04:37.210","Text":"we start here I’ll reset the “selection"},{"Start":"04:37.210 ","End":"04:40.800","Text":"filters” to “select all” and then I’ll"},{"Start":"04:40.800 ","End":"04:43.409","Text":"change the selection back to “window.”"},{"Start":"04:48.109 ","End":"04:49.555","Text":"I’m going to double click on the"},{"Start":"04:49.720 ","End":"04:51.880","Text":"centerline to select the entire edge"},{"Start":"04:51.910 ","End":"04:54.010","Text":"and I’m going to right-click and select"},{"Start":"04:54.090 ","End":"04:57.590","Text":"“edit form.” The edit form feature is"},{"Start":"04:57.590 ","End":"04:59.410","Text":"the main feature you’ll be using in the"},{"Start":"04:59.410 ","End":"05:01.950","Text":"sculpt workspace, that gives us these"},{"Start":"05:01.980 ","End":"05:04.600","Text":"icons here which allow us to move and"},{"Start":"05:04.600 ","End":"05:07.700","Text":"manipulate the object in all directions."},{"Start":"05:09.520 ","End":"05:11.080","Text":"I’m going to look at the object from"},{"Start":"05:11.080 ","End":"05:13.060","Text":"the front view… and then I’ll select"},{"Start":"05:13.060 ","End":"05:15.240","Text":"this horizontal slider and I’m going to"},{"Start":"05:15.240 ","End":"05:18.450","Text":"drag upwards… and you’ll notice that by"},{"Start":"05:18.450 ","End":"05:20.849","Text":"dragging this handle upwards it’s changing"},{"Start":"05:20.849 ","End":"05:22.789","Text":"our box shape to have a more rounded"},{"Start":"05:22.789 ","End":"05:25.710","Text":"surface on both the top and the bottom."},{"Start":"05:27.290 ","End":"05:28.940","Text":"I’m just going to hit enter, and"},{"Start":"05:28.940 ","End":"05:30.510","Text":"then I’ll repeat these steps."},{"Start":"05:31.520 ","End":"05:33.660","Text":"I’ll double click on the horizontal line"},{"Start":"05:33.730 ","End":"05:36.330","Text":"and then right-click and select edit form."},{"Start":"05:37.500 ","End":"05:39.539","Text":"Then once again I’ll drag the"},{"Start":"05:39.540 ","End":"05:41.469","Text":"vertical slider until I like the"},{"Start":"05:41.469 ","End":"05:44.070","Text":"shape...and if I need to I can go"},{"Start":"05:44.070 ","End":"05:46.420","Text":"back and adjust the other direction..."},{"Start":"05:50.870 ","End":"05:52.530","Text":"Now that we have the rounded shape"},{"Start":"05:53.260 ","End":"05:54.269","Text":"we’ll want to pull the shape to the"},{"Start":"05:54.270 ","End":"05:56.520","Text":"right to make the length of the earbud."},{"Start":"05:57.330 ","End":"05:59.580","Text":"I’m going to select this back face and"},{"Start":"05:59.580 ","End":"06:01.280","Text":"the double click on the face above it…"},{"Start":"06:02.030 ","End":"06:04.430","Text":"again because this will select the entire"},{"Start":"06:04.430 ","End":"06:07.240","Text":"row… and I’m also going to hold down the"},{"Start":"06:07.240 ","End":"06:10.110","Text":"shift key and select the four back faces."},{"Start":"06:11.460 ","End":"06:13.640","Text":"Then, I’ll right-click and select"},{"Start":"06:13.719 ","End":"06:15.719","Text":"edit form...and this time I’m"},{"Start":"06:15.719 ","End":"06:17.679","Text":"going to use the arrow icon."},{"Start":"06:18.209 ","End":"06:20.670","Text":"So if I drag the arrow icon you’ll see"},{"Start":"06:20.670 ","End":"06:22.940","Text":"this icon allows us to push and pull"},{"Start":"06:22.970 ","End":"06:25.540","Text":"the length or height of an object…"},{"Start":"06:26.150 ","End":"06:27.709","Text":"and I’m just going to drag it until"},{"Start":"06:27.710 ","End":"06:29.770","Text":"the length seems about right for an"},{"Start":"06:29.770 ","End":"06:32.099","Text":"earbud, and then I’ll click okay."},{"Start":"06:33.889 ","End":"06:35.289","Text":"At this point, I want to create"},{"Start":"06:35.299 ","End":"06:37.279","Text":"the cavity for the earbud, so I’m"},{"Start":"06:37.279 ","End":"06:39.230","Text":"going to hold down the shift key and"},{"Start":"06:39.540 ","End":"06:42.380","Text":"select all four of the front faces."},{"Start":"06:43.359 ","End":"06:44.810","Text":"Then, this time I’m going to use the"},{"Start":"06:44.889 ","End":"06:47.619","Text":"circle icon in the middle that has"},{"Start":"06:47.620 ","End":"06:49.280","Text":"3 triangles when I hover over it."},{"Start":"06:51.039 ","End":"06:53.349","Text":"Now, this icon will either resize your"},{"Start":"06:53.349 ","End":"06:56.500","Text":"faces or it will create new faces."},{"Start":"06:57.370 ","End":"06:59.950","Text":"If I simply select it and drag in and"},{"Start":"06:59.950 ","End":"07:02.840","Text":"out you’ll see that it resizes the faces…"},{"Start":"07:04.179 ","End":"07:05.659","Text":"But, we also want to create"},{"Start":"07:05.660 ","End":"07:07.030","Text":"some more faces here."},{"Start":"07:07.730 ","End":"07:09.800","Text":"This time I’m going to hold down the"},{"Start":"07:09.889 ","End":"07:12.414","Text":"“option” or “alt” key and I’m doing"},{"Start":"07:12.540 ","End":"07:15.960","Text":"to drag in with my mouse again… and"},{"Start":"07:15.960 ","End":"07:17.539","Text":"you’ll see that now we went from"},{"Start":"07:17.540 ","End":"07:20.230","Text":"having four faces to a bunch of faces"},{"Start":"07:20.230 ","End":"07:23.380","Text":"here… so this is really important."},{"Start":"07:23.840 ","End":"07:25.509","Text":"You can see all the difference it"},{"Start":"07:25.509 ","End":"07:27.279","Text":"makes holding down the option or"},{"Start":"07:27.280 ","End":"07:30.159","Text":"alt key, whereas if we just selected"},{"Start":"07:30.159 ","End":"07:32.380","Text":"this icon and moved our mouse it"},{"Start":"07:32.380 ","End":"07:34.489","Text":"would simply resize the faces."},{"Start":"07:36.120 ","End":"07:38.560","Text":"Holding down the option or alt key again"},{"Start":"07:38.630 ","End":"07:40.840","Text":"I’m going to slide this in a bit further"},{"Start":"07:40.849 ","End":"07:43.560","Text":"making some more faces here...and you"},{"Start":"07:43.560 ","End":"07:45.459","Text":"can see that our earbud is starting to"},{"Start":"07:45.469 ","End":"07:47.990","Text":"get a more defined front curve here."},{"Start":"07:49.260 ","End":"07:51.549","Text":"Now what the option or alt key does"},{"Start":"07:51.590 ","End":"07:54.290","Text":"is it tells Fusion 360 that you just"},{"Start":"07:54.290 ","End":"07:56.630","Text":"want to manipulate the faces selected,"},{"Start":"07:56.990 ","End":"07:59.210","Text":"and not all of the faces around it."},{"Start":"08:00.200 ","End":"08:01.809","Text":"So if I look at the model from the"},{"Start":"08:01.809 ","End":"08:04.669","Text":"right a bit more, and then select the"},{"Start":"08:04.680 ","End":"08:07.860","Text":"back arrow… you’ll see that as I drag"},{"Start":"08:07.860 ","End":"08:10.520","Text":"the arrow back it\u0027s really changing all"},{"Start":"08:10.520 ","End":"08:13.040","Text":"of these faces in the front here….but"},{"Start":"08:13.040 ","End":"08:16.509","Text":"let me hit CMD Z to undo...and if I"},{"Start":"08:16.510 ","End":"08:18.870","Text":"do this again while holding down the"},{"Start":"08:18.920 ","End":"08:21.750","Text":"option/alt key, you’ll see that this"},{"Start":"08:21.780 ","End":"08:23.980","Text":"time it’s not changing the thickness"},{"Start":"08:24.000 ","End":"08:26.109","Text":"or the position of these outer faces."},{"Start":"08:27.280 ","End":"08:29.940","Text":"So I’m just going to click “okay.”Now"},{"Start":"08:29.940 ","End":"08:32.179","Text":"that the earbud cavity is created…"},{"Start":"08:32.260 ","End":"08:33.980","Text":"I’ll take a look at the back so I can"},{"Start":"08:33.980 ","End":"08:36.339","Text":"start to create the plastic cylinder."},{"Start":"08:37.270 ","End":"08:38.949","Text":"I’m going to hold down the shift key"},{"Start":"08:39.000 ","End":"08:42.129","Text":"and select the back four faces… and this"},{"Start":"08:42.129 ","End":"08:44.480","Text":"time I’m going to right-click and select"},{"Start":"08:45.040 ","End":"08:47.290","Text":"the crease tool, which will create a"},{"Start":"08:47.340 ","End":"08:50.490","Text":"crease or sharp edges between faces."},{"Start":"08:52.969 ","End":"08:55.729","Text":"Then I’ll select the four faces again"},{"Start":"08:55.750 ","End":"08:57.720","Text":"while holding down Shift, and I’m"},{"Start":"08:57.720 ","End":"08:59.630","Text":"going to drag the center circle to"},{"Start":"08:59.630 ","End":"09:02.400","Text":"make this shape a little smaller… and"},{"Start":"09:02.400 ","End":"09:04.510","Text":"I’ll go ahead and hold down the option"},{"Start":"09:04.540 ","End":"09:07.360","Text":"or alt key to create some more faces."},{"Start":"09:10.809 ","End":"09:12.439","Text":"Next, I’m going to select the"},{"Start":"09:12.440 ","End":"09:14.590","Text":"horizontal arrow, and while holding"},{"Start":"09:14.590 ","End":"09:16.789","Text":"down option or alt I’m going to push"},{"Start":"09:16.789 ","End":"09:20.140","Text":"it back into the earbud… I’m going"},{"Start":"09:20.140 ","End":"09:22.840","Text":"to let go of all the keys and then"},{"Start":"09:22.840 ","End":"09:25.750","Text":"holding down option/alt again I’m"},{"Start":"09:25.750 ","End":"09:27.649","Text":"going to drag the arrow back out..."},{"Start":"09:27.789 ","End":"09:30.669","Text":"So you’ll see now we have the cylinder"},{"Start":"09:30.990 ","End":"09:33.450","Text":"protruding from the front of the earbud."},{"Start":"09:35.049 ","End":"09:37.980","Text":"I can also hold down option/alt again"},{"Start":"09:38.030 ","End":"09:40.450","Text":"and drag the center slider to create more"},{"Start":"09:40.450 ","End":"09:43.290","Text":"faces and round over the edge of this"},{"Start":"09:43.340 ","End":"09:46.470","Text":"cylinder… and I’m going to click okay."},{"Start":"09:47.940 ","End":"09:49.670","Text":"Now the last thing that we want to do"},{"Start":"09:49.690 ","End":"09:51.610","Text":"is make the plastic piece that runs"},{"Start":"09:51.620 ","End":"09:54.039","Text":"vertically from this horizontal cylinder."},{"Start":"09:55.150 ","End":"09:57.050","Text":"Before we start to drag the shape I’ll"},{"Start":"09:57.050 ","End":"09:59.260","Text":"want to create some more faces giving"},{"Start":"09:59.260 ","End":"10:02.080","Text":"us a bit more control… so one thing"},{"Start":"10:02.080 ","End":"10:04.470","Text":"that we can do is insert another edge"},{"Start":"10:04.520 ","End":"10:08.049","Text":"or this line here, when necessary."},{"Start":"10:09.610 ","End":"10:11.319","Text":"To do this I’m going to double click"},{"Start":"10:11.320 ","End":"10:13.910","Text":"on the edge to select it, then I’m"},{"Start":"10:13.910 ","End":"10:15.960","Text":"going to go to the modify dropdown"},{"Start":"10:16.420 ","End":"10:20.259","Text":"list and select “insert edge” and"},{"Start":"10:20.260 ","End":"10:22.390","Text":"you’ll see the green preview line is"},{"Start":"10:22.390 ","End":"10:25.000","Text":"where the new edge will go… so I can"},{"Start":"10:25.000 ","End":"10:27.179","Text":"simply drag this slider to change the"},{"Start":"10:27.179 ","End":"10:29.749","Text":"position of it, before clicking okay."},{"Start":"10:31.890 ","End":"10:33.850","Text":"Now if I look at the bottom, you’ll"},{"Start":"10:33.850 ","End":"10:35.870","Text":"see I have these extra faces here,"},{"Start":"10:35.960 ","End":"10:37.970","Text":"so we won’t mess up the earbud or"},{"Start":"10:37.970 ","End":"10:39.740","Text":"the back of this cylinder shape."},{"Start":"10:40.730 ","End":"10:42.280","Text":"I’ll go ahead and select these two"},{"Start":"10:42.280 ","End":"10:44.909","Text":"faces while holding down shift, I’ll"},{"Start":"10:44.910 ","End":"10:47.909","Text":"right-click and select edit form, and"},{"Start":"10:47.910 ","End":"10:50.440","Text":"I’m going to select the vertical arrow."},{"Start":"10:51.700 ","End":"10:53.960","Text":"Then, while holding down option/alt"},{"Start":"10:54.090 ","End":"10:56.150","Text":"I’m going to drag down just a bit"},{"Start":"10:56.330 ","End":"10:59.000","Text":"and release all keys, and then I’ll"},{"Start":"10:59.000 ","End":"11:02.379","Text":"hold option/alt again and this time"},{"Start":"11:02.380 ","End":"11:03.775","Text":"I’ll drag it down quite a ways."},{"Start":"11:03.775 ","End":"11:08.469","Text":"Lastly, I’ll hold option/alt and drag the"},{"Start":"11:08.480 ","End":"11:11.360","Text":"center slider to square off the bottom a"},{"Start":"11:11.360 ","End":"11:14.580","Text":"bit...and then I’m going to click okay."},{"Start":"11:23.789 ","End":"11:25.300","Text":"Once you’re satisfied with your"},{"Start":"11:25.300 ","End":"11:27.540","Text":"sculpted shape you can click “finish"},{"Start":"11:27.540 ","End":"11:29.890","Text":"form” which will convert it from a"},{"Start":"11:29.890 ","End":"11:32.680","Text":"T-spline model back to a solid body."},{"Start":"11:33.510 ","End":"11:35.889","Text":"So you’ll see now I’m automatically"},{"Start":"11:35.950 ","End":"11:37.930","Text":"back in the model workspace and I"},{"Start":"11:37.930 ","End":"11:40.580","Text":"can use the model tools to manipulate"},{"Start":"11:40.580 ","End":"11:42.389","Text":"this further if I needed to."},{"Start":"11:43.550 ","End":"11:45.620","Text":"So to wrap this video up I want to"},{"Start":"11:45.620 ","End":"11:47.660","Text":"remind you guys that in order to"},{"Start":"11:47.660 ","End":"11:50.110","Text":"master the sculpt workspace you really"},{"Start":"11:50.110 ","End":"11:51.839","Text":"need to get used to holding down and"},{"Start":"11:51.840 ","End":"11:54.069","Text":"selecting the right keys in order"},{"Start":"11:54.070 ","End":"11:57.099","Text":"to take full control...otherwise,"},{"Start":"11:57.120 ","End":"11:58.959","Text":"it can be very frustrating."},{"Start":"12:00.059 ","End":"12:02.079","Text":"This first sculpt video was very"},{"Start":"12:02.090 ","End":"12:04.170","Text":"entry-level and it’s a great place to"},{"Start":"12:04.170 ","End":"12:05.980","Text":"start getting used to these commands."},{"Start":"12:05.980 ","End":"12:05.983","Text":"Once again, if you’d like me to make an"},{"Start":"12:05.983 ","End":"12:05.988","Text":"entire series on sculpting then be sure"},{"Start":"12:05.988 ","End":"12:06.010","Text":"to let me know in the comments below!"}],"ID":29005},{"Watched":false,"Name":"Day 23 - Sculpting a Computer Mouse","Duration":"13m 59s","ChapterTopicVideoID":27802,"CourseChapterTopicPlaylistID":275347,"HasSubtitles":true,"ThumbnailPath":null,"UploadDate":null,"DurationForVideoObject":null,"Description":null,"MetaTitle":null,"MetaDescription":null,"Canonical":null,"VideoComments":[],"Subtitles":[{"Start":"00:00.120 ","End":"00:00.970","Text":"Kevin Kennedy: Hey there, It’s"},{"Start":"00:00.970 ","End":"00:03.190","Text":"Kevin Kennedy, and welcome to Day"},{"Start":"00:03.190 ","End":"00:06.850","Text":"#23 of Learn Fusion 360 in 30 days."},{"Start":"00:07.340 ","End":"00:09.130","Text":"By the end of this tutorial,"},{"Start":"00:09.370 ","End":"00:11.230","Text":"you’ll be able to model a computer"},{"Start":"00:11.230 ","End":"00:13.370","Text":"mouse in the sculpt environment."},{"Start":"00:14.020 ","End":"00:15.229","Text":"We’ll take a look at how to use"},{"Start":"00:15.230 ","End":"00:17.740","Text":"the symmetry feature, how to insert"},{"Start":"00:17.740 ","End":"00:20.310","Text":"an edge, and how to use the crease"},{"Start":"00:20.350 ","End":"00:23.279","Text":"command to create a flat surface."},{"Start":"00:29.030 ","End":"00:30.909","Text":"To get started I’m going to insert"},{"Start":"00:30.950 ","End":"00:33.359","Text":"a reference image into the canvas."},{"Start":"00:33.740 ","End":"00:35.660","Text":"If you’re sculpting a shape off an"},{"Start":"00:35.699 ","End":"00:37.477","Text":"already-existing object or shape"},{"Start":"00:37.600 ","End":"00:39.500","Text":"then this can be super helpful"},{"Start":"00:39.600 ","End":"00:41.170","Text":"in getting the shape started."},{"Start":"00:41.790 ","End":"00:43.440","Text":"I’ve also found that even if you’re"},{"Start":"00:43.440 ","End":"00:46.360","Text":"creating a new product from scratch that"},{"Start":"00:46.360 ","End":"00:48.680","Text":"a rough reference sketch can be very"},{"Start":"00:48.680 ","End":"00:50.899","Text":"helpful when using the sculpting mode."},{"Start":"00:52.600 ","End":"00:54.640","Text":"I’ll select “attached canvas”"},{"Start":"00:54.650 ","End":"00:57.010","Text":"from the insert dropdown menu or"},{"Start":"00:57.010 ","End":"00:58.940","Text":"by selecting it in the toolbar."},{"Start":"00:59.600 ","End":"01:02.150","Text":"I’ll select the right plane… and then"},{"Start":"01:02.150 ","End":"01:04.320","Text":"I’ll select the image from my desktop."},{"Start":"01:05.820 ","End":"01:07.530","Text":"I’m just going to drag the outer"},{"Start":"01:07.530 ","End":"01:09.619","Text":"slider and scale it up for now…"},{"Start":"01:10.129 ","End":"01:11.920","Text":"and we’ll calibrate the size in"},{"Start":"01:11.920 ","End":"01:13.870","Text":"just a bit...so I’ll click okay."},{"Start":"01:15.430 ","End":"01:17.020","Text":"Let’s go ahead and calibrate the"},{"Start":"01:17.020 ","End":"01:18.790","Text":"size of our reference image, so"},{"Start":"01:18.790 ","End":"01:20.560","Text":"our sculpted form will naturally"},{"Start":"01:20.560 ","End":"01:22.539","Text":"follow the realistic dimensions."},{"Start":"01:24.059 ","End":"01:26.589","Text":"I’ll toggle open the “canvases” folder and"},{"Start":"01:26.589 ","End":"01:28.229","Text":"then right-click on the “computer-mouse”"},{"Start":"01:28.230 ","End":"01:32.110","Text":"image and select “calibrate.” Then,"},{"Start":"01:32.400 ","End":"01:34.080","Text":"you’ll see that I can select the first"},{"Start":"01:34.080 ","End":"01:36.490","Text":"point on the canvas...so I’ll just click"},{"Start":"01:36.490 ","End":"01:38.250","Text":"where the front tip of the mouse is…"},{"Start":"01:39.150 ","End":"01:41.050","Text":"and then I’ll need to define the second"},{"Start":"01:41.050 ","End":"01:42.815","Text":"point...and I’ll click at the furthest"},{"Start":"01:43.080 ","End":"01:45.610","Text":"point of the back part of the mouse."},{"Start":"01:46.410 ","End":"01:48.729","Text":"Now after I add the second point I"},{"Start":"01:48.730 ","End":"01:50.920","Text":"can type out a dimension...so I’ll"},{"Start":"01:50.920 ","End":"01:54.640","Text":"type out 114mm and click enter..."},{"Start":"01:55.570 ","End":"01:57.380","Text":"and you’ll see the reference image will"},{"Start":"01:57.420 ","End":"01:59.899","Text":"immediately resize to those dimensions."},{"Start":"01:59.899 ","End":"02:08.271","Text":"The last thing that I’ll do is right-click"},{"Start":"02:08.271 ","End":"02:08.350","Text":"on the reference image and select"},{"Start":"02:08.350 ","End":"02:09.259","Text":"“move/copy” and I’m going to move the"},{"Start":"02:09.270 ","End":"02:13.470","Text":"image up about 20mm or so… until the"},{"Start":"02:13.480 ","End":"02:15.390","Text":"bottom of the mouse is lined up with the"},{"Start":"02:15.400 ","End":"02:17.750","Text":"bottom plane because I’m going to start"},{"Start":"02:17.759 ","End":"02:19.979","Text":"the sculpt form off the bottom plane."},{"Start":"02:21.580 ","End":"02:23.400","Text":"and...before I go any further"},{"Start":"02:23.430 ","End":"02:25.190","Text":"I’ll click the save icon and I’ll"},{"Start":"02:25.190 ","End":"02:27.269","Text":"save this as “computer mouse.”"},{"Start":"02:28.900 ","End":"02:29.840","Text":"Now let’s get started"},{"Start":"02:29.840 ","End":"02:31.120","Text":"with sculpting the mouse."},{"Start":"02:31.300 ","End":"02:33.039","Text":"You can really start with a number of"},{"Start":"02:33.330 ","End":"02:35.090","Text":"shapes in the sculpt workspace, but I"},{"Start":"02:35.099 ","End":"02:37.210","Text":"find it easiest to always start with"},{"Start":"02:37.210 ","End":"02:39.199","Text":"the premade shape that is closest to the"},{"Start":"02:39.200 ","End":"02:41.330","Text":"final shape you’re trying to achieve."},{"Start":"02:41.330 ","End":"02:42.970","Text":"In this case, the mouse is really"},{"Start":"02:42.970 ","End":"02:44.770","Text":"just a rounded box, so I’m just going"},{"Start":"02:44.770 ","End":"02:46.750","Text":"to select the box from the toolbar."},{"Start":"02:47.870 ","End":"02:50.079","Text":"Then, I’ll select the bottom plane,"},{"Start":"02:50.639 ","End":"02:52.350","Text":"I’ll click on the center origin,"},{"Start":"02:52.660 ","End":"02:54.329","Text":"and I’ll drag it out with my mouse."},{"Start":"02:55.540 ","End":"02:57.920","Text":"Now I’ll go ahead and type the overall"},{"Start":"02:57.920 ","End":"03:00.060","Text":"dimensions of the mouse..which are"},{"Start":"03:00.070 ","End":"03:04.489","Text":"114mm long, I’ll hit the tab key to"},{"Start":"03:04.490 ","End":"03:06.780","Text":"lock the dimension in place, and then"},{"Start":"03:07.500 ","End":"03:09.929","Text":"62mm for the width, followed by the"},{"Start":"03:09.929 ","End":"03:11.950","Text":"tab key to lock the dimension in place."},{"Start":"03:13.410 ","End":"03:15.399","Text":"Then, you’ll notice the box feature"},{"Start":"03:15.429 ","End":"03:17.520","Text":"immediately prompts us for the height…"},{"Start":"03:17.779 ","End":"03:19.310","Text":"so I’m going to look at the mouse from"},{"Start":"03:19.310 ","End":"03:21.549","Text":"the right view… and you’ll notice that"},{"Start":"03:21.560 ","End":"03:24.429","Text":"the horizontal line of the box lines up"},{"Start":"03:24.440 ","End":"03:26.470","Text":"well with this horizontal plane of the"},{"Start":"03:26.480 ","End":"03:29.520","Text":"mouse… or this imaginary plane if I were"},{"Start":"03:29.520 ","End":"03:31.649","Text":"to cut the mouse through its side where"},{"Start":"03:31.650 ","End":"03:33.900","Text":"I could get the largest flat surface..."},{"Start":"03:35.379 ","End":"03:37.240","Text":"so I’m just going to click okay… and"},{"Start":"03:37.240 ","End":"03:39.090","Text":"you’ll see that we have a basic shape"},{"Start":"03:39.180 ","End":"03:41.700","Text":"approximately the same size as a mouse."},{"Start":"03:42.360 ","End":"03:46.950","Text":"Now a few more quick tips"},{"Start":"03:46.980 ","End":"03:48.770","Text":"before we re-shape this box."},{"Start":"03:49.380 ","End":"03:51.340","Text":"First off, let’s turn off the"},{"Start":"03:51.349 ","End":"03:52.909","Text":"origin planes by selecting the"},{"Start":"03:52.910 ","End":"03:55.280","Text":"light-bulb in the Fusion 360 browser."},{"Start":"03:56.940 ","End":"03:58.510","Text":"Any time you’re working in the sculpt"},{"Start":"03:58.510 ","End":"04:00.090","Text":"environment you’ll want to turn off"},{"Start":"04:00.470 ","End":"04:01.930","Text":"other objects that can get in the"},{"Start":"04:01.930 ","End":"04:04.339","Text":"way...as it can get pretty confusing"},{"Start":"04:04.340 ","End":"04:07.190","Text":"when you’re pushing and pulling faces."},{"Start":"04:08.110 ","End":"04:10.290","Text":"Also, you’ll notice that the box shape we"},{"Start":"04:10.290 ","End":"04:12.640","Text":"created automatically has a transparent"},{"Start":"04:12.640 ","End":"04:14.389","Text":"appearance because of the reference"},{"Start":"04:14.389 ","End":"04:16.429","Text":"image splitting it down the middle."},{"Start":"04:17.389 ","End":"04:19.519","Text":"If I toggle the reference image on and"},{"Start":"04:22.040 ","End":"04:27.039","Text":"off you’ll see that the box is turned"},{"Start":"04:27.039 ","End":"04:27.939","Text":"to 100% opacity...and sometimes I find"},{"Start":"04:27.939 ","End":"04:28.989","Text":"it helpful to turn down the opacity"},{"Start":"04:28.989 ","End":"04:30.039","Text":"of the sculpted form so it’s easier"},{"Start":"04:30.039 ","End":"04:32.470","Text":"to see details on the reference image."},{"Start":"04:33.180 ","End":"04:35.050","Text":"If you want to turn the opacity down"},{"Start":"04:35.050 ","End":"04:36.849","Text":"simply right-click on the body in"},{"Start":"04:36.850 ","End":"04:40.280","Text":"the browser and change the opacity"},{"Start":"04:40.320 ","End":"04:42.200","Text":"under the “opacity control”..."},{"Start":"04:42.740 ","End":"04:44.830","Text":"but for the sake of this video and"},{"Start":"04:44.830 ","End":"04:46.809","Text":"making it easier for you guys to see"},{"Start":"04:46.850 ","End":"04:51.629","Text":"I’ll go ahead and leave it at 100%."},{"Start":"04:51.629 ","End":"04:52.790","Text":"You’ll also want to make sure that"},{"Start":"04:52.790 ","End":"04:54.660","Text":"you have your visual style in the"},{"Start":"04:54.660 ","End":"04:57.490","Text":"display settings set to “shaded with"},{"Start":"04:57.500 ","End":"05:00.359","Text":"visual edges only” as this will ensure"},{"Start":"05:00.360 ","End":"05:02.170","Text":"that you can see all of the faces"},{"Start":"05:02.170 ","End":"05:04.200","Text":"you have to work within the sculpt"},{"Start":"05:04.200 ","End":"05:06.820","Text":"environment… you definitely don’t want"},{"Start":"05:06.820 ","End":"05:08.820","Text":"your visual style set to “Shaded.”"},{"Start":"05:11.260 ","End":"05:12.810","Text":"The first thing I’m going to do is"},{"Start":"05:12.810 ","End":"05:14.640","Text":"set up symmetry, so we can shape"},{"Start":"05:14.690 ","End":"05:16.730","Text":"one side of the mouse and the other"},{"Start":"05:17.110 ","End":"05:18.559","Text":"will automatically be mirrored."},{"Start":"05:19.330 ","End":"05:21.150","Text":"To do this I’ll select the “mirror”"},{"Start":"05:21.150 ","End":"05:23.689","Text":"option from the “symmetry” drop-down list."},{"Start":"05:25.039 ","End":"05:27.460","Text":"Then we have to select two faces."},{"Start":"05:28.100 ","End":"05:30.060","Text":"So I’ll select one face and you’ll see"},{"Start":"05:30.060 ","End":"05:33.190","Text":"it labeled it number 1… now the second"},{"Start":"05:33.200 ","End":"05:35.550","Text":"face we select is going to determine the"},{"Start":"05:35.550 ","End":"05:38.449","Text":"mirror or symmetry line...so we want this"},{"Start":"05:38.450 ","End":"05:40.449","Text":"mouse to me symmetrical right down the"},{"Start":"05:40.449 ","End":"05:42.830","Text":"middle so I’m going to select the face"},{"Start":"05:42.869 ","End":"05:45.160","Text":"directly across from the first face."},{"Start":"05:46.410 ","End":"05:49.040","Text":"Then, you’ll notice this green symmetry"},{"Start":"05:49.050 ","End":"05:51.810","Text":"line now appears… and that is in fact"},{"Start":"05:51.810 ","End":"05:53.319","Text":"the symmetry line that we’re looking"},{"Start":"05:53.320 ","End":"05:55.830","Text":"for so I’ll go ahead and click okay."},{"Start":"05:57.790 ","End":"05:59.839","Text":"Now you’ll notice that any faces that"},{"Start":"05:59.840 ","End":"06:02.010","Text":"I select are automatically selected on"},{"Start":"06:02.010 ","End":"06:04.560","Text":"the other side of the symmetry line… so"},{"Start":"06:04.560 ","End":"06:07.500","Text":"this is a nice way to save time...be a"},{"Start":"06:07.500 ","End":"06:09.790","Text":"little bit more efficient..and of course"},{"Start":"06:09.820 ","End":"06:11.750","Text":"to ensure that you do have a symmetrical"},{"Start":"06:11.750 ","End":"06:14.599","Text":"shape in the sculpt environment if"},{"Start":"06:14.620 ","End":"06:16.110","Text":"that’s what you’re trying to achieve."},{"Start":"06:18.620 ","End":"06:20.289","Text":"At this point, I’ll want to create"},{"Start":"06:20.290 ","End":"06:22.030","Text":"this rounded hump of the mouse."},{"Start":"06:23.360 ","End":"06:25.390","Text":"I’m going to select the back top"},{"Start":"06:25.400 ","End":"06:27.610","Text":"face of the form...right-click"},{"Start":"06:27.660 ","End":"06:29.269","Text":"and select “edit form”..."},{"Start":"06:29.670 ","End":"06:30.649","Text":"and then I’m going to look"},{"Start":"06:30.650 ","End":"06:32.000","Text":"at it from the right view."},{"Start":"06:32.620 ","End":"06:34.329","Text":"Now one thing I want to point out"},{"Start":"06:34.330 ","End":"06:36.440","Text":"here and I can’t stress this enough..."},{"Start":"06:36.520 ","End":"06:38.280","Text":"Is that you’ll really have to get into"},{"Start":"06:38.280 ","End":"06:39.960","Text":"the habit of looking at your sculpted"},{"Start":"06:39.960 ","End":"06:42.260","Text":"forms from different sides of the view"},{"Start":"06:42.270 ","End":"06:44.950","Text":"cube… this will make it easier to ensure"},{"Start":"06:44.950 ","End":"06:47.630","Text":"you’re selecting the right controls...as"},{"Start":"06:47.630 ","End":"06:49.180","Text":"you’ll see that if I look at it from a"},{"Start":"06:49.219 ","End":"06:51.519","Text":"perspective then I’ll have way too many"},{"Start":"06:51.520 ","End":"06:53.979","Text":"selection options here… and it’s easy"},{"Start":"06:53.980 ","End":"06:55.850","Text":"to accidentally select the wrong one."},{"Start":"06:57.360 ","End":"06:59.349","Text":"So again, looking at it from the right"},{"Start":"06:59.360 ","End":"07:01.390","Text":"view I’m going to select this rounded"},{"Start":"07:01.390 ","End":"07:03.510","Text":"rectangle, which allows us to move"},{"Start":"07:03.520 ","End":"07:06.100","Text":"faces in a planar direction, or in"},{"Start":"07:06.100 ","End":"07:08.120","Text":"this case, we’re adjusting the faces"},{"Start":"07:08.170 ","End":"07:12.950","Text":"along this right YZ plane… so you’ll"},{"Start":"07:12.950 ","End":"07:14.880","Text":"notice as I click and hold with my"},{"Start":"07:14.880 ","End":"07:17.469","Text":"mouse, I can drag this around, and I’m"},{"Start":"07:17.470 ","End":"07:19.120","Text":"just going to pull up to the left a"},{"Start":"07:19.120 ","End":"07:21.420","Text":"bit… and you’ll see that we’re already"},{"Start":"07:21.420 ","End":"07:23.049","Text":"starting to follow the mouse shape."},{"Start":"07:24.700 ","End":"07:27.050","Text":"I can also select the face just to the"},{"Start":"07:27.050 ","End":"07:29.430","Text":"left of this one, without leaving the"},{"Start":"07:29.430 ","End":"07:31.960","Text":"edit form feature, and I can move that"},{"Start":"07:31.960 ","End":"07:33.950","Text":"around until it\u0027s a little bit better."},{"Start":"07:35.710 ","End":"07:37.400","Text":"If you’re new to the sculpt environment"},{"Start":"07:37.420 ","End":"07:38.919","Text":"you’ll find that it’s a lot more"},{"Start":"07:38.920 ","End":"07:40.679","Text":"experimentation than the parametric"},{"Start":"07:40.700 ","End":"07:43.339","Text":"modeling...so you’ll want to get into"},{"Start":"07:43.340 ","End":"07:45.469","Text":"the habit of experimenting and if"},{"Start":"07:45.480 ","End":"07:47.860","Text":"you don’t like something simply hit"},{"Start":"07:47.860 ","End":"07:51.180","Text":"CMD Z on Mac or CTRL + Z on Windows"},{"Start":"07:51.410 ","End":"07:53.510","Text":"to undo the most recent action."},{"Start":"07:55.580 ","End":"07:57.200","Text":"I’m going to look at this from the home"},{"Start":"07:57.210 ","End":"07:59.120","Text":"view to give you another idea of why"},{"Start":"07:59.120 ","End":"08:01.629","Text":"we created this center line of symmetry"},{"Start":"08:01.960 ","End":"08:05.700","Text":"before we started sculpting… so you’ll"},{"Start":"08:05.700 ","End":"08:07.500","Text":"see that it’s a bit easier and we’re"},{"Start":"08:07.510 ","End":"08:09.310","Text":"able to focus on the shape without"},{"Start":"08:09.320 ","End":"08:11.110","Text":"having to worry about the other side."},{"Start":"08:12.790 ","End":"08:14.560","Text":"At this point, I’m liking the overall"},{"Start":"08:14.560 ","End":"08:16.089","Text":"shape of the computer mouse, but"},{"Start":"08:16.090 ","End":"08:17.930","Text":"I want to reshape the front of the"},{"Start":"08:17.930 ","End":"08:19.969","Text":"mouse so it has more of a sharp angle."},{"Start":"08:21.410 ","End":"08:23.770","Text":"If I right-click and select edit form"},{"Start":"08:23.779 ","End":"08:26.130","Text":"on the front face you’ll notice that no"},{"Start":"08:26.140 ","End":"08:28.159","Text":"matter what I do I’m really not getting"},{"Start":"08:28.160 ","End":"08:30.040","Text":"the amount of control that I would like…"},{"Start":"08:30.770 ","End":"08:32.699","Text":"so what I would do in this scenario"},{"Start":"08:32.740 ","End":"08:34.779","Text":"is add another edge or two, giving"},{"Start":"08:34.780 ","End":"08:37.399","Text":"me more faces to control the object."},{"Start":"08:38.589 ","End":"08:40.103","Text":"I’m going to double click on the"},{"Start":"08:40.103 ","End":"08:41.969","Text":"centerline of the mouse because"},{"Start":"08:41.969 ","End":"08:43.439","Text":"double-clicking will select"},{"Start":"08:43.490 ","End":"08:45.760","Text":"the entire line...and then I’m"},{"Start":"08:45.760 ","End":"08:47.900","Text":"going to select “insert edge”"},{"Start":"08:47.950 ","End":"08:49.820","Text":"from the modify dropdown list."},{"Start":"08:50.570 ","End":"08:52.310","Text":"I’m just going to use the slider"},{"Start":"08:52.310 ","End":"08:54.170","Text":"to position the line so it’s above"},{"Start":"08:54.180 ","End":"08:56.719","Text":"the centerline and I’ll click okay."},{"Start":"08:58.180 ","End":"08:59.519","Text":"You’ll notice that right after I"},{"Start":"08:59.520 ","End":"09:01.520","Text":"clicked okay it readjusted the shape"},{"Start":"09:01.580 ","End":"09:03.170","Text":"a bit and essentially cut these"},{"Start":"09:03.170 ","End":"09:05.570","Text":"front faces up into smaller faces."},{"Start":"09:06.980 ","End":"09:09.840","Text":"Now I can Edit Form on this top"},{"Start":"09:09.840 ","End":"09:11.689","Text":"shape and adjust the face size by"},{"Start":"09:11.700 ","End":"09:13.789","Text":"dragging the center manipulator"},{"Start":"09:13.790 ","End":"09:16.360","Text":"around because this icon represents"},{"Start":"09:16.379 ","End":"09:19.360","Text":"universal scaling… so you’ll see"},{"Start":"09:19.360 ","End":"09:21.110","Text":"that we can adjust this to better"},{"Start":"09:21.110 ","End":"09:23.090","Text":"represent this front shape of the mouse."},{"Start":"09:25.450 ","End":"09:26.790","Text":"Alrighty...so now I want to get the"},{"Start":"09:26.800 ","End":"09:29.310","Text":"bottom to be a bit more square like"},{"Start":"09:29.310 ","End":"09:32.180","Text":"the computer mouse reference image… so"},{"Start":"09:32.180 ","End":"09:34.209","Text":"I’m first just going to use the planar"},{"Start":"09:34.209 ","End":"09:36.339","Text":"square to move the faces down a bit"},{"Start":"09:36.340 ","End":"09:38.920","Text":"further… and I’ll do this for the front"},{"Start":"09:38.930 ","End":"09:41.440","Text":"bottom face AND the back bottom face."},{"Start":"09:48.790 ","End":"09:50.900","Text":"Now I would probably spend a little bit"},{"Start":"09:50.900 ","End":"09:52.810","Text":"more time to tweak this side profile"},{"Start":"09:52.859 ","End":"09:55.260","Text":"even further, but for the sake of time"},{"Start":"09:55.280 ","End":"09:57.890","Text":"I’m going to leave it at what it is….and"},{"Start":"09:57.920 ","End":"09:58.151","Text":"let’s take a look at the top of the mouse."},{"Start":"09:58.151 ","End":"10:03.389","Text":"Let’s go ahead and make this mouse"},{"Start":"10:03.420 ","End":"10:05.760","Text":"a bit more ergonomic by adding a"},{"Start":"10:05.760 ","End":"10:08.140","Text":"groove on the side for our thumb."},{"Start":"10:09.009 ","End":"10:10.789","Text":"Looking at the top of the mouse, I’m going"},{"Start":"10:10.789 ","End":"10:14.420","Text":"to select this top-edge and right-click"},{"Start":"10:14.460 ","End":"10:17.370","Text":"and select edit form… and I’m going to"},{"Start":"10:17.370 ","End":"10:20.589","Text":"select the planar direction icon and"},{"Start":"10:20.590 ","End":"10:24.210","Text":"drag it out just a bit… so you’ll see"},{"Start":"10:24.450 ","End":"10:26.720","Text":"looking at it from the back we’re already"},{"Start":"10:26.720 ","End":"10:30.800","Text":"starting to get an indent… I can also"},{"Start":"10:30.800 ","End":"10:32.820","Text":"select the point where all the edges"},{"Start":"10:32.830 ","End":"10:36.151","Text":"meet… and I can use the single-axis arrow"},{"Start":"10:36.151 ","End":"10:36.557","Text":"to move that in...and as always you can"},{"Start":"10:36.557 ","End":"10:37.580","Text":"type in dimensions to control it a bit"},{"Start":"10:37.580 ","End":"10:41.880","Text":"more… I’ll type in 4mm… and it looks"},{"Start":"10:41.880 ","End":"10:44.483","Text":"like the top moved a bit… so I’m going"},{"Start":"10:44.483 ","End":"10:46.659","Text":"to just go back and forth here and move"},{"Start":"10:46.680 ","End":"10:48.670","Text":"each one a bit until I’m happy with the"},{"Start":"10:49.110 ","End":"10:57.960","Text":"shape….and I’m starting to like this"},{"Start":"10:57.980 ","End":"11:00.670","Text":"overall shape so I’m going to click okay."},{"Start":"11:01.910 ","End":"11:03.740","Text":"Now we want to make sure that the"},{"Start":"11:03.740 ","End":"11:05.860","Text":"computer mouse has a flat bottom so"},{"Start":"11:05.860 ","End":"11:07.640","Text":"it will slide on a desk properly..."},{"Start":"11:08.220 ","End":"11:10.170","Text":"so holding down the shift key I’m"},{"Start":"11:10.170 ","End":"11:12.340","Text":"going to select all the bottom faces"},{"Start":"11:12.580 ","End":"11:14.420","Text":"and then I’m going to right-click and"},{"Start":"11:14.420 ","End":"11:16.011","Text":"select crease… and you’ll see that it"},{"Start":"11:16.011 ","End":"11:16.655","Text":"creased all of the edges and made the"},{"Start":"11:16.655 ","End":"11:17.137","Text":"planes flat...and we can round these"},{"Start":"11:17.137 ","End":"11:17.850","Text":"sharp edges over in the model workspace."},{"Start":"11:17.860 ","End":"11:19.760","Text":"You may notice that the edges are"},{"Start":"11:19.780 ","End":"11:22.399","Text":"creased but the bottom isn’t flat yet."},{"Start":"11:22.809 ","End":"11:25.330","Text":"So holding down shift I’ll select the"},{"Start":"11:25.330 ","End":"11:28.190","Text":"two faces again and this time I’ll"},{"Start":"11:28.190 ","End":"11:30.340","Text":"select the “flatten” command from the"},{"Start":"11:30.340 ","End":"11:33.950","Text":"modify dropdown list...now you’ll see the"},{"Start":"11:33.950 ","End":"11:36.610","Text":"shape is completely flat on the bottom."},{"Start":"11:38.030 ","End":"11:39.860","Text":"Now at this point, if you want to make"},{"Start":"11:39.860 ","End":"11:42.349","Text":"the mouse specifically for the left or"},{"Start":"11:42.350 ","End":"11:44.510","Text":"right hand you could turn the symmetry"},{"Start":"11:44.560 ","End":"11:47.550","Text":"off and edit the form on just one side."},{"Start":"11:48.320 ","End":"11:50.469","Text":"To turn the symmetry off simply"},{"Start":"11:50.470 ","End":"11:51.895","Text":"go up to the symmetry dropdown"},{"Start":"11:52.190 ","End":"11:55.030","Text":"list \u003e select “clear symmetry,”"},{"Start":"11:55.750 ","End":"11:58.310","Text":"select the model, and click okay."},{"Start":"11:58.310 ","End":"12:00.550","Text":"I’m going to hit CMD + Z and show"},{"Start":"12:00.550 ","End":"12:06.410","Text":"you another way… which is to select"},{"Start":"12:06.410 ","End":"12:08.580","Text":"the symmetry line first and then if"},{"Start":"12:08.580 ","End":"12:11.480","Text":"I select clear symmetry you’ll see it"},{"Start":"12:11.480 ","End":"12:14.750","Text":"saves that extra step of the dialogue"},{"Start":"12:14.759 ","End":"12:16.649","Text":"box… and this way you can turn off"},{"Start":"12:17.779 ","End":"12:18.765","Text":"a specific line of symmetry if you"},{"Start":"12:18.765 ","End":"12:23.720","Text":"have multiple set up in your model."},{"Start":"12:27.620 ","End":"12:29.619","Text":"At this point, I can right-click on the"},{"Start":"12:29.639 ","End":"12:34.389","Text":"top edge and click edit form and I can"},{"Start":"12:34.389 ","End":"12:36.720","Text":"drag this out a bit more to make this a"},{"Start":"12:36.730 ","End":"12:39.670","Text":"right-handed mouse….and maybe I’ll push"},{"Start":"12:39.670 ","End":"12:45.599","Text":"the back in a bit more… so this is where"},{"Start":"12:45.599 ","End":"12:47.769","Text":"the sculpt workspace can really be fun"},{"Start":"12:47.790 ","End":"12:49.729","Text":"and you can really play around with shapes"},{"Start":"12:49.759 ","End":"12:51.959","Text":"and ideas that would take you way too"},{"Start":"12:51.960 ","End":"12:54.190","Text":"long to create in the model workspace."},{"Start":"12:54.900 ","End":"12:57.200","Text":"Now obviously I did this mouse concept"},{"Start":"12:57.290 ","End":"12:59.770","Text":"fairly fast… so remember that one of the"},{"Start":"12:59.770 ","End":"13:02.599","Text":"most important tips is the more faces"},{"Start":"13:02.700 ","End":"13:05.130","Text":"and edges you have the more control"},{"Start":"13:05.130 ","End":"13:07.240","Text":"you have over that area of the model."},{"Start":"13:08.929 ","End":"13:10.660","Text":"If I’m happy with this shape"},{"Start":"13:10.690 ","End":"13:12.209","Text":"I’ll go ahead and click okay."},{"Start":"13:13.410 ","End":"13:15.610","Text":"I will click “finish form” in the toolbar"},{"Start":"13:15.640 ","End":"13:17.709","Text":"so I can go back to the model workspace."},{"Start":"13:19.570 ","End":"13:22.630","Text":"Now I can take this model a step further"},{"Start":"13:22.639 ","End":"13:24.829","Text":"by using the model tools to really"},{"Start":"13:24.830 ","End":"13:27.100","Text":"define features of the computer mouse,"},{"Start":"13:27.440 ","End":"13:29.960","Text":"including adding the center scroll here."},{"Start":"13:30.520 ","End":"13:36.189","Text":"I can hit the keyboard shortcut"},{"Start":"13:36.190 ","End":"13:38.780","Text":"letter “F” for fillet and select"},{"Start":"13:38.780 ","End":"13:41.330","Text":"the bottom edge and I’ll enter a"},{"Start":"13:41.340 ","End":"13:44.419","Text":"fillet radius of 4mm and click okay."},{"Start":"13:45.520 ","End":"13:47.690","Text":"So that’s all I’m going to show for"},{"Start":"13:47.690 ","End":"13:50.050","Text":"this tutorial, because again like I"},{"Start":"13:50.050 ","End":"13:53.080","Text":"mentioned in Day #22 you really need to"},{"Start":"13:53.090 ","End":"13:55.400","Text":"get used to the basic sculpt commands"},{"Start":"13:55.540 ","End":"13:58.160","Text":"before we take it a step further."}],"ID":29006},{"Watched":false,"Name":"Day 24 - Sculpt a Halloween Pumpkin","Duration":"13m 42s","ChapterTopicVideoID":27803,"CourseChapterTopicPlaylistID":275347,"HasSubtitles":true,"ThumbnailPath":null,"UploadDate":null,"DurationForVideoObject":null,"Description":null,"MetaTitle":null,"MetaDescription":null,"Canonical":null,"VideoComments":[],"Subtitles":[{"Start":"00:00.140 ","End":"00:00.920","Text":"Kevin Kennedy: Hey there, It’s"},{"Start":"00:00.920 ","End":"00:02.900","Text":"Kevin Kennedy, and welcome to Day"},{"Start":"00:02.900 ","End":"00:06.890","Text":"#24 of Learn Fusion 360 in 30 days."},{"Start":"00:07.280 ","End":"00:09.309","Text":"By the end of this tutorial,"},{"Start":"00:09.520 ","End":"00:11.700","Text":"you’ll be able to model a pumpkin"},{"Start":"00:11.759 ","End":"00:13.240","Text":"in the sculpt environment."},{"Start":"00:14.040 ","End":"00:15.520","Text":"We’ll take a look at how to use the"},{"Start":"00:15.549 ","End":"00:18.499","Text":"control point spline, how to select"},{"Start":"00:18.629 ","End":"00:21.400","Text":"through faces, how to use the t-spline"},{"Start":"00:21.800 ","End":"00:23.480","Text":"revolve tool with symmetry, and"},{"Start":"00:23.480 ","End":"00:25.810","Text":"how to thicken the t-spline model."},{"Start":"00:31.599 ","End":"00:33.489","Text":"To get started we’re going to need to"},{"Start":"00:33.530 ","End":"00:35.739","Text":"create the silhouette of the pumpkin"},{"Start":"00:35.750 ","End":"00:37.890","Text":"with the spline tool, and then we’ll"},{"Start":"00:37.920 ","End":"00:40.250","Text":"enter the sculpt environment and revolve"},{"Start":"00:40.250 ","End":"00:42.640","Text":"the t-spline around the center axis."},{"Start":"00:43.970 ","End":"00:45.570","Text":"I’ll start off by creating a"},{"Start":"00:45.580 ","End":"00:47.960","Text":"new component by selecting “new"},{"Start":"00:47.990 ","End":"00:49.970","Text":"component” from the assemble dropdown"},{"Start":"00:49.970 ","End":"00:53.260","Text":"menu...and before I click okay I’ll"},{"Start":"00:53.260 ","End":"00:55.099","Text":"type out “Pumpkin” for the name."},{"Start":"00:56.340 ","End":"00:58.320","Text":"Creating a new component before we do"},{"Start":"00:58.370 ","End":"01:00.780","Text":"any work will simply help prepare for"},{"Start":"01:00.780 ","End":"01:03.060","Text":"the future just in case we want to"},{"Start":"01:03.070 ","End":"01:05.470","Text":"duplicate the pumpkin or insert the"},{"Start":"01:05.470 ","End":"01:07.920","Text":"object into another assembly file."},{"Start":"01:09.219 ","End":"01:11.280","Text":"I’m now going to select “create"},{"Start":"01:11.289 ","End":"01:13.399","Text":"sketch” in the toolbar, and then"},{"Start":"01:13.410 ","End":"01:15.110","Text":"I’ll select the right plane."},{"Start":"01:16.370 ","End":"01:18.399","Text":"To get the spline command I’ll go to"},{"Start":"01:18.400 ","End":"01:21.460","Text":"the sketch dropdown menu, I’ll find the"},{"Start":"01:21.460 ","End":"01:24.580","Text":"spline flyout folder, and I’ll select"},{"Start":"01:24.610 ","End":"01:27.080","Text":"the “control point spline” which is a"},{"Start":"01:27.080 ","End":"01:30.320","Text":"newer feature in Fusion 360...and I think"},{"Start":"01:30.320 ","End":"01:32.220","Text":"you’ll find it’s a little bit easier"},{"Start":"01:32.220 ","End":"01:35.980","Text":"to control than the “fit point spline.”"},{"Start":"01:35.980 ","End":"01:37.560","Text":"I’m going to start by clicking in the"},{"Start":"01:37.570 ","End":"01:39.989","Text":"middle just above the center origin,"},{"Start":"01:40.260 ","End":"01:42.410","Text":"as this is where that bottom cavity"},{"Start":"01:42.410 ","End":"01:45.039","Text":"of a pumpkin will be… and I’m just"},{"Start":"01:45.039 ","End":"01:47.899","Text":"going to add 3 or 4 points by clicking"},{"Start":"01:47.920 ","End":"01:49.910","Text":"in the rough shape of a pumpkin."},{"Start":"01:56.240 ","End":"01:58.409","Text":"Then, you’ll see that the control point"},{"Start":"01:58.980 ","End":"02:00.459","Text":"spline allows us to simply move these"},{"Start":"02:00.469 ","End":"02:02.940","Text":"points around...so it’s a little bit"},{"Start":"02:02.940 ","End":"02:04.670","Text":"simpler to use than the “fit point"},{"Start":"02:04.680 ","End":"02:07.170","Text":"spline” which can only be adjusted"},{"Start":"02:07.170 ","End":"02:09.000","Text":"by dragging the spline handles."},{"Start":"02:10.690 ","End":"02:12.230","Text":"So I’m just going to move these points"},{"Start":"02:12.230 ","End":"02:14.439","Text":"around until I’m happy and it looks"},{"Start":"02:14.440 ","End":"02:17.790","Text":"close enough to a pumpkin silhouette...if"},{"Start":"02:17.800 ","End":"02:19.900","Text":"you really wanted to get a specific"},{"Start":"02:19.900 ","End":"02:21.840","Text":"profile shape you could import a"},{"Start":"02:21.840 ","End":"02:23.389","Text":"pumpkin reference image and trace"},{"Start":"02:23.440 ","End":"02:25.480","Text":"over the shape with the spline tool."},{"Start":"02:27.060 ","End":"02:28.839","Text":"Once I’m done with the spline tool"},{"Start":"02:28.920 ","End":"02:31.000","Text":"I’ll hit “stop sketch” in the toolbar…"},{"Start":"02:31.400 ","End":"02:33.239","Text":"and before I forget about it, I’m"},{"Start":"02:33.240 ","End":"02:35.410","Text":"going to rename the sketch pumpkin"},{"Start":"02:35.730 ","End":"02:39.859","Text":"by double-clicking on it...as it’s"},{"Start":"02:39.860 ","End":"02:42.070","Text":"a good habit to get into, even"},{"Start":"02:42.070 ","End":"02:44.220","Text":"on these quick, smaller projects."},{"Start":"02:45.710 ","End":"02:47.820","Text":"Now we need to enter the t-spline or"},{"Start":"02:47.820 ","End":"02:49.940","Text":"sculpt environment… and you’ll see that"},{"Start":"02:49.940 ","End":"02:51.859","Text":"the only way we can enter the sculpt"},{"Start":"02:51.860 ","End":"02:53.970","Text":"environment is by selecting “create"},{"Start":"02:53.970 ","End":"03:00.769","Text":"form” in the toolbar, otherwise, the"},{"Start":"03:00.780 ","End":"03:02.679","Text":"sculpt environment does not show up"},{"Start":"03:02.700 ","End":"03:04.680","Text":"in your workspaces dropdown list."},{"Start":"03:06.090 ","End":"03:08.320","Text":"After selecting “create form” you’ll"},{"Start":"03:08.330 ","End":"03:10.010","Text":"be in the sculpt workspace, and"},{"Start":"03:10.010 ","End":"03:11.930","Text":"we will need to select the revolve"},{"Start":"03:11.940 ","End":"03:14.489","Text":"command from the create dropdown menu."},{"Start":"03:16.809 ","End":"03:19.449","Text":"Once the revolve dialogue box opens up"},{"Start":"03:19.520 ","End":"03:21.330","Text":"you’ll notice that it’s very similar"},{"Start":"03:21.330 ","End":"03:23.240","Text":"to the revolve command in the model"},{"Start":"03:23.240 ","End":"03:25.260","Text":"workspace, with the exception that"},{"Start":"03:25.260 ","End":"03:27.999","Text":"we’ll be creating a T-spline body which"},{"Start":"03:28.000 ","End":"03:31.790","Text":"is full of faces, not one solid body."},{"Start":"03:33.839 ","End":"03:35.790","Text":"First, I’ll need to select the side"},{"Start":"03:35.799 ","End":"03:37.980","Text":"profile of the pumpkin that we just"},{"Start":"03:37.980 ","End":"03:40.480","Text":"created, and next you’ll see that"},{"Start":"03:40.480 ","End":"03:43.000","Text":"you have to select a center axis."},{"Start":"03:44.380 ","End":"03:46.629","Text":"In this scenario, we’ll simply use the"},{"Start":"03:46.639 ","End":"03:49.630","Text":"center axis from our origin, but you could"},{"Start":"03:49.690 ","End":"03:52.030","Text":"always reference a line that you created"},{"Start":"03:52.389 ","End":"03:55.030","Text":"or a number of different construction axis"},{"Start":"03:55.030 ","End":"03:57.450","Text":"[ax-eez] that you can create in Fusion."},{"Start":"03:59.550 ","End":"04:02.150","Text":"After I select the center axis you’ll"},{"Start":"04:02.150 ","End":"04:04.159","Text":"see it’s already giving me a preview"},{"Start":"04:04.160 ","End":"04:06.970","Text":"of the shape… and before we click okay"},{"Start":"04:06.970 ","End":"04:09.050","Text":"in the revolve dialogue box we’ll want"},{"Start":"04:09.059 ","End":"04:11.000","Text":"to change a few more of the settings…"},{"Start":"04:13.270 ","End":"04:14.940","Text":"If you’ve watched the previous two"},{"Start":"04:14.940 ","End":"04:16.709","Text":"sculpting videos then you’ve heard me"},{"Start":"04:16.709 ","End":"04:18.909","Text":"talk before about the key to success"},{"Start":"04:18.910 ","End":"04:21.369","Text":"when using the sculpt environment...and"},{"Start":"04:21.370 ","End":"04:23.869","Text":"that is that the more faces you have the"},{"Start":"04:23.870 ","End":"04:26.140","Text":"more control you’ll have over your shape."},{"Start":"04:26.880 ","End":"04:28.200","Text":"So we’ll want to increase the"},{"Start":"04:28.200 ","End":"04:30.120","Text":"number of faces here in order to"},{"Start":"04:30.129 ","End":"04:31.740","Text":"have a little bit more control"},{"Start":"04:31.760 ","End":"04:33.410","Text":"over how we shape this pumpkin."},{"Start":"04:36.700 ","End":"04:38.260","Text":"You’ll see that I can create new"},{"Start":"04:38.270 ","End":"04:40.640","Text":"faces two ways… either by dragging"},{"Start":"04:40.640 ","End":"04:44.009","Text":"this blue slider around OR by typing"},{"Start":"04:44.009 ","End":"04:45.999","Text":"out the exact number of faces that"},{"Start":"04:46.000 ","End":"04:48.209","Text":"I would like in the dialogue box."},{"Start":"04:48.219 ","End":"04:50.450","Text":"I’m going to set the number of"},{"Start":"04:50.450 ","End":"04:53.619","Text":"faces to 9...and right above that,"},{"Start":"04:53.630 ","End":"04:54.990","Text":"you’ll see that we can change the"},{"Start":"04:55.000 ","End":"04:57.800","Text":"spacing to curvature or uniform."},{"Start":"04:58.780 ","End":"05:01.520","Text":"Uniform will ensure that all faces are"},{"Start":"05:01.520 ","End":"05:04.399","Text":"a uniform size, whereas the curvature"},{"Start":"05:04.400 ","End":"05:07.110","Text":"selection means the size of the faces"},{"Start":"05:07.110 ","End":"05:09.540","Text":"will adapt to the shape of the object."},{"Start":"05:11.960 ","End":"05:13.620","Text":"For most projects, you’ll find the"},{"Start":"05:13.620 ","End":"05:16.680","Text":"curvature setting to be more useful, so"},{"Start":"05:17.460 ","End":"05:19.439","Text":"I’ll leave it set to curvature for now."},{"Start":"05:20.620 ","End":"05:22.280","Text":"For the type, you’ll see that we"},{"Start":"05:22.280 ","End":"05:23.950","Text":"can change the angle to which our"},{"Start":"05:23.950 ","End":"05:26.469","Text":"shape is revolved around….and we want"},{"Start":"05:26.470 ","End":"05:28.250","Text":"our pumpkin to be solid all the way"},{"Start":"05:28.250 ","End":"05:30.510","Text":"around so I’ll leave it set to “full.”"},{"Start":"05:31.820 ","End":"05:33.429","Text":"Next, you’ll see that we can set"},{"Start":"05:33.429 ","End":"05:35.230","Text":"the number of faces in this other"},{"Start":"05:35.230 ","End":"05:37.269","Text":"direction… and again I can either"},{"Start":"05:37.270 ","End":"05:39.990","Text":"drag the blue slider around or"},{"Start":"05:40.029 ","End":"05:42.309","Text":"type a number in the dialogue box."},{"Start":"05:44.010 ","End":"05:45.390","Text":"I’m going to go ahead and type"},{"Start":"05:45.390 ","End":"05:47.640","Text":"out 14 for the number of faces."},{"Start":"05:51.179 ","End":"05:53.920","Text":"Just below that is the symmetry option."},{"Start":"05:54.730 ","End":"05:56.899","Text":"Now pumpkins are never exactly"},{"Start":"05:56.910 ","End":"05:59.519","Text":"symmetrical, but to help us make the"},{"Start":"05:59.549 ","End":"06:02.130","Text":"individual bulges we’re going to turn"},{"Start":"06:02.360 ","End":"06:05.190","Text":"on the symmetry for now, and then later"},{"Start":"06:05.190 ","End":"06:07.110","Text":"we’ll go ahead and turn it off and"},{"Start":"06:07.390 ","End":"06:09.630","Text":"individually change parts of the pumpkin."},{"Start":"06:10.710 ","End":"06:13.239","Text":"So after I set the symmetry to “circular”"},{"Start":"06:13.580 ","End":"06:15.909","Text":"I’ll change the number of faces to “3”..."},{"Start":"06:16.459 ","End":"06:18.700","Text":"giving us just a bit more control"},{"Start":"06:18.780 ","End":"06:20.240","Text":"and then I will click “okay” to"},{"Start":"06:20.240 ","End":"06:22.140","Text":"confirm all of these settings."},{"Start":"06:24.950 ","End":"06:26.800","Text":"Now that we have our overall shape we’ll"},{"Start":"06:26.800 ","End":"06:28.740","Text":"want to push some of these faces back,"},{"Start":"06:28.790 ","End":"06:30.260","Text":"creating the different ripples that"},{"Start":"06:30.260 ","End":"06:32.330","Text":"appear around the outside of a pumpkin."},{"Start":"06:33.290 ","End":"06:34.909","Text":"I’m going to look at it from the top"},{"Start":"06:34.910 ","End":"06:37.370","Text":"plane… and then while holding down the"},{"Start":"06:37.370 ","End":"06:39.710","Text":"shift key I’m going to start to select"},{"Start":"06:39.710 ","End":"06:41.440","Text":"one of the edges that have symmetry"},{"Start":"06:41.440 ","End":"06:44.759","Text":"applied to it, as indicated by the bright"},{"Start":"06:44.780 ","End":"06:48.330","Text":"green lines… and I will start with the"},{"Start":"06:48.349 ","End":"06:51.160","Text":"second edge and I’ll keep selecting"},{"Start":"06:51.160 ","End":"06:53.570","Text":"them until the bottom edge before it"},{"Start":"06:53.580 ","End":"06:55.680","Text":"starts to wrap underneath the pumpkin."},{"Start":"07:00.800 ","End":"07:03.039","Text":"So once I have them selected you’ll see"},{"Start":"07:03.040 ","End":"07:04.830","Text":"that all the other symmetry lines are"},{"Start":"07:04.830 ","End":"07:07.010","Text":"selected as well… and we’re going to"},{"Start":"07:07.010 ","End":"07:09.750","Text":"have to right-click and select edit form."},{"Start":"07:09.750 ","End":"07:10.186","Text":"If you’re new to sculpting in Fusion"},{"Start":"07:10.186 ","End":"07:10.684","Text":"360 then be sure to check out my"},{"Start":"07:10.684 ","End":"07:11.120","Text":"other short video where I cover what"},{"Start":"07:11.120 ","End":"07:11.556","Text":"all of these edit form icons mean."},{"Start":"07:11.556 ","End":"07:11.868","Text":"I’ll link to that below"},{"Start":"07:11.868 ","End":"07:12.117","Text":"in the video description."},{"Start":"07:12.180 ","End":"07:14.659","Text":"For now, we’ll select the single-axis"},{"Start":"07:14.660 ","End":"07:16.859","Text":"direction arrow… and I’m just going"},{"Start":"07:16.860 ","End":"07:18.620","Text":"to push it back a little bit…."},{"Start":"07:19.860 ","End":"07:22.040","Text":"If I want even more control then I can"},{"Start":"07:22.040 ","End":"07:24.310","Text":"type a number in the dimension box…"},{"Start":"07:24.400 ","End":"07:27.870","Text":"so I’ll type out -16, and click okay."},{"Start":"07:29.719 ","End":"07:31.240","Text":"At this point we’re done with the"},{"Start":"07:31.250 ","End":"07:32.890","Text":"symmetry… so we’ll have to clear"},{"Start":"07:32.890 ","End":"07:34.620","Text":"it out before we go any further."},{"Start":"07:35.600 ","End":"07:37.650","Text":"To clear the symmetry feature simply"},{"Start":"07:37.660 ","End":"07:39.720","Text":"select “clear symmetry” from the"},{"Start":"07:39.720 ","End":"07:42.195","Text":"symmetry dropdown list and then"},{"Start":"07:42.195 ","End":"07:44.582","Text":"select the body and click okay…."},{"Start":"07:44.980 ","End":"07:46.730","Text":"And now you’ll see that we no longer"},{"Start":"07:46.740 ","End":"07:49.050","Text":"have any of our green symmetry lines."},{"Start":"07:52.070 ","End":"07:53.320","Text":"Now the last thing we need"},{"Start":"07:53.320 ","End":"07:54.820","Text":"to do is create the stem."},{"Start":"07:56.250 ","End":"07:58.290","Text":"I’m going to zoom way in on the pumpkin"},{"Start":"07:58.290 ","End":"08:00.120","Text":"shape and double click on the edge"},{"Start":"08:00.120 ","End":"08:02.500","Text":"here because double-clicking will"},{"Start":"08:02.570 ","End":"08:05.099","Text":"automatically select the entire edge."},{"Start":"08:06.540 ","End":"08:09.190","Text":"I’ll right-click and select Edit Form."},{"Start":"08:10.260 ","End":"08:12.049","Text":"I’m going to select the universal"},{"Start":"08:12.060 ","End":"08:14.690","Text":"scaling icon or the center circle."},{"Start":"08:16.270 ","End":"08:18.660","Text":"Before I move anything I’m going to"},{"Start":"08:18.670 ","End":"08:21.619","Text":"hold down the option key on my mac… so"},{"Start":"08:21.620 ","End":"08:23.329","Text":"if you’re on windows be sure to hold"},{"Start":"08:23.330 ","End":"08:26.190","Text":"down the “alt” key and then we’ll drag"},{"Start":"08:26.190 ","End":"08:28.580","Text":"the center circle in about halfway."},{"Start":"08:30.090 ","End":"08:31.900","Text":"I’m going to let go of the Option"},{"Start":"08:31.900 ","End":"08:34.060","Text":"key, then hold the option key"},{"Start":"08:34.060 ","End":"08:35.900","Text":"down once again and drag the"},{"Start":"08:35.909 ","End":"08:37.599","Text":"center circle in a bit further."},{"Start":"08:38.559 ","End":"08:41.189","Text":"Then, with the option/alt key held"},{"Start":"08:41.190 ","End":"08:43.189","Text":"down, I’m going to grab the top"},{"Start":"08:43.240 ","End":"08:45.699","Text":"single-axis arrow and I’m going to"},{"Start":"08:45.700 ","End":"08:49.940","Text":"drag it up… so you’ll see that holding"},{"Start":"08:49.940 ","End":"08:52.189","Text":"down the option/alt key is creating"},{"Start":"08:52.190 ","End":"08:54.620","Text":"these new faces for us so it doesn’t"},{"Start":"08:54.620 ","End":"08:56.800","Text":"mess up all the surrounding faces."},{"Start":"09:05.350 ","End":"09:07.829","Text":"To make the stem a little bit more tapered"},{"Start":"09:07.870 ","End":"09:10.439","Text":"I’ll select the universal scaling icon or"},{"Start":"09:10.440 ","End":"09:12.640","Text":"the center circle and I’ll drag it in a"},{"Start":"09:12.640 ","End":"09:15.699","Text":"bit… this time making sure that I do not"},{"Start":"09:15.719 ","End":"09:18.973","Text":"have option/alt selected on my keyboard."},{"Start":"09:19.080 ","End":"09:21.049","Text":"You can also use the sliders"},{"Start":"09:21.059 ","End":"09:22.589","Text":"to give it a bit of an angle..."},{"Start":"09:23.039 ","End":"09:24.859","Text":"and we can select and hold on the"},{"Start":"09:24.859 ","End":"09:27.289","Text":"planar direction square...and move"},{"Start":"09:27.289 ","End":"09:28.789","Text":"that around to give it more of a"},{"Start":"09:28.789 ","End":"09:31.479","Text":"realistic and not so perfect appearance."},{"Start":"09:33.979 ","End":"09:35.789","Text":"The last thing I’ll do is make"},{"Start":"09:35.789 ","End":"09:37.710","Text":"this pumpkin even more realistic"},{"Start":"09:37.730 ","End":"09:39.660","Text":"by messing up some of the symmetry."},{"Start":"09:40.250 ","End":"09:41.930","Text":"I’m going to look at the pumpkin from"},{"Start":"09:41.930 ","End":"09:44.399","Text":"one of the side views, and then I’m going"},{"Start":"09:44.400 ","End":"09:48.290","Text":"to hit CTRL + 1 on the keyboard, which"},{"Start":"09:48.290 ","End":"09:50.430","Text":"will change the appearance to a “box"},{"Start":"09:50.430 ","End":"09:53.370","Text":"display” mode… and the main advantage"},{"Start":"09:53.389 ","End":"09:55.640","Text":"of this box display mode is that it’s"},{"Start":"09:55.880 ","End":"09:58.109","Text":"easier to select faces of our organic"},{"Start":"09:58.109 ","End":"10:01.390","Text":"shape and it will also run a lot smoother,"},{"Start":"10:01.460 ","End":"10:04.550","Text":"especially if you have an older computer."},{"Start":"10:06.130 ","End":"10:08.699","Text":"Now we’ll want to set a selection filter…"},{"Start":"10:08.719 ","End":"10:10.889","Text":"so I’ll head up to the selection dropdown"},{"Start":"10:10.889 ","End":"10:13.529","Text":"menu...and for the selection priority"},{"Start":"10:13.730 ","End":"10:16.820","Text":"I’ll click on “select face priority” which"},{"Start":"10:16.820 ","End":"10:19.230","Text":"will make sure that we only select faces."},{"Start":"10:21.510 ","End":"10:23.460","Text":"Now if I click and drag with my mouse"},{"Start":"10:23.480 ","End":"10:25.799","Text":"to create a selection window, you’ll"},{"Start":"10:25.799 ","End":"10:28.109","Text":"see that we have one problem… which"},{"Start":"10:28.109 ","End":"10:29.769","Text":"is that it doesn’t select all of"},{"Start":"10:29.769 ","End":"10:31.740","Text":"the faces on the top of the pumpkin."},{"Start":"10:34.770 ","End":"10:37.130","Text":"The easiest thing to do in this situation"},{"Start":"10:37.180 ","End":"10:39.660","Text":"is to activate the “select through”"},{"Start":"10:39.950 ","End":"10:42.599","Text":"selection filter, which will automatically"},{"Start":"10:42.599 ","End":"10:44.880","Text":"select the faces on the other sides"},{"Start":"10:44.889 ","End":"10:46.880","Text":"when we do the selection window."},{"Start":"10:49.260 ","End":"10:55.040","Text":"If I try the selection again, this"},{"Start":"10:55.040 ","End":"10:56.600","Text":"time you’ll see that it did in fact"},{"Start":"10:56.600 ","End":"10:59.210","Text":"work and it selected the entire top."},{"Start":"11:01.780 ","End":"11:03.869","Text":"So I can now right-click and select"},{"Start":"11:03.929 ","End":"11:06.790","Text":"edit form, and I can drag the rotation"},{"Start":"11:06.790 ","End":"11:09.950","Text":"slider a bit and move the planar"},{"Start":"11:09.950 ","End":"11:12.099","Text":"direction square around to make this"},{"Start":"11:12.120 ","End":"11:14.130","Text":"pumpkin a little bit more unique."},{"Start":"11:16.320 ","End":"11:18.420","Text":"After messing with the faces a bit you"},{"Start":"11:18.420 ","End":"11:23.119","Text":"can click okay and hit CONTROL + 3 to"},{"Start":"11:23.119 ","End":"11:25.760","Text":"revert back to the normal “smooth” mode."},{"Start":"11:28.630 ","End":"11:30.050","Text":"To wrap up this tutorial there are"},{"Start":"11:30.050 ","End":"11:31.740","Text":"a few quick things we’ll want to do."},{"Start":"11:32.200 ","End":"11:33.749","Text":"First off, we’ll want to fill the"},{"Start":"11:33.760 ","End":"11:35.570","Text":"gap in the stem of the pumpkin."},{"Start":"11:36.679 ","End":"11:38.949","Text":"In some t-spline scenarios, we would"},{"Start":"11:38.960 ","End":"11:41.109","Text":"be able to use the “fill hole” modify"},{"Start":"11:41.109 ","End":"11:44.209","Text":"command, but unfortunately, if you moved"},{"Start":"11:44.220 ","End":"11:46.020","Text":"your stem around it’s going to cause"},{"Start":"11:46.180 ","End":"11:48.400","Text":"intersecting t-spline errors which won’t"},{"Start":"11:48.440 ","End":"11:50.900","Text":"let us convert this model to a solid body."},{"Start":"11:52.050 ","End":"11:54.069","Text":"Therefore, I’ll make sure my selection"},{"Start":"11:54.179 ","End":"11:55.920","Text":"filters are reset to normal..."},{"Start":"11:57.719 ","End":"11:58.779","Text":"and I’ll double click to"},{"Start":"11:58.779 ","End":"12:00.680","Text":"select on the stem edge."},{"Start":"12:01.860 ","End":"12:04.150","Text":"I’ll right-click and select “edit form”"},{"Start":"12:04.540 ","End":"12:06.710","Text":"and I’m going to hold down the option/alt"},{"Start":"12:06.730 ","End":"12:09.440","Text":"key and drag the universal scale icon"},{"Start":"12:09.770 ","End":"12:12.630","Text":"just a bit so it rounds over the edges."},{"Start":"12:13.700 ","End":"12:16.130","Text":"I’ll release the option/alt key and"},{"Start":"12:16.130 ","End":"12:18.689","Text":"then I will hold down option/alt again"},{"Start":"12:19.020 ","End":"12:21.199","Text":"and drag the universal scale icon in"},{"Start":"12:21.210 ","End":"12:25.000","Text":"further… this time I’ll type out 0"},{"Start":"12:25.000 ","End":"12:27.460","Text":"in the dimension box which will close"},{"Start":"12:27.460 ","End":"12:30.339","Text":"off the top of the stem… and I can"},{"Start":"12:30.340 ","End":"12:32.470","Text":"click okay to confirm the results."},{"Start":"12:34.190 ","End":"12:37.229","Text":"As of now, the model doesn’t have any"},{"Start":"12:37.230 ","End":"12:38.118","Text":"thickness to it...so the last thing"},{"Start":"12:38.118 ","End":"12:38.145","Text":"we’ll want to do is head to the patch"},{"Start":"12:38.145 ","End":"12:38.159","Text":"workspace...and then use the “thicken”"},{"Start":"12:38.159 ","End":"12:38.177","Text":"command from the create dropdown list."},{"Start":"12:38.177 ","End":"12:38.200","Text":"Now there is a thicken command in the"},{"Start":"12:38.200 ","End":"12:38.221","Text":"sculpt workspace, but they do work a"},{"Start":"12:38.221 ","End":"12:38.238","Text":"little bit differently, and that will"},{"Start":"12:38.238 ","End":"12:38.259","Text":"have to be another video… but you’ll"},{"Start":"12:38.259 ","End":"12:38.273","Text":"find the patch workspace thicken"},{"Start":"12:38.273 ","End":"12:38.294","Text":"command to be a better feature when"},{"Start":"12:38.294 ","End":"12:38.314","Text":"you’re trying to create a solid body."},{"Start":"12:38.314 ","End":"12:38.332","Text":"After selecting thicken in the create"},{"Start":"12:38.332 ","End":"12:38.355","Text":"menu, you’ll have to select the body to"},{"Start":"12:38.355 ","End":"12:38.373","Text":"thicken and then enter the thickness...so"},{"Start":"12:38.373 ","End":"12:38.393","Text":"I’ll just enter 4mm for the direction."},{"Start":"12:38.393 ","End":"12:38.417","Text":"Now you’ll see that we have a mesh"},{"Start":"12:38.417 ","End":"12:38.437","Text":"body and solid body in the Fusion"},{"Start":"12:38.437 ","End":"12:38.455","Text":"360 browser… which will give you"},{"Start":"12:38.455 ","End":"12:38.475","Text":"options to either work with the mesh"},{"Start":"12:38.475 ","End":"12:38.493","Text":"tools or the solid modeling tools."},{"Start":"12:38.493 ","End":"12:38.513","Text":"[Now if I select “finish form” in"},{"Start":"12:38.513 ","End":"12:38.531","Text":"the toolbar, it will convert this"},{"Start":"12:38.531 ","End":"12:38.549","Text":"t-spline model into a solid body."},{"Start":"12:38.549 ","End":"12:38.572","Text":"If you use the solid body you could"},{"Start":"12:38.572 ","End":"12:38.589","Text":"modify it further, maybe with some"},{"Start":"12:38.589 ","End":"12:38.610","Text":"custom text, or you could carve a"},{"Start":"12:38.610 ","End":"12:38.630","Text":"design on the side of the pumpkin."},{"Start":"12:38.630 ","End":"12:38.642","Text":"Alternatively, you could tweak"},{"Start":"12:38.642 ","End":"12:38.660","Text":"the mesh even further in the"},{"Start":"12:38.660 ","End":"12:38.671","Text":"sculpt or patch environments."},{"Start":"12:38.671 ","End":"12:38.692","Text":"As of now, this t-spline model doesn’t"},{"Start":"12:38.692 ","End":"12:39.340","Text":"have any thickness to it...so before"},{"Start":"12:39.340 ","End":"12:41.540","Text":"we hit “finish form” to convert it to a"},{"Start":"12:41.540 ","End":"12:44.600","Text":"solid body, we’ll use the thicken command"},{"Start":"12:45.020 ","End":"12:47.910","Text":"located under the modify dropdown list."},{"Start":"12:48.790 ","End":"12:50.640","Text":"Then, I’ll have to select the"},{"Start":"12:50.640 ","End":"12:53.059","Text":"t-spline body, I’ll change the"},{"Start":"12:53.109 ","End":"12:55.480","Text":"thicken type to soft, and I’ll"},{"Start":"12:55.510 ","End":"12:58.290","Text":"type out 4mm for the thickness."},{"Start":"13:00.340 ","End":"13:01.760","Text":"If we look at the body in the"},{"Start":"13:01.760 ","End":"13:03.850","Text":"Fusion 360 browser you’ll see"},{"Start":"13:04.020 ","End":"13:06.069","Text":"it’s still a T-spline body."},{"Start":"13:06.719 ","End":"13:08.680","Text":"To convert it to a solid I’ll hit"},{"Start":"13:08.719 ","End":"13:11.210","Text":"“finish form” in the toolbar and it"},{"Start":"13:11.219 ","End":"13:13.450","Text":"may take a few seconds to convert."},{"Start":"13:14.540 ","End":"13:17.430","Text":"Then, I’ll turn on the section analysis"},{"Start":"13:17.450 ","End":"13:18.940","Text":"to show you the thickness that we"},{"Start":"13:18.940 ","End":"13:21.129","Text":"just created with the thicken command."},{"Start":"13:23.259 ","End":"13:25.710","Text":"Now that the pumpkin is a solid body"},{"Start":"13:25.770 ","End":"13:27.920","Text":"you can use the model tools to carve"},{"Start":"13:27.920 ","End":"13:31.170","Text":"a design into the side OR you could"},{"Start":"13:31.180 ","End":"13:33.100","Text":"double click on the sculpt icon in"},{"Start":"13:33.100 ","End":"13:35.840","Text":"the timeline below to further edit the"},{"Start":"13:35.850 ","End":"13:38.370","Text":"t-spline body in the sculpt workspace."}],"ID":29007},{"Watched":false,"Name":"Day 25 - Intro to Assemblies and Joints","Duration":"14m 19s","ChapterTopicVideoID":28240,"CourseChapterTopicPlaylistID":275347,"HasSubtitles":true,"ThumbnailPath":null,"UploadDate":null,"DurationForVideoObject":null,"Description":null,"MetaTitle":null,"MetaDescription":null,"Canonical":null,"VideoComments":[],"Subtitles":[{"Start":"00:00.100 ","End":"00:00.980","Text":"Kevin Kennedy: Hey there, It’s"},{"Start":"00:00.980 ","End":"00:03.050","Text":"Kevin Kennedy, and welcome to Day"},{"Start":"00:03.050 ","End":"00:06.900","Text":"#25 of Learn Fusion 360 in 30 days."},{"Start":"00:07.480 ","End":"00:10.040","Text":"By the end of this tutorial, you’ll be"},{"Start":"00:10.040 ","End":"00:12.410","Text":"able to assemble components together to"},{"Start":"00:12.410 ","End":"00:15.100","Text":"represent functional and moving products."},{"Start":"00:15.900 ","End":"00:17.929","Text":"We’ll take a look at how to set up joints"},{"Start":"00:18.080 ","End":"00:21.220","Text":"and as-built joints, we’ll talk about the"},{"Start":"00:21.230 ","End":"00:25.430","Text":"difference, and we’ll add rigid, sliding,"},{"Start":"00:25.470 ","End":"00:27.639","Text":"and some other motions to our joints."},{"Start":"00:28.080 ","End":"00:29.460","Text":"For this tutorial, I’m going"},{"Start":"00:29.460 ","End":"00:31.089","Text":"to use one of the sample files"},{"Start":"00:31.119 ","End":"00:32.889","Text":"located in the data panel."},{"Start":"00:33.839 ","End":"00:36.199","Text":"Open up your data panel by clicking on the"},{"Start":"00:36.210 ","End":"00:39.720","Text":"grid icon, scroll down until you see the"},{"Start":"00:39.720 ","End":"00:42.290","Text":"samples section...and then double click"},{"Start":"00:42.330 ","End":"00:45.809","Text":"on the “basic training folder.” Then,"},{"Start":"00:45.840 ","End":"00:49.040","Text":"find folder #6, which contains assembly"},{"Start":"00:49.040 ","End":"00:51.339","Text":"practice files, and we’ll double click"},{"Start":"00:51.339 ","End":"00:54.460","Text":"to open file #6 which is a camera tripod."},{"Start":"00:56.300 ","End":"00:59.390","Text":"Once the camera tripod file is open you’ll"},{"Start":"00:59.390 ","End":"01:01.920","Text":"notice that it’s a read-only file, as"},{"Start":"01:01.930 ","End":"01:04.300","Text":"stated at the top of the toolbar here."},{"Start":"01:05.389 ","End":"01:08.660","Text":"So we’ll have to click on file \u003e save as"},{"Start":"01:08.849 ","End":"01:10.830","Text":"\u003e and then you can rename the file if you’d"},{"Start":"01:10.830 ","End":"01:13.530","Text":"like as well as choose a new location"},{"Start":"01:13.530 ","End":"01:17.320","Text":"for the copied file...then clicking the"},{"Start":"01:17.320 ","End":"01:19.610","Text":"blue save button will copy the file for"},{"Start":"01:19.610 ","End":"01:22.089","Text":"us… so now we can play around with the"},{"Start":"01:22.090 ","End":"01:24.289","Text":"file and actually make changes to it."},{"Start":"01:26.139 ","End":"01:28.509","Text":"Before we start adding joints and motion"},{"Start":"01:28.510 ","End":"01:30.460","Text":"to our model let’s take a look at a few"},{"Start":"01:30.469 ","End":"01:32.140","Text":"things that you’ll need to understand"},{"Start":"01:32.430 ","End":"01:34.530","Text":"in order to understand assemblies."},{"Start":"01:37.440 ","End":"01:39.420","Text":"First off, you’ll notice in the Fusion"},{"Start":"01:39.420 ","End":"01:41.800","Text":"360 browser on the left-hand side.."},{"Start":"01:41.990 ","End":"01:43.970","Text":"that all of these parts in the assembly"},{"Start":"01:43.970 ","End":"01:46.160","Text":"file are made up of components."},{"Start":"01:46.160 ","End":"01:46.977","Text":"Now if you’re not familiar with the"},{"Start":"01:46.977 ","End":"01:47.561","Text":"difference between Fusion 360 components"},{"Start":"01:47.561 ","End":"01:48.495","Text":"and bodies, then be sure to check out"},{"Start":"01:48.495 ","End":"01:49.313","Text":"my other video in the description below."},{"Start":"01:49.430 ","End":"01:51.710","Text":"Fusion 360 treats components as"},{"Start":"01:51.710 ","End":"01:54.470","Text":"real-world manufactured parts...and"},{"Start":"01:54.470 ","End":"01:56.219","Text":"because of this, you’ll only be"},{"Start":"01:56.220 ","End":"01:58.330","Text":"able to apply joints and motion to"},{"Start":"01:58.330 ","End":"02:01.650","Text":"components...they won’t work on bodies."},{"Start":"02:03.380 ","End":"02:05.690","Text":"Next, let’s head down to the timeline"},{"Start":"02:05.699 ","End":"02:07.530","Text":"and click on the red icon, which"},{"Start":"02:07.530 ","End":"02:10.170","Text":"represents a grounded component, and"},{"Start":"02:10.170 ","End":"02:12.100","Text":"hit the delete key on your keyboard."},{"Start":"02:12.920 ","End":"02:14.310","Text":"We’ll talk more about grounding"},{"Start":"02:14.310 ","End":"02:17.049","Text":"components in just a bit… but for now,"},{"Start":"02:17.080 ","End":"02:19.710","Text":"let’s take a look at the model itself."},{"Start":"02:21.650 ","End":"02:24.049","Text":"The tripod appears to be pieced together,"},{"Start":"02:24.070 ","End":"02:26.140","Text":"but if I click and drag on a part,"},{"Start":"02:26.180 ","End":"02:27.870","Text":"you’ll notice that I can drag each one"},{"Start":"02:27.870 ","End":"02:30.380","Text":"of the components around freely… so"},{"Start":"02:30.380 ","End":"02:32.270","Text":"they’re really not joined together and"},{"Start":"02:32.270 ","End":"02:33.789","Text":"of course, that’s what I’m going to"},{"Start":"02:33.790 ","End":"02:35.589","Text":"show you how to do in this video lesson."},{"Start":"02:36.889 ","End":"02:38.800","Text":"Now the first tip for those of you new"},{"Start":"02:38.800 ","End":"02:40.680","Text":"to assemblies is when you move something"},{"Start":"02:40.680 ","End":"02:42.580","Text":"around but decide that you want it to"},{"Start":"02:42.590 ","End":"02:45.190","Text":"go back to its original location, you"},{"Start":"02:45.190 ","End":"02:48.140","Text":"can select “revert” in the toolbar or in"},{"Start":"02:48.140 ","End":"02:50.309","Text":"the position dropdown list...and you’ll"},{"Start":"02:50.309 ","End":"02:52.630","Text":"notice that selecting revert moves the"},{"Start":"02:52.630 ","End":"02:55.049","Text":"component back to its original position."},{"Start":"02:55.049 ","End":"02:55.940","Text":"I’m going to hit undo, or CMD + Z"},{"Start":"02:55.940 ","End":"02:56.609","Text":"on my keyboard, until the pieces"},{"Start":"02:56.609 ","End":"02:57.388","Text":"of the model are back in place."},{"Start":"02:57.500 ","End":"02:59.649","Text":"Now in order to see the middle components"},{"Start":"02:59.650 ","End":"03:02.200","Text":"of the tripod, I’ll zoom in...and I’m"},{"Start":"03:02.200 ","End":"03:04.830","Text":"going to click and drag the red stand"},{"Start":"03:06.180 ","End":"03:09.690","Text":"over to the right and I’ll also click"},{"Start":"03:09.740 ","End":"03:12.210","Text":"and drag the camera mount to the right."},{"Start":"03:13.840 ","End":"03:15.490","Text":"You can now see some of the other key"},{"Start":"03:15.490 ","End":"03:17.700","Text":"components of this tripod assembly."},{"Start":"03:18.299 ","End":"03:20.230","Text":"In order to make sure these two pieces"},{"Start":"03:20.230 ","End":"03:22.380","Text":"we just moved don’t get reverted back"},{"Start":"03:22.380 ","End":"03:24.059","Text":"to their original position, we’ll"},{"Start":"03:24.060 ","End":"03:26.060","Text":"want to click “capture position”"},{"Start":"03:26.080 ","End":"03:28.640","Text":"in the toolbar or from the position"},{"Start":"03:28.640 ","End":"03:31.089","Text":"dropdown list, which will capture the"},{"Start":"03:31.090 ","End":"03:33.579","Text":"current position of all components."},{"Start":"03:36.190 ","End":"03:38.010","Text":"The capture position feature is"},{"Start":"03:38.010 ","End":"03:39.840","Text":"parametric, meaning that it is a part"},{"Start":"03:39.840 ","End":"03:42.160","Text":"of the order of feature and can be used"},{"Start":"03:42.170 ","End":"03:44.330","Text":"to create additional features later on."},{"Start":"03:45.059 ","End":"03:46.779","Text":"You’ll notice that the capture position"},{"Start":"03:46.780 ","End":"03:49.700","Text":"icon is now located in the timeline below,"},{"Start":"03:50.200 ","End":"03:52.709","Text":"and if you rollback the design, the parts"},{"Start":"03:52.709 ","End":"03:55.250","Text":"move back to their previous position...and"},{"Start":"03:55.250 ","End":"03:57.680","Text":"if I roll the timeline forward, the"},{"Start":"03:57.680 ","End":"04:00.000","Text":"parts return back to their new position."},{"Start":"04:02.170 ","End":"04:03.470","Text":"The next thing we’re going to do is"},{"Start":"04:03.470 ","End":"04:06.509","Text":"discuss what grounding a component does."},{"Start":"04:06.860 ","End":"04:08.609","Text":"I’m going to zoom in on the top of"},{"Start":"04:08.620 ","End":"04:10.490","Text":"the tripod, and if we look at this"},{"Start":"04:10.640 ","End":"04:13.000","Text":"part of the stand, you’ll see that"},{"Start":"04:13.000 ","End":"04:15.230","Text":"this piece has the leg joints and"},{"Start":"04:15.230 ","End":"04:18.340","Text":"the joint for the camera mount… so"},{"Start":"04:18.340 ","End":"04:20.300","Text":"because we’ll be applying a number"},{"Start":"04:20.300 ","End":"04:22.320","Text":"of different joints to this specific"},{"Start":"04:22.320 ","End":"04:24.359","Text":"component we’ll want to ground this"},{"Start":"04:24.370 ","End":"04:26.650","Text":"piece so we don’t accidentally move it."},{"Start":"04:27.410 ","End":"04:29.530","Text":"Now, this is the important part...To"},{"Start":"04:29.530 ","End":"04:31.150","Text":"ground a component you’ll have to"},{"Start":"04:31.150 ","End":"04:33.240","Text":"ground the lowest level component."},{"Start":"04:33.750 ","End":"04:36.420","Text":"So for this example, this piece is"},{"Start":"04:36.460 ","End":"04:38.860","Text":"a subassembly so I’ll have to toggle"},{"Start":"04:38.880 ","End":"04:43.020","Text":"open the stand subassembly...and then"},{"Start":"04:43.070 ","End":"04:46.239","Text":"I can right-click on the “component25”"},{"Start":"04:46.559 ","End":"04:48.940","Text":"and select “ground,” which is"},{"Start":"04:48.940 ","End":"04:51.190","Text":"located near the top of the list."},{"Start":"04:52.550 ","End":"04:54.720","Text":"Now if I try to select this component"},{"Start":"04:54.760 ","End":"04:56.680","Text":"and move it, you’ll see that it is"},{"Start":"04:56.680 ","End":"04:59.440","Text":"in fact grounded or frozen in place."},{"Start":"05:00.980 ","End":"05:02.680","Text":"Typically you’ll find it helpful to"},{"Start":"05:02.680 ","End":"05:04.780","Text":"ground at least one component in your"},{"Start":"05:04.780 ","End":"05:07.059","Text":"assembly...although this is certainly"},{"Start":"05:07.060 ","End":"05:08.700","Text":"not something that is required."},{"Start":"05:10.370 ","End":"05:11.810","Text":"Now that we have part of the stand"},{"Start":"05:11.810 ","End":"05:13.310","Text":"grounded, we’ll want to add some"},{"Start":"05:13.310 ","End":"05:15.220","Text":"joints to the legs of the tripod."},{"Start":"05:15.760 ","End":"05:17.710","Text":"If I select the “assemble” dropdown"},{"Start":"05:17.719 ","End":"05:19.849","Text":"list, you’ll notice that Fusion 360"},{"Start":"05:19.860 ","End":"05:21.840","Text":"has two different types of Joints."},{"Start":"05:22.609 ","End":"05:24.079","Text":"We have joints and we"},{"Start":"05:24.080 ","End":"05:25.720","Text":"have As-built joints."},{"Start":"05:27.820 ","End":"05:29.910","Text":"Both of these joints have 7 different"},{"Start":"05:29.920 ","End":"05:32.109","Text":"types of joints that can be created,"},{"Start":"05:32.590 ","End":"05:34.279","Text":"but it’s important that you leverage"},{"Start":"05:34.300 ","End":"05:36.180","Text":"the correct type of joint to help save"},{"Start":"05:36.180 ","End":"05:38.179","Text":"you time and streamline your workflow."},{"Start":"05:39.580 ","End":"05:41.679","Text":"Put simply, As-Built joints are"},{"Start":"05:41.680 ","End":"05:42.970","Text":"used when the components are"},{"Start":"05:43.000 ","End":"05:44.920","Text":"already in the correct position,"},{"Start":"05:45.220 ","End":"05:47.050","Text":"yet they need to be joined together."},{"Start":"05:48.040 ","End":"05:50.120","Text":"As-built joints are most commonly"},{"Start":"05:50.120 ","End":"05:52.040","Text":"used when creating an assembly with"},{"Start":"05:52.090 ","End":"05:54.579","Text":"imported geometry from an existing"},{"Start":"05:54.580 ","End":"05:58.449","Text":"model, such as our use case, or if"},{"Start":"05:58.449 ","End":"06:00.740","Text":"you built your design with a top-down"},{"Start":"06:00.740 ","End":"06:02.710","Text":"approach, where the components were"},{"Start":"06:02.720 ","End":"06:05.930","Text":"built in place, touching or relative"},{"Start":"06:05.930 ","End":"06:07.740","Text":"to each other, which means they do"},{"Start":"06:07.740 ","End":"06:09.890","Text":"not need to be moved into position."},{"Start":"06:11.160 ","End":"06:13.130","Text":"Contrary, Joints are used when"},{"Start":"06:13.130 ","End":"06:15.090","Text":"Fusion 360 components need to be"},{"Start":"06:15.090 ","End":"06:17.359","Text":"assembled together, but the parts"},{"Start":"06:17.400 ","End":"06:19.150","Text":"are not in their current position."},{"Start":"06:19.810 ","End":"06:21.490","Text":"Later on, when we use the joint"},{"Start":"06:21.490 ","End":"06:22.760","Text":"command, you’ll notice that the"},{"Start":"06:22.770 ","End":"06:24.530","Text":"first component selected moves to"},{"Start":"06:24.530 ","End":"06:26.310","Text":"the second component that we select,"},{"Start":"06:26.800 ","End":"06:29.260","Text":"which allows us to define position"},{"Start":"06:29.309 ","End":"06:31.590","Text":"and a relative motion all at once."},{"Start":"06:32.530 ","End":"06:34.450","Text":"If I zoom out a bit and we take a look"},{"Start":"06:34.450 ","End":"06:36.510","Text":"at our model you’ll notice that most"},{"Start":"06:36.520 ","End":"06:38.530","Text":"of our tripod here is already in the"},{"Start":"06:38.530 ","End":"06:41.270","Text":"correct position, therefore we’ll be using"},{"Start":"06:41.330 ","End":"06:43.460","Text":"as-built joints for these components."},{"Start":"06:45.370 ","End":"06:47.090","Text":"On the other hand, we’ll need to"},{"Start":"06:47.090 ","End":"06:49.160","Text":"use joints when we go to assemble"},{"Start":"06:49.160 ","End":"06:51.380","Text":"these pieces that we moved away"},{"Start":"06:51.380 ","End":"06:52.650","Text":"from the main tripod assembly."},{"Start":"06:54.480 ","End":"06:56.650","Text":"Let’s go ahead and use an “as-built"},{"Start":"06:56.660 ","End":"06:58.530","Text":"joint” to join the legs together."},{"Start":"06:59.490 ","End":"07:01.600","Text":"I’ll select “as-built Joint” from the"},{"Start":"07:01.600 ","End":"07:03.840","Text":"assemble dropdown menu, or by hitting"},{"Start":"07:03.840 ","End":"07:06.869","Text":"the keyboard shortcut SHIFT + J."},{"Start":"07:07.700 ","End":"07:09.559","Text":"Then, before I select any of the"},{"Start":"07:09.639 ","End":"07:11.759","Text":"components I’ll set the motion type."},{"Start":"07:12.490 ","End":"07:14.260","Text":"If I open up the dropdown list"},{"Start":"07:14.270 ","End":"07:15.860","Text":"you’ll see that Fusion 360"},{"Start":"07:15.900 ","End":"07:18.210","Text":"currently offers 7 types of motion."},{"Start":"07:19.020 ","End":"07:20.880","Text":"We want the poles of the tripod to be"},{"Start":"07:20.880 ","End":"07:23.239","Text":"able to slide within one another, so we’ll"},{"Start":"07:23.240 ","End":"07:26.010","Text":"select “slider” from the list of options."},{"Start":"07:27.400 ","End":"07:28.880","Text":"Now I can select the two"},{"Start":"07:28.880 ","End":"07:30.569","Text":"cylinders that make up the legs."},{"Start":"07:30.680 ","End":"07:32.880","Text":"I’ll select the lower gray tube first,"},{"Start":"07:32.900 ","End":"07:34.660","Text":"and then I’ll select the white tube."},{"Start":"07:35.530 ","End":"07:37.400","Text":"After selecting both tubes you’ll"},{"Start":"07:37.400 ","End":"07:38.539","Text":"notice that we now have the"},{"Start":"07:38.540 ","End":"07:40.770","Text":"position option in the dialog box."},{"Start":"07:42.009 ","End":"07:44.050","Text":"To set the position of the slider"},{"Start":"07:44.050 ","End":"07:45.920","Text":"motion I’ll select the bottom"},{"Start":"07:45.920 ","End":"07:48.140","Text":"circular edge of the white tube…."},{"Start":"07:48.590 ","End":"07:50.420","Text":"And you’ll notice it gives us a nice"},{"Start":"07:50.440 ","End":"07:52.660","Text":"preview of the motion to help ensure"},{"Start":"07:52.660 ","End":"07:54.270","Text":"that we’re setting it up correctly."},{"Start":"07:55.570 ","End":"07:57.459","Text":"Looking at the preview everything"},{"Start":"07:57.460 ","End":"07:59.599","Text":"looks good, so I’ll click okay."},{"Start":"08:02.980 ","End":"08:05.369","Text":"One thing to note before we move on… is"},{"Start":"08:05.369 ","End":"08:07.500","Text":"that you’ll notice that the as-built joint"},{"Start":"08:07.510 ","End":"08:10.210","Text":"we just created was also automatically"},{"Start":"08:10.210 ","End":"08:13.350","Text":"applied to these other two legs because"},{"Start":"08:13.350 ","End":"08:15.170","Text":"they were copied from the original."},{"Start":"08:16.300 ","End":"08:18.330","Text":"In other words, all three legs are"},{"Start":"08:18.370 ","End":"08:21.749","Text":"instances of the same subassembly."},{"Start":"08:21.750 ","End":"08:23.880","Text":"So fortunately for us, Fusion 360"},{"Start":"08:23.889 ","End":"08:25.940","Text":"is smart enough to apply joints to"},{"Start":"08:26.050 ","End":"08:28.210","Text":"all instances that are the same."},{"Start":"08:30.510 ","End":"08:32.230","Text":"Next, we’ll want to add an"},{"Start":"08:32.240 ","End":"08:34.159","Text":"as-built joint to the end caps"},{"Start":"08:34.179 ","End":"08:35.990","Text":"so they can’t be moved around."},{"Start":"08:36.630 ","End":"08:38.940","Text":"I’ll hit SHIFT + J on the keyboard"},{"Start":"08:38.940 ","End":"08:41.180","Text":"to call the as-built joint and then I"},{"Start":"08:41.180 ","End":"08:43.559","Text":"will change the motion type to “rigid.”"},{"Start":"08:51.170 ","End":"08:53.309","Text":"And you’ll notice that rigid is first"},{"Start":"08:53.309 ","End":"08:55.029","Text":"on the list because this joint type"},{"Start":"08:55.070 ","End":"08:57.855","Text":"is used most often in Fusion 360 and"},{"Start":"08:58.090 ","End":"08:59.809","Text":"the engineers have gone ahead and"},{"Start":"08:59.820 ","End":"09:01.830","Text":"organized this motion list based on the"},{"Start":"09:01.830 ","End":"09:04.569","Text":"frequency that the motion types are used."},{"Start":"09:05.890 ","End":"09:08.450","Text":"Now, I’ll need to select the end cap and"},{"Start":"09:08.450 ","End":"09:10.890","Text":"then the gray leg… and I’ll click okay."},{"Start":"09:11.389 ","End":"09:13.499","Text":"You’ll also see that the end caps were"},{"Start":"09:13.509 ","End":"09:15.540","Text":"also part of a subassembly with the"},{"Start":"09:15.540 ","End":"09:18.270","Text":"same instances so this rigid joint that"},{"Start":"09:18.270 ","End":"09:20.120","Text":"we just applied was also automatically"},{"Start":"09:20.120 ","End":"09:22.270","Text":"applied to the other 2 instances."},{"Start":"09:23.670 ","End":"09:24.930","Text":"Now we’ll want to add a"},{"Start":"09:24.930 ","End":"09:26.790","Text":"joint to the top of the leg."},{"Start":"09:26.940 ","End":"09:28.960","Text":"I’ll zoom in a bit so it’s easier to see…"},{"Start":"09:29.400 ","End":"09:31.670","Text":"then I’ll right-click and select “repeat"},{"Start":"09:31.719 ","End":"09:34.630","Text":"as-built joint.” You’ll see that Ridgid is"},{"Start":"09:34.630 ","End":"09:36.930","Text":"still selected because we used that last,"},{"Start":"09:36.959 ","End":"09:39.300","Text":"so all we have to do is select the top end"},{"Start":"09:39.300 ","End":"09:42.010","Text":"cap and the white cylinder and click okay."},{"Start":"09:43.370 ","End":"09:45.550","Text":"I’ll now right-click once again and"},{"Start":"09:45.550 ","End":"09:47.539","Text":"select “repeat as-built joint”… and"},{"Start":"09:47.540 ","End":"09:49.370","Text":"we’re going to repeat the same steps"},{"Start":"09:49.420 ","End":"09:51.629","Text":"to connect the arched connector"},{"Start":"09:52.010 ","End":"09:53.300","Text":"that’s kind’ve hidden here..."},{"Start":"09:53.740 ","End":"09:59.030","Text":"to the top of the cap… and after selecting"},{"Start":"09:59.030 ","End":"10:01.520","Text":"each I’ll click okay in the dialog box."},{"Start":"10:03.250 ","End":"10:04.539","Text":"The next joint we’ll want to"},{"Start":"10:04.540 ","End":"10:06.630","Text":"add is the revolute motion that"},{"Start":"10:06.630 ","End":"10:08.339","Text":"will allow this top connector to"},{"Start":"10:08.340 ","End":"10:10.629","Text":"move along the stand piece here."},{"Start":"10:11.660 ","End":"10:13.689","Text":"I’ll right-click and select “repeat"},{"Start":"10:13.710 ","End":"10:15.890","Text":"as-built joint” and this time"},{"Start":"10:15.900 ","End":"10:17.500","Text":"I’ll change the motion type to"},{"Start":"10:17.510 ","End":"10:25.620","Text":"“revolute.” Then, I’ll select the"},{"Start":"10:25.639 ","End":"10:27.629","Text":"connector that we used previously"},{"Start":"10:27.679 ","End":"10:29.610","Text":"and I’ll select the stand bracket."},{"Start":"10:30.639 ","End":"10:32.313","Text":"For the position, we’ll want to select"},{"Start":"10:32.470 ","End":"10:35.200","Text":"the hole here, where a pin or bolt"},{"Start":"10:35.230 ","End":"10:37.300","Text":"would go, and you’ll notice that it"},{"Start":"10:37.330 ","End":"10:39.829","Text":"immediately gave us a preview, which"},{"Start":"10:39.830 ","End":"10:42.699","Text":"looked correct so I’ll click okay."},{"Start":"10:44.969 ","End":"10:47.309","Text":"Now because this stand piece is just"},{"Start":"10:47.309 ","End":"10:49.629","Text":"one component this as-built joint was"},{"Start":"10:49.630 ","End":"10:51.560","Text":"not automatically applied to the other"},{"Start":"10:51.560 ","End":"10:53.750","Text":"two legs… so we’ll have to complete"},{"Start":"10:53.760 ","End":"10:55.990","Text":"the same steps for the other two legs."},{"Start":"11:05.799 ","End":"11:07.490","Text":"At this point, we’ll want to test"},{"Start":"11:07.490 ","End":"11:09.270","Text":"that our joints were applied properly."},{"Start":"11:09.550 ","End":"11:11.439","Text":"I’ll simply click and drag on one"},{"Start":"11:11.440 ","End":"11:13.469","Text":"of the legs...and you’ll see that"},{"Start":"11:13.470 ","End":"11:15.060","Text":"I can move the leg around the"},{"Start":"11:15.060 ","End":"11:17.300","Text":"revolute, and I can also slide the"},{"Start":"11:17.300 ","End":"11:19.800","Text":"bottom tube inside the upper tube…."},{"Start":"11:20.820 ","End":"11:22.729","Text":"And to move everything back in place"},{"Start":"11:22.770 ","End":"11:24.850","Text":"I’ll select “revert” in the toolbar."},{"Start":"11:25.620 ","End":"11:26.870","Text":"Now we’ll want to complete the"},{"Start":"11:26.880 ","End":"11:29.140","Text":"assembly by attaching the camera mount."},{"Start":"11:29.570 ","End":"11:31.450","Text":"First, we’ll want to select “as-built"},{"Start":"11:31.460 ","End":"11:33.630","Text":"joint” from the assemble dropdown list."},{"Start":"11:35.150 ","End":"11:38.310","Text":"I’ll change the motion to rigid...and"},{"Start":"11:38.310 ","End":"11:40.210","Text":"then I’ll select the pan head and the"},{"Start":"11:40.219 ","End":"11:45.079","Text":"stand connector and click okay… which"},{"Start":"11:45.080 ","End":"11:46.440","Text":"should finish up everything with the"},{"Start":"11:46.440 ","End":"11:49.030","Text":"components that are already in place."},{"Start":"11:51.070 ","End":"11:53.290","Text":"As we discussed earlier, we’ll now"},{"Start":"11:53.290 ","End":"11:55.129","Text":"need to use the joint command for"},{"Start":"11:55.130 ","End":"11:56.830","Text":"the remaining components, because"},{"Start":"11:56.830 ","End":"11:58.270","Text":"we’ll want to move them into place"},{"Start":"11:58.369 ","End":"12:00.619","Text":"and add a motion at the same time."},{"Start":"12:02.720 ","End":"12:04.680","Text":"To call the joint command I’ll simply"},{"Start":"12:04.680 ","End":"12:07.410","Text":"hit the keyboard shortcut letter “J”...so"},{"Start":"12:07.410 ","End":"12:09.440","Text":"no shift key for just the joint command."},{"Start":"12:11.190 ","End":"12:13.809","Text":"I’ll make sure the type is rigid and"},{"Start":"12:13.809 ","End":"12:16.199","Text":"then as we discussed earlier we’ll first"},{"Start":"12:16.199 ","End":"12:18.540","Text":"select the component that we want to move."},{"Start":"12:19.030 ","End":"12:20.560","Text":"So I’ll look at the model from the"},{"Start":"12:20.570 ","End":"12:22.680","Text":"bottom and select the bottom of the"},{"Start":"12:22.680 ","End":"12:25.230","Text":"red stand… and I’ll want to select it"},{"Start":"12:25.250 ","End":"12:28.210","Text":"where the flat surface is and the glyph"},{"Start":"12:28.210 ","End":"12:30.590","Text":"icon appears over the center hole."},{"Start":"12:31.410 ","End":"12:33.159","Text":"I’ll reposition the model so we"},{"Start":"12:33.160 ","End":"12:34.669","Text":"can look at the top of the stand..."},{"Start":"12:35.820 ","End":"12:37.359","Text":"And I’m going to want to select the"},{"Start":"12:37.370 ","End":"12:40.300","Text":"center circle… but you’ll notice that it’s"},{"Start":"12:40.300 ","End":"12:42.370","Text":"hard to see it because it’s technically"},{"Start":"12:42.370 ","End":"12:46.290","Text":"hidden… so we’ll need to hold down"},{"Start":"12:46.340 ","End":"12:49.549","Text":"command on mac or control on windows"},{"Start":"12:49.900 ","End":"12:53.099","Text":"to lock the face in… and then you’ll"},{"Start":"12:53.100 ","End":"12:55.180","Text":"see that I can select the center hole…"},{"Start":"12:56.210 ","End":"12:57.820","Text":"and the component will automatically"},{"Start":"12:57.820 ","End":"12:59.790","Text":"move over and we can click okay."},{"Start":"13:01.020 ","End":"13:02.970","Text":"The last joint we’ll want to apply"},{"Start":"13:02.980 ","End":"13:05.109","Text":"is a ball joint for the camera mount."},{"Start":"13:05.320 ","End":"13:07.210","Text":"I’ll right-click and select “repeat"},{"Start":"13:07.210 ","End":"13:10.059","Text":"Joint” and then set the motion to ball."},{"Start":"13:11.420 ","End":"13:13.220","Text":"I’ll select the ball of the camera"},{"Start":"13:13.220 ","End":"13:15.060","Text":"mount because we want this component"},{"Start":"13:15.080 ","End":"13:17.380","Text":"to be moved...and then I’ll look at"},{"Start":"13:17.380 ","End":"13:19.990","Text":"the mount from the top… making it a"},{"Start":"13:20.000 ","End":"13:22.349","Text":"bit easier to select the inside ball."},{"Start":"13:24.179 ","End":"13:25.870","Text":"Now you’ll notice with this preview"},{"Start":"13:25.870 ","End":"13:28.209","Text":"that Fusion 360 does not detect the"},{"Start":"13:28.209 ","End":"13:30.439","Text":"material interference that is going on"},{"Start":"13:31.009 ","End":"13:33.320","Text":"here… and you’ll have to set up contact"},{"Start":"13:33.320 ","End":"13:35.430","Text":"sets in order for it to not run through"},{"Start":"13:35.430 ","End":"13:37.920","Text":"this red component… but that will"},{"Start":"13:37.920 ","End":"13:40.129","Text":"have to be covered in another video."},{"Start":"13:41.030 ","End":"13:43.349","Text":"I’ll click okay, and I’ll just move the"},{"Start":"13:43.349 ","End":"13:44.950","Text":"camera mount around to make sure that"},{"Start":"13:44.960 ","End":"13:46.800","Text":"the ball joint does move correctly…."},{"Start":"13:51.650 ","End":"13:51.840","Text":"And there you have it."},{"Start":"13:51.840 ","End":"13:52.790","Text":"Hopefully, this gives you guys"},{"Start":"13:52.850 ","End":"13:54.510","Text":"a very beginner overview of"},{"Start":"13:54.510 ","End":"13:56.809","Text":"joints and motion in Fusion 360."},{"Start":"13:57.820 ","End":"13:59.759","Text":"If you’re coming from a different CAD"},{"Start":"13:59.759 ","End":"14:02.520","Text":"program such as Inventor or SolidWorks"},{"Start":"14:03.009 ","End":"14:05.440","Text":"then you need to have an open mind."},{"Start":"14:05.850 ","End":"14:07.510","Text":"I understand it can be frustrating"},{"Start":"14:07.510 ","End":"14:09.870","Text":"at first, but once your grasp the"},{"Start":"14:09.870 ","End":"14:12.079","Text":"concept I think you’ll find Fusion"},{"Start":"14:12.080 ","End":"14:14.870","Text":"360 joints and motion to be more"},{"Start":"14:14.870 ","End":"14:17.250","Text":"efficient when creating assembly models."}],"ID":29476},{"Watched":false,"Name":"Day 26 - Create a 2D Drawing (Drawing Workspace)","Duration":"15m 44s","ChapterTopicVideoID":27805,"CourseChapterTopicPlaylistID":275347,"HasSubtitles":true,"ThumbnailPath":null,"UploadDate":null,"DurationForVideoObject":null,"Description":null,"MetaTitle":null,"MetaDescription":null,"Canonical":null,"VideoComments":[],"Subtitles":[{"Start":"00:00.060 ","End":"00:00.840","Text":"Kevin Kennedy: Hey there, It’s"},{"Start":"00:00.840 ","End":"00:02.970","Text":"Kevin Kennedy, and welcome to Day"},{"Start":"00:02.970 ","End":"00:06.860","Text":"#26 of Learn Fusion 360 in 30 days."},{"Start":"00:07.250 ","End":"00:09.400","Text":"By the end of this tutorial, you’ll"},{"Start":"00:09.400 ","End":"00:11.590","Text":"be able to create a 2D-drawing"},{"Start":"00:11.599 ","End":"00:13.370","Text":"from your Fusion 360 file."},{"Start":"00:13.940 ","End":"00:15.670","Text":"This lesson is for beginners"},{"Start":"00:15.670 ","End":"00:17.240","Text":"who have never used the Drawing"},{"Start":"00:17.240 ","End":"00:17.799","Text":"Workspace in Fusion 360."},{"Start":"00:18.389 ","End":"00:20.549","Text":"We’ll take a look at how to create a base"},{"Start":"00:20.610 ","End":"00:23.889","Text":"and projected view, how to add dimensions,"},{"Start":"00:24.500 ","End":"00:26.860","Text":"how to update a drawing if the file"},{"Start":"00:26.869 ","End":"00:29.689","Text":"changes, and how to export a drawing."},{"Start":"00:30.230 ","End":"00:32.290","Text":"For this tutorial, I’ll be using a demo"},{"Start":"00:32.290 ","End":"00:34.800","Text":"file that is located in your data panel."},{"Start":"00:35.279 ","End":"00:37.500","Text":"Open up your data panel by clicking"},{"Start":"00:37.510 ","End":"00:40.580","Text":"the grid icon, then scroll down"},{"Start":"00:40.590 ","End":"00:42.660","Text":"until you see the samples section."},{"Start":"00:43.550 ","End":"00:45.830","Text":"I’ll double-click on the “basic trainings”"},{"Start":"00:45.940 ","End":"00:49.110","Text":"section and then scroll down until you"},{"Start":"00:49.110 ","End":"00:53.580","Text":"see the number “8 - Drawings” folder and"},{"Start":"00:53.580 ","End":"00:55.670","Text":"double click on the folder to open it."},{"Start":"00:58.200 ","End":"00:58.650","Text":"I’ll double click on the"},{"Start":"00:58.650 ","End":"01:03.410","Text":"“Connector Joint” file to open it."},{"Start":"01:04.370 ","End":"01:06.170","Text":"Then, you’ll notice just above the"},{"Start":"01:06.170 ","End":"01:08.520","Text":"toolbar that it reminds us these"},{"Start":"01:08.520 ","End":"01:10.844","Text":"sample files are “read-only” files."},{"Start":"01:11.180 ","End":"01:13.080","Text":"We’ll have to make a copy by going to"},{"Start":"01:13.090 ","End":"01:16.910","Text":"file \u003e save as \u003e and then you can change"},{"Start":"01:16.930 ","End":"01:19.090","Text":"the name or the location if you’d like…"},{"Start":"01:19.900 ","End":"01:21.750","Text":"and when you hit the “blue” save button"},{"Start":"01:21.820 ","End":"01:23.819","Text":"it will create a copy of the file."},{"Start":"01:25.530 ","End":"01:27.310","Text":"Now that we have a working file we"},{"Start":"01:27.310 ","End":"01:29.410","Text":"can create our 2-D drawing...and there"},{"Start":"01:29.420 ","End":"01:31.040","Text":"are two ways that we can do this."},{"Start":"01:32.250 ","End":"01:33.610","Text":"The first way that you can create"},{"Start":"01:33.640 ","End":"01:35.400","Text":"a new drawing is from any of your"},{"Start":"01:35.400 ","End":"01:37.470","Text":"design files in the data panel."},{"Start":"01:38.090 ","End":"01:40.120","Text":"If you right-click on the file in"},{"Start":"01:40.120 ","End":"01:42.750","Text":"your data panel \u003e you can select “New"},{"Start":"01:42.750 ","End":"01:45.149","Text":"Drawing from Design.” which will open"},{"Start":"01:45.150 ","End":"01:47.889","Text":"up a 2D-Drawing file in a new tab."},{"Start":"01:54.729 ","End":"01:56.430","Text":"The second way is to have"},{"Start":"01:56.430 ","End":"01:57.989","Text":"your design file open."},{"Start":"01:58.480 ","End":"02:01.760","Text":"Then go to File \u003e New Drawing \u003e and"},{"Start":"02:01.770 ","End":"02:03.409","Text":"then you’ll notice you can select"},{"Start":"02:03.410 ","End":"02:06.119","Text":"“from design” or “from animation.”"},{"Start":"02:07.459 ","End":"02:09.320","Text":"I’ll go ahead and select “From"},{"Start":"02:09.320 ","End":"02:12.300","Text":"Design” since this is a design file."},{"Start":"02:14.330 ","End":"02:16.179","Text":"You’ll notice that any time you create"},{"Start":"02:16.210 ","End":"02:18.310","Text":"a drawing this way it will first prompt"},{"Start":"02:18.310 ","End":"02:20.169","Text":"you with the “Create Drawing” dialog"},{"Start":"02:20.170 ","End":"02:22.010","Text":"box that gives you a few different"},{"Start":"02:22.010 ","End":"02:23.769","Text":"options to set up your drawing."},{"Start":"02:25.100 ","End":"02:26.560","Text":"The first option is what"},{"Start":"02:26.560 ","End":"02:27.990","Text":"the drawing will reference."},{"Start":"02:28.500 ","End":"02:30.770","Text":"You’ll see that it defaulted to “full"},{"Start":"02:30.790 ","End":"02:32.679","Text":"assembly,” but if I didn’t want a"},{"Start":"02:32.679 ","End":"02:35.160","Text":"drawing of the entire assembly I could"},{"Start":"02:35.280 ","End":"02:38.120","Text":"uncheck this box, and then you’ll see"},{"Start":"02:38.120 ","End":"02:40.560","Text":"that I can select specific components."},{"Start":"02:41.379 ","End":"02:42.910","Text":"For now, I’ll go ahead and"},{"Start":"02:42.930 ","End":"02:45.140","Text":"leave that set to full assembly."},{"Start":"02:46.160 ","End":"02:48.390","Text":"The next option which is drawing,"},{"Start":"02:48.640 ","End":"02:50.530","Text":"currently only has the create new"},{"Start":"02:50.530 ","End":"02:52.440","Text":"option because I haven’t created"},{"Start":"02:52.460 ","End":"02:53.939","Text":"a drawing with this file yet."},{"Start":"02:55.400 ","End":"02:57.840","Text":"Next, you’ll see the template option."},{"Start":"02:58.680 ","End":"03:00.709","Text":"I’m going to leave this to the default"},{"Start":"03:00.740 ","End":"03:02.890","Text":"of “from scratch” but it’s important to"},{"Start":"03:02.890 ","End":"03:05.390","Text":"note...if you find yourself creating a"},{"Start":"03:05.400 ","End":"03:07.640","Text":"lot of 2D-drawings you can save templates"},{"Start":"03:08.580 ","End":"03:11.229","Text":"to help speed up your workflow… and of"},{"Start":"03:11.230 ","End":"03:13.409","Text":"course, this is where you would select"},{"Start":"03:13.410 ","End":"03:15.620","Text":"the template you’re wanting to use."},{"Start":"03:17.760 ","End":"03:19.820","Text":"The next option is “standard,”"},{"Start":"03:19.950 ","End":"03:21.530","Text":"where you can choose from either the"},{"Start":"03:21.530 ","End":"03:23.830","Text":"A - S - M - E or the ISO standards."},{"Start":"03:24.490 ","End":"03:26.630","Text":"I’ll leave this set to"},{"Start":"03:26.660 ","End":"03:28.010","Text":"A - S - M - E for now."},{"Start":"03:29.730 ","End":"03:32.370","Text":"Just under that is the units option…"},{"Start":"03:32.429 ","End":"03:34.140","Text":"and this will default to whatever the"},{"Start":"03:34.160 ","End":"03:37.000","Text":"files units were set to...but you can"},{"Start":"03:37.010 ","End":"03:40.000","Text":"always change this to mm or inches."},{"Start":"03:42.270 ","End":"03:43.980","Text":"Last but not least, you’ll see the"},{"Start":"03:43.980 ","End":"03:45.600","Text":"sheet size… where you can change"},{"Start":"03:45.620 ","End":"03:46.929","Text":"the dimensions of the sheet."},{"Start":"03:47.610 ","End":"03:48.969","Text":"So if you are going to be printing this"},{"Start":"03:48.969 ","End":"03:51.029","Text":"2D drawing out or sending this over"},{"Start":"03:51.030 ","End":"03:52.949","Text":"to someone else who will be printing"},{"Start":"03:52.949 ","End":"03:55.370","Text":"it, then you’ll want to make sure you"},{"Start":"03:55.370 ","End":"03:57.110","Text":"select the correct sheet size here."},{"Start":"03:58.170 ","End":"03:59.510","Text":"I’ll leave this to the"},{"Start":"03:59.510 ","End":"04:02.839","Text":"default 17x11in for now."},{"Start":"04:04.160 ","End":"04:06.330","Text":"Now before I click okay, I want to"},{"Start":"04:06.330 ","End":"04:08.429","Text":"point out that the standard and the"},{"Start":"04:08.429 ","End":"04:11.280","Text":"units options cannot be changed once"},{"Start":"04:11.280 ","End":"04:12.600","Text":"you click okay to start your drawing."},{"Start":"04:13.710 ","End":"04:18.299","Text":"However, the sheet size can be changed at"},{"Start":"04:18.329 ","End":"04:20.290","Text":"any time after your drawing is created."},{"Start":"04:20.290 ","End":"04:21.950","Text":"Now I’ll click okay… and you’ll see"},{"Start":"04:21.950 ","End":"04:24.140","Text":"that it opens up a new tab with the"},{"Start":"04:24.380 ","End":"04:26.870","Text":"2 Dimensional sheet… and as I move my"},{"Start":"04:26.870 ","End":"04:28.950","Text":"mouse cursor around you’ll see that"},{"Start":"04:28.950 ","End":"04:31.389","Text":"it has the base view pre-populated."},{"Start":"04:33.750 ","End":"04:35.340","Text":"If you want, you can change the"},{"Start":"04:35.360 ","End":"04:37.210","Text":"orientation and appearance in"},{"Start":"04:37.210 ","End":"04:39.070","Text":"the drawing view dialog box."},{"Start":"04:40.330 ","End":"04:42.760","Text":"Selecting a different orientation will"},{"Start":"04:42.760 ","End":"04:45.069","Text":"change the orientation of the base view,"},{"Start":"04:45.160 ","End":"04:46.810","Text":"as you’ll see here with the preview."},{"Start":"04:47.340 ","End":"04:49.609","Text":"However, the style won’t change in"},{"Start":"04:49.610 ","End":"04:51.760","Text":"the preview… and we can always change"},{"Start":"04:51.780 ","End":"04:53.010","Text":"any of these settings later...so for"},{"Start":"04:53.980 ","End":"04:57.599","Text":"now I’m going to set the scale to 1:1."},{"Start":"04:57.610 ","End":"04:59.240","Text":"You can either change the scale by"},{"Start":"04:59.240 ","End":"05:02.179","Text":"selecting the pre-populated options, or"},{"Start":"05:02.200 ","End":"05:04.749","Text":"you can always type out a scale size."},{"Start":"05:05.940 ","End":"05:08.110","Text":"So let’s go ahead and set this base view."},{"Start":"05:09.300 ","End":"05:11.060","Text":"I’m going to click on the left side"},{"Start":"05:11.060 ","End":"05:13.219","Text":"of the sheet, and then click okay."},{"Start":"05:14.889 ","End":"05:16.880","Text":"Before we move any further I want to"},{"Start":"05:16.880 ","End":"05:18.429","Text":"point out that the Drawing Workspace"},{"Start":"05:18.509 ","End":"05:21.039","Text":"is the only workspace in Fusion 360"},{"Start":"05:21.280 ","End":"05:23.069","Text":"that doesn’t allow you to toggle"},{"Start":"05:23.080 ","End":"05:24.649","Text":"back and forth between workspaces."},{"Start":"05:26.730 ","End":"05:28.760","Text":"You’ll notice that the toolbar is a bit"},{"Start":"05:28.760 ","End":"05:30.390","Text":"different and there are not quite as"},{"Start":"05:30.390 ","End":"05:32.500","Text":"many options as the model workspace…"},{"Start":"05:33.710 ","End":"05:35.310","Text":"which is really due in part that there"},{"Start":"05:35.330 ","End":"05:37.240","Text":"aren’t as many functions you’ll need"},{"Start":"05:37.240 ","End":"05:39.069","Text":"to use with a 2-Dimensional drawing."},{"Start":"05:41.209 ","End":"05:42.856","Text":"To finish off our drawing we’ll want"},{"Start":"05:42.980 ","End":"05:44.820","Text":"to create some projected views of"},{"Start":"05:44.820 ","End":"05:46.600","Text":"the model, which will allow us to"},{"Start":"05:46.600 ","End":"05:48.860","Text":"show some more orthographic faces."},{"Start":"05:50.210 ","End":"05:52.160","Text":"I’ll click “projected view” in the"},{"Start":"05:52.160 ","End":"05:54.320","Text":"toolbar and then you’ll notice that you"},{"Start":"05:54.320 ","End":"05:56.830","Text":"have to select the view to project from."},{"Start":"05:58.820 ","End":"06:01.580","Text":"I only have one option here, so I’ll"},{"Start":"06:01.580 ","End":"06:03.212","Text":"select the front view that we set…"},{"Start":"06:03.350 ","End":"06:05.060","Text":"and then you’ll notice that I can drag"},{"Start":"06:05.060 ","End":"06:07.350","Text":"the mouse around and the view preview"},{"Start":"06:07.620 ","End":"06:09.720","Text":"will change based on the position."},{"Start":"06:09.720 ","End":"06:14.639","Text":"I’ll go ahead and set a top view by"},{"Start":"06:14.649 ","End":"06:17.929","Text":"clicking above the front view… and"},{"Start":"06:17.930 ","End":"06:19.860","Text":"then I’ll set a perspective view by"},{"Start":"06:19.860 ","End":"06:22.350","Text":"clicking over to the upper-right corner."},{"Start":"06:23.310 ","End":"06:26.810","Text":"Then to confirm these views and to escape"},{"Start":"06:26.810 ","End":"06:28.840","Text":"the projected views feature you’ll have to"},{"Start":"06:28.840 ","End":"06:31.189","Text":"select the “enter” key on your keyboard."},{"Start":"06:33.139 ","End":"06:35.079","Text":"If you want to reposition the views on"},{"Start":"06:35.080 ","End":"06:37.350","Text":"your sheet you can simply click and drag"},{"Start":"06:37.350 ","End":"06:39.979","Text":"the center point around… and if I do this"},{"Start":"06:39.990 ","End":"06:42.000","Text":"for the front view you’ll notice that"},{"Start":"06:42.000 ","End":"06:43.980","Text":"the top view will move along with it."},{"Start":"06:45.059 ","End":"06:47.099","Text":"Any time you project orthographic"},{"Start":"06:47.110 ","End":"06:49.120","Text":"views they will remain connected,"},{"Start":"06:49.750 ","End":"06:52.059","Text":"with the exception of the perspective"},{"Start":"06:52.100 ","End":"06:53.740","Text":"which can be placed anywhere."},{"Start":"06:54.949 ","End":"07:03.260","Text":"A lot of times it’s helpful that the"},{"Start":"07:03.260 ","End":"07:05.350","Text":"perspective view is in full color."},{"Start":"07:05.900 ","End":"07:07.430","Text":"If you want to change the “appearance"},{"Start":"07:07.440 ","End":"07:09.370","Text":"style” simply double click on"},{"Start":"07:09.370 ","End":"07:10.929","Text":"the view and then it will open"},{"Start":"07:10.930 ","End":"07:12.890","Text":"the “drawing view” dialog box."},{"Start":"07:15.060 ","End":"07:16.750","Text":"I can change this appearance to"},{"Start":"07:16.750 ","End":"07:19.780","Text":"“shaded” and then hit close… and"},{"Start":"07:19.780 ","End":"07:21.790","Text":"you’ll notice only this view changed…"},{"Start":"07:21.860 ","End":"07:23.719","Text":"as the perspective is not fully"},{"Start":"07:23.719 ","End":"07:25.710","Text":"dependent on the orthographic views."},{"Start":"07:27.960 ","End":"07:29.439","Text":"Before I go any further"},{"Start":"07:29.480 ","End":"07:30.960","Text":"I’ll click the save icon."},{"Start":"07:31.730 ","End":"07:33.570","Text":"One thing you’ll notice is that every"},{"Start":"07:33.570 ","End":"07:35.780","Text":"time you create a drawing from a file"},{"Start":"07:35.820 ","End":"07:37.130","Text":"it will automatically add the word"},{"Start":"07:37.140 ","End":"07:39.590","Text":"“drawing” to the end of the file name."},{"Start":"07:40.639 ","End":"07:42.420","Text":"I’ll click save… and now let’s"},{"Start":"07:42.420 ","End":"07:43.969","Text":"take a look at changing the"},{"Start":"07:43.969 ","End":"07:45.590","Text":"appearance of the front view…"},{"Start":"07:47.389 ","End":"07:49.030","Text":"Which appearance you choose really"},{"Start":"07:49.039 ","End":"07:51.030","Text":"depends on your needs… but often"},{"Start":"07:51.030 ","End":"07:52.630","Text":"times it’s helpful to show more"},{"Start":"07:52.630 ","End":"07:54.680","Text":"details to fully depict the shape."},{"Start":"07:55.290 ","End":"07:57.500","Text":"I’ll double click on the front view and"},{"Start":"07:57.500 ","End":"08:00.479","Text":"then change the tangent edges to “Full"},{"Start":"08:00.480 ","End":"08:03.070","Text":"length.” You’ll see that they update"},{"Start":"08:03.070 ","End":"08:05.219","Text":"right away… and if we take a closer"},{"Start":"08:05.219 ","End":"08:07.800","Text":"look, this line here better depicts"},{"Start":"08:07.830 ","End":"08:12.130","Text":"the real shape of how these components"},{"Start":"08:12.130 ","End":"08:15.412","Text":"touch in the 3-dimensional object."},{"Start":"08:15.412 ","End":"08:17.159","Text":"Just below the tangent edges option"},{"Start":"08:17.200 ","End":"08:19.629","Text":"is the “interference edges.” You can"},{"Start":"08:19.630 ","End":"08:21.679","Text":"select this option if your model has"},{"Start":"08:21.690 ","End":"08:23.830","Text":"multiple components that intersect."},{"Start":"08:24.510 ","End":"08:26.250","Text":"When interference edges are turned"},{"Start":"08:26.250 ","End":"08:28.540","Text":"on, an edge is displayed that"},{"Start":"08:28.540 ","End":"08:30.270","Text":"shows where the components meet."},{"Start":"08:34.429 ","End":"08:35.750","Text":"Lastly, you’ll see the"},{"Start":"08:35.770 ","End":"08:37.370","Text":"“thread edges” option."},{"Start":"08:37.880 ","End":"08:40.159","Text":"By default threads are not shown"},{"Start":"08:40.159 ","End":"08:41.650","Text":"in drawings...but if you check"},{"Start":"08:41.650 ","End":"08:43.360","Text":"this option it will show any of"},{"Start":"08:43.360 ","End":"08:45.300","Text":"the threads in the selected view."},{"Start":"08:47.280 ","End":"08:49.250","Text":"At this point, our drawing still"},{"Start":"08:49.270 ","End":"08:50.590","Text":"isn’t the most helpful because"},{"Start":"08:50.590 ","End":"08:52.060","Text":"we have no sense of scale."},{"Start":"08:52.559 ","End":"08:53.900","Text":"We’ll want to go ahead and add"},{"Start":"08:53.910 ","End":"08:56.350","Text":"dimensions to the orthographic drawings…"},{"Start":"08:56.740 ","End":"08:58.650","Text":"and this is the last major piece of"},{"Start":"08:58.650 ","End":"09:00.169","Text":"the drawing workspace that I’ll be"},{"Start":"09:00.170 ","End":"09:02.150","Text":"covering in this beginner lesson."},{"Start":"09:03.990 ","End":"09:05.340","Text":"I’m going to zoom in on the"},{"Start":"09:05.340 ","End":"09:06.620","Text":"front view, and we’ll take a"},{"Start":"09:06.620 ","End":"09:07.900","Text":"look at how to dimension it."},{"Start":"09:09.160 ","End":"09:11.260","Text":"The easiest way to add dimensions is"},{"Start":"09:11.260 ","End":"09:13.050","Text":"by hitting the dimension tool in the"},{"Start":"09:13.059 ","End":"09:16.370","Text":"toolbar OR by hitting the keyboard"},{"Start":"09:16.370 ","End":"09:18.400","Text":"shortcut letter “D” for Dimension."},{"Start":"09:19.580 ","End":"09:21.310","Text":"Then, you’ll see as I move my"},{"Start":"09:21.310 ","End":"09:22.890","Text":"cursor around it will preview"},{"Start":"09:22.890 ","End":"09:24.209","Text":"some dimensions for us."},{"Start":"09:25.600 ","End":"09:27.160","Text":"One way to create a dimension"},{"Start":"09:27.170 ","End":"09:28.900","Text":"is by clicking on a line."},{"Start":"09:29.410 ","End":"09:31.280","Text":"If I click on the outer vertical"},{"Start":"09:31.280 ","End":"09:33.280","Text":"line I can create a dimension for"},{"Start":"09:33.280 ","End":"09:35.749","Text":"that line… and I can move my cursor"},{"Start":"09:35.750 ","End":"09:38.290","Text":"around and I’ll have to click once"},{"Start":"09:38.320 ","End":"09:40.829","Text":"again to set the dimension in place."},{"Start":"09:42.690 ","End":"09:44.830","Text":"Now after setting a dimension you’ll"},{"Start":"09:44.840 ","End":"09:46.569","Text":"still technically be using the"},{"Start":"09:46.570 ","End":"09:48.759","Text":"dimension command unless you hit"},{"Start":"09:48.759 ","End":"09:50.806","Text":"the escape key on your keyboard."},{"Start":"09:50.910 ","End":"09:52.010","Text":"The next way to create a"},{"Start":"09:52.010 ","End":"09:54.289","Text":"dimension is to select two points."},{"Start":"09:54.960 ","End":"09:56.660","Text":"If I click on the lower-left"},{"Start":"09:56.660 ","End":"09:58.570","Text":"point just above the fillet…."},{"Start":"09:59.910 ","End":"10:02.370","Text":"and then the lower right point just above"},{"Start":"10:02.370 ","End":"10:04.660","Text":"the fillet… you’ll see that I can create"},{"Start":"10:04.710 ","End":"10:06.739","Text":"a dimension for the width of this part,"},{"Start":"10:07.110 ","End":"10:11.199","Text":"which is 2.25 inches… and once again,"},{"Start":"10:11.260 ","End":"10:13.450","Text":"I have to click to set the dimension."},{"Start":"10:16.200 ","End":"10:17.860","Text":"Using the dimension tool you can"},{"Start":"10:17.860 ","End":"10:19.880","Text":"dimension just about everything."},{"Start":"10:20.220 ","End":"10:21.880","Text":"However, sometimes you’ll find it"},{"Start":"10:21.880 ","End":"10:24.310","Text":"hard to dimension specific geometry."},{"Start":"10:24.920 ","End":"10:26.450","Text":"Because of this, the Fusion"},{"Start":"10:26.450 ","End":"10:28.569","Text":"engineers have gone ahead and made"},{"Start":"10:28.580 ","End":"10:30.490","Text":"more specific dimension commands."},{"Start":"10:31.160 ","End":"10:33.200","Text":"If I click on the dimension drop-down"},{"Start":"10:33.210 ","End":"10:34.770","Text":"list you’ll see that there are"},{"Start":"10:34.770 ","End":"10:37.480","Text":"dimensions commands specifically for"},{"Start":"10:37.480 ","End":"10:41.620","Text":"linear lines, angles, the radius or"},{"Start":"10:41.620 ","End":"10:43.960","Text":"diameter of circles, and a few others."},{"Start":"10:44.960 ","End":"10:47.259","Text":"I’ll go ahead and select the “Diameter"},{"Start":"10:47.260 ","End":"10:49.430","Text":"Dimension” tool and you’ll see that"},{"Start":"10:49.440 ","End":"10:51.630","Text":"this tool will only work if I select"},{"Start":"10:51.630 ","End":"10:55.380","Text":"the edge of a circle or arc… and the"},{"Start":"10:55.390 ","End":"10:57.520","Text":"benefit of this is that I don’t have to"},{"Start":"10:57.520 ","End":"10:59.850","Text":"worry about accidentally clicking on any"},{"Start":"10:59.850 ","End":"11:02.480","Text":"of these other lines, as I would if I"},{"Start":"11:02.480 ","End":"11:04.660","Text":"were using the general dimension tool."},{"Start":"11:05.859 ","End":"11:07.819","Text":"I’ll click on the innermost circle"},{"Start":"11:07.940 ","End":"11:09.510","Text":"and then drag the dimension out"},{"Start":"11:09.620 ","End":"11:11.220","Text":"and click to set it in place."},{"Start":"11:12.170 ","End":"11:13.290","Text":"I’ll go ahead and click on"},{"Start":"11:13.290 ","End":"11:14.920","Text":"the second circle and drag"},{"Start":"11:14.929 ","End":"11:16.550","Text":"that dimension out as well."},{"Start":"11:22.859 ","End":"11:24.469","Text":"If you’re new to the world of CAD,"},{"Start":"11:24.480 ","End":"11:26.540","Text":"including 2-dimensional drawings, then"},{"Start":"11:26.540 ","End":"11:27.960","Text":"you’ll find that what you’re doing"},{"Start":"11:27.960 ","End":"11:29.740","Text":"with your model will help you decide"},{"Start":"11:29.740 ","End":"11:31.490","Text":"the best way to set up your drawing."},{"Start":"11:32.520 ","End":"11:34.380","Text":"If you’re working with another company"},{"Start":"11:34.650 ","End":"11:36.410","Text":"that’s going to manufacturer the product"},{"Start":"11:36.410 ","End":"11:38.169","Text":"for you, you’ll want to check with"},{"Start":"11:38.170 ","End":"11:40.380","Text":"them to see what standards they follow."},{"Start":"11:40.980 ","End":"11:42.930","Text":"On the other hand, if you’re creating a"},{"Start":"11:42.930 ","End":"11:45.600","Text":"drawing for fun or for your own purposes,"},{"Start":"11:46.250 ","End":"11:48.050","Text":"you’ll still want to follow some best"},{"Start":"11:48.060 ","End":"11:50.729","Text":"practices for dimensioning CAD files."},{"Start":"11:51.670 ","End":"11:53.689","Text":"I’ll link to an article in the description"},{"Start":"11:53.690 ","End":"11:55.840","Text":"below that talks about the best practices"},{"Start":"11:55.840 ","End":"11:58.049","Text":"more in-depth...but here are three of"},{"Start":"11:58.049 ","End":"11:59.839","Text":"my top rules that you should follow"},{"Start":"12:00.049 ","End":"12:01.979","Text":"when dimensioning your drawing files."},{"Start":"12:03.470 ","End":"12:05.349","Text":"Rule #1 is that dimensions"},{"Start":"12:05.360 ","End":"12:06.970","Text":"should not be duplicated."},{"Start":"12:07.370 ","End":"12:09.560","Text":"For example, we labeled the right"},{"Start":"12:09.560 ","End":"12:13.199","Text":"side as 1.5” so I wouldn’t put a"},{"Start":"12:13.200 ","End":"12:15.689","Text":"label on the left side unless it"},{"Start":"12:15.690 ","End":"12:17.909","Text":"were something other than 1.5.”"},{"Start":"12:19.499 ","End":"12:21.849","Text":"Rule #2 is to use the minimum"},{"Start":"12:21.849 ","End":"12:23.409","Text":"amount of dimensions required"},{"Start":"12:23.559 ","End":"12:25.599","Text":"to produce or inspect the part."},{"Start":"12:26.319 ","End":"12:28.049","Text":"Having unnecessary dimensions"},{"Start":"12:28.119 ","End":"12:29.769","Text":"just makes drawings more cluttered"},{"Start":"12:29.829 ","End":"12:31.209","Text":"and harder to understand."},{"Start":"12:32.709 ","End":"12:35.869","Text":"Rule #3 is to never cross-dimension lines."},{"Start":"12:36.490 ","End":"12:38.590","Text":"This one can make things really confusing…"},{"Start":"12:38.880 ","End":"12:41.425","Text":"so be careful and pay close attention"},{"Start":"12:41.720 ","End":"12:43.490","Text":"to where you set your dimensions."},{"Start":"12:45.559 ","End":"12:47.230","Text":"For the sake of time, I’m not"},{"Start":"12:47.230 ","End":"12:48.800","Text":"going to add any more dimensions"},{"Start":"12:48.800 ","End":"12:50.729","Text":"to this drawing, but I will point"},{"Start":"12:50.730 ","End":"12:52.299","Text":"out that I would need a few more"},{"Start":"12:52.299 ","End":"12:54.699","Text":"dimensions to fully depict this model."},{"Start":"12:56.170 ","End":"12:57.970","Text":"Let’s take a look at two more things that"},{"Start":"12:57.970 ","End":"12:59.579","Text":"you can do with the drawing workspace."},{"Start":"13:00.450 ","End":"13:02.150","Text":"The second to last feature that I"},{"Start":"13:02.150 ","End":"13:04.480","Text":"want to show is what will happen"},{"Start":"13:04.500 ","End":"13:06.350","Text":"if your original model changes."},{"Start":"13:06.870 ","End":"13:08.760","Text":"I’ll go back to the 3D file."},{"Start":"13:09.290 ","End":"13:11.079","Text":"Then, I’ll hit the keyboard shortcut"},{"Start":"13:11.080 ","End":"13:14.210","Text":"letter “Q” for press pull and I’m just"},{"Start":"13:14.210 ","End":"13:16.300","Text":"going to extend one of the faces out"},{"Start":"13:16.300 ","End":"13:19.030","Text":"to the right… and I’ll go ahead and"},{"Start":"13:19.030 ","End":"13:21.359","Text":"save this by clicking on the save icon."},{"Start":"13:25.219 ","End":"13:27.649","Text":"Now… if I go back to the drawing you’ll"},{"Start":"13:27.650 ","End":"13:29.790","Text":"see that it gives me a warning message"},{"Start":"13:29.830 ","End":"13:31.930","Text":"that says “changes have been made to"},{"Start":"13:31.960 ","End":"13:34.630","Text":"the referenced design.” So to let these"},{"Start":"13:34.630 ","End":"13:37.080","Text":"changes happen all you have to do is click"},{"Start":"13:37.080 ","End":"13:39.735","Text":"on the link icon at the top, and then"},{"Start":"13:39.735 ","End":"13:41.709","Text":"you’ll see that the model and all of these"},{"Start":"13:41.730 ","End":"13:44.400","Text":"projected views are automatically updated."},{"Start":"13:45.849 ","End":"13:47.740","Text":"The part I changed wasn’t dimensioned"},{"Start":"13:47.740 ","End":"13:47.755","Text":"but had I changed one of the areas that"},{"Start":"13:47.755 ","End":"13:55.939","Text":"have a dimension then the dimension"},{"Start":"13:55.940 ","End":"13:58.170","Text":"would automatically be changed as well."},{"Start":"13:59.320 ","End":"14:01.839","Text":"As you can imagine this is pretty powerful"},{"Start":"14:01.860 ","End":"14:03.360","Text":"and the fact that they are linked can"},{"Start":"14:03.360 ","End":"14:05.519","Text":"save you a lot of time from not having"},{"Start":"14:05.520 ","End":"14:07.876","Text":"to go back and edit drawings if you"},{"Start":"14:07.876 ","End":"14:09.334","Text":"make changes to the original file."},{"Start":"14:09.334 ","End":"14:10.660","Text":"Alternatively, if you wanted to make"},{"Start":"14:10.660 ","End":"14:13.020","Text":"changes to the file and not have it affect"},{"Start":"14:13.020 ","End":"14:14.990","Text":"this drawing you would have to create a"},{"Start":"14:15.059 ","End":"14:18.030","Text":"copy of the file in your data panel, and"},{"Start":"14:18.040 ","End":"14:21.329","Text":"then the copied file would be independent"},{"Start":"14:21.380 ","End":"14:23.240","Text":"and no longer linked to the drawing."},{"Start":"14:25.410 ","End":"14:26.910","Text":"The last thing we’ll take a look at"},{"Start":"14:26.940 ","End":"14:28.689","Text":"in this beginner lesson is how to"},{"Start":"14:28.770 ","End":"14:31.130","Text":"export the 2-Dimensional drawing."},{"Start":"14:32.120 ","End":"14:33.959","Text":"If you want to print the drawing you"},{"Start":"14:33.960 ","End":"14:36.780","Text":"can use the keyboard shortcut CMD + P"},{"Start":"14:36.780 ","End":"14:39.939","Text":"on Mac or Control + P on windows…."},{"Start":"14:40.650 ","End":"14:41.989","Text":"Which will allow you to choose the"},{"Start":"14:41.990 ","End":"14:44.329","Text":"printer and a few other settings."},{"Start":"14:45.640 ","End":"14:47.240","Text":"Otherwise, you can export the"},{"Start":"14:47.240 ","End":"14:49.360","Text":"drawing to three different formats."},{"Start":"14:50.250 ","End":"14:52.280","Text":"If you look at your toolbar you’ll see an"},{"Start":"14:52.330 ","End":"14:54.960","Text":"“output” dropdown list at the far right."},{"Start":"14:55.980 ","End":"14:58.310","Text":"The first option allows you to export"},{"Start":"14:58.350 ","End":"15:00.399","Text":"and save the drawing as a PDF file,"},{"Start":"15:00.410 ","End":"15:01.939","Text":"which can be helpful if you need to"},{"Start":"15:01.940 ","End":"15:03.490","Text":"share the file with someone else."},{"Start":"15:05.050 ","End":"15:07.580","Text":"The second option allows you to export"},{"Start":"15:07.580 ","End":"15:11.619","Text":"it as a drawing or .DWG file, which can"},{"Start":"15:11.620 ","End":"15:13.590","Text":"be useful if you need to open it up in"},{"Start":"15:13.590 ","End":"15:16.519","Text":"another CAD program or another piece"},{"Start":"15:16.520 ","End":"15:19.420","Text":"of software that accepts DWG files."},{"Start":"15:21.040 ","End":"15:23.070","Text":"Lastly, the third option allows"},{"Start":"15:23.070 ","End":"15:25.439","Text":"you to export as a CSV or"},{"Start":"15:25.440 ","End":"15:27.550","Text":"Comma-separated values file."},{"Start":"15:28.280 ","End":"15:34.920","Text":"This option really only works if you’ve"},{"Start":"15:34.920 ","End":"15:36.720","Text":"used the parts-list feature in the Drawing"},{"Start":"15:36.900 ","End":"15:37.122","Text":"Workspace… and if you have used it then"},{"Start":"15:37.140 ","End":"15:38.949","Text":"this export option can be helpful if you"},{"Start":"15:38.949 ","End":"15:39.699","Text":"need to get your parts lists migrated to"},{"Start":"15:39.700 ","End":"15:42.630","Text":"another platform, such as an excel sheet."}],"ID":29009},{"Watched":false,"Name":"Day 27 - Patch a Model (Surface Tools)","Duration":"11m 37s","ChapterTopicVideoID":27806,"CourseChapterTopicPlaylistID":275347,"HasSubtitles":true,"ThumbnailPath":null,"UploadDate":null,"DurationForVideoObject":null,"Description":null,"MetaTitle":null,"MetaDescription":null,"Canonical":null,"VideoComments":[],"Subtitles":[{"Start":"00:00.060 ","End":"00:00.870","Text":"Kevin Kennedy: Hey there, It’s"},{"Start":"00:00.870 ","End":"00:02.880","Text":"Kevin Kennedy, and welcome to Day"},{"Start":"00:02.880 ","End":"00:06.840","Text":"#27 of Learn Fusion 360 in 30 days."},{"Start":"00:07.320 ","End":"00:09.680","Text":"By the end of this tutorial, you’ll be"},{"Start":"00:09.680 ","End":"00:11.799","Text":"able to patch and repair an imported"},{"Start":"00:11.800 ","End":"00:13.930","Text":"model within the Patch Workspace."},{"Start":"00:14.509 ","End":"00:15.970","Text":"We’ll take a look at what the patch"},{"Start":"00:16.109 ","End":"00:18.469","Text":"workspace is commonly used for, how to"},{"Start":"00:18.670 ","End":"00:21.530","Text":"extrude a surface model, how to delete"},{"Start":"00:21.530 ","End":"00:24.900","Text":"faces, and how to stitch a surface model."},{"Start":"00:30.210 ","End":"00:32.420","Text":"Many of you that are new to Fusion 360"},{"Start":"00:32.439 ","End":"00:34.509","Text":"have probably seen the Patch Workspace in"},{"Start":"00:34.510 ","End":"00:36.769","Text":"the dropdown list, but you find yourself"},{"Start":"00:36.780 ","End":"00:39.029","Text":"always reverting to the Model Workspace,"},{"Start":"00:39.350 ","End":"00:41.390","Text":"or maybe even the CAM workspace."},{"Start":"00:42.150 ","End":"00:43.570","Text":"So before we dive into patching"},{"Start":"00:44.250 ","End":"00:45.900","Text":"an imported model, I want to"},{"Start":"00:45.900 ","End":"00:47.740","Text":"briefly talk about the intention"},{"Start":"00:47.769 ","End":"00:49.069","Text":"of the Patch Workspace."},{"Start":"00:50.670 ","End":"00:52.509","Text":"The Fusion 360 Patch Workspace"},{"Start":"00:52.539 ","End":"00:54.129","Text":"has two main purposes."},{"Start":"00:54.760 ","End":"00:56.910","Text":"The first purpose is to patch or"},{"Start":"00:56.960 ","End":"00:58.730","Text":"fix surface models that are NOT"},{"Start":"00:58.740 ","End":"01:01.260","Text":"completely solid or watertight models."},{"Start":"01:02.330 ","End":"01:05.420","Text":"In Fusion 360, a surface is a geometry"},{"Start":"01:05.420 ","End":"01:07.679","Text":"within the software that has no mass or"},{"Start":"01:07.679 ","End":"01:10.699","Text":"thickness, but still allows users to form"},{"Start":"01:10.709 ","End":"01:13.420","Text":"and create the shape or style of a model."},{"Start":"01:14.320 ","End":"01:16.210","Text":"In Fusion these surfaces or surface"},{"Start":"01:16.210 ","End":"01:18.170","Text":"bodies are considered a Patch,"},{"Start":"01:18.410 ","End":"01:20.190","Text":"hence the “Patch Workspace.”"},{"Start":"01:21.160 ","End":"01:23.110","Text":"Models that have holes to be patched"},{"Start":"01:23.110 ","End":"01:24.720","Text":"could be imported from another CAD"},{"Start":"01:24.720 ","End":"01:26.790","Text":"program, or they could be models that"},{"Start":"01:26.790 ","End":"01:28.689","Text":"were created in the sculpt environment"},{"Start":"01:28.730 ","End":"01:30.330","Text":"that are not fully closed yet."},{"Start":"01:31.740 ","End":"01:33.350","Text":"The second main purpose of the"},{"Start":"01:33.350 ","End":"01:34.830","Text":"Patch Workspace is to create"},{"Start":"01:34.830 ","End":"01:36.830","Text":"Surface models from scratch."},{"Start":"01:37.320 ","End":"01:39.470","Text":"In some scenarios, models are best"},{"Start":"01:39.470 ","End":"01:41.679","Text":"created with the patch environment and"},{"Start":"01:41.690 ","End":"01:44.339","Text":"then modified further in the parametric"},{"Start":"01:44.339 ","End":"01:46.279","Text":"modeling or direct modeling environments."},{"Start":"01:47.230 ","End":"01:49.330","Text":"This type of CAD workflow is most"},{"Start":"01:49.330 ","End":"01:50.899","Text":"commonly used in the packaging"},{"Start":"01:50.900 ","End":"01:53.570","Text":"industry, especially with with plastics."},{"Start":"01:54.130 ","End":"01:56.020","Text":"You’ll see this a lot with complex"},{"Start":"01:56.020 ","End":"01:58.530","Text":"bottles, vessels, or containers"},{"Start":"01:58.539 ","End":"02:00.470","Text":"that are easily modeled as surface"},{"Start":"02:00.470 ","End":"02:02.610","Text":"bodies and stitched together."},{"Start":"02:03.759 ","End":"02:05.250","Text":"For example, take a look at"},{"Start":"02:05.250 ","End":"02:06.779","Text":"your laundry detergent bottle."},{"Start":"02:07.320 ","End":"02:09.360","Text":"If it’s one of these standard detergent"},{"Start":"02:09.360 ","End":"02:11.710","Text":"style bottles then it is very likely"},{"Start":"02:11.710 ","End":"02:13.240","Text":"that someone first created this bottle"},{"Start":"02:13.240 ","End":"02:15.550","Text":"design with a surface model approach"},{"Start":"02:15.580 ","End":"02:17.690","Text":"in their respective CAD software."},{"Start":"02:17.690 ","End":"02:18.100","Text":"If you’d like to see some tutorials"},{"Start":"02:18.100 ","End":"02:18.511","Text":"on surface modeling then be sure to"},{"Start":"02:18.511 ","End":"02:18.921","Text":"let me know in the comments below..by"},{"Start":"02:18.921 ","End":"02:19.156","Text":"commenting that you’re interested"},{"Start":"02:19.156 ","End":"02:19.391","Text":"in learning surface modeling."},{"Start":"02:19.450 ","End":"02:21.309","Text":"Now that you know why the Patch Workspace"},{"Start":"02:21.339 ","End":"02:23.209","Text":"exists, let’s take a look at how to"},{"Start":"02:23.209 ","End":"02:25.320","Text":"actually use some of its core features."},{"Start":"02:26.160 ","End":"02:28.140","Text":"For this demo I’ll be using a file"},{"Start":"02:28.150 ","End":"02:30.770","Text":"located in your Fusion 360 data panel."},{"Start":"02:31.290 ","End":"02:33.569","Text":"Click on the data panel grid icon in"},{"Start":"02:33.570 ","End":"02:36.440","Text":"the upper left-hand corner, then scroll"},{"Start":"02:36.440 ","End":"02:38.900","Text":"down until you see the samples section."},{"Start":"02:40.359 ","End":"02:42.290","Text":"Double click on the Basic Trainings"},{"Start":"02:42.299 ","End":"02:44.720","Text":"group...and scroll down until you see"},{"Start":"02:47.170 ","End":"02:50.500","Text":"“#12 - Patch.” I’ll double click on"},{"Start":"02:50.500 ","End":"02:52.080","Text":"that folder and then I will double"},{"Start":"02:52.080 ","End":"02:54.310","Text":"click to open the “Buckle” Model."},{"Start":"02:54.320 ","End":"02:59.710","Text":"Fusion 360 sample files are read-only, so"},{"Start":"02:59.710 ","End":"03:01.850","Text":"we’ll have to create a copy of the file."},{"Start":"03:02.260 ","End":"03:05.630","Text":"Head up to file \u003e save as… and"},{"Start":"03:05.630 ","End":"03:07.780","Text":"then you can change the name or"},{"Start":"03:07.780 ","End":"03:09.890","Text":"location of the file if you’d like…"},{"Start":"03:10.790 ","End":"03:12.920","Text":"and clicking the blue save button"},{"Start":"03:12.950 ","End":"03:14.909","Text":"will create a copy of the file."},{"Start":"03:17.549 ","End":"03:18.920","Text":"Now that we have a copy of the"},{"Start":"03:18.930 ","End":"03:20.640","Text":"file we can start working on it."},{"Start":"03:21.070 ","End":"03:22.940","Text":"The first thing I want you to notice is"},{"Start":"03:22.950 ","End":"03:25.850","Text":"the file type in the Fusion 360 browser."},{"Start":"03:26.290 ","End":"03:28.260","Text":"Toggle open the component folder,"},{"Start":"03:28.300 ","End":"03:30.080","Text":"and then the bodies folder…"},{"Start":"03:30.120 ","End":"03:32.090","Text":"and take note of the icon here."},{"Start":"03:32.660 ","End":"03:34.350","Text":"This icon represents a"},{"Start":"03:34.350 ","End":"03:36.610","Text":"surface body in Fusion 360."},{"Start":"03:38.190 ","End":"03:40.290","Text":"If you ever import a model from somewhere"},{"Start":"03:40.290 ","End":"03:42.340","Text":"online, and you’re wondering why you"},{"Start":"03:42.340 ","End":"03:43.900","Text":"can’t use the parametric modeling"},{"Start":"03:43.900 ","End":"03:46.380","Text":"tools to alter it, then double check"},{"Start":"03:46.390 ","End":"03:49.079","Text":"to make sure the body is a solid body…"},{"Start":"03:49.320 ","End":"03:51.380","Text":"and not one of these surface bodies."},{"Start":"03:53.149 ","End":"03:55.210","Text":"In our case, we don’t have a solid"},{"Start":"03:55.210 ","End":"03:57.420","Text":"body yet, so we’ll want to fix that."},{"Start":"03:58.160 ","End":"04:00.590","Text":"Looking at the model in the home position"},{"Start":"04:00.650 ","End":"04:02.869","Text":"I’ll zoom in a bit… and I’m just going"},{"Start":"04:02.870 ","End":"04:05.160","Text":"to use the viewcube to take a look at"},{"Start":"04:05.160 ","End":"04:07.299","Text":"it from the middle… and you’ll notice"},{"Start":"04:07.299 ","End":"04:09.279","Text":"here right in the middle there’s a huge"},{"Start":"04:09.280 ","End":"04:11.760","Text":"hole in the model… so this model is"},{"Start":"04:11.760 ","End":"04:14.650","Text":"clearly not solid or “watertight” as we"},{"Start":"04:14.650 ","End":"04:16.300","Text":"already figured out by looking at the"},{"Start":"04:16.300 ","End":"04:19.010","Text":"type of body in the Fusion 360 browser."},{"Start":"04:20.760 ","End":"04:22.210","Text":"First, we’ll want to make sure that we"},{"Start":"04:22.210 ","End":"04:24.719","Text":"switch to the Patch Workspace by selecting"},{"Start":"04:24.719 ","End":"04:26.999","Text":"Patch in the workspace dropdown list."},{"Start":"04:28.270 ","End":"04:30.419","Text":"Then, we’ll want to use a tool that will"},{"Start":"04:30.420 ","End":"04:32.710","Text":"let us patch this surface hole...and"},{"Start":"04:32.710 ","End":"04:34.810","Text":"to do this, we’ll actually be using"},{"Start":"04:34.820 ","End":"04:36.909","Text":"the “Patch” command, which you’ll see"},{"Start":"04:36.920 ","End":"04:39.640","Text":"is in the toolbar, or I can select"},{"Start":"04:39.640 ","End":"04:41.590","Text":"it from the create dropdown list."},{"Start":"04:43.710 ","End":"04:44.900","Text":"The first thing the Patch"},{"Start":"04:44.900 ","End":"04:46.780","Text":"dialog box prompts us to do is"},{"Start":"04:46.780 ","End":"04:48.790","Text":"to select the boundary edges."},{"Start":"04:49.320 ","End":"04:51.370","Text":"We’ll want to select all four edges"},{"Start":"04:51.370 ","End":"04:52.670","Text":"that go all the way around the"},{"Start":"04:52.670 ","End":"04:55.159","Text":"hole… and sometimes you’ll find you"},{"Start":"04:55.160 ","End":"04:56.980","Text":"have to select them one by one and"},{"Start":"04:56.980 ","End":"04:58.320","Text":"sometimes you’ll be able to select"},{"Start":"04:58.320 ","End":"05:00.880","Text":"the entire perimeter with one click."},{"Start":"05:01.900 ","End":"05:03.099","Text":"You’ll also notice that the"},{"Start":"05:03.099 ","End":"05:04.820","Text":"preview Fusion is giving us is"},{"Start":"05:04.900 ","End":"05:06.940","Text":"already showing the surface patch."},{"Start":"05:08.870 ","End":"05:10.790","Text":"In some scenarios you may want"},{"Start":"05:10.800 ","End":"05:12.739","Text":"to use the “Group Edges” command."},{"Start":"05:13.150 ","End":"05:15.579","Text":"In our case, we only have four edges,"},{"Start":"05:15.639 ","End":"05:17.920","Text":"so it’s not too bad… but you may"},{"Start":"05:17.920 ","End":"05:19.249","Text":"run into a model where you have a"},{"Start":"05:19.250 ","End":"05:21.140","Text":"larger number of edges to modify."},{"Start":"05:21.790 ","End":"05:24.029","Text":"Selecting group edges will allow you to"},{"Start":"05:24.029 ","End":"05:26.430","Text":"make changes to all of the edges at once."},{"Start":"05:27.550 ","End":"05:29.400","Text":"We want this surface to be nice and"},{"Start":"05:29.400 ","End":"05:31.760","Text":"smooth so I’ll make sure the continuity"},{"Start":"05:31.780 ","End":"05:35.159","Text":"is set to connected, as connected creates"},{"Start":"05:35.190 ","End":"05:38.469","Text":"a surface with G0 edges, which are"},{"Start":"05:38.500 ","End":"05:41.229","Text":"edges that are connected at an angle."},{"Start":"05:42.279 ","End":"05:44.180","Text":"Just below that we could select"},{"Start":"05:44.200 ","End":"05:46.230","Text":"a rail or a point if we did have"},{"Start":"05:46.230 ","End":"05:48.070","Text":"one to reference, which would make"},{"Start":"05:48.070 ","End":"05:50.110","Text":"this patch even more predictable."},{"Start":"05:51.309 ","End":"05:53.830","Text":"For now, just selecting the edge patched"},{"Start":"05:53.830 ","End":"05:55.849","Text":"the shape very well, so I’ll click"},{"Start":"05:55.849 ","End":"05:58.480","Text":"“okay” to exit the patch dialog box."},{"Start":"06:01.160 ","End":"06:02.960","Text":"Next, I want to make sure that the"},{"Start":"06:02.960 ","End":"06:05.520","Text":"holes on the sides are also patched."},{"Start":"06:05.520 ","End":"06:08.299","Text":"To patch these holes I’ll use the “extend”"},{"Start":"06:08.300 ","End":"06:10.480","Text":"command from the modify dropdown list."},{"Start":"06:12.290 ","End":"06:14.070","Text":"We’re going to want to extend this"},{"Start":"06:14.070 ","End":"06:15.950","Text":"circle out into the hole, where"},{"Start":"06:15.950 ","End":"06:17.810","Text":"its perpendicular to the side."},{"Start":"06:18.330 ","End":"06:20.099","Text":"Therefore, the first thing I’ll do is"},{"Start":"06:20.100 ","End":"06:22.479","Text":"set the “extend type” to perpendicular."},{"Start":"06:23.390 ","End":"06:25.770","Text":"Then, I’ll select the outer edge… and"},{"Start":"06:25.770 ","End":"06:30.889","Text":"I’ll type in -5.153, as I’m just making"},{"Start":"06:30.889 ","End":"06:33.850","Text":"sure it goes past this other hole… and"},{"Start":"06:33.850 ","End":"06:36.110","Text":"then I’ll click okay in the dialog box."},{"Start":"06:38.580 ","End":"06:40.250","Text":"Next, I’ll right click and"},{"Start":"06:40.250 ","End":"06:42.115","Text":"select “Repeat Extend” and then"},{"Start":"06:42.115 ","End":"06:43.800","Text":"I’ll select the inner circle."},{"Start":"06:44.700 ","End":"06:46.139","Text":"The “extend type” should have"},{"Start":"06:46.139 ","End":"06:48.839","Text":"defaulted to Perpendicular, so all"},{"Start":"06:48.840 ","End":"06:50.970","Text":"you need to do is extend this surface"},{"Start":"06:51.049 ","End":"06:53.560","Text":"out until it’s past the other edge"},{"Start":"06:53.570 ","End":"06:55.790","Text":"that we just created...as that will"},{"Start":"06:55.790 ","End":"06:57.810","Text":"make the next step easier for us."},{"Start":"06:59.030 ","End":"07:01.610","Text":"Click okay in the dialog box… and"},{"Start":"07:01.610 ","End":"07:03.490","Text":"then we’ll need to repeat these exact"},{"Start":"07:03.490 ","End":"07:05.749","Text":"same steps on the opposite side."},{"Start":"07:06.929 ","End":"07:08.190","Text":"I’ll look at the model from"},{"Start":"07:08.190 ","End":"07:09.880","Text":"the other side of the viewcube."},{"Start":"07:10.449 ","End":"07:12.530","Text":"Then, I’ll right click and select"},{"Start":"07:12.570 ","End":"07:15.170","Text":"“repeat extend.” I’ll click on the"},{"Start":"07:15.210 ","End":"07:17.620","Text":"outer circle and you’ll see that it has"},{"Start":"07:17.620 ","End":"07:20.050","Text":"the last dimension we used as well as"},{"Start":"07:20.230 ","End":"07:22.840","Text":"perpendicular set for the extend faces,"},{"Start":"07:23.230 ","End":"07:25.450","Text":"so all we have to do is click okay."},{"Start":"07:26.849 ","End":"07:28.819","Text":"Then, I’ll right click and select"},{"Start":"07:28.820 ","End":"07:32.050","Text":"“repeat extend” once again, and this time"},{"Start":"07:32.050 ","End":"07:34.190","Text":"clicking on the inner edge, I’ll just"},{"Start":"07:34.190 ","End":"07:36.570","Text":"want to make sure the surface is extended"},{"Start":"07:36.620 ","End":"07:38.760","Text":"enough to go past the previous edge."},{"Start":"07:38.760 ","End":"07:42.329","Text":"At this point, we’ll need to"},{"Start":"07:42.330 ","End":"07:44.250","Text":"trim out the excess surface."},{"Start":"07:44.960 ","End":"07:47.010","Text":"Because the surface is internal"},{"Start":"07:47.020 ","End":"07:47.820","Text":"we’ll want to look at the"},{"Start":"07:47.820 ","End":"07:50.200","Text":"model from a section analysis."},{"Start":"07:50.910 ","End":"07:52.810","Text":"If you needed to create a new section"},{"Start":"07:52.810 ","End":"07:54.680","Text":"analysis you could select it from the"},{"Start":"07:54.680 ","End":"07:58.170","Text":"inspect dropdown list… but fortunately"},{"Start":"07:58.170 ","End":"08:00.560","Text":"for us the Fusion engineers have already"},{"Start":"08:00.560 ","End":"08:03.180","Text":"set one up for this sample file…so"},{"Start":"08:03.190 ","End":"08:05.399","Text":"all we have to do click to turn on the"},{"Start":"08:05.400 ","End":"08:07.830","Text":"light bulb next to the analysis folder."},{"Start":"08:11.560 ","End":"08:13.350","Text":"I’ll zoom in on the left side so"},{"Start":"08:13.350 ","End":"08:14.939","Text":"it’s easier to see… and you’ll"},{"Start":"08:14.940 ","End":"08:16.700","Text":"notice you can see the surface"},{"Start":"08:16.719 ","End":"08:18.689","Text":"that extends past this edge."},{"Start":"08:19.370 ","End":"08:21.320","Text":"Because we don’t need this surface"},{"Start":"08:21.380 ","End":"08:22.849","Text":"I’ll select it and then hit"},{"Start":"08:22.859 ","End":"08:24.650","Text":"the delete key on the keyboard."},{"Start":"08:25.440 ","End":"08:27.599","Text":"We’ll also want to do this to the other"},{"Start":"08:27.600 ","End":"08:28.940","Text":"side, so I’ll pan over to the right…"},{"Start":"08:28.940 ","End":"08:29.811","Text":"Select the face, and I will hit"},{"Start":"08:29.811 ","End":"08:39.909","Text":"the delete key on the keyboard."},{"Start":"08:39.909 ","End":"08:41.809","Text":"I’ll go ahead and hide the"},{"Start":"08:41.809 ","End":"08:43.309","Text":"analysis folder because we’re"},{"Start":"08:43.320 ","End":"08:45.150","Text":"done using the “section analysis.”"},{"Start":"08:46.300 ","End":"08:47.570","Text":"If we look at the bottom of the"},{"Start":"08:47.570 ","End":"08:49.400","Text":"buckle, you’ll notice that part"},{"Start":"08:49.400 ","End":"08:50.850","Text":"of the buckle is messed up."},{"Start":"08:51.500 ","End":"08:53.920","Text":"We want this to be one solid piece, so"},{"Start":"08:53.920 ","End":"08:55.750","Text":"let’s zoom in and take a look at it."},{"Start":"08:56.589 ","End":"08:58.360","Text":"Looking at each piece, they look like"},{"Start":"08:58.360 ","End":"09:00.670","Text":"they’re closed surfaces...so what we’ll"},{"Start":"09:00.670 ","End":"09:03.050","Text":"want to do in order to make them one piece"},{"Start":"09:03.330 ","End":"09:06.329","Text":"is delete the inner faces and then we will"},{"Start":"09:06.340 ","End":"09:08.579","Text":"stitch all of the faces back together."},{"Start":"09:09.420 ","End":"09:11.280","Text":"While holding down the shift key I’ll"},{"Start":"09:11.280 ","End":"09:14.200","Text":"select the right face… the bottom"},{"Start":"09:14.200 ","End":"09:18.359","Text":"face… and then the left face… and"},{"Start":"09:18.359 ","End":"09:20.150","Text":"I’ll hit the delete key on my keyboard"},{"Start":"09:20.160 ","End":"09:24.550","Text":"to delete them all three of them."},{"Start":"09:24.840 ","End":"09:26.560","Text":"To rejoin these shapes we’ll"},{"Start":"09:26.560 ","End":"09:28.199","Text":"use the extrude command from"},{"Start":"09:28.200 ","End":"09:29.680","Text":"the create dropdown menu."},{"Start":"09:31.210 ","End":"09:32.840","Text":"I’ll select the left edge…."},{"Start":"09:33.320 ","End":"09:34.950","Text":"and then to get the extrude command"},{"Start":"09:34.950 ","End":"09:36.780","Text":"to come all the way to the other edge"},{"Start":"09:36.800 ","End":"09:38.890","Text":"I’ll want to select a corner point."},{"Start":"09:39.780 ","End":"09:42.000","Text":"So I’ll select this corner point…"},{"Start":"09:43.240 ","End":"09:44.670","Text":"and it looks correct so I’ll"},{"Start":"09:44.670 ","End":"09:46.709","Text":"click okay in the dialog box."},{"Start":"09:48.719 ","End":"09:50.080","Text":"If we now look at the Fusion"},{"Start":"09:50.080 ","End":"09:51.730","Text":"360 browser, you’ll see that we"},{"Start":"09:51.730 ","End":"09:53.719","Text":"have 3 different surface bodies."},{"Start":"09:54.139 ","End":"09:55.609","Text":"We have two for the extrudes"},{"Start":"09:55.620 ","End":"09:57.520","Text":"that we created, and one for"},{"Start":"09:57.520 ","End":"09:59.060","Text":"the original surface body."},{"Start":"10:00.680 ","End":"10:02.430","Text":"As we talked about in the beginning of"},{"Start":"10:02.430 ","End":"10:04.440","Text":"this tutorial, our goal is to turn this"},{"Start":"10:04.440 ","End":"10:08.789","Text":"surface body into one solid body...so what"},{"Start":"10:08.790 ","End":"10:10.270","Text":"we’ll want to do at this point is stitch"},{"Start":"10:10.309 ","End":"10:12.180","Text":"all of these surface bodies together."},{"Start":"10:13.680 ","End":"10:15.290","Text":"To do this, I’ll select the"},{"Start":"10:15.310 ","End":"10:17.010","Text":"“stitch” command in the toolbar"},{"Start":"10:17.360 ","End":"10:19.480","Text":"or from the modify dropdown list."},{"Start":"10:20.110 ","End":"10:22.060","Text":"Then, I’ll first select the two"},{"Start":"10:22.060 ","End":"10:23.540","Text":"surfaces that we created with the"},{"Start":"10:23.710 ","End":"10:25.930","Text":"extrude command… and last I’ll"},{"Start":"10:25.930 ","End":"10:27.979","Text":"select the original surface model."},{"Start":"10:28.949 ","End":"10:30.660","Text":"You’ll notice the second thing in"},{"Start":"10:30.660 ","End":"10:32.729","Text":"the dialog box is the tolerance."},{"Start":"10:32.850 ","End":"10:34.560","Text":"We’ll want to make sure this is set to"},{"Start":"10:35.780 ","End":"10:38.710","Text":".01mm, so the tolerance is fairly small"},{"Start":"10:39.030 ","End":"10:40.599","Text":"making sure we don’t have any gaps."},{"Start":"10:40.599 ","End":"10:43.890","Text":"We’ll also want to make sure the"},{"Start":"10:43.890 ","End":"10:46.589","Text":"operation is set to new body, and then"},{"Start":"10:46.590 ","End":"10:48.589","Text":"we’ll click okay to see if this works."},{"Start":"10:49.860 ","End":"10:51.950","Text":"Looking over at the Fusion 360 browser"},{"Start":"10:51.950 ","End":"10:53.970","Text":"again, you’ll see that it did in fact"},{"Start":"10:53.970 ","End":"10:56.500","Text":"work and now we have one solid body that"},{"Start":"10:56.500 ","End":"10:57.890","Text":"we can manipulate with either parametric"},{"Start":"10:58.700 ","End":"11:01.209","Text":"modeling or direct modeling mode."},{"Start":"11:02.650 ","End":"11:05.109","Text":"You’ll also notice that the body"},{"Start":"11:05.109 ","End":"11:07.079","Text":"left our original component, so"},{"Start":"11:07.080 ","End":"11:09.140","Text":"to fix this simply drag the body"},{"Start":"11:09.150 ","End":"11:11.069","Text":"back down to the component folder."},{"Start":"11:12.350 ","End":"11:14.190","Text":"Last but not least, our section"},{"Start":"11:14.190 ","End":"11:16.380","Text":"analysis was deleted when the solid"},{"Start":"11:16.380 ","End":"11:19.039","Text":"body was created, because the original"},{"Start":"11:19.040 ","End":"11:21.120","Text":"surface model no longer exists."},{"Start":"11:22.379 ","End":"11:24.599","Text":"If I turn the section analysis back"},{"Start":"11:24.609 ","End":"11:29.740","Text":"on… you’ll see that we do in fact"},{"Start":"11:29.740 ","End":"11:32.130","Text":"have a solid and watertight model."},{"Start":"11:32.130 ","End":"11:32.131","Text":"We’ll also want to do this to the other"},{"Start":"11:32.131 ","End":"11:32.133","Text":"side, but before that we also want to"},{"Start":"11:32.133 ","End":"11:32.135","Text":"delete the other edge that sticks out."},{"Start":"11:32.135 ","End":"11:32.138","Text":"After deleting this face I’ll pan back"},{"Start":"11:32.138 ","End":"11:32.143","Text":"over to the right… and I’ll delete the"},{"Start":"11:32.143 ","End":"11:32.165","Text":"other two edges that we don’t need."}],"ID":29010},{"Watched":false,"Name":"Day 28 - Render a Product (Part 1 of 2)","Duration":"11m 35s","ChapterTopicVideoID":27807,"CourseChapterTopicPlaylistID":275347,"HasSubtitles":true,"ThumbnailPath":null,"UploadDate":null,"DurationForVideoObject":null,"Description":null,"MetaTitle":null,"MetaDescription":null,"Canonical":null,"VideoComments":[],"Subtitles":[{"Start":"00:00.010 ","End":"00:00.930","Text":"Kevin Kennedy: Hey there, It’s"},{"Start":"00:00.930 ","End":"00:02.980","Text":"Kevin Kennedy, and welcome to Day"},{"Start":"00:03.260 ","End":"00:06.729","Text":"#28 of Learn Fusion 360 in 30 days."},{"Start":"00:07.460 ","End":"00:10.070","Text":"By the end of this tutorial, you’ll"},{"Start":"00:10.070 ","End":"00:12.540","Text":"be able to set up a product to render"},{"Start":"00:12.580 ","End":"00:14.949","Text":"in Fusion 360’s Render Workspace."},{"Start":"00:15.679 ","End":"00:17.349","Text":"We’ll take a look at how to apply"},{"Start":"00:17.389 ","End":"00:19.510","Text":"appearances and physical materials,"},{"Start":"00:19.910 ","End":"00:21.870","Text":"how to apply decals, and how"},{"Start":"00:21.870 ","End":"00:23.890","Text":"to create custom appearances."},{"Start":"00:24.670 ","End":"00:26.760","Text":"For this demo, I’ll be using a file"},{"Start":"00:26.770 ","End":"00:29.590","Text":"located in your Fusion 360 data panel."},{"Start":"00:30.219 ","End":"00:32.540","Text":"Click on the data panel grid icon in"},{"Start":"00:32.540 ","End":"00:35.559","Text":"the upper left-hand corner, then scroll"},{"Start":"00:35.559 ","End":"00:37.990","Text":"down until you see the samples section."},{"Start":"00:39.130 ","End":"00:41.120","Text":"Double click on the Basic Trainings"},{"Start":"00:41.130 ","End":"00:43.700","Text":"group...and scroll down until you see"},{"Start":"00:45.250 ","End":"00:47.800","Text":"“#7 -Rendering.” I’ll double click"},{"Start":"00:47.809 ","End":"00:49.890","Text":"on that folder and then I will double"},{"Start":"00:49.890 ","End":"00:52.150","Text":"click to open the first model, which"},{"Start":"00:52.150 ","End":"00:54.140","Text":"does not have any color applied to it."},{"Start":"00:59.200 ","End":"01:02.280","Text":"Fusion 360 sample files are read-only, so"},{"Start":"01:02.280 ","End":"01:04.369","Text":"we’ll have to create a copy of the file."},{"Start":"01:05.139 ","End":"01:08.219","Text":"Head up to file \u003e save as… and"},{"Start":"01:08.219 ","End":"01:09.920","Text":"then you can change the name or"},{"Start":"01:10.039 ","End":"01:11.879","Text":"location of the file if you’d like…"},{"Start":"01:12.059 ","End":"01:13.940","Text":"and clicking the blue save button"},{"Start":"01:13.950 ","End":"01:15.910","Text":"will create a copy of the file."},{"Start":"01:18.000 ","End":"01:19.380","Text":"Now we’ll want to switch to the"},{"Start":"01:19.380 ","End":"01:21.590","Text":"Render Workspace by selecting Render"},{"Start":"01:21.599 ","End":"01:23.529","Text":"from the workspace dropdown list."},{"Start":"01:25.130 ","End":"01:26.600","Text":"You’ll notice right away that there"},{"Start":"01:26.600 ","End":"01:28.569","Text":"are fewer features in this workspace…"},{"Start":"01:28.670 ","End":"01:30.600","Text":"as the intention of this environment"},{"Start":"01:30.870 ","End":"01:32.920","Text":"is to give you only the capabilities"},{"Start":"01:32.950 ","End":"01:35.330","Text":"to create realistic product images."},{"Start":"01:37.130 ","End":"01:38.750","Text":"You’ll see that this sample file"},{"Start":"01:38.789 ","End":"01:40.899","Text":"already has some colors and physical"},{"Start":"01:40.910 ","End":"01:42.869","Text":"material appearances applied to it."},{"Start":"01:43.400 ","End":"01:44.460","Text":"Let’s take a look at how to"},{"Start":"01:44.480 ","End":"01:46.579","Text":"alter or change the appearances."},{"Start":"01:48.039 ","End":"01:50.070","Text":"To get the appearance dialog box you"},{"Start":"01:50.070 ","End":"01:51.970","Text":"can click the appearance icon in the"},{"Start":"01:51.970 ","End":"01:55.280","Text":"toolbar… select it from the setup dropdown"},{"Start":"01:55.290 ","End":"01:57.860","Text":"list… or you can always use the keyboard"},{"Start":"01:57.860 ","End":"02:00.030","Text":"shortcut letter “A” for appearance."},{"Start":"02:02.450 ","End":"02:04.410","Text":"Once the appearance dialog box"},{"Start":"02:04.440 ","End":"02:05.754","Text":"opens up you’ll notice that"},{"Start":"02:05.809 ","End":"02:07.620","Text":"it has 3 different sections."},{"Start":"02:08.130 ","End":"02:10.280","Text":"The first section is the “apply to”"},{"Start":"02:10.280 ","End":"02:12.150","Text":"section, where you can choose whether"},{"Start":"02:12.150 ","End":"02:14.090","Text":"to apply an appearance to an entire"},{"Start":"02:14.090 ","End":"02:17.420","Text":"body or component… or you can also"},{"Start":"02:17.420 ","End":"02:19.700","Text":"choose the faces option that will"},{"Start":"02:19.700 ","End":"02:21.179","Text":"allow you to apply any appearance"},{"Start":"02:21.179 ","End":"02:23.549","Text":"to specific faces that you select."},{"Start":"02:25.589 ","End":"02:28.330","Text":"The second section is title “In this"},{"Start":"02:28.330 ","End":"02:30.950","Text":"Design.” This section displays all"},{"Start":"02:30.950 ","End":"02:32.200","Text":"of the different materials that are"},{"Start":"02:32.210 ","End":"02:33.849","Text":"currently applied to your design."},{"Start":"02:35.940 ","End":"02:38.000","Text":"The third section is the appearance"},{"Start":"02:38.000 ","End":"02:39.749","Text":"library, where you can choose from"},{"Start":"02:39.750 ","End":"02:41.939","Text":"a number of different appearances"},{"Start":"02:41.990 ","End":"02:43.500","Text":"that have already been created."},{"Start":"02:44.370 ","End":"02:46.210","Text":"You’ll see that the library is organized"},{"Start":"02:46.460 ","End":"02:48.960","Text":"by different categories… and we can also"},{"Start":"02:48.960 ","End":"02:51.500","Text":"search the library with this search box."},{"Start":"02:52.880 ","End":"02:54.110","Text":"I’m going to go ahead and"},{"Start":"02:54.110 ","End":"02:56.329","Text":"double-click on the plastic folder..."},{"Start":"02:56.700 ","End":"02:58.600","Text":"and the opaque folder."},{"Start":"02:59.869 ","End":"03:01.670","Text":"I’ll scroll down until I see the"},{"Start":"03:01.680 ","End":"03:05.900","Text":"“glossy yellow.” To apply this yellow"},{"Start":"03:05.900 ","End":"03:08.180","Text":"plastic color to the body of the Utility"},{"Start":"03:08.180 ","End":"03:10.579","Text":"knife all we have to do is simply"},{"Start":"03:10.580 ","End":"03:12.890","Text":"drag the material onto the component."},{"Start":"03:14.139 ","End":"03:16.870","Text":"And Again, doing so will color the entire"},{"Start":"03:16.870 ","End":"03:18.880","Text":"component and body because we have that"},{"Start":"03:18.880 ","End":"03:21.720","Text":"option selected in the “apply to” section."},{"Start":"03:23.790 ","End":"03:25.490","Text":"We’ll want to add an appearance to the"},{"Start":"03:25.490 ","End":"03:27.720","Text":"right side of the utility knife as well."},{"Start":"03:28.200 ","End":"03:29.770","Text":"Another way that you can add color"},{"Start":"03:29.780 ","End":"03:31.120","Text":"is by dragging and dropping the"},{"Start":"03:31.120 ","End":"03:33.010","Text":"color directly to the component"},{"Start":"03:33.080 ","End":"03:34.899","Text":"in the Fusion 360 browser."},{"Start":"03:36.119 ","End":"03:38.330","Text":"To be successful and efficient in the"},{"Start":"03:38.330 ","End":"03:40.070","Text":"Render workspace you’ll have to use"},{"Start":"03:40.080 ","End":"03:43.369","Text":"both of these methods… which method you"},{"Start":"03:43.370 ","End":"03:45.499","Text":"use really depends on the complexity"},{"Start":"03:45.500 ","End":"03:47.330","Text":"of your model and how the components"},{"Start":"03:47.380 ","End":"03:49.240","Text":"are pieced together in the assembly."},{"Start":"03:50.940 ","End":"03:52.509","Text":"Let’s go ahead and add the appearance"},{"Start":"03:52.520 ","End":"03:54.280","Text":"of rubber to this back grip."},{"Start":"03:55.020 ","End":"03:57.440","Text":"To find it quickly I’ll simply type"},{"Start":"03:57.440 ","End":"03:59.160","Text":"out “rubber” in the search box."},{"Start":"04:00.420 ","End":"04:02.030","Text":"One thing to point out is that"},{"Start":"04:02.030 ","End":"04:03.220","Text":"your rubber appearance may"},{"Start":"04:03.220 ","End":"04:04.930","Text":"not be accessible quite yet."},{"Start":"04:05.330 ","End":"04:06.289","Text":"You’ll notice that many"},{"Start":"04:06.290 ","End":"04:08.160","Text":"materials have to be downloaded."},{"Start":"04:08.690 ","End":"04:10.219","Text":"You’ll want to make sure that the “show"},{"Start":"04:10.230 ","End":"04:12.750","Text":"downloadable materials” box is checked…"},{"Start":"04:13.410 ","End":"04:16.160","Text":"and then to download materials you’ll just"},{"Start":"04:16.160 ","End":"04:18.440","Text":"need to click on the download icon on the"},{"Start":"04:18.440 ","End":"04:22.890","Text":"far right side… and you’ll see in a matter"},{"Start":"04:22.890 ","End":"04:25.119","Text":"of seconds the material is downloaded."},{"Start":"04:27.639 ","End":"04:29.180","Text":"I’ll drag and drop the soft"},{"Start":"04:29.180 ","End":"04:30.880","Text":"rubber onto the back grip."},{"Start":"04:32.370 ","End":"04:34.560","Text":"Now looking at the Fusion 360 browser"},{"Start":"04:34.580 ","End":"04:36.530","Text":"you’ll notice that there is a second grip,"},{"Start":"04:36.630 ","End":"04:38.810","Text":"which is the grip at the top of the knife."},{"Start":"04:39.410 ","End":"04:40.699","Text":"For this piece, I’ll use a"},{"Start":"04:40.700 ","End":"04:42.570","Text":"more textured type of plastic."},{"Start":"04:43.139 ","End":"04:44.780","Text":"I’ll type “polka” in the search"},{"Start":"04:44.780 ","End":"04:47.370","Text":"box… and then click on the download"},{"Start":"04:47.370 ","End":"04:49.550","Text":"icon to download the appearance."},{"Start":"04:51.780 ","End":"04:54.200","Text":"Once the polka material is downloaded"},{"Start":"04:54.260 ","End":"04:56.380","Text":"I’ll simply drag that over to the model…"},{"Start":"04:57.120 ","End":"04:58.919","Text":"and if I zoom in a bit, you’ll see that"},{"Start":"04:58.920 ","End":"05:01.609","Text":"it has a nice textured polka dot pattern"},{"Start":"05:01.660 ","End":"05:03.790","Text":"to add some grip to the top of the knife."},{"Start":"05:05.940 ","End":"05:07.489","Text":"Taking a look at the model..."},{"Start":"05:07.560 ","End":"05:09.060","Text":"you can see how quickly the model"},{"Start":"05:09.060 ","End":"05:10.550","Text":"can start to come to life as we"},{"Start":"05:10.550 ","End":"05:12.770","Text":"apply these realistic appearances."},{"Start":"05:13.720 ","End":"05:15.330","Text":"Let’s go ahead and add a few more"},{"Start":"05:15.330 ","End":"05:16.620","Text":"appearances to finish it off."},{"Start":"05:16.620 ","End":"05:20.680","Text":"We’ll want to add a stainless steel"},{"Start":"05:20.680 ","End":"05:22.479","Text":"appearance to the blade of the knife."},{"Start":"05:23.020 ","End":"05:25.260","Text":"I’ll search “steel” in the search box…."},{"Start":"05:25.820 ","End":"05:27.500","Text":"and I’ll just drag the “stainless"},{"Start":"05:27.500 ","End":"05:30.230","Text":"steel - satin” appearance"},{"Start":"05:30.290 ","End":"05:31.830","Text":"over to the blade component."},{"Start":"05:33.389 ","End":"05:35.359","Text":"Looking in the Fusion 360 browser"},{"Start":"05:35.410 ","End":"05:36.860","Text":"it looks like we have one last"},{"Start":"05:36.880 ","End":"05:38.730","Text":"component, which is the “Blade"},{"Start":"05:38.740 ","End":"05:40.719","Text":"Cradle” at the bottom of the list."},{"Start":"05:42.039 ","End":"05:44.109","Text":"We want this piece to stand out so"},{"Start":"05:44.110 ","End":"05:46.030","Text":"the user of the knife understands how"},{"Start":"05:46.030 ","End":"05:48.980","Text":"to open and close the blade… so I’ll"},{"Start":"05:48.980 ","End":"05:51.039","Text":"get rid of this recent search and"},{"Start":"05:51.040 ","End":"05:53.190","Text":"go back to the plastics folder, to"},{"Start":"05:53.200 ","End":"05:55.400","Text":"take a look at the available options…"},{"Start":"05:58.809 ","End":"06:00.840","Text":"I like this matte blue color so"},{"Start":"06:00.840 ","End":"06:02.409","Text":"I’ll go ahead and drag that over"},{"Start":"06:02.410 ","End":"06:04.060","Text":"to the Blade cradle component."},{"Start":"06:05.500 ","End":"06:07.020","Text":"Now that we have an appearance applied"},{"Start":"06:07.020 ","End":"06:09.050","Text":"to each component, let’s take a look at"},{"Start":"06:09.050 ","End":"06:11.310","Text":"how to edit the details of an appearance."},{"Start":"06:13.580 ","End":"06:15.560","Text":"If I decided I wanted the color of the"},{"Start":"06:15.560 ","End":"06:18.469","Text":"body to be red instead of yellow, then"},{"Start":"06:18.470 ","End":"06:20.520","Text":"I could simply drag the red glossy"},{"Start":"06:20.520 ","End":"06:23.330","Text":"color to the yellow color above...and"},{"Start":"06:23.330 ","End":"06:25.050","Text":"you’ll notice that it replaces it."},{"Start":"06:25.820 ","End":"06:27.799","Text":"And because the same yellow appearance"},{"Start":"06:27.809 ","End":"06:29.469","Text":"was used on both sides of the"},{"Start":"06:29.469 ","End":"06:32.729","Text":"utility knife, you’ll see the red was"},{"Start":"06:32.809 ","End":"06:35.200","Text":"automatically applied to both components."},{"Start":"06:37.139 ","End":"06:40.690","Text":"I’ll hit CMD + Z twice to revert"},{"Start":"06:40.700 ","End":"06:43.080","Text":"back...and I’ll show you another way"},{"Start":"06:43.080 ","End":"06:45.219","Text":"that we can do this… I’ll use the"},{"Start":"06:45.220 ","End":"06:47.320","Text":"keyboard shortcut letter “A” to open"},{"Start":"06:47.320 ","End":"06:49.520","Text":"the appearance dialog box once again."},{"Start":"06:51.139 ","End":"06:52.990","Text":"If you double click on a material"},{"Start":"06:53.020 ","End":"06:54.290","Text":"you’ll notice that you can use the"},{"Start":"06:54.300 ","End":"06:56.460","Text":"color picker to change the color."},{"Start":"06:57.060 ","End":"06:59.150","Text":"You can also change the roughness"},{"Start":"06:59.200 ","End":"07:01.679","Text":"and reflectance… and if you click"},{"Start":"07:01.680 ","End":"07:03.699","Text":"the advanced options, you’ll be"},{"Start":"07:03.700 ","End":"07:05.820","Text":"presented with a number of options to"},{"Start":"07:05.820 ","End":"07:07.930","Text":"completely customize the appearance."},{"Start":"07:08.950 ","End":"07:11.369","Text":"These options can get pretty complex, so"},{"Start":"07:11.369 ","End":"07:13.500","Text":"we’ll have to save them for another video."},{"Start":"07:14.270 ","End":"07:16.070","Text":"I’ll hit cancel and then double"},{"Start":"07:16.070 ","End":"07:18.010","Text":"click to reopen the yellow color."},{"Start":"07:18.980 ","End":"07:20.540","Text":"You’ll notice at the top you"},{"Start":"07:20.540 ","End":"07:22.200","Text":"can select the “color libraries”"},{"Start":"07:22.200 ","End":"07:23.979","Text":"button which will let you choose"},{"Start":"07:23.980 ","End":"07:26.519","Text":"from all of the Pantone colors."},{"Start":"07:29.639 ","End":"07:31.319","Text":"Now a few other quick tips with"},{"Start":"07:31.320 ","End":"07:33.490","Text":"the appearances… if you right-click"},{"Start":"07:34.490 ","End":"07:35.580","Text":"you’ll see that you can add"},{"Start":"07:35.580 ","End":"07:37.340","Text":"appearances to your favorites…."},{"Start":"07:37.820 ","End":"07:38.770","Text":"Which will put them in this"},{"Start":"07:38.780 ","End":"07:40.810","Text":"“favorites” tab of the library."},{"Start":"07:43.230 ","End":"07:44.870","Text":"Under the right-click menu you’ll"},{"Start":"07:44.880 ","End":"07:46.980","Text":"also see that you can click on “select"},{"Start":"07:47.049 ","End":"07:49.709","Text":"objects applied to” which will highlight"},{"Start":"07:49.760 ","End":"07:52.420","Text":"all the components, bodies, or faces"},{"Start":"07:52.460 ","End":"07:54.150","Text":"that the appearance is applied to."},{"Start":"07:55.960 ","End":"07:58.470","Text":"Also on the list is “unassign and"},{"Start":"07:58.470 ","End":"08:00.610","Text":"delete” which will remove and delete"},{"Start":"08:00.670 ","End":"08:02.750","Text":"all occurrences of the appearance…."},{"Start":"08:04.270 ","End":"08:06.010","Text":"And last but not least, you’ll see"},{"Start":"08:06.010 ","End":"08:07.779","Text":"that you can duplicate an appearance."},{"Start":"08:09.239 ","End":"08:10.849","Text":"Duplicating an appearance allows"},{"Start":"08:10.849 ","End":"08:12.209","Text":"you to create a new appearance"},{"Start":"08:12.209 ","End":"08:14.189","Text":"by customizing it without messing"},{"Start":"08:14.189 ","End":"08:16.149","Text":"up any preexisting appearances."},{"Start":"08:17.349 ","End":"08:19.469","Text":"If I right-click to edit the duplicated"},{"Start":"08:19.469 ","End":"08:22.549","Text":"appearance… you’ll see that you can"},{"Start":"08:22.549 ","End":"08:23.259","Text":"rename the appearance at the top…"},{"Start":"08:23.819 ","End":"08:25.650","Text":"as well as all the other features"},{"Start":"08:25.690 ","End":"08:27.380","Text":"that we previously discussed."},{"Start":"08:29.670 ","End":"08:30.340","Text":"Let’s take a look at two"},{"Start":"08:30.340 ","End":"08:31.410","Text":"more things in this video."},{"Start":"08:36.259 ","End":"08:37.659","Text":"First, I want to point out the"},{"Start":"08:37.659 ","End":"08:39.680","Text":"important difference between physical"},{"Start":"08:39.680 ","End":"08:42.140","Text":"materials and appearance materials."},{"Start":"08:43.470 ","End":"08:44.980","Text":"The appearance materials are"},{"Start":"08:44.980 ","End":"08:46.810","Text":"the colors and textures that we"},{"Start":"08:46.810 ","End":"08:48.390","Text":"have been applying to our model."},{"Start":"08:49.300 ","End":"08:51.840","Text":"They are for appearance and representation"},{"Start":"08:51.840 ","End":"08:55.140","Text":"purposes only and DO NOT affect the"},{"Start":"08:55.140 ","End":"08:56.760","Text":"physical properties of the model."},{"Start":"08:57.770 ","End":"09:01.529","Text":"You’ll see that physical materials work"},{"Start":"09:01.800 ","End":"09:03.830","Text":"in a similar fashion as the appearance"},{"Start":"09:03.860 ","End":"09:06.540","Text":"materials… but these physical materials"},{"Start":"09:06.690 ","End":"09:08.769","Text":"do affect the physical properties of"},{"Start":"09:08.770 ","End":"09:11.690","Text":"a model… which is important should you"},{"Start":"09:11.690 ","End":"09:14.450","Text":"need to run a simulation or another"},{"Start":"09:14.910 ","End":"09:17.189","Text":"analysis in the simulation workspace."},{"Start":"09:20.359 ","End":"09:21.700","Text":"You’ll see that the body of our"},{"Start":"09:21.700 ","End":"09:24.470","Text":"utility knife is set to mild steel…"},{"Start":"09:24.760 ","End":"09:26.460","Text":"and we want this to be plastic…."},{"Start":"09:26.520 ","End":"09:28.130","Text":"So I’ll right-click and select"},{"Start":"09:28.210 ","End":"09:30.370","Text":"“unassign and delete.” which"},{"Start":"09:30.370 ","End":"09:32.339","Text":"will remove that steel material."},{"Start":"09:33.469 ","End":"09:35.930","Text":"Next, I’ll click on the plastics folder"},{"Start":"09:36.020 ","End":"09:38.850","Text":"and select ABS plastic… and I’ll drag"},{"Start":"09:38.850 ","End":"09:40.569","Text":"that over to the body of the knife…"},{"Start":"09:40.630 ","End":"09:42.939","Text":"and click Close on the dialog box."},{"Start":"09:45.360 ","End":"09:47.300","Text":"You’ll notice right after I clicked close"},{"Start":"09:47.309 ","End":"09:49.340","Text":"it shows the appearance that we previously"},{"Start":"09:49.360 ","End":"09:52.020","Text":"added… as changing the physical material"},{"Start":"09:52.039 ","End":"09:53.980","Text":"does not remove any appearances that"},{"Start":"09:53.980 ","End":"09:55.830","Text":"have already been added to the model."},{"Start":"09:56.810 ","End":"09:58.280","Text":"The last thing that I want to show you"},{"Start":"09:58.280 ","End":"10:01.010","Text":"guys in this part 1 of a two-part video"},{"Start":"10:01.060 ","End":"10:03.430","Text":"is how to add a decal to your model."},{"Start":"10:04.330 ","End":"10:05.949","Text":"For this demo, I’m going to use"},{"Start":"10:05.950 ","End":"10:08.019","Text":"the Autodesk Logo and I’ll link to"},{"Start":"10:08.020 ","End":"10:10.060","Text":"the file in the video description."},{"Start":"10:11.690 ","End":"10:13.540","Text":"To add a decal you can select"},{"Start":"10:13.570 ","End":"10:15.790","Text":"“decal” in the toolbar… or"},{"Start":"10:15.790 ","End":"10:17.740","Text":"from the setup dropdown list."},{"Start":"10:19.950 ","End":"10:21.809","Text":"Then, you’ll first have to select the"},{"Start":"10:21.809 ","End":"10:24.180","Text":"face of where you want the decal to go."},{"Start":"10:25.000 ","End":"10:26.560","Text":"In this case, I’ll select the"},{"Start":"10:26.560 ","End":"10:28.479","Text":"left side of the utility knife."},{"Start":"10:29.520 ","End":"10:31.689","Text":"Next, we’ll have to select the image"},{"Start":"10:31.700 ","End":"10:34.160","Text":"from the downloads folder… and you’ll"},{"Start":"10:34.160 ","End":"10:36.050","Text":"see that places the file on the"},{"Start":"10:36.050 ","End":"10:38.170","Text":"face that we previously selected."},{"Start":"10:40.179 ","End":"10:41.839","Text":"One thing you’ll find helpful when"},{"Start":"10:41.840 ","End":"10:43.539","Text":"working with decals is looking"},{"Start":"10:43.540 ","End":"10:45.340","Text":"directly at the face of the model"},{"Start":"10:45.360 ","End":"10:47.280","Text":"that the decal was applied to."},{"Start":"10:48.960 ","End":"10:50.380","Text":"I’ll use the viewcube to take a"},{"Start":"10:50.380 ","End":"10:52.109","Text":"look at it from the right side."},{"Start":"10:54.760 ","End":"10:57.819","Text":"I can now use the rotation slider… and"},{"Start":"10:57.870 ","End":"11:00.580","Text":"the planar position icon to move the"},{"Start":"11:01.139 ","End":"11:05.510","Text":"decal into place… and when I’m happy"},{"Start":"11:05.510 ","End":"11:07.330","Text":"with the look I’ll click “okay” in the"},{"Start":"11:07.330 ","End":"11:10.240","Text":"dialog box to confirm the decal changes."},{"Start":"11:12.880 ","End":"11:13.743","Text":"This wraps up part number"},{"Start":"11:13.743 ","End":"11:13.826","Text":"1 of the Render Workspace."},{"Start":"11:13.826 ","End":"11:21.280","Text":"In Day #29 or Part 2, we’ll take a look"},{"Start":"11:21.280 ","End":"11:23.679","Text":"at how to set up the environment, how to"},{"Start":"11:23.690 ","End":"11:26.214","Text":"set up lighting, and a few other details"},{"Start":"11:26.490 ","End":"11:29.240","Text":"to make the render look realistic… as well"},{"Start":"11:29.240 ","End":"11:31.610","Text":"as how to actually process the rendering."},{"Start":"11:31.610 ","End":"11:35.714","Text":"Click the link below in the video"},{"Start":"11:35.714 ","End":"11:35.735","Text":"description to watch Part 2 right now."}],"ID":29011},{"Watched":false,"Name":"Day 29 - Render a Product (Part 2 of 2)","Duration":"10m 48s","ChapterTopicVideoID":27808,"CourseChapterTopicPlaylistID":275347,"HasSubtitles":true,"ThumbnailPath":null,"UploadDate":null,"DurationForVideoObject":null,"Description":null,"MetaTitle":null,"MetaDescription":null,"Canonical":null,"VideoComments":[],"Subtitles":[{"Start":"00:00.120 ","End":"00:00.860","Text":"Kevin Kennedy: Hey there, It’s"},{"Start":"00:01.000 ","End":"00:02.800","Text":"Kevin Kennedy, and welcome to Day"},{"Start":"00:02.800 ","End":"00:06.580","Text":"#29 of Learn Fusion 360 in 30 days."},{"Start":"00:07.520 ","End":"00:09.400","Text":"This is a two-part video where you’ll"},{"Start":"00:09.410 ","End":"00:11.630","Text":"be able to set up a product to render"},{"Start":"00:11.800 ","End":"00:14.230","Text":"in Fusion 360’s Render Workspace."},{"Start":"00:15.040 ","End":"00:18.030","Text":"Be sure to watch Day #28 first if"},{"Start":"00:18.030 ","End":"00:19.909","Text":"you have not already watched it."},{"Start":"00:19.909 ","End":"00:21.900","Text":"We’ll take a look at how to set up and"},{"Start":"00:21.900 ","End":"00:24.520","Text":"change lighting, and how to process your"},{"Start":"00:24.520 ","End":"00:28.490","Text":"rendering locally or using the cloud."},{"Start":"00:28.750 ","End":"00:30.999","Text":"In part 1 we went ahead and applied"},{"Start":"00:31.020 ","End":"00:33.250","Text":"appearances and physical properties."},{"Start":"00:33.849 ","End":"00:35.779","Text":"Let’s go ahead and finish this render"},{"Start":"00:35.820 ","End":"00:38.030","Text":"off by setting up our environment."},{"Start":"00:38.800 ","End":"00:40.720","Text":"If you had closed the file after"},{"Start":"00:40.720 ","End":"00:43.060","Text":"Day #28 and you go to re-open"},{"Start":"00:43.060 ","End":"00:44.460","Text":"the file, you’ll notice that it"},{"Start":"00:44.460 ","End":"00:46.559","Text":"defaults to the Model workspace."},{"Start":"00:47.389 ","End":"00:49.219","Text":"Before we start to change any of"},{"Start":"00:49.219 ","End":"00:50.470","Text":"the lighting we’ll want to make"},{"Start":"00:50.470 ","End":"00:52.330","Text":"sure that we set the position of the"},{"Start":"00:52.330 ","End":"00:54.650","Text":"model….so if you’re in the Render"},{"Start":"00:54.660 ","End":"00:56.970","Text":"Workspace go ahead and switch to"},{"Start":"00:56.970 ","End":"00:59.360","Text":"the Model workspace by selecting"},{"Start":"00:59.360 ","End":"01:01.490","Text":"it in the workspace dropdown list."},{"Start":"01:03.690 ","End":"01:05.029","Text":"If you’re trying to create a"},{"Start":"01:05.030 ","End":"01:06.889","Text":"realistic product rendering I"},{"Start":"01:06.929 ","End":"01:09.039","Text":"always recommend taking a look at"},{"Start":"01:09.049 ","End":"01:11.029","Text":"how products are being advertised."},{"Start":"01:11.670 ","End":"01:13.120","Text":"This will save you some valuable"},{"Start":"01:13.120 ","End":"01:15.199","Text":"time as someone\u0027s already done some"},{"Start":"01:15.200 ","End":"01:17.110","Text":"of the research and work for us."},{"Start":"01:18.580 ","End":"01:20.460","Text":"If you do a quick google search you’ll"},{"Start":"01:20.460 ","End":"01:22.619","Text":"notice that most utility knives play on"},{"Start":"01:22.849 ","End":"01:24.579","Text":"the fact that they have a sharp blade…."},{"Start":"01:24.969 ","End":"01:27.000","Text":"so we’ll want to angle the knife to be"},{"Start":"01:27.000 ","End":"01:29.380","Text":"in a similar position...where the knife"},{"Start":"01:29.449 ","End":"01:31.430","Text":"essentially looks like it’s in use."},{"Start":"01:32.750 ","End":"01:34.740","Text":"Before we can use the move command"},{"Start":"01:34.820 ","End":"01:36.089","Text":"you’ll notice that we have some"},{"Start":"01:36.090 ","End":"01:38.000","Text":"grounded objects in this model."},{"Start":"01:38.389 ","End":"01:40.119","Text":"We’ll want to delete those first."},{"Start":"01:40.380 ","End":"01:42.259","Text":"I’ll simply click on both grounded"},{"Start":"01:42.259 ","End":"01:44.709","Text":"icons or the red thumbtack,"},{"Start":"01:45.230 ","End":"01:46.540","Text":"and I’ll hit the delete key."},{"Start":"01:49.520 ","End":"01:50.840","Text":"Next, I’ll hit the keyboard"},{"Start":"01:50.840 ","End":"01:54.240","Text":"shortcut letter “M” for Move/Copy."},{"Start":"01:54.670 ","End":"01:56.360","Text":"In the dialog box, we’ll want to"},{"Start":"01:56.360 ","End":"01:58.789","Text":"make sure the move object is set to"},{"Start":"01:58.820 ","End":"02:01.720","Text":"“Components.” Then, we’ll want to select"},{"Start":"02:01.740 ","End":"02:04.679","Text":"all of the components in the browser."},{"Start":"02:05.660 ","End":"02:07.560","Text":"I’ll hold down the shift key and"},{"Start":"02:07.560 ","End":"02:09.979","Text":"click on the right component, and"},{"Start":"02:09.979 ","End":"02:11.440","Text":"then I’ll select the bottom of the"},{"Start":"02:11.440 ","End":"02:14.160","Text":"list to select all 6 components."},{"Start":"02:15.809 ","End":"02:18.030","Text":"Next, I’ll use the viewcube to look"},{"Start":"02:18.030 ","End":"02:20.250","Text":"at the model from the right side… and"},{"Start":"02:20.250 ","End":"02:22.550","Text":"I’ll simply take the rotation slider"},{"Start":"02:22.959 ","End":"02:25.610","Text":"and drag it to the left...and I’m"},{"Start":"02:25.610 ","End":"02:28.140","Text":"just going to go to about 25 or 30"},{"Start":"02:28.140 ","End":"02:30.950","Text":"degrees… giving us a similar position"},{"Start":"02:30.980 ","End":"02:33.280","Text":"as if the knife were in use… and"},{"Start":"02:33.280 ","End":"02:35.530","Text":"I’ll click okay to save the changes."},{"Start":"02:37.639 ","End":"02:39.119","Text":"At this point, we’ll want to set"},{"Start":"02:39.120 ","End":"02:40.819","Text":"up the rest of the scene settings."},{"Start":"02:41.510 ","End":"02:43.079","Text":"We’ll first have to switch back to"},{"Start":"02:43.080 ","End":"02:44.740","Text":"the render workspace by selecting"},{"Start":"02:44.740 ","End":"02:46.910","Text":"“Render” in the workspace dropdown list."},{"Start":"02:49.460 ","End":"02:51.779","Text":"Now I’ll click on the lamp icon, or the"},{"Start":"02:51.780 ","End":"02:54.059","Text":"scene settings icon, in the toolbar."},{"Start":"02:54.910 ","End":"02:57.090","Text":"In the scene settings dialog box, you’ll"},{"Start":"02:57.090 ","End":"02:59.469","Text":"see that we have a ton of options to"},{"Start":"02:59.480 ","End":"03:01.450","Text":"alter the environment of our rendering."},{"Start":"03:03.050 ","End":"03:04.660","Text":"I’ll click on the “environment"},{"Start":"03:04.670 ","End":"03:06.740","Text":"library” tab...and you’ll notice"},{"Start":"03:06.740 ","End":"03:07.620","Text":"that there are a number of"},{"Start":"03:07.620 ","End":"03:09.290","Text":"lighting options that we can apply."},{"Start":"03:10.830 ","End":"03:12.440","Text":"Again, you’ll typically want to"},{"Start":"03:12.450 ","End":"03:13.700","Text":"think of the environment that"},{"Start":"03:13.700 ","End":"03:14.970","Text":"you’re product would be in."},{"Start":"03:15.460 ","End":"03:17.499","Text":"If your product is going to be outside"},{"Start":"03:17.820 ","End":"03:20.470","Text":"then you may want to use a warm light or"},{"Start":"03:20.470 ","End":"03:22.730","Text":"some of these other downloadable options."},{"Start":"03:24.330 ","End":"03:26.030","Text":"In our case, we want our product to"},{"Start":"03:26.030 ","End":"03:27.929","Text":"appear like it was shot in a studio"},{"Start":"03:27.940 ","End":"03:30.629","Text":"with a solid background… so we can try"},{"Start":"03:30.630 ","End":"03:32.429","Text":"out some of the other options here."},{"Start":"03:33.630 ","End":"03:35.789","Text":"To apply options simply drag"},{"Start":"03:35.789 ","End":"03:37.530","Text":"and drop them onto the canvas."},{"Start":"03:38.660 ","End":"03:41.600","Text":"I’ll drag “soft lights” over and you’ll"},{"Start":"03:41.600 ","End":"03:43.900","Text":"see how the scene automatically changes."},{"Start":"03:45.380 ","End":"03:47.489","Text":"You can also drag the scene directly"},{"Start":"03:47.490 ","End":"03:49.520","Text":"to the current environment above."},{"Start":"03:50.240 ","End":"03:52.269","Text":"I’ll select the photo booth option"},{"Start":"03:52.320 ","End":"03:54.670","Text":"and drag that above… and you’ll see"},{"Start":"03:56.380 ","End":"03:57.710","Text":"once again the lighting updates."},{"Start":"03:57.770 ","End":"04:02.320","Text":"Our utility knife is getting more"},{"Start":"04:02.320 ","End":"04:04.480","Text":"realistic but it’s also hard to see"},{"Start":"04:04.510 ","End":"04:06.620","Text":"exactly how the render will come out."},{"Start":"04:07.230 ","End":"04:09.849","Text":"Because of this, Fusion 360 has"},{"Start":"04:09.849 ","End":"04:11.830","Text":"the “in-canvas render” option."},{"Start":"04:12.900 ","End":"04:14.770","Text":"If you click the “In canvas render”"},{"Start":"04:14.770 ","End":"04:17.250","Text":"icon in the toolbar, you’ll see that the"},{"Start":"04:17.250 ","End":"04:19.730","Text":"model starts to render in real-time…."},{"Start":"04:20.260 ","End":"04:22.079","Text":"And it starts off pretty fuzzy as"},{"Start":"04:22.079 ","End":"04:23.610","Text":"it starts to use your computer\u0027s"},{"Start":"04:23.620 ","End":"04:25.510","Text":"CPU to render the image."},{"Start":"04:28.389 ","End":"04:29.929","Text":"As you see here we have a more"},{"Start":"04:30.030 ","End":"04:32.020","Text":"realistic preview of how the final"},{"Start":"04:32.020 ","End":"04:33.960","Text":"rendering will actually process…"},{"Start":"04:35.310 ","End":"04:37.320","Text":"now we can change the lights and"},{"Start":"04:37.330 ","End":"04:39.390","Text":"settings to better suit our needs."},{"Start":"04:40.679 ","End":"04:41.889","Text":"I want the highlight to be"},{"Start":"04:41.889 ","End":"04:43.489","Text":"a little bit sharper so I’ll"},{"Start":"04:43.490 ","End":"04:44.930","Text":"drag the “sharp highlights”"},{"Start":"04:44.930 ","End":"04:46.900","Text":"environment over to the canvas."},{"Start":"04:48.670 ","End":"04:50.800","Text":"After I release the new environment"},{"Start":"04:50.870 ","End":"04:52.650","Text":"you’ll notice that the in-canvas"},{"Start":"04:52.650 ","End":"04:55.010","Text":"rendering starts to process again."},{"Start":"04:56.620 ","End":"04:58.399","Text":"This will take quite a bit from your"},{"Start":"04:58.400 ","End":"05:00.770","Text":"computer\u0027s processing power...if"},{"Start":"05:00.770 ","End":"05:02.039","Text":"you’re going to make multiple"},{"Start":"05:02.040 ","End":"05:04.030","Text":"changes I’d recommend pausing the"},{"Start":"05:04.030 ","End":"05:06.160","Text":"in-canvas render by clicking on"},{"Start":"05:06.160 ","End":"05:08.860","Text":"it in the toolbar or by clicking"},{"Start":"05:08.860 ","End":"05:11.090","Text":"the pause icon in the lower-right."},{"Start":"05:13.530 ","End":"05:15.570","Text":"I’m also going to reposition the"},{"Start":"05:15.570 ","End":"05:18.020","Text":"utility knife so the top shows more."},{"Start":"05:18.660 ","End":"05:20.750","Text":"I’ll simply drag the viewcube around"},{"Start":"05:20.809 ","End":"05:23.140","Text":"until about ⅔ of the top is showing."},{"Start":"05:26.590 ","End":"05:28.760","Text":"I’ll resume the in-canvas render and"},{"Start":"05:28.760 ","End":"05:30.580","Text":"then click on the settings tab to see"},{"Start":"05:30.580 ","End":"05:32.530","Text":"what other options we’ll want to change."},{"Start":"05:33.520 ","End":"05:35.510","Text":"You’ll notice the ground section allows"},{"Start":"05:35.510 ","End":"05:36.960","Text":"us to toggle any ground shadows on or off."},{"Start":"05:39.730 ","End":"05:41.080","Text":"I don’t want any ground"},{"Start":"05:41.080 ","End":"05:43.470","Text":"shadows for this perspective..."},{"Start":"05:43.760 ","End":"05:45.700","Text":"so I’ll make sure it’s turned off."},{"Start":"05:47.360 ","End":"05:49.539","Text":"In the environment section, you\u0027ll notice"},{"Start":"05:49.540 ","End":"05:51.260","Text":"that we can change the brightness of the"},{"Start":"05:51.260 ","End":"05:53.849","Text":"scene along with the background color."},{"Start":"05:54.880 ","End":"05:56.570","Text":"I want to change the background to a"},{"Start":"05:56.570 ","End":"05:58.589","Text":"light gray so I’ll select the color"},{"Start":"05:58.590 ","End":"06:02.719","Text":"box… move the color picker… and hit"},{"Start":"06:02.750 ","End":"06:06.349","Text":"apply and okay… and you’ll notice the"},{"Start":"06:06.360 ","End":"06:08.630","Text":"background color updates accordingly."},{"Start":"06:10.440 ","End":"06:12.010","Text":"The rest of the settings allow"},{"Start":"06:12.010 ","End":"06:14.140","Text":"you to alter the camera and focal"},{"Start":"06:14.140 ","End":"06:15.719","Text":"length along with saving your"},{"Start":"06:15.719 ","End":"06:18.169","Text":"settings as defaults..which can be"},{"Start":"06:18.170 ","End":"06:19.930","Text":"quite helpful if you need to make"},{"Start":"06:19.970 ","End":"06:20.909","Text":"a number of different renderings."},{"Start":"06:22.950 ","End":"06:24.930","Text":"These settings are more advanced so we"},{"Start":"06:24.930 ","End":"06:27.050","Text":"won’t be going over them in this video."},{"Start":"06:27.130 ","End":"06:27.356","Text":"If you’d like to see more videos"},{"Start":"06:27.356 ","End":"06:27.622","Text":"on rendering, including some of"},{"Start":"06:27.622 ","End":"06:27.887","Text":"the advanced features then let"},{"Start":"06:27.887 ","End":"06:28.206","Text":"me know in the comments below."},{"Start":"06:28.260 ","End":"06:31.020","Text":"For now, I’ll hit the close button to"},{"Start":"06:31.020 ","End":"06:33.530","Text":"close the scene settings dialog box."},{"Start":"06:34.690 ","End":"06:36.319","Text":"At this point, if we’re ready"},{"Start":"06:36.320 ","End":"06:37.979","Text":"to render the model we can click"},{"Start":"06:37.980 ","End":"06:39.950","Text":"the “render” icon in the toolbar."},{"Start":"06:41.570 ","End":"06:43.100","Text":"The first thing you’ll notice in"},{"Start":"06:43.100 ","End":"06:44.849","Text":"the render dialog box is that it"},{"Start":"06:44.860 ","End":"06:47.409","Text":"has predetermined settings depending"},{"Start":"06:47.410 ","End":"06:49.000","Text":"on what you need the image for."},{"Start":"06:50.349 ","End":"06:52.660","Text":"For this tutorial, I’ll select “Web.”"},{"Start":"06:53.199 ","End":"06:54.970","Text":"It’s also important to note that the"},{"Start":"06:54.970 ","End":"06:57.610","Text":"last option is custom, which gives"},{"Start":"06:57.610 ","End":"06:59.669","Text":"you the most amount of customization."},{"Start":"07:01.240 ","End":"07:03.460","Text":"Back in the “Web” section, you’ll notice"},{"Start":"07:03.460 ","End":"07:05.419","Text":"that it has a few different aspect ratios."},{"Start":"07:06.420 ","End":"07:08.219","Text":"I’ll select the 3rd one, which"},{"Start":"07:08.219 ","End":"07:09.799","Text":"has the highest resolution."},{"Start":"07:11.799 ","End":"07:13.719","Text":"The next section is the “render"},{"Start":"07:13.720 ","End":"07:15.260","Text":"with” section where you can choose"},{"Start":"07:15.260 ","End":"07:17.670","Text":"between cloud or local rendering."},{"Start":"07:18.590 ","End":"07:20.520","Text":"Local rendering means it will render the"},{"Start":"07:20.530 ","End":"07:23.270","Text":"image solely using your computer\u0027s CPU."},{"Start":"07:24.219 ","End":"07:26.120","Text":"Therefore, the amount of time that"},{"Start":"07:26.120 ","End":"07:27.620","Text":"your rendering will take really"},{"Start":"07:27.620 ","End":"07:30.000","Text":"depends on the power of your computer."},{"Start":"07:30.930 ","End":"07:32.650","Text":"It’s also important to note that"},{"Start":"07:32.650 ","End":"07:34.600","Text":"should you choose to render locally"},{"Start":"07:34.850 ","End":"07:36.750","Text":"you may not be able to perform too"},{"Start":"07:36.750 ","End":"07:38.729","Text":"many other functions on your computer…"},{"Start":"07:39.110 ","End":"07:41.110","Text":"but it really all depends on the"},{"Start":"07:41.120 ","End":"07:43.060","Text":"specs of your computer\u0027s hardware."},{"Start":"07:44.740 ","End":"07:47.180","Text":"The other option, which is cloud"},{"Start":"07:47.180 ","End":"07:49.429","Text":"rendering, will use Fusion 360"},{"Start":"07:49.430 ","End":"07:51.450","Text":"servers to process your render."},{"Start":"07:52.560 ","End":"07:54.350","Text":"This means it won’t rely on your local"},{"Start":"07:54.350 ","End":"07:58.440","Text":"machine at all… and you can continue to"},{"Start":"07:58.440 ","End":"08:01.579","Text":"work on another angle or another project."},{"Start":"08:02.700 ","End":"08:04.369","Text":"One thing that causes a lot of"},{"Start":"08:04.369 ","End":"08:05.879","Text":"confusion with cloud rendering"},{"Start":"08:05.930 ","End":"08:07.729","Text":"is that it requires credits."},{"Start":"08:08.200 ","End":"08:09.460","Text":"You’ll see that it says this"},{"Start":"08:09.460 ","End":"08:11.530","Text":"render requires 1 cloud credit."},{"Start":"08:12.610 ","End":"08:14.960","Text":"Depending on what Fusion 360 license"},{"Start":"08:14.960 ","End":"08:17.489","Text":"you are using, such as the education"},{"Start":"08:17.490 ","End":"08:19.559","Text":"license, you’ll be given credits"},{"Start":"08:19.570 ","End":"08:22.260","Text":"for free, but you are limited on"},{"Start":"08:22.449 ","End":"08:24.319","Text":"how many you can actually use."},{"Start":"08:25.410 ","End":"08:27.359","Text":"The number of credits really depends on"},{"Start":"08:27.360 ","End":"08:30.349","Text":"the license and this does change from time"},{"Start":"08:30.350 ","End":"08:32.659","Text":"to time so I’ll try to put a link in the"},{"Start":"08:32.669 ","End":"08:35.949","Text":"video description to the Autodesk website"},{"Start":"08:35.990 ","End":"08:38.030","Text":"where you can learn more about credits."},{"Start":"08:39.179 ","End":"08:41.390","Text":"In summary, the higher the resolution"},{"Start":"08:41.390 ","End":"08:43.000","Text":"of your rendering, the more credits"},{"Start":"08:43.000 ","End":"08:44.840","Text":"you will need to process the rendering."},{"Start":"08:47.120 ","End":"08:48.550","Text":"The other option you’re able to"},{"Start":"08:48.550 ","End":"08:50.500","Text":"change is the render quality."},{"Start":"08:51.340 ","End":"08:53.929","Text":"Standard will render your model at a lower"},{"Start":"08:53.929 ","End":"08:56.170","Text":"quality - which is great if you’re trying"},{"Start":"08:56.170 ","End":"08:58.740","Text":"to test the outcome of the render or for"},{"Start":"08:58.740 ","End":"09:00.530","Text":"various reasons where the quality of your"},{"Start":"09:00.550 ","End":"09:02.720","Text":"image does not need to be the highest."},{"Start":"09:03.900 ","End":"09:06.320","Text":"Contrary, the final selection will"},{"Start":"09:06.320 ","End":"09:08.400","Text":"output a very high-quality render."},{"Start":"09:09.040 ","End":"09:10.450","Text":"These renders will take longer"},{"Start":"09:10.450 ","End":"09:12.640","Text":"to process so you’ll only want to"},{"Start":"09:12.640 ","End":"09:14.639","Text":"use these when you need “final”"},{"Start":"09:14.860 ","End":"09:16.680","Text":"or finished quality renderings."},{"Start":"09:17.840 ","End":"09:20.280","Text":"I’m going to set the options"},{"Start":"09:20.280 ","End":"09:22.790","Text":"to cloud render and final and"},{"Start":"09:22.790 ","End":"09:24.430","Text":"click the blue “render” button."},{"Start":"09:25.490 ","End":"09:27.099","Text":"This will save the file and"},{"Start":"09:27.099 ","End":"09:28.629","Text":"submit the render to the cloud."},{"Start":"09:29.219 ","End":"09:31.290","Text":"You’ll notice it also adds the image"},{"Start":"09:31.290 ","End":"09:33.030","Text":"to the rendering gallery below."},{"Start":"09:33.549 ","End":"09:34.959","Text":"If you click on the image in the"},{"Start":"09:34.959 ","End":"09:36.930","Text":"gallery you’ll notice it opens"},{"Start":"09:36.959 ","End":"09:38.720","Text":"the image up and shows you the"},{"Start":"09:38.720 ","End":"09:40.569","Text":"approximate amount of time left."},{"Start":"09:41.630 ","End":"09:43.850","Text":"The amount of time for cloud rendering"},{"Start":"09:43.860 ","End":"09:45.700","Text":"varies based on how many files"},{"Start":"09:45.719 ","End":"09:47.589","Text":"are being rendered at any given"},{"Start":"09:47.590 ","End":"09:51.330","Text":"time...and the size and quality of"},{"Start":"09:51.410 ","End":"09:53.189","Text":"rendering that you have submitted."},{"Start":"09:55.000 ","End":"09:57.270","Text":"You can also cancel the render should"},{"Start":"09:57.270 ","End":"09:59.170","Text":"you decide you no longer need it."},{"Start":"10:00.580 ","End":"10:01.900","Text":"At this point, you can also"},{"Start":"10:01.900 ","End":"10:03.660","Text":"submit other renders to the cloud."},{"Start":"10:04.410 ","End":"10:05.979","Text":"For example, I may want to"},{"Start":"10:05.980 ","End":"10:07.569","Text":"use the viewcube to change"},{"Start":"10:07.570 ","End":"10:09.060","Text":"the perspective of the model."},{"Start":"10:09.809 ","End":"10:11.850","Text":"I could hit render again...and"},{"Start":"10:11.850 ","End":"10:13.220","Text":"submit this one to the cloud as"},{"Start":"10:13.220 ","End":"10:15.870","Text":"well… and I could continue to do so"},{"Start":"10:15.900 ","End":"10:17.680","Text":"for as many renderings as I need."},{"Start":"10:19.210 ","End":"10:20.730","Text":"For the sake of this tutorial,"},{"Start":"10:20.770 ","End":"10:22.180","Text":"I’m going to speed up the time"},{"Start":"10:22.300 ","End":"10:23.930","Text":"it takes for the image to render."},{"Start":"10:25.090 ","End":"10:26.769","Text":"When the image is done you’ll"},{"Start":"10:26.770 ","End":"10:28.730","Text":"see that it displays a preview"},{"Start":"10:28.809 ","End":"10:30.029","Text":"in the rendering gallery."},{"Start":"10:30.969 ","End":"10:32.420","Text":"Now when you click on it you’ll"},{"Start":"10:32.420 ","End":"10:33.580","Text":"see that you can download the"},{"Start":"10:33.580 ","End":"10:35.010","Text":"image to your local machine."},{"Start":"10:35.010 ","End":"10:48.700","Text":"Hopefully, this 2 part video on"},{"Start":"10:48.700 ","End":"10:48.701","Text":"rendering gave you guys a solid"},{"Start":"10:48.701 ","End":"10:48.702","Text":"understanding of the foundational skills"},{"Start":"10:48.702 ","End":"10:48.703","Text":"to producing renderings in Fusion 360."},{"Start":"10:48.703 ","End":"10:48.705","Text":"If you would like to see more videos"},{"Start":"10:48.705 ","End":"10:48.707","Text":"on rendering, including some of the"},{"Start":"10:48.707 ","End":"10:48.709","Text":"advanced features...and how to make your"},{"Start":"10:48.709 ","End":"10:48.713","Text":"renderings as realistic as possible, then"},{"Start":"10:48.713 ","End":"10:48.735","Text":"be sure to comment below and let me know."}],"ID":29012},{"Watched":false,"Name":"Day 30 - Animate Your Product","Duration":"12m 44s","ChapterTopicVideoID":27809,"CourseChapterTopicPlaylistID":275347,"HasSubtitles":true,"ThumbnailPath":null,"UploadDate":null,"DurationForVideoObject":null,"Description":null,"MetaTitle":null,"MetaDescription":null,"Canonical":null,"VideoComments":[],"Subtitles":[{"Start":"00:00.050 ","End":"00:00.900","Text":"Kevin Kennedy: Hey there, It’s"},{"Start":"00:00.900 ","End":"00:02.890","Text":"Kevin Kennedy, and welcome to Day"},{"Start":"00:02.890 ","End":"00:06.359","Text":"#30 of Learn Fusion 360 in 30 days."},{"Start":"00:06.880 ","End":"00:09.180","Text":"By the end of this tutorial, you’ll"},{"Start":"00:09.190 ","End":"00:11.389","Text":"be able to animate an assembly file"},{"Start":"00:11.429 ","End":"00:14.070","Text":"in Fusion 360’s Animation Workspace."},{"Start":"00:14.759 ","End":"00:16.550","Text":"We’ll take a look at the animation"},{"Start":"00:16.600 ","End":"00:19.590","Text":"interface, how to create camera views,"},{"Start":"00:20.080 ","End":"00:22.300","Text":"how to manually explode components,"},{"Start":"00:22.840 ","End":"00:25.040","Text":"how to show or hide components,"},{"Start":"00:25.690 ","End":"00:27.850","Text":"and how to annotate components."},{"Start":"00:27.850 ","End":"00:27.895","Text":"Before we get started I want to"},{"Start":"00:27.895 ","End":"00:27.934","Text":"give a shoutout to my subscribers"},{"Start":"00:27.934 ","End":"00:27.966","Text":"who have been following from"},{"Start":"00:27.966 ","End":"00:28.005","Text":"the first few videos I’ve made."},{"Start":"00:28.005 ","End":"00:28.057","Text":"This series has come a long way and"},{"Start":"00:28.057 ","End":"00:28.095","Text":"hopefully many of you have learned"},{"Start":"00:28.095 ","End":"00:28.141","Text":"valuable tips and tricks as well as"},{"Start":"00:28.141 ","End":"00:28.173","Text":"some different Fusion 360 workflows."},{"Start":"00:28.173 ","End":"00:28.212","Text":"I’ll be releasing some more sculpting"},{"Start":"00:28.212 ","End":"00:28.264","Text":"videos in the coming weeks… so if you"},{"Start":"00:28.264 ","End":"00:28.309","Text":"have any suggestions on objects that you"},{"Start":"00:28.309 ","End":"00:28.361","Text":"would like to see sculpted then be sure"},{"Start":"00:28.361 ","End":"00:28.412","Text":"to head down to the comments section right"},{"Start":"00:28.412 ","End":"00:28.471","Text":"now and let me know what your ideas are."},{"Start":"00:28.471 ","End":"00:28.522","Text":"For this demo, I’ll be using a tank"},{"Start":"00:28.522 ","End":"00:28.561","Text":"assembly file, which you can download"},{"Start":"00:28.561 ","End":"00:28.600","Text":"in the video description, or by"},{"Start":"00:28.600 ","End":"00:28.645","Text":"going to the link on your screen."},{"Start":"00:28.645 ","End":"00:28.652","Text":"-https://a360.co/2BQhDN1"},{"Start":"00:28.652 ","End":"00:28.697","Text":"The link will take you to the"},{"Start":"00:28.697 ","End":"00:28.736","Text":"Fusion 360 Hub where you’ll have"},{"Start":"00:28.736 ","End":"00:28.775","Text":"to click the blue download button."},{"Start":"00:28.775 ","End":"00:28.807","Text":"Then, you’ll want to select"},{"Start":"00:28.807 ","End":"00:28.840","Text":"the Fusion 360 archive file."},{"Start":"00:28.840 ","End":"00:28.891","Text":"This will prompt you to enter your email"},{"Start":"00:28.891 ","End":"00:28.943","Text":"where it will send the file download link."},{"Start":"00:28.943 ","End":"00:28.988","Text":"Once you have the file in your"},{"Start":"00:28.988 ","End":"00:29.021","Text":"downloads folder you’ll want to"},{"Start":"00:29.021 ","End":"00:29.066","Text":"upload the file to your data panel."},{"Start":"00:29.066 ","End":"00:29.111","Text":"Click the data panel icon in the"},{"Start":"00:29.111 ","End":"00:29.144","Text":"upper left-hand corner, make sure"},{"Start":"00:29.144 ","End":"00:29.189","Text":"you’re in a project folder, and then"},{"Start":"00:29.189 ","End":"00:29.228","Text":"you’ll see the blue upload icon."},{"Start":"00:29.228 ","End":"00:29.260","Text":"After selecting upload you’ll be"},{"Start":"00:29.260 ","End":"00:29.299","Text":"prompted to select the file from"},{"Start":"00:29.299 ","End":"00:29.331","Text":"your computer and hit upload."},{"Start":"00:29.331 ","End":"00:29.377","Text":"Once the file is uploaded you can"},{"Start":"00:29.377 ","End":"00:29.435","Text":"double click on the file to open it up."},{"Start":"00:29.435 ","End":"00:29.493","Text":"Now that I have the file open, I’ll want"},{"Start":"00:29.500 ","End":"00:30.160","Text":"to switch to the Animation workspace."},{"Start":"00:30.160 ","End":"00:31.169","Text":"To switch workspaces simply"},{"Start":"00:31.170 ","End":"00:32.770","Text":"click the workspace dropdown"},{"Start":"00:32.780 ","End":"00:35.050","Text":"list and select Animation."},{"Start":"00:36.130 ","End":"00:37.490","Text":"Before I get started with some"},{"Start":"00:37.490 ","End":"00:39.330","Text":"of the animation basics, I want"},{"Start":"00:39.330 ","End":"00:41.040","Text":"to point out the general purpose"},{"Start":"00:41.090 ","End":"00:42.519","Text":"of the animation workspace."},{"Start":"00:43.120 ","End":"00:45.220","Text":"There really are two main purposes of"},{"Start":"00:45.220 ","End":"00:47.389","Text":"the animation workspace, which is to"},{"Start":"00:47.420 ","End":"00:49.900","Text":"animate how a design should be operated,"},{"Start":"00:50.509 ","End":"00:52.889","Text":"or the second purpose is to animate"},{"Start":"00:52.900 ","End":"00:54.800","Text":"how a design should be assembled."},{"Start":"00:55.660 ","End":"00:57.780","Text":"The reason I wanted to point this out is"},{"Start":"00:57.780 ","End":"00:59.970","Text":"to note that the animation workspace is"},{"Start":"01:00.000 ","End":"01:02.640","Text":"not a full-fledged animation software."},{"Start":"01:03.389 ","End":"01:04.780","Text":"If you’re looking to create"},{"Start":"01:04.789 ","End":"01:07.210","Text":"photo-realistic, or very complex"},{"Start":"01:07.219 ","End":"01:10.059","Text":"animations, then Fusion 360 may"},{"Start":"01:10.059 ","End":"01:11.579","Text":"not be the software for you."},{"Start":"01:13.220 ","End":"01:15.350","Text":"Another thing to note is that your file"},{"Start":"01:15.360 ","End":"01:17.150","Text":"must have components set up for the"},{"Start":"01:17.150 ","End":"01:20.190","Text":"animation workspace to work… the animation"},{"Start":"01:20.190 ","End":"01:22.410","Text":"commands will not work with bodies."},{"Start":"01:23.670 ","End":"01:25.461","Text":"With that said, let’s start looking"},{"Start":"01:25.461 ","End":"01:27.119","Text":"at how to use the Animation Workspace."},{"Start":"01:28.119 ","End":"01:29.519","Text":"First off, you’ll notice the"},{"Start":"01:29.520 ","End":"01:30.979","Text":"animation workspace has a"},{"Start":"01:31.040 ","End":"01:32.750","Text":"timeline section at the bottom."},{"Start":"01:33.360 ","End":"01:34.810","Text":"This is where all the actions"},{"Start":"01:34.810 ","End":"01:36.289","Text":"will be recorded...and we’ll"},{"Start":"01:36.290 ","End":"01:37.890","Text":"get to that in just a bit."},{"Start":"01:38.889 ","End":"01:40.890","Text":"Just to the left of a timeline is"},{"Start":"01:40.890 ","End":"01:43.399","Text":"the “scratch zone.” If you move the"},{"Start":"01:43.410 ","End":"01:45.619","Text":"timeline playhead to the scratch zone,"},{"Start":"01:46.049 ","End":"01:47.979","Text":"none of the actions will be recorded."},{"Start":"01:48.570 ","End":"01:50.240","Text":"So you’ll want to move the playhead"},{"Start":"01:50.240 ","End":"01:51.640","Text":"here any time you want to take a"},{"Start":"01:51.640 ","End":"01:53.460","Text":"look at your model but you don’t"},{"Start":"01:53.460 ","End":"01:54.850","Text":"want the change of perspective to"},{"Start":"01:54.860 ","End":"01:57.100","Text":"be included in the final animation."},{"Start":"01:58.679 ","End":"02:00.360","Text":"In the lower left-hand corner,"},{"Start":"02:00.380 ","End":"02:02.550","Text":"you’ll see it says “Storyboard1.”"},{"Start":"02:03.190 ","End":"02:05.090","Text":"You can think of each storyboard as"},{"Start":"02:05.090 ","End":"02:07.570","Text":"its own unique design or animation."},{"Start":"02:08.150 ","End":"02:10.160","Text":"You can create more storyboards by"},{"Start":"02:10.160 ","End":"02:12.329","Text":"clicking the plus sign...and you’ll"},{"Start":"02:12.330 ","End":"02:14.380","Text":"notice in the dialog box that they can"},{"Start":"02:14.380 ","End":"02:18.590","Text":"be clean, as in created from scratch...or"},{"Start":"02:18.610 ","End":"02:21.240","Text":"they can be sequential or starting from"},{"Start":"02:21.240 ","End":"02:22.770","Text":"the end of the previous storyboard."},{"Start":"02:22.910 ","End":"02:23.562","Text":"Lastly, I’ll just point out that the"},{"Start":"02:23.562 ","End":"02:23.857","Text":"display settings are moved to the top"},{"Start":"02:23.857 ","End":"02:24.110","Text":"of the animation workspace because the"},{"Start":"02:24.110 ","End":"02:24.447","Text":"timeline takes up so much of the bottom."},{"Start":"02:24.490 ","End":"02:26.220","Text":"You can also rename each"},{"Start":"02:26.230 ","End":"02:27.830","Text":"storyboard by double-clicking"},{"Start":"02:27.830 ","End":"02:29.750","Text":"on it or by right-clicking."},{"Start":"02:30.750 ","End":"02:32.989","Text":"I’ll right-click and select “rename”"},{"Start":"02:33.050 ","End":"02:35.220","Text":"and then I’ll type out “Explode Demo.”"},{"Start":"02:35.220 ","End":"02:47.480","Text":"The first thing you can do in"},{"Start":"02:47.480 ","End":"02:49.350","Text":"the animation workspace is record"},{"Start":"02:49.350 ","End":"02:51.160","Text":"changes in the camera view."},{"Start":"02:51.639 ","End":"02:53.160","Text":"You’ll notice in the toolbar we"},{"Start":"02:53.160 ","End":"02:55.040","Text":"have the “view” option with a red"},{"Start":"02:55.049 ","End":"02:57.649","Text":"dot… which means, that by default"},{"Start":"02:57.660 ","End":"02:59.289","Text":"the camera view is recording."},{"Start":"03:00.000 ","End":"03:01.900","Text":"So to create our first action on the"},{"Start":"03:01.910 ","End":"03:03.970","Text":"timeline all we have to do is move the"},{"Start":"03:04.900 ","End":"03:07.390","Text":"playhead further out in our timeline...so"},{"Start":"03:07.390 ","End":"03:09.810","Text":"I’ll move it to about 2 seconds… and"},{"Start":"03:09.810 ","End":"03:11.620","Text":"then we can change the camera view."},{"Start":"03:12.460 ","End":"03:14.039","Text":"You’ll notice that automatically"},{"Start":"03:14.040 ","End":"03:16.419","Text":"created the camera action...and if"},{"Start":"03:16.420 ","End":"03:19.540","Text":"I hit “spacebar” OR the play button"},{"Start":"03:19.540 ","End":"03:21.450","Text":"below, you’ll see our model animates,"},{"Start":"03:22.290 ","End":"03:24.370","Text":"following the change in camera view."},{"Start":"03:26.130 ","End":"03:28.900","Text":"If I drag the playhead out to 4 seconds."},{"Start":"03:29.030 ","End":"03:31.380","Text":"This time I’ll use the free orbit tool"},{"Start":"03:31.540 ","End":"03:34.509","Text":"to move the model around… once again"},{"Start":"03:34.520 ","End":"03:36.820","Text":"creating an action in the timeline below."},{"Start":"03:37.540 ","End":"03:39.390","Text":"If I hit the play button again"},{"Start":"03:39.640 ","End":"03:41.060","Text":"you’ll notice that the free orbit"},{"Start":"03:41.080 ","End":"03:43.050","Text":"was also successfully recorded."},{"Start":"03:44.480 ","End":"03:45.920","Text":"You’ll also notice that you can"},{"Start":"03:45.920 ","End":"03:47.880","Text":"change the length of each action in"},{"Start":"03:47.880 ","End":"03:49.719","Text":"the timeline by simply dragging the"},{"Start":"03:49.719 ","End":"03:52.969","Text":"ends in either direction… or, of"},{"Start":"03:52.969 ","End":"03:54.649","Text":"course, you can also move the action"},{"Start":"03:54.660 ","End":"03:56.750","Text":"around the timeline by sliding it."},{"Start":"03:57.510 ","End":"03:59.330","Text":"You can also double click on each"},{"Start":"03:59.330 ","End":"04:00.970","Text":"action if you’d like to type out"},{"Start":"04:01.010 ","End":"04:03.370","Text":"a specific start and end time."},{"Start":"04:05.820 ","End":"04:08.140","Text":"Because the record view is active by"},{"Start":"04:08.150 ","End":"04:10.190","Text":"default, there may be a time where"},{"Start":"04:10.190 ","End":"04:11.880","Text":"you don’t want to record the view."},{"Start":"04:12.459 ","End":"04:14.260","Text":"If you’d like to turn it off simply hit"},{"Start":"04:14.260 ","End":"04:17.690","Text":"the keyboard shortcut CMD + R on Mac or"},{"Start":"04:17.870 ","End":"04:21.439","Text":"CTRL + R on Windows, or you can turn it"},{"Start":"04:21.440 ","End":"04:23.670","Text":"off by selecting “view” in the toolbar…"},{"Start":"04:25.469 ","End":"04:27.940","Text":"and because it’s easy to forget whether"},{"Start":"04:27.940 ","End":"04:29.699","Text":"this is turned off or not you’ll notice"},{"Start":"04:29.809 ","End":"04:31.710","Text":"the Fusion Engineers have gone ahead"},{"Start":"04:32.020 ","End":"04:34.110","Text":"and put this big red text at the top"},{"Start":"04:34.510 ","End":"04:36.930","Text":"noting that the “view is not recording.”"},{"Start":"04:38.460 ","End":"04:40.779","Text":"For now, let\u0027s delete these sample actions"},{"Start":"04:40.780 ","End":"04:43.190","Text":"by right-clicking and selecting “delete.”"},{"Start":"04:44.599 ","End":"04:46.429","Text":"I’m going to put the model back in"},{"Start":"04:46.430 ","End":"04:48.219","Text":"the home position by selecting the"},{"Start":"04:48.220 ","End":"04:49.830","Text":"home icon next to the viewcube."},{"Start":"04:51.490 ","End":"04:52.790","Text":"Now we’ll take a look at how to"},{"Start":"04:52.790 ","End":"04:54.590","Text":"manually explode the model, which"},{"Start":"04:54.590 ","End":"04:56.050","Text":"will give the viewer a better"},{"Start":"04:56.050 ","End":"04:57.820","Text":"idea of how it was assembled."},{"Start":"04:59.980 ","End":"05:01.490","Text":"First, I’ll select the turret"},{"Start":"05:01.509 ","End":"05:03.879","Text":"component in the Fusion 360 browser."},{"Start":"05:04.650 ","End":"05:06.679","Text":"Then, I’ll select the keyboard shortcut"},{"Start":"05:06.680 ","End":"05:09.570","Text":"letter “E” OR you can select “manual"},{"Start":"05:09.570 ","End":"05:12.240","Text":"explode” from the transform dropdown list."},{"Start":"05:13.680 ","End":"05:15.070","Text":"You’ll see this prompts us to"},{"Start":"05:15.070 ","End":"05:17.229","Text":"select an arrow or the direction"},{"Start":"05:17.230 ","End":"05:19.030","Text":"we want the component to explode."},{"Start":"05:19.780 ","End":"05:21.750","Text":"I want the turret to move straight up"},{"Start":"05:21.770 ","End":"05:24.850","Text":"so I’ll select the “Y” axis arrow...and"},{"Start":"05:24.850 ","End":"05:26.750","Text":"I’ll adjust the explosion scale"},{"Start":"05:26.750 ","End":"05:29.659","Text":"arrow so the turret is up in the air…"},{"Start":"05:30.340 ","End":"05:31.900","Text":"and I’ll hit the green checkmark."},{"Start":"05:33.400 ","End":"05:34.969","Text":"Now if I hit the play button"},{"Start":"05:35.050 ","End":"05:37.520","Text":"you’ll see the turret moves up…"},{"Start":"05:39.370 ","End":"05:41.069","Text":"Let’s go ahead and repeat these"},{"Start":"05:41.070 ","End":"05:42.760","Text":"steps for the shell of the tank."},{"Start":"05:43.560 ","End":"05:45.660","Text":"I’ll select the shell component and hit"},{"Start":"05:45.660 ","End":"05:48.460","Text":"the keyboard shortcut letter “E.” I’ll"},{"Start":"05:48.460 ","End":"05:51.220","Text":"hit the up arrow and then I’ll drag the"},{"Start":"05:51.350 ","End":"05:54.090","Text":"playhead slider over to about 5 seconds."},{"Start":"05:54.639 ","End":"05:57.409","Text":"I’ll also adjust the explosion scale so"},{"Start":"05:57.410 ","End":"05:59.900","Text":"the shell moves up along the “Y” axis,"},{"Start":"06:01.080 ","End":"06:04.560","Text":"but not quite as far as the turret… and"},{"Start":"06:04.560 ","End":"06:05.849","Text":"then I’ll click that green checkmark."},{"Start":"06:08.980 ","End":"06:11.520","Text":"If I hit spacebar to play the animation"},{"Start":"06:11.540 ","End":"06:13.280","Text":"you’ll see that the turret now moves"},{"Start":"06:13.290 ","End":"06:15.930","Text":"first, followed by the shell of the tank."},{"Start":"06:17.510 ","End":"06:18.880","Text":"If we want the view to change"},{"Start":"06:18.889 ","End":"06:20.580","Text":"as well then we can create a"},{"Start":"06:20.580 ","End":"06:22.370","Text":"view action in the timeline."},{"Start":"06:23.350 ","End":"06:24.989","Text":"I’ll drag the playhead to about"},{"Start":"06:25.020 ","End":"06:26.710","Text":"3 seconds, and then I’ll change"},{"Start":"06:26.710 ","End":"06:28.409","Text":"the view using the viewcube."},{"Start":"06:29.740 ","End":"06:31.450","Text":"Now if I hit the “back to storyboard"},{"Start":"06:31.450 ","End":"06:33.380","Text":"beginning” button and then hit"},{"Start":"06:33.380 ","End":"06:35.180","Text":"play… you’ll see that our model"},{"Start":"06:35.190 ","End":"06:37.370","Text":"explodes as the view changes."},{"Start":"06:39.350 ","End":"06:41.220","Text":"The next animation feature I want to"},{"Start":"06:41.260 ","End":"06:44.030","Text":"show you is the show/hide command."},{"Start":"06:45.080 ","End":"06:47.330","Text":"First, let’s set up another camera view."},{"Start":"06:47.790 ","End":"06:49.300","Text":"I’ll drag the slider to about"},{"Start":"06:49.349 ","End":"06:51.159","Text":"6 seconds, and then I’ll select"},{"Start":"06:51.160 ","End":"06:52.870","Text":"the top corner of the viewcube."},{"Start":"06:54.190 ","End":"06:56.220","Text":"If I wanted the remainder of the animation"},{"Start":"06:56.220 ","End":"06:58.540","Text":"to focus on the wheel assemblies, then"},{"Start":"06:58.540 ","End":"07:00.570","Text":"I may want to hide the turret and shell"},{"Start":"07:00.570 ","End":"07:02.370","Text":"components to get them out of the way."},{"Start":"07:03.320 ","End":"07:05.309","Text":"Holding down the shift key I’ll"},{"Start":"07:05.309 ","End":"07:07.789","Text":"select the shell component and then"},{"Start":"07:07.870 ","End":"07:09.729","Text":"the turret component… and I can"},{"Start":"07:09.730 ","End":"07:11.560","Text":"select them either in the canvas"},{"Start":"07:11.560 ","End":"07:14.360","Text":"window or in the Fusion 360 browser."},{"Start":"07:15.750 ","End":"07:17.730","Text":"Then, I simply have to select the"},{"Start":"07:17.730 ","End":"07:20.400","Text":"“show/hide” option in the toolbar."},{"Start":"07:21.510 ","End":"07:23.720","Text":"You’ll see this added the show/hide"},{"Start":"07:23.720 ","End":"07:25.649","Text":"action to the timeline...so let’s"},{"Start":"07:25.650 ","End":"07:27.249","Text":"hit the back to the beginning button."},{"Start":"07:27.849 ","End":"07:29.399","Text":"I’ll also want to make sure that the"},{"Start":"07:29.400 ","End":"07:31.440","Text":"components are turned on at the beginning…"},{"Start":"07:32.000 ","End":"07:33.760","Text":"and then I’ll hit the play button."},{"Start":"07:38.410 ","End":"07:40.489","Text":"Like any actions, I can move the ends"},{"Start":"07:40.490 ","End":"07:42.619","Text":"around to shorten or lengthen them."},{"Start":"07:43.020 ","End":"07:44.659","Text":"I’ll go ahead and drag the turret"},{"Start":"07:44.700 ","End":"07:47.180","Text":"hide action to the left, so the turret"},{"Start":"07:47.219 ","End":"07:49.040","Text":"hides before the shell component."},{"Start":"07:50.510 ","End":"07:52.130","Text":"Next, I’ll drag the slider"},{"Start":"07:52.130 ","End":"07:54.130","Text":"out to 8 seconds and then I’ll"},{"Start":"07:54.140 ","End":"07:56.030","Text":"zoom in using my mouse wheel."},{"Start":"07:57.130 ","End":"07:59.390","Text":"This will create a camera action… and"},{"Start":"07:59.390 ","End":"08:01.229","Text":"if I drag the slider to the beginning"},{"Start":"08:01.230 ","End":"08:04.080","Text":"of the action and hit my spacebar you’ll"},{"Start":"08:04.080 ","End":"08:06.440","Text":"see it zooms in nice and steady for us."},{"Start":"08:09.480 ","End":"08:10.990","Text":"Now one thing you’ll notice with this"},{"Start":"08:10.990 ","End":"08:12.870","Text":"file is that the tires are actually"},{"Start":"08:12.870 ","End":"08:15.420","Text":"subassemblies, as noted here in the Fusion"},{"Start":"08:15.420 ","End":"08:18.430","Text":"360 browser with the sub-assembly icon."},{"Start":"08:19.420 ","End":"08:21.310","Text":"If I toggle open the first tire"},{"Start":"08:21.320 ","End":"08:23.206","Text":"subassembly you’ll see it has all"},{"Start":"08:23.206 ","End":"08:25.150","Text":"the components nested within it,"},{"Start":"08:25.390 ","End":"08:27.340","Text":"hence why it’s a sub-assembly."},{"Start":"08:28.750 ","End":"08:29.970","Text":"The last thing I want to do"},{"Start":"08:29.970 ","End":"08:31.620","Text":"in this animation is manually"},{"Start":"08:31.620 ","End":"08:33.300","Text":"explode the subassemblies."},{"Start":"08:34.680 ","End":"08:37.050","Text":"I’ll move the playhead to 11 seconds."},{"Start":"08:37.549 ","End":"08:39.449","Text":"Then, I’ll hold down the shift key"},{"Start":"08:39.490 ","End":"08:41.409","Text":"and select all the tires at the top."},{"Start":"08:41.419 ","End":"08:46.030","Text":"I’ll hit the keyboard shortcut letter"},{"Start":"08:46.060 ","End":"08:48.790","Text":"“E” for manual explode and then I’ll"},{"Start":"08:48.790 ","End":"08:51.280","Text":"choose the arrow on the “X” axis."},{"Start":"08:54.780 ","End":"08:56.369","Text":"Once again, we’ll also have to set"},{"Start":"08:56.370 ","End":"08:58.699","Text":"the explosion scale… and I’ll move"},{"Start":"08:58.699 ","End":"09:00.670","Text":"it until the tires are about their"},{"Start":"09:00.699 ","End":"09:02.610","Text":"own length away from the axles."},{"Start":"09:04.360 ","End":"09:05.830","Text":"To save the changes I’ll"},{"Start":"09:05.830 ","End":"09:07.390","Text":"select the green checkmark."},{"Start":"09:09.870 ","End":"09:11.540","Text":"I’ll now repeat the previous"},{"Start":"09:11.540 ","End":"09:13.250","Text":"step on the lower tires."},{"Start":"09:14.170 ","End":"09:16.260","Text":"I’ll hold down the shift key and select"},{"Start":"09:16.300 ","End":"09:19.709","Text":"all of them, and then hit the keyboard"},{"Start":"09:19.710 ","End":"09:22.880","Text":"shortcut letter “E.” I’ll drag the"},{"Start":"09:22.880 ","End":"09:25.030","Text":"explosion slider until the tires are"},{"Start":"09:25.030 ","End":"09:27.670","Text":"moved away from the center axles, and"},{"Start":"09:27.670 ","End":"09:29.800","Text":"then I’ll select the green checkmark."},{"Start":"09:31.540 ","End":"09:34.049","Text":"I’ll also drag the playhead over another"},{"Start":"09:34.049 ","End":"09:36.670","Text":"second or so...and I’ll hit this top-left"},{"Start":"09:36.670 ","End":"09:39.430","Text":"view to record that in the timeline below."},{"Start":"09:41.130 ","End":"09:43.090","Text":"Before we hit play to take a look"},{"Start":"09:43.090 ","End":"09:44.920","Text":"at these changes… I want to drag the"},{"Start":"09:44.920 ","End":"09:47.270","Text":"explode actions for the tires to the"},{"Start":"09:47.270 ","End":"09:50.129","Text":"left so they animate a bit longer."},{"Start":"09:50.719 ","End":"09:52.809","Text":"To do them all at once I’ll simply"},{"Start":"09:52.809 ","End":"09:55.030","Text":"hold down the shift key and then select"},{"Start":"09:55.050 ","End":"10:02.829","Text":"all of them… Then I’ll drag the left"},{"Start":"10:02.830 ","End":"10:05.069","Text":"slide over to about 8 seconds or so…"},{"Start":"10:06.370 ","End":"10:08.050","Text":"Now I’ll hit the back to the beginning"},{"Start":"10:08.050 ","End":"10:09.810","Text":"button and then the play button"},{"Start":"10:09.860 ","End":"10:11.530","Text":"to take a look at the animation..."},{"Start":"10:13.189 ","End":"10:15.170","Text":"The last thing I want to show you before"},{"Start":"10:15.170 ","End":"10:17.400","Text":"covering how to export the animation is"},{"Start":"10:17.400 ","End":"10:20.270","Text":"how to leave an annotation or 3D callout."},{"Start":"10:21.690 ","End":"10:23.610","Text":"Annotations are a great way to leave"},{"Start":"10:23.620 ","End":"10:25.880","Text":"notes on the animation, which can remind"},{"Start":"10:25.880 ","End":"10:28.169","Text":"you or a colleague to fix part of a"},{"Start":"10:28.170 ","End":"10:30.620","Text":"model before the animation is completed."},{"Start":"10:31.660 ","End":"10:33.730","Text":"For example, if I wanted to leave"},{"Start":"10:33.760 ","End":"10:36.600","Text":"an annotation to change the tire-rim"},{"Start":"10:36.600 ","End":"10:38.790","Text":"to aluminum… I could simply click"},{"Start":"10:38.790 ","End":"10:40.490","Text":"the annotation command in the"},{"Start":"10:40.490 ","End":"10:43.150","Text":"toolbar, and select the tire rim."},{"Start":"10:44.090 ","End":"10:45.750","Text":"After typing out the note I’ll"},{"Start":"10:45.750 ","End":"10:46.459","Text":"select the green checkmark."},{"Start":"10:48.119 ","End":"10:50.560","Text":"Now if I replay the animation you’ll"},{"Start":"10:50.560 ","End":"10:55.460","Text":"see that the callout appears...and"},{"Start":"10:55.470 ","End":"10:56.930","Text":"it’s important to note that the"},{"Start":"10:57.040 ","End":"10:59.020","Text":"callout will appear in an exported"},{"Start":"10:59.030 ","End":"11:02.040","Text":"animation unless you hide or delete it."},{"Start":"11:03.410 ","End":"11:05.280","Text":"To hide it simply toggle open the"},{"Start":"11:05.280 ","End":"11:08.010","Text":"callouts folder in the Fusion 360 browser."},{"Start":"11:08.620 ","End":"11:10.600","Text":"Then, select the light bulb"},{"Start":"11:10.600 ","End":"11:12.670","Text":"icon to toggle it on or off."},{"Start":"11:13.490 ","End":"11:15.330","Text":"If you’d like to delete it simply"},{"Start":"11:15.330 ","End":"11:17.440","Text":"right-click on it in the browser or in"},{"Start":"11:17.440 ","End":"11:20.260","Text":"the canvas window… and select “delete.”"},{"Start":"11:22.100 ","End":"11:23.910","Text":"Now to export the animation I’ll"},{"Start":"11:23.910 ","End":"11:25.550","Text":"select the keyboard shortcut letter"},{"Start":"11:25.560 ","End":"11:28.349","Text":"“P” or select Publish in the toolbar."},{"Start":"11:29.980 ","End":"11:31.170","Text":"Then, you’ll notice that we"},{"Start":"11:31.170 ","End":"11:33.160","Text":"have to select the video scope."},{"Start":"11:34.590 ","End":"11:36.800","Text":"If we had created multiple storyboards"},{"Start":"11:36.950 ","End":"11:38.319","Text":"then we could have this set to"},{"Start":"11:38.320 ","End":"11:40.290","Text":"export all the storyboards within"},{"Start":"11:40.290 ","End":"11:43.200","Text":"one single file… but for our case,"},{"Start":"11:43.230 ","End":"11:44.380","Text":"we’ll select “current storyboard.”"},{"Start":"11:46.780 ","End":"11:48.569","Text":"Below that, you’ll see that you can"},{"Start":"11:48.570 ","End":"11:51.260","Text":"select a resolution from a preset list,"},{"Start":"11:51.320 ","End":"11:53.900","Text":"or you can define a specific resolution."},{"Start":"11:54.870 ","End":"11:56.580","Text":"I’ll select the highest resolution"},{"Start":"11:56.580 ","End":"11:58.550","Text":"on the list...and then click okay…."},{"Start":"11:59.400 ","End":"12:01.030","Text":"And I’ll check the box to save"},{"Start":"12:01.030 ","End":"12:02.840","Text":"this file to my downloads folder."},{"Start":"12:04.360 ","End":"12:05.689","Text":"This will take a few minutes"},{"Start":"12:05.690 ","End":"12:06.910","Text":"depending on the length and"},{"Start":"12:06.910 ","End":"12:08.860","Text":"complexity of your animation."},{"Start":"12:14.849 ","End":"12:16.790","Text":"Once done you’ll see that you can"},{"Start":"12:16.790 ","End":"12:18.920","Text":"open the “.mp4” file and of course"},{"Start":"12:18.920 ","End":"12:21.010","Text":"you can use that file as you please."},{"Start":"12:22.640 ","End":"12:24.530","Text":"Hopefully, this animation demo"},{"Start":"12:24.560 ","End":"12:26.540","Text":"gives you guys a high-level overview"},{"Start":"12:26.580 ","End":"12:29.520","Text":"of using the animation workspace."},{"Start":"12:29.520 ","End":"12:31.180","Text":"As you can imagine, this workspace"},{"Start":"12:31.200 ","End":"12:32.950","Text":"can be pretty powerful if you’re"},{"Start":"12:32.950 ","End":"12:35.419","Text":"trying to demo or explain a product"},{"Start":"12:35.440 ","End":"12:37.150","Text":"that has many components that make"},{"Start":"12:37.160 ","End":"12:38.870","Text":"up the assembly...Whether you’re"},{"Start":"12:38.870 ","End":"12:40.660","Text":"trying to animate how a product"},{"Start":"12:40.660 ","End":"12:42.650","Text":"is used or how it’s assembled."}],"ID":29013}],"Thumbnail":null,"ID":275347}]

[{"ID":275346,"Videos":[28962,28963]},{"ID":275347,"Videos":[28984,28985,28986,28987,28988,28989,28990,28991,28992,28993,28994,28995,28996,28997,28998,28999,29474,29001,29475,29002,29003,29004,29005,29006,29007,29476,29009,29010,29011,29012,29013]}];

[28984,28985,28986,28987,28988,28989,28990,28991,28992,28993,28994,28995,28996,28997,28998,28999,29474,29001,29475,29002,29003,29004,29005,29006,29007,29476,29009,29010,29011,29012,29013];

1

16